For higher refresh, to provide higher transfer time we need to disable
RSC solver in MDP. This can be configured through the panel timing node
devicetree property. This change adds the parsing of the devicetree
property.
Change-Id: I9e708325da35086d2f955cbcc80bb164ccb116cd
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
In dumping display registers, physical address will be appended after
each block name. This is to support register compare between kernel
and UEFI.
Change-Id: Ic20d3e2bd4c95aa7c71c4b646a149f7e83ad731a
Signed-off-by: Yu Wu <zwy@codeaurora.org>
Add support to send a data packet of info, written to
predefined buffers, providing information about each submitted frame.
Add required UAPI definitions for frame data buffers and event
notification.
Add support to read ubwc statistics from hw, based on defined rois.
Change-Id: I51f279de98ae4e2a02b0df6943d334764011d5db
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Some panels require a fixed step rate for a particular mode.
This change allows DSI panels to specify a single supported
step rate for each nominal fps rate which SDE will enforce
during atomic check of AVR parameters.
Change-Id: I049415449bc88ccd396fced16d4534251eac3a06
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Add AVR step support so SW can trigger a late frame and instead
of immediately triggering, HW will perform the update at the
start of the next step interval. This allows for a fixed SW
vsync timeline to be maintained in userland, eliminating the
usual drift from the actual HW vsync caused by a late frame.
This change adds AVR_STEP support via a DRM property.
Change-Id: I4cf8a296989805f134c2165a3bed0b050bb09c96
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Now that we don't need struct_mutex in the free path, we can get rid of
the asynchronous free all together.
Change-Id: I82406450e3a5d0d49d3fb753c621f55e8f4af088
Signed-off-by: Rob Clark <robdclark@chromium.org>
Git-commit: c951a9b284b907604759628d273901064c60d09f
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Rather than relying on the big dev->struct_mutex hammer, introduce a
more specific lock for protecting the bo lists.
Change-Id: I4c876a1c3ae51ff62372703a99a8daff0c4a7950
Signed-off-by: Rob Clark <robdclark@chromium.org>
Git-commit: d984457b31c4c53d2af374d5e78b3eb64debd483
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[samtran@codeaurora.org: avoid changes related to debugfs and shrinker]
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
We use a llist and a worker to delay the object cleanup. This avoids
taking mmap_sem and struct mutex in the wrong order when calling
drm_gem_object_put-unlocked() from drm_gem_mmap().
Fixes lockdep problem with copy_from_user() in msm_ioctl_gem_submit().
Change-Id: Idfe54ae8108158b69f3835f26991642d1e21f8ee
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Git-commit: 48e7f18392c66f9b69ebac11c54f1a2e033ced54
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[samtran@codeaurora.org: resolve trivial merge conflict]
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Add cwb dither support.
Catalog: Read dtsi value of cwb dither in pp parse part.
Wb: Install blob property for cwb dither.
Wb hw: Adds a new wb ops function to program cwb dither hardware.
CRTC: To ensure that userspace can check whether cwb dither is supported,
added "has_cwb_dither" to sde kms info.
PingPong: In order to reuse dither's map array, move dither_depth_map array
to pp header file.
Change-Id: I77e6a052a00b7c649452103145e5d7b4c8deb3a2
Signed-off-by: Yuchao Ma <yuchaom@codeaurora.org>
Currently, RFI feature only supports panel that contains
a single timing node. This limits the feature availability
for panel with multiple modes or with DFPS support.
This change adds support for RFI on panels that contains
multiple timing nodes.
Change-Id: I3a7aadf7b6da3518350b2eb815602b13b5c259f5
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Add a new connector range property and a new entry to the panel
capability blob to publish the list of supported RFI frequencies.
In addition, add the required functions to set, validate and update
DSI bit clock rate value to trigger an internal seamless mode switch
and reconfigure DSI clock and PLL.
Change-Id: I7d19cc369f8c5528709f2f20a51ef02180ebdea4
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Fix dlkm compilation errors that are due to the use of -Werror
flags used by the build system.
Change-Id: I5e1e9bc63c1361d73e4930aab123212717872ecb
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Add changes to install retire fence offset property
and this configurable offset property can be used
to create speculative retire fences.
Change-Id: I0b5bf9bab5bfb811ddbc7a3e8813a3e801272d41
Signed-off-by: Jayaprakash Madisetty <jmadiset@codeaurora.org>
DPU has added support for noise injection into the layer stack. Change
adds support for noise layer programming and exposes the hardware block
to the user space modules.
Change-Id: Id176eea54fcdcd5d399457b14133a1ccde07299f
Introduce support for the FP16 format and FP16 color processing
blocks. This includes support for FP16, FP16 UBWC, and inline
rotation on tiled FP16 pixel data.
Change-Id: I06a70cab5447140598682f687129d4f8662524b2
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Expose panel mode from kernel to SDM with SDE connector property
CONNECTOR_PROP_MODE_INFO and set panel mode from SDM to kernel
with SDE connector property CONNECTOR_PROP_SET_PANEL_MODE for
avoiding private change in upstream code in QGKI kernel.
Change-Id: I0629dad9399967cc1118ac02ce30597076ca367d
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
Move away from the private and private_flags fields from drm_mode,
as it is being deprecated in latest kernel version. Instead, Add
msm_display_mode as a wrapper to be used in downstream to store these
parameters. Also, store msm_mode in connector_state to be accessed
in commit path.
Change-Id: Ia5bdebe75f00aa15fb7db4dc3a0d50c30894a95c
Signed-off-by: Orion Brody <obrody@codeaurora.org>
Commit a25b988ff83f ("drm/bridge: Extend bridge API to
disable connector creation") and commit ee68c743f8d0 ("drm: Stop
including drm_bridge.h from drm_crtc.h) add additional input flags.
