Extract EML and MLD Capabilities from Target via
wmi_service_ready_ext2_event. These values can be
used while advertising EML and MLD Capabilities.
Add helper function to get EML related delays in
Micro Secs from values got from EML and MLD advertisments.
Send EML Capabilities received from node to Target
via WMI_PEER_ASSOC.
CRs-Fixed: 3225495
Change-Id: Ibfa2ff8dbf11d4293125331376a7986e611d5f63
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the target SW to
indicate the different capabilities of the Spectral HW.
Add support to process this event and extract the capabilities.
Change-Id: I03b3236b6def98d24e77b2a9ea51ee866e62e6fe
CRs-Fixed: 3238450
Add following fixes for STA to support and operate in
eMLSR mode
1) Update and send eMLSR cap flag to FW even in vdev start
request on both links.
2) Copy EML caps to wmi peer assoc mlo params to send it
to FW.
Change-Id: Ic17b9b82809659d7a4392c09eceecae7c53b2049
CRs-Fixed: 3237737
btcoex status is not extracted in the extract_roam_scan_stats_tlv()
which was required for ROAM_SCAN_DONE event logging due to
which wrong status is printed in ROAM_SCAN_DONE
logging.
Extract bt_coex status in the extract_roam_scan_stats_tlv()
in order send correct value of bt_coex status for
ROAM_SCAN_DONE logging.
Change-Id: I45ee27e5b8a52b79954dceb9f3cdc46870b7a48d
CRs-Fixed: 3236401
Add infra to support Dedicated Bluetooth Antenna Mode (DBAM)
feature. It is used to switch between dedicated antenna for
BT and shared antenna for WLAN and BT.
Change-Id: I21688093674ef9b63ee811df9168a31bd71c56b5
CRs-Fixed: 3239895
Add support for initiate pasn authentication using the vendor
command: QCA_NL80211_VENDOR_SUBCMD_PASN
Fill the below required attributes to initiate PASN:
QCA_WLAN_VENDOR_ATTR_PASN_ACTION
QCA_WLAN_VENDOR_ATTR_PASN_PEERS
QCA_WLAN_VENDOR_ATTR_PASN_PEER_MAC_ADDR
QCA_WLAN_VENDOR_ATTR_PASN_PEER_SRC_ADDR
Change-Id: If33f54eafe5986b4571cc21a80fb0b61578db116
CRs-Fixed: 3232261
Rate-limiting will be based on number of beacons received.
When the beacon is not from connected AP, the beacons
are dropped on a percentage of received beacons and
rate limit, which is configured by the user.
CRs-Fixed: 3230508
Change-Id: Iac591c37129fda6923ef254c2950cb0bdbb44ce9
Use ch_freq instead of chan_num while using tdls_ch_params
structure. As chan_num no longer exists and is replaced by
ch_freq.
Change-Id: Ifd6fd49e201b97a16294bad6c6e4ae49a04c380f
CRs-Fixed: 3234931
-Wimplicit-fallthrough is being enabled by default. Some compilers
such as clang require the attribute instead of just a fallthrough comment.
Change-Id: If7b79684df22441de75447dda84d22576573bfc5
CRs-Fixed: 3218242
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_CMDID: Add support
for a new roam command to get vendor control parameters
from FW. Host needs to send proper param ID in command
(from enum WMI_ROAM_GET_VENDOR_CONTROL_PARAM_ID)
to get corresponding INI value from FW.
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_EVENTID:
Add support for a new roam event to get param value
from FW. FW sends this event upon receiving
WMI_ROAM_GET_VENDOR_CONTROL_PARAM_CMDID command.
Change-Id: Ic7b3badb14daff183dd36927b4dae6bbc036e6cd
CRs-Fixed: 3225166
Add bt_coex active field in roam scan done info as
part of roam stats event handler.
Change-Id: Ief31efe491bede5ae4571bf0f5ace284aa6ea0fe
CRs-Fixed: 3226707
Add change to fetch and save the WMI service capability
bit of FW to support vendor handoff control feature
using service bit.
Change-Id: I6bc85f2807032bf84d391f34c814c91de906ab42
CRs-Fixed: 3225147
Enable bits in WMI_INIT command to let the FW know about host's
capability to support notify frame feature. If the feature is enabled,
host can mark certain TX frames as "notify frames" for hardware and they
need not be sent to FW. FW depends on this capability exchange to decide
whether to install HW rules for frames to be sent to HW.
Change-Id: I7158e79ae0fbdc73a2f4096ae1577337e8291246
CRs-Fixed: 3209399
This enables the option to configure when a peer's
TID queue needs to be flushed. This is required to
discard packets that are no longer useful to the application.
Change-Id: I558debff043fc0c8038e5f5f2c815b64c90e1561
CRs-Fixed: 3130422
Add eMLSR support for ML STA. It consists of 2 changes-
1) Since POLICY_MGR_HW_MODE_EMLSR_MODE_BITPOS macro has value of 32, a new
SET BIT function has been implemented to accommodate the 64-bit operation.
