Replace the obsolete WMI command WMI_SOC_SET_HW_MODE_CMDID with
WMI_PDEV_SET_HW_MODE_CMDID and event WMI_SOC_SET_HW_MODE_RESP_EVENTID
with WMI_PDEV_SET_HW_MODE_RESP_EVENTID respectively. These new WMI
commands and events additionally carry the pdev id and all mac id
references are replaced with pdev id.
Change-Id: If2a3f93dcd1947eedce8d4eac8ed936166f7e078
CRs-Fixed: 989502
Replace mac_id with pdev_id for WMI pdev commands and
vdev start response handler to support multi-radio in
converged firmware. In order to maintain backward
compatibility with old fw, host needs to check
WMI_SERVICE_DEPRECATED_REPLACE service id in service
bitmap and needs to fill pdev id or mac id accordingly.
Change-Id: I7e6b40b4c0bd20e967dc0a383b480068e256486f
CRs-Fixed: 994415
WIN platform uses non-tlv implementation for host to
target wmi commands. Add support for non-tlv
implementation in common wmi layer.
Change-Id: I1f832695b0d41b521be6b18df0cad31aae11b6c9
Acked-by: Kiran Venkatappa <kiranv@qti.qualcomm.com>
CRs-Fixed: 1005778
Replace the obsolete WMI command WMI_SOC_SET_PCL_CMDID with
WMI_PDEV_SET_PCL_CMDID. WMI_PDEV_SET_PCL_CMDID carries the weightage
for all the channels (preferred and non-preferred) in the same order
and length as that of the command WMI_SCAN_CHAN_LIST_CMDID. This is
in contrast to the command WMI_SOC_SET_PCL_CMDID which carries only
the preferred channel list.
Change-Id: I040f4307491d3242d2e9409dbbe8005c4b307bf5
CRs-Fixed: 989502
qcacld-2.0 to qcacld-3.0 propagation.
Fix compilation error introduced due to change in WMI
interface structure definition changed by CL 1479065.
Change-Id: I83d50bc046961ab90bcfbb164d5d64296ff95d9f
CRs-Fixed: 865207
qcacld-2.0 to qcacld-3.0 propagation.
WMI change to enable Custom aggregation size for ADDBA request and
response through WMI command WMI_VDEV_SET_CUSTOM_AGGR_SIZE_CMDID.
Change-Id: I0fb54e8f32344b209787239ed64d7ecb13ea56fb
CRs-Fixed: 865207
Propagation from qcacld-2.0 to qcacld-3.0.
Periodic channel stats and WMI chan info extension
Define a flag which indicates the packet responsible
for wake up the host from suspend mode
Change-Id: Ieb5f47f16c5f55790511e02d97db57f4fdf6de97
CRs-Fixed: 865207
qcacld-2.0 to qcacld-3.0 propagation
add a wmi command to enable/disable channel
avoidance report event from firmware
Change-Id: Ic84728b315b4729470238098a91ef6bb629b3f7b
CRs-Fixed: 865207
qcacld-3.0 to qcacmn propagation
Enhanced mcast filtering for incoming packets that have
multicast IP but unicast mac
Change-Id: Id50d9130f050ec9a948fdba9931c88b9111bb6ad
CRs-Fixed: 865207
If HT SMPS is enabled and if the session supported NSS > 1
then include SMPS IE in the HT capabilities of the association
and the reassociation management frame.Enabling SMPS with an AP
whose capability is only 1x1 will result in association/reassociation
request being rejected or an unexpected behavior. Send SMPS force mode
to FW to trigger SMPS action frame only if SMPS is enabled in the
INI. For dynamic antenna switch, the chain mask manager will send
the SMPS action frames.
CRs-Fixed: 931250
Change-Id: Ifff2ef2c8790994a68e676b8bba2fb03c21370d4
qcacld-2.0 to qcacmn propagation
In High dense environment roaming should be triggered early
at dense RSSI threshold which provide better throughput result.
Add support for dense roaming parameters to read from ini file
and send to FW with other roaming parameters
CRs-Fixed: 953579
Change-Id: Ia63bfdd1248b4507d988b019f07164a7c75566af
Add gtk offload enable/disable macros and use them
while copy keys and replay counter.
Change-Id: Ifdd776bc0c567d6c815ab5cb3eb212a43889b5a5
CRs-Fixed: 987362
Replace Linux return type with QDF_STATUS to have uniformity
across common wmi layer.
Change-Id: I74730602c6b20fb240182afd7c6e5ec6b3fcfd55
CRs-Fixed: 987362
Move tlv formation of wmi setup key installation commands from umac to
common wmi layer.
Change-Id: I51250a9b1b6bb5aed06657b9f88f4659430f4c74
CRs-Fixed: 987362
Move tlv formation of wmi vdev start/restart commands from umac to
common wmi layer.
Change-Id: Id040983068ff610e68880dd5f503edf9b9c8cff9
CRs-Fixed: 987362
Replace mac_id with pdev_id, add vdev_id to peer commands/events
and change reserved0 to pdev_id in PDEV commands.
Change-Id: I2f659159fa2f0d023650eae68b6d3115aac379b0
CRs-Fixed: 983619
wmi rx event context can be modified at runtime by
upper layers. Protect rx execution context for wmi events
to avoid race conditions.
Change-Id: I7eed7108d09f8f39432990b2ebfef29a41bfa9aa
CRs-Fixed: 983619
Adapt common wmi layer with converged os abstraction layer.
Remove references to non-converged header files from
wmi layer.
Change-Id: I3671a40604fa1a5f10a5a67106db33f382e0f335
CRs-Fixed: 983619
Move tlv formation of wmi scan roaming and management commands from umac to
common wmi layer.
Change-Id: I99b2651c0054d03e58da697ab7b902b5629eeb4a
CRs-Fixed: 983619
Remove hard-coded rx execution context of wmi event callbacks.
UMAC layer needs to register execution context while registering
events with wmi layer.
Execute wmi rx event callbacks in following context-
1) work queue context provided by wmi layer.
2) umac provided context, umac can choose to
execute in thread context or default tasklet context
based on umac implementation.
CRs-Fixed: 978619
Change-Id: Id9b1f1e5157e8a203f93a62791f85a8145cc1599
Add common unified API and tlv/non-tlv callback wrappers.
Add tlv implementation of common MCL/WIN API.
CRs-Fixed: 978603
Change-Id: I7e70b48ef5e1df0c0f81c639579e6eb1a6685dc3
Modify wmi handle and wmi unified interface API
for common wmi layer.
Register UMAC callbacks using opaque callbacks.
CRs-Fixed: 978579
Change-Id: I505fe4ac339213db30bb00695234c4cfea5a5908
Add new directory structure and new files for
tlv and non-tlv implementation.
wmi layer shall not use global context of other layer,
remove global context and unused methods.
CRs-Fixed: 978547
Change-Id: I230f59052d9db8e1660cc087b09e03641227f490
