Micbias value set does not take effect on rouleur.
Shift micbias value to correct bits.
Change-Id: Ice083e3bc30f6e8e3fe7132c633a4043329ccfa5
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
RX Master does not support div2 clk switching as div2_en bit
for rx master is floating. Do not do clk switch for rx master.
Change-Id: Iee1716fe892e792ffd17d0861a807e3711cee5d5
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Update MSB of sample interval in the frame shape
to avoid misconfiguration.
Change-Id: I05e99bc563f6cdc71c7caf424441c4caa44ec4c6
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Update HPHL and HPHR sequence to avoid clicks and pops
by setting the LDIV and RDIV values in HD2
coefficients and increasing ramp time.
Change-Id: Ib47d14255a098511393b4b75392854c8b34dc0d3
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Mute is observed in amic record sometimes in concurrency with
sva. This is because if record is over tx0 then digital clk
is not enabled. Enable clk after enabling micbias to resolve mute.
Change-Id: Iba3aa4fade0ac5889218eaee2c5d2c4bd4431d50
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Enable compander based on mixer ctl set for ear path.
Change-Id: Ie6287469f1baa9dba239d369bd5a29ed8e44522f
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
In order to reduce the LPI memory consumption,
reduce the apps wake up latency from 250msec
to 40msec in LAB module config.
Change-Id: I5451e2b43b81ce7c6f8840f774b74e3cffc0a032
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Remove wsa soundwire device from master device list only during
critical error and not for probe defer.
Change-Id: I5c4f71a4735de4bb459094043d41a6b5c560a6fd
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
For bolero 2.1 with SWR_TX in va macro, update SVA fixes.
Change-Id: I250df0fe476bc2c0439ab491a17dea2e7ac18707
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Do not compile audio sources for VM image for lahaina.
Guard the source path against CONFIG_QTI_VM to decide to
compile it are not.
Change-Id: Ib58f2b8c5c26435faf1425ef79a7ece92cdf77c9
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
Overflow/Underflow errors are observed sometimes while doing fifo write.
Add delay between writes to resolve error.
Change-Id: Id460e17753001a0dd52acd01a181d91132c36048
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
If button press and release interrupts occur at same time
processing button release first would treat the button event
as fake, as it is not preceeded with press event. Hence
process button press before button release in irq driver.
Change-Id: I36d5ad8a3571f4bd32d309a060a6988f29ff27ad
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Moisture detection is not disabled properly if threshold
remains set as 24k even if duty cycle is disabled.
This is leading into headset not getting detected
sometimes. Disable threshold as well if duty cycle disabled.
Change-Id: Ic90c65d8bbaa965cf147f95edf5add8980889e1f
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
When DSP returns error in clock or vote request
commands, update the clock status variable properly
to bail out from error scenarios.
Change-Id: Ib50e9e33b03fd77255b8719c125612686ea11b00
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Signed-off-by: Meng Wang <mengw@codeaurora.org>
When LPI SVA is enabled, start recording and stop LPI SVA, wakeup irq
is not deregistered as tx_swr_clk_cnt is not 0. Add new check for
va_swr_clk_cnt to resolve the issue.
Change-Id: I441394f26b42f554169400194d021309ef70af9e
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Add rouleur codec support in bengal machine driver
to create codec entry and invoke mbhc hs detect
functions for respective codecs. Correct the logic
for headset detection pull up current and
volatile registers for digital part of rouleur codec.
Change-Id: I22545dc796c215c1501e883796546c97d8ca8698
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