2) Add eMLSR related params to peer assoc mlo param struct to update FW
via peer assoc request.
Change-Id: I6e54c632677eacabc57338b0f159d97023b100f2
CRs-Fixed: 3185010
Add WMI command for tx peer filtering. This command is needed to send
the mac address to FW for which tx monitor peer filtering is needed
to be done.
Change-Id: Ia141fba81ba240b7f4ca015eb9251e3485294bb6
CRs-Fixed: 3199493
Send connected links bitmap to FW via a command:
WMI_REQUEST_STATS_EXT_CMDID in case of MLO connection.
Change-Id: I8ea88b0474769a56f5efa0cd006ba515e858accf
CRs-Fixed: 3149043
Critical update is the explicit signaling for STA to notify
any change in BSS param.
There are two categories of critical update params.
Category 1 elements: CSA, ECSA, Quiet, Quiet channel,
Max Ch Switch Time, that are directly included in
the per-STA profile of partner AP.
Category 2 elements: Except category 1 all operational IEs
HT/VHT/HE/EHT and WMM/EDCA/MUEDCA params.
Defined below vdev flags to track change in Category 1 and
Category 2 CU params per ML VDEV
WLAN_VDEV_OP_CU_CAT1: Change in category 1 param
WLAN_VDEV_OP_CU_CAT2: Change in category 2 param
Host notify to FW by updating current link CU param in
wmi_bcn_tmpl_ml_info TLV of BCN TMPL CMD.
Set the corresponding cu_vdev_map category 1 / category 2
based on change in critical update params of ML VDEV.
Change-Id: I8fe71309ab92a459524bdc5739f8b4a4a545562e
CRs-Fixed: 3199331
Add WMI parameters to support delta tsf calculation based on the
use_tqm_timer flag.
Change-Id: I6346f0b661bdede56874f4589f4dcc4d8b95c439
CRs-Fixed: 3193329
Set num_max_active_vdevs to WMI init command and
extract it from WMI ready event.
Change-Id: I6d6377c03214fcab74c675839f136301ebf27834
CRs-Fixed: 3183010
As part of MLO stats feature, add support to send ll_stats
and get_station stats request to firmware for all the MLO vdevs.
Change-Id: Ic50a6294f868f0604d4cfc0d4b657b6085da2fb4
CRs-Fixed: 3181020
Add mapping of wmi_vdev_param_set_traffic_config
to WMI_VDEV_PARAM_VDEV_TRAFFIC_CONFIG.
Change-Id: I2147cad3fb5726551de64edcfc41bee2707150a6
CRs-Fixed: 3191504
Add init sequence handling to support AFC device deployment type
Set AFC device deployment type to regulatory private obj
Change-Id: Ib041d2010552412aaaa41395915d948aa2ea2bba
CRs-Fixed: 3190288
Userspace sends the vendor command WIFI_TEST_CONFIGURATION by
setting the attribute WIFI_TEST_CONFIG_IGNORE_H2E_RSNXE when
driver needs to ignore the SAE H2E mismatch for 6 GHz connection.
This is needed for certification test support
Change-Id: I5c1838598478ab74d72d57a765452d7fd989b701
CRs-Fixed: 3072578
Add support in wmi to handle below new RTT PASN events:
WMI_RTT_PASN_PEER_DELETE_EVENTID
WMI_RTT_PASN_PEER_CREATE_REQ_EVENTID
Change-Id: Ib33c2def2d7ef66a6a2717e2a8e1756ab4318e4d
CRs-Fixed: 3150069
Add WMI changes to send TID-to-link mapping to FW as part of peer assoc
command and as part of WMI_PEER_TID_TO_LINK_MAP_CMDID.
Change-Id: Ia3a8fb10d49e1d54d6f4f418be3f684bc0147c5c
CRs-Fixed: 3183734
Use the PPDU duration given by FW to find the end time
stamp of management frames.
CRs-Fixed: 3181500
Change-Id: Ibabe82c8e2d3cd7e494e764a9a2baeded89a7300
Copy Engine(CE14) is used for diag events on qcn9224. Add changes to
configure this CE as dest ring and fix diag event handler to use
wmi_handle from first pdev similar to other WMI events.
Change-Id: I314939169f9be32cd277af68dcd3ef7a0eb06187
CRs-Fixed: 3177987
cal version is included in EXT2 svc ready message to indicate the bdf
and ftm version to host. Add API to extract this from ext2 message.
Change-Id: I83f4d6e83a3f78f993b40527aed7291c6496777c
CRs-Fixed: 3182634
pdev_id and hw_link_id is included in same uint32. Lower 16 bits are for
pdev_id and higher 16 bits are for hw_link_id. Use proper macro to get
pdev id from mac_phy_caps.
Change-Id: I91806c0fba63767efa0105df5697dd685f38b819
CRs-Fixed: 3182651
