To pass WFA 11N 4.2.25 case, it's needed to enable legacy mode
SIFS burst. So add INI to make SIFS burst mode configurable.
Change-Id: I740fe33a7ae0d9b558aa3b3aeee434f482ed24cb
CRs-Fixed: 2486171
Devide wma_add_bss_sta_mode into 4 functions for 4 cases:
1. wma_pre_assoc_req, called before sta assoc, config vdev
params.
2. wma_send_peer_assoc_req, called after sta associated, send
peer assoc cmd to F/W.
3. LFR3 add bss
4. LFR2 add bss and vdev start
Lim will call these functions directly instead of post msg to
wma.
Replace lim_set_link_state with wma_add_bss_peer_sta to create
peer for LFR2 roaming.
Clean up all link state usless code now.
Change-Id: I6ad19bb92e7b0334704ac9c930277e9c35abbee2
CRs-Fixed: 2510119
To build multiple ko files, android build system will
generate some temporary dirs, names of wihch are started
with '~'.
Replace these '~' with '.' to hide the temporary dirs.
CRs-Fixed: 2522153
Change-Id: Ic2606afee07c068803fd9b0446d20851e1e06e03
Introduce a new Kbuild option 'WLAN_CFG_OVERRIDE' to override
wlan configurations.
Value of this option is a list, which includes the config items
those need to override, its pattern is as below:
WLAN_CFG_OVERRIDE="WLAN_CFG_1=n WLAN_CFG_2=y WLAN_CFG_3=n"
For LA build, it makes use of this Kbuild option, and introduces
new android build options for different products:
WLAN_CFG_OVERRIDE_wlan: for single wlan driver case.
WLAN_CFG_OVERRIDE_<chip>: for multiple wlan drivers case, for
example WLAN_CFG_OVERRIDE_qca6390 and WLAN_CFG_OVERRIDE_qca6174.
Change-Id: I8e062c62d36e076a79032a47aa04501d4543a9c8
CRs-Fixed: 2515905
Currently, the connection_in_progress flag in hdd_ctx is not reset
as part of SSR this can lead to scan reject after SSR.
Change-Id: Icc7889eb3140f02dd100d05e812d5573ebcae63c
CRs-Fixed: 2516937
Switch legacy vdev up to vdev mgr/target if vdev up
Remove wakelock since it is handled in target if.
Clean up legacy vdev up API.
Change-Id: I125b202e9a18ee3bf279fe4df7bc17b9ec7bf999
CRs-Fixed: 2516586
In Genoa SDIO ADMA implementation Host sends packets to FW in
multiples of SDIO Block size.
If the packet/bundle is not block aligned Host adds padding at the
end of Packet/Bundle.
If the TX packet plus padding exceeds one FW TX Buffer, Padding data
will occupy the next FW TX buffer. Same applies for bundle TX packet.
For above scenario, HTC_FLAGS_PADDING_CHECK of HTC header Flags is used
to notify the FW that - Padding data follows the currentHTC packet
Since the padding data will take one extra FW Tx Buffer, host need to
handle the extra Tx credit being used by the padding data/buffer
CRs-Fixed: 2516619
Change-Id: Ie2d2292fabb30e1a13eebe4d11b57f452e42afa8
ANI_AKM_TYPE_SAE is defined only when WLAN_FEATURE_SAE defined.
But it is used without any checking in function lim_check_wpa_rsn_ie().
If WLAN_FEATURE_SAE is disabled, build error will occur.
It is easy to fix it to add '#ifdef WLAN_FEATURE_SAE' in function
lim_check_wpa_rsn_ie(). But coding rule, '#ifdef WLAN_FEATURE_SAE' isn't
allowed to occur in function. So, move '(*akm_type == ANI_AKM_TYPE_SAE)'
to function lim_check_sae_pmf_cap().
Change-Id: Id62bc69d770dbd4e470d8fa379b4cb3f7447d9dc
CRs-Fixed: 2508071
With vdev operations moved to target if from the wma, the vdev
request hold framework is not used.
Thus remove the unused functions and structures
Change-Id: I6e609735ad0bdc8b929cfffa6f13915f0ad6823d
CRs-Fixed: 2523104
In function hdd_softap_set_channel_change, vdev is passed to
function wlan_vdev_mlme_get_opmode without taking reference.
This can lead to NULL pointer access.
Change-Id: Ibbc58a1e7a4be0e0e34982b99541a63cd77e0480
CRs-Fixed: 2518560
Local peer_id is being cleaned up across DP, HDD and PS/WMA.
