1. Changes to move hal_tx_config_rbm_mapping_be function from common to
device specific as it has ppe related snippets.
2. Changes to remove all PPE related codes in QCA5332 hal code.
3. Changes to correct macros according to fw_hrs.
4. Changes to move functions with device specific Macros to header files
so that it gets compiled with respective device's FW headers and gets
correct Macros
Change-Id: I479b406f318aa42d2b1032349aaf42d95b8c18e5
CRs-Fixed: 3235966
Currently while sending nbuf to rx fate logs
we are not removing rx tlv before sending nbuf
to logger which is causing issue of incorrect
packet type issue.
To Fix issue make changes to make sure that
rx tlv is removed and nbuf length is set
Change-Id: Ib56c8e009398b3410c43be910feb4048bfb06b54
CRs-Fixed: 3241828
Add change to support deletion/cleanup of AST entries on host
for BE platforms(Waikiki) based on peer map and unmap event received
from FW.
Change-Id: I494f7beb572e81cf68cc1cf90864eea0d8125369
CRs-Fixed: 3237943
Add change to support addition of AST entries on host
for BE platforms(Waikiki) based on peer map and unmap event received
from FW.
Change-Id: Ib9a76fd15d18e322b561ce9361d62643289817c4
CRs-Fixed: 3237940
Event based mechanism to reduce delay by removing sleep
while getting response from firmware
Change-Id: I9d553764127efaf06794f41c81cf646cf9dc695e
CRs-Fixed: 3233643
Add check to validate vendor IE length in util validate
reporting STA IE API to avoid OOB read.
Change-Id: I1cdd8eced7b5ffcecde6f0337eb45fc90077932f
CRs-Fixed: 3236561
Currently, in few instances the MLO peer APIs are called
with invalid ML peer pointer.
This change prevents NULL pointer access and clears MLO
flag for peer.
Change-Id: I8bcdae1d71655f7ed267cc5bc3f6d0fc51e930df
CRs-Fixed: 3245158
Duplicate X times of RX packet before delivering to stack, if OTA
RX T-put is 100 Mbps and try to simulate 200 Mbps RX T-put,
duplicate extra 1 time RX packets, this is aimed to test
driver/stack RX capability.
Change-Id: Iaf4db05d0ec0e0cda5fac19fa63b9d3133270847
CRs-Fixed: 3132743
Only one rx desc pool is used for MCL for Rx data. Pool_id from
the SW cookie is used to get the rx desc from the corresponding
rx desc pool. Checking pool_id against MAX_RXDESC_POOLS may lead
to kernel NULL pointer dereference Since, pool_id other than 0
is not valid for MCL.
Fix this issue by checking pool_id against MAX_PDEV_CNT
to get the rx desc from rx desc pool.
Change-Id: Ib9b152ac2cfe2c16d388aca9e22440fbcdf7fe6c
CRs-Fixed: 3244453
Shorten the strings in error prints in the helper that carries out
802.11 element/subelement defragmentation. This is in order to
decrease the size of the modules generated as required for some
platforms.
Change-Id: Idd37ea59467aa5ebc3928f336f05b603e5d7f6f5
CRs-Fixed: 3248821
Shorten the strings in error prints in the helper that determines
802.11 element/subelement fragment sequence information. This is in
order to decrease the size of the modules generated as required for
some platforms.
Change-Id: I5a15dc12404399c4670e0cb29205a728715f4923
CRs-Fixed: 3248813
Shorten the strings in error prints in the helper that determines
802.11 element/subelement successor fragments. This is in order to
decrease the size of the modules generated as required for some
platforms.
Change-Id: I4457e1228f848a52f9eea056541806220ff4e8da
CRs-Fixed: 3248806
Extract EML and MLD Capabilities from Target via
wmi_service_ready_ext2_event. These values can be
used while advertising EML and MLD Capabilities.
Add helper function to get EML related delays in
Micro Secs from values got from EML and MLD advertisments.
Send EML Capabilities received from node to Target
via WMI_PEER_ASSOC.
CRs-Fixed: 3225495
Change-Id: Ibfa2ff8dbf11d4293125331376a7986e611d5f63
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the target SW to
indicate the different capabilities of the Spectral HW.
Add support to process this event and extract the capabilities.
Change-Id: I03b3236b6def98d24e77b2a9ea51ee866e62e6fe
CRs-Fixed: 3238450
Add QCA_ATTR_ROAM_CONTROL_RX_LINKSPEED_THRESHOLD value as the RX link
speed threshold to disable roaming. If the current link speed is above
the threshold, there is no need to roam.
