SMECNS_V2 module in COPreP topology doesn't support
stereo input. Update channel number to mono for
VPM_TX_VOICE_SMECNS_V2_COPP_TOPOLOGY, which contains
SMECNS_V2 module.
Change-Id: I04b971b41328f6a32bf0ff42b21496b49bb4140b
Signed-off-by: Kunlei Zhang <kunleiz@codeaurora.org>
During clock stop, Register for lpass wakeup only after
disabling the clock to avoid flooding of interrupts when
master is turned on for pending slave irq.
Change-Id: Ifbf604048d4972beb22b6286930193b83a2249e8
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
synchronize swr clock request using mutex and ensure
count becomes zero during ssr.
Change-Id: I3aa933a137d9439742d84fc23b37653da86f3b42
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Check if snd event client array is null before
dereferencing.
CRs-Fixed: 2328286
Change-Id: I4f7c2a1288ee27df51609e090cb2da2d33624a07
Signed-off-by: Tanya Dixit <tdixit@codeaurora.org>
Micb lock which is used to synchronize micbias
control api is not initialized causing spin lock
errors. Initialize the mutex to avoid the issue.
Change-Id: I580e52e1bd225c2d99bfba4657d80670296709a0
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
There seems to be a delay in processing WDSP open commands
on APPS side. Sometimes it is taking more than 1 second,
results error in wdsp channels initialization. Increase the
timeout value to avoid channel connect failures.
Change-Id: If46251f07763080729858dc612679ee10149f57b
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
Add TDM clock reference count as LPASS
CLK API should only be controlled once
per TDM interface.
Change-Id: I025dc7cce3f1ccfe3b9d0ed652b71773f90d5c6f
Signed-off-by: Derek Chen <chenche@codeaurora.org>
If buf unmap is executed without successful kernel unmap
the vmap counter mismatches. Check for error scenarios in
kernel unmap function and ignore buf unmap if not necessary.
Change-Id: I3c5835dcdfe05db4baaa5cf904995ed8f89e9cfe
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Check the validity of copp index before calling
adm_close. This avoids redundant error logs in
adm_close.
CRs-Fixed: 2330388
Change-Id: I0b1cef5a45298fe9cbc84d9b944f6f10cec562df
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Send sample rate for port media type from APTX AD
config before AFE port start.
Change-Id: I3410428661ad4162539f437bb391c33a60ea1852
Signed-off-by: Aniket Kumar Lata <alata@codeaurora.org>
USBC gnd mic swap is taken care of by FSA4480.
Gpio does not need to be swapped for this purpose.
CRs-Fixed: 2323772
Change-Id: Ida490995761ec5361ff2302b990d3c6fe1f32f85
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add hostless FE and TDM BE DAI links for
TERT TDM TX7 and SEC TDM RX7 ports.
Change-Id: I57fed1162c5dc175475e7990f57d4a010a9057f2
Signed-off-by: Derek Chen <chenche@codeaurora.org>
Sometimes observed that session is taken more time to teardown
after ssr. Increase timeout to allow more time for session
to be tear down.
Change-Id: I3f1b4d8f583ad5b9c8f5e1b90af9c576ae6bd2b2
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Correcting payload length for adm_cmd_device_open_v8
usage if endpoint_id1 and endpoint_id2 are valid
and this_adm.num_ec_ref_rx_chans is 0.
Change-Id: I82815a2d885cdad5a9427c11eb73224289b158b3
Signed-off-by: Dieter Luecking <dieterl@codeaurora.org>
Add configuration flag to make use of 32channel support from
QDSP6.
Change-Id: I1e491b1ec870234140e914add4f177e5351b9953
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
User space sensor daemon requires to restart the audio dsp
during some of the sensors usecases. Add sysfs interface to
do adsp subsystem restart from user space sensor daemon.
Change-Id: I07c78892cb6e6f99ae93c04eddbc321681b52a70
Signed-off-by: Shaikh Shadul <sshadu@codeaurora.org>
Send VAD configuration during TDM port start.
Change-Id: I30b45b066b2ca5fdf49cd74d87d95f75566661c9
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Currently, the fs_cntr for MAD is enabled whenever the MAD
audio path is enabled. But, a new issue is reported where
MAD fs_cntr is required even for some of the non-MAD paths.
As per hardware requirements, enable the MAD fs_cntr always
from the codec default registers.
Change-Id: I6fe8f663b82e711b4194aa51a3e21150aa98cf02
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