So, any references to local peer_id/sta_id will be replaced
by peer mac address and all interactions between the layers
will be based on peer mac address.
This change invloves updating the vdev_id for the network buffer list
in hdd_rx_pkt_thread_enqueue_cbk for later use in
dp_rx_thread_process_nbufq.
Change-Id: Ibaf5c10a7fe77772d2eea2a10398e0116fdd0344
CRs-Fixed: 2522201
Local peer_id is being cleaned up across DP, HDD and PS/WMA.
So, any references to local peer_id/sta_id will be replaced
by peer mac address and all interactions between the layers
will be based on peer mac address.
This change invloves removal of local_peer_id usage from
DP API dp_rx_thread_process_nbufq.
Change-Id: Ibfed421df3ace139808d16365ec5d54e9b013dfe
CRs-Fixed: 2512693
Cache the PMF capability of peer in peer_mlme_priv_obj while
adding bss for both station and AP modes. Process the mgmt frames
received from the peer as rmf frames only if the peer is of PMF
capable.
Move mlme_peer_object creation and deletion out of the define
CRYPTO_SET_KEY_CONVERGED to make it generic.
Remove the check where WEP bit is validated and modified based on
PMF capability of the peer. This is already taken care while
setting WEP bit in lim.
Change-Id: I0c93bb25db6a866e4c1793c9ba4c60773c0f019d
CRs-Fixed: 2520249
The qcn and ese arrays are dynamically recreated on every call of the
functions sme_add_qcn_ie and csr_append_assoc_ies.
Change the initializers to static const to avoid dynamic recreation.
Change-Id: Ib3ae9a1b753c4dcfb6d8fd440050977253f3e720
CRs-Fixed: 2522716
Vdev start req timeout is moved to target if.
Req msg type can be got from vdev mlme instead of wma rsp queue
in vdev start rsp handler.
Set bss params into vdev mlme priv when start vdev with add bss.
then can get bss params from vdev mlme priv when handle start
vdev add bss rsp.
Free hidden ssid vdev req after vdev restart return, don't need
it when handle rsp.
Change-Id: I956fc5a9164d5961513dfa922aee27af28483807
CRs-Fixed: 2516587
Use vdev_start_response to replace tpSwitchChannelParams
parameter in channel switch response handler.
Lim channel switch resp handler will be called directly, don't
use post msg.
Use vdev id to replace tpHalHiddenSsidVdevRestart in hidden
ssid response handler.
Change-Id: Ida0bfed3fea1cc0ff28ed15832765d446296f3be
CRs-Fixed: 2516582
While filling the QCN IE the IE length filled is 11 while actual
length is 8 and thus this lead to improper IE length in scan
additional ie while copying the default_scan_ies.
So fix the QCN IE length and add check for improper IE length check
while copying IE in scan additional ie.
Change-Id: I372af8c206d8f7ce0e93bc9c0fb14e222c6eb87e
CRs-Fixed: 2522208
Use 64 bit HTT header instead of 32 bit &
Enable CONFIG_QCN7605_SUPPORT for Genoa SDIO
Enable CONFIG_PLD_SDIO_CNSS2 for Genoa SDIO
CRs-Fixed: 2520815
Change-Id: Ib94bb2f24db838dcec7ad037a2c9149c8183b0c8
As a part of vdev convergence, legacy vdev code for vdev delete/stop/
down is removed. WMA timer for vdev manager operations are deleted,
now target_if takes care of it.
Structure del_bss_params is no more used to store bss delete request
params, hence struct del_bss_params is cleaned up from legacy code.
Change-Id: I487d2683908b705176ff8064dd3ce7cd49a3ce47
CRs-Fixed: 2517880
Add a wait for PM freeze when wifi is turning on to make sure file system
and QMI are still accessible before attempting to download the FW and
trigger a QMI handshake with FW.
Change-Id: Ia2f3dc28abb9cab4b5dd8038ea02ac016eb74bbb
CRs-Fixed: 2521009
Time stamp for profiling system level power issues is currently using
qdf_get_system_timestamp(), which measures in milliseconds. To get more
fine granular data, use qdf_get_log_timestamp_usecs() to measure in
microseconds instead.
Change-Id: I920d0ec7c90ab602cbdc0d1efdb6061d6a72c122
CRs-Fixed: 2520939
The spin lock APIs are accessed from wake MSI hard irq handler as well,
causing deadlock. To solve this, change spin lock APIs to use spin lock
IRQ.
CRs-Fixed: 2519986
Change-Id: I4d05abd294a71a26915210ae7e2be9be6aa7a996