Change-Id: Ifeeacfa9d49de76c28fe968c1eb26b5036261c9a
CRs-Fixed: 3200264
Add vendor command QCA_NL80211_VENDOR_SUBCMD_COAP_OFFLOAD to
enable/disable offload processing in firmware for CoAP messages
(RFC7252: The Constrained Application Protocol) or fetch the
CoAP messages cached during offload processing.
Change-Id: I2eaeba58ec6bc44738f68eb00c36ebdce2eae6f8
CRs-Fixed: 3193633
UMAC reset prerequisite setup command contains the following information.
- Interrupt number to be used for raising the UMAC reset interrupt
- Address of the shared memory
This is an HTT command. Send this command as part of the UMAC reset
initialization sequence.
Change-Id: I7a08f48b420580b5e3dbb9b46f6605d986f8fd89
CRs-Fixed: 3244930
UMAC HW reset is expected to send the following Tx commands to the target.
- PRE_RESET_DONE
- POST_RESET_START_DONE
- POST_RESET_COMPLETE_DONE
Add the necessary logic for the same.
Change-Id: I2450ed9281691abcc064661d4481ae78f48a0f3d
CRs-Fixed: 3244895
UMAC HW reset is expected to receive the following 3 events from FW.
- DO_PRE_RESET
- DO_POST_RESET_START
- DO_POST_RESET_COMPLETE
Add necessary logic to handle these events.
Change-Id: I786ecf6ed2925fd7fcc0934fdce65c76784f4f67
CRs-Fixed: 3244865
In IPA offload, both tagged and untagged traffic cannot be handled with
a single rx pipe. Hence, add support for 2nd RX pipe for tagged and
untagged traffic respectively.
Change-Id: I77ff633327696f66df42fb592492321c1591646b
CRs-Fixed: 3226021
Issue: mode was set to HT20 and marksubchannel was enabled. We injected
radar into the HT20 primary channel. The primary channel is not being added
to NOL when marksubchannel is enabled because the current subchannel
frequency list(freq_offset->freq[i]) is not being filled.
To fix this, Even if it is an HT20 mode, fill the subchannel frequency
list(freq_offset->freq[i]) based on offset.
Change-Id: I571ba60c755e7701a21db89f917c953ffa9716a6
CRs-Fixed: 3244971
Add support to log latest CE descriptor history which helps
to identify CE scheduling/reaping delays when full debug
history dump is not available.
Change-Id: I44a5c86a3e1dd4861bfd2e77b3f772d5d53bcedf
CRs-Fixed: 3225155
Currently in monitor mode for KIWI, interrupt for RXDMA2HOST is
enabled to process both monitor status srng and montior destination
srng, but low threshold interrupt for monitor status srng is also
enabled. so when available RX buffer in monitor status srng is less
then low threshold, it is possible that two kind of interrupt from
RXDMA2HOST ring and monitor status ring will call
dp_rx_mon_status_process_tlv() in different context and access to
mon_pdev->rx_status_q at the same time, this will lead to skb
double free issue.
solution:
(1) disable RXDMA2HOST srng interrupt in monitor mode.
(2) enable monitor status srng batch count interrupt for monitor
processing.
Change-Id: I1df8830cb7cc55468e5df5e49045c3d96f7c29a8
CRs-Fixed: 3245393
In case if cm ctx is NULL, the disconnect state check API is returning
false which makes the caller assume vdev is not disconnected.
Hence, change the return value to true in this case.
Change-Id: Iadd52d94d6f561974101aa245ddbfdb1eb301b06
CRs-Fixed: 3246161
Add change to support learning of AST entries on host
for BE platforms(Waikiki) based on peer map and unmap event received
from FW.
Change-Id: I58aa6a18ca69d5ffc6fbcf9c18723adb39647950
CRs-Fixed: 3237934
From firmware perspective, host only sets 5 GHz regdomain hence 2 GHz
uses default setting and firmware does not update channel list event
for all phys according to the new country code.
Therefore sets pdev_id to 0xFF in function reg_set_country and it is
mapping to WMI_PDEV_ID_SOC when issue wmi command
WMI_SET_CURRENT_COUNTRY_CMDID as firmware required.
Change-Id: I0eb84db9f6d77c0473161cc4ffc0dcebd31c3d45
CRs-Fixed: 3239644
As part of IPA offload support for WCN7850 chipset, properly define
TX ring indexes into soc->tcl_data_ring[] and soc->tx_comp_ring[]
used by IPA.
In the change, use wlan_cfg_get_rbm_id_for_index() to get correct
rbm values for WBM2SW ring used by IPA.
Change-Id: Ie5b6743c1cb2adfa156735fc84dc1429a67f833a
CRs-Fixed: 3246038