This change adds fixes to the drm bridge attach API and includes
relevant drm_bridge header files.
Change-Id: I85e84eaff7df2995243896108a217fae81716b63
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
This change fixes the detection logic for overriding the ich
reset in both single and dual dsc case. In the previous logic
ich reset override was not getting triggered when partial update
on single dsc was enabled. This override is required to change the
default Hw behavior of changing the ich reset position.
ICH reset needs to be overridden in dual dsc merge case when
partial update disables the dsc merge and no. of slices per
encoder drops to 1. Similarly for single dsc case partial update
case when DSC encoder configuration changes from 2 slices to
single slice this override is required.
Change-Id: I435dc7ff10c9fb0edb8e40e6701608aa22136981
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
In current implementation qsync min fps is single value.
It is same for all the list of supported dfps list.
Added support for new dt entry dsi-supported-qsync-min-fps-list
corresponding to the fps supported in the dfps list
dsi-supported-dfps-list.
Change-Id: Ifd5309c2f51865a3c0d9fadb65cbcd291b6ef42b
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
Due to power-domain, if rotator driver is registered early,
probe might get deferred several times and get stuck
indefinitely. So, this change adds driver registration
after genpd init to handle such cases.
Change-Id: I8dcb640d0ab0cdf0818cbce1b1fb460c28d8b9e7
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
It is not applicable for all DFPS cases to update UIDLE state
according to current frame rate. If DFPS changes frame rate
through vertical front porch values, the SDE clocks and transfer
time will not get changed accordingly, and it always get fixed
at max frame rate configuration of DFPS.
Add this change to check max FPS of DFPS instead of current
frame rate for UIDLE update, if DFPS is enabled with VFP.
Change-Id: I7634bce6a9eb1af212ba19a267735be08b20ae1f
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
The change adds a new mode property allowed_mode_switch. The new
property is a 32bit bitmask that indicates the modes each mode
can switch to. This change is required to pass the driver mode
switching capabilities, so that user mode can reject any mode switch
that is not supported by the driver.
Change-Id: I76d1733a07a6d57487ba9f461055270d7e60e060
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
All sde crtc's are virtual when they are created. Resources for the crtc
is allocated when crtc is enabled. All crtc's will not have same
capabilities because some of the dspp blocks have additional hardware
blocks. Change exposes additional dspp capabilities dynamically when
crtc is allocated the dspp hardware block.
Change-Id: I93e76a1335574e4ca30d9419ef6cc6e8149e2c3c
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
This change add right only pu support by allowing the dsc to be
flushed when one of the dsc is getting disabled. Since the crtc
swaps the mixers in case of right only partial update, this change
fixes the active display mask passed to encoder so that always the
left only dsc gets programmed. This change also fixes layer mixer
configuration where only one layer mixer is driving the partial
update, the other mixer's configuration is disabled.
Change-Id: I2dd2e9a347797bfe07c90e0ca7f999d151fba933
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Besides SDE, other subdrivers may be interested in participating in
the VM switch. This change provides framework for display dependent
drivers like DSI, DP and RSCC to register for various VM switch
event hooks.
The following hooks to provided through msm_vm_ops:
post_hw_acquire: invoked before the first frame push after gaining
HW access.
pre_hw_release: invoked after the last frame commit before releasing
the HW.
check: check with vm clients for their readiness for HW
releasing.
Change-Id: I616db04e979f78f76f6f97ee3b068dd348339ab6
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
This change removes the fb_kmap debugfs node along with kernel
mapping of writeback framebuffer. It also replaces dma_buf_kmap
calls with dma_buf_vmap.
Change-Id: I2fbee7fa5922071f6805d8e6df540ce87056bc0b
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Add a CRTC property to request the VM to acquire/release
HW resources.
Display driver in trusted VM boots up without HW ownership. Set
the default value of the property as RELEASED to handle resource
assignments.
Change-Id: Iea651a2fea902d95d4b954052af4ef016af15a91
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Currently DP driver determines if a mode is DSC capable
based on a DTSI entry and the required number of DSC
to support it. This approach does not scale when there
is an overlap in DSC requirement between DSI displays
and external DP display, thus causing one of the display to
report modes that cannot be supported.
This change compares the resources reserved for DP driver
calculated at initialization time and the currently available
ones to determine the correct number of resources that DP driver
can use. It also adds DSC and topology filtering logic and moves
DSC hardware specific from DP driver to SDE driver.
Change-Id: I8e601de33422b7c6d786826f7bfe152c4af8a6b5
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Primary and secondary dsi displays are built-in displays
and they are supported during all concurrency usecases
without resource allocation failure. DP mode filter
logic should provide supported mode information based
on free mdp resources after dsi resource assignment.
Change-Id: I3a9637a91ea1ffcc31997e25caff7f13605283ac
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Add support for all 4LM topologies in new DCE encoder framework.
This change also aligns with the new way of checking topology
information.
Change-Id: I5358d60634070bdb26059056db884ad4161c073e
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Add support for all 4LM topologies in new DCE encoder framework.
This change also aligns with the new way of checking topology
information.
Change-Id: I20785c96569fd07cbd8016d244a7e4c929bfa071
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
This change updates resource topology mapping tables and includes
logic to compare compression types for dsc vs vdc.
Change-Id: I1735edeb07aec8ed0065f84ac0824c58158412f3
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Make msm_drm into single module and all child driver
registers and unregisters are handled from parent's
register and unregister respectively.
Change-Id: I017513d1de3b6b25dd5543d7fa7741c0bac1740d
Signed-off-by: Shashank Babu Chinta Venkata <sbchin@codeaurora.org>
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Store full or partial static image in system cache (L3 cache)
for video mode primary display. Added additional commit to
crtc commit thread to transition to read cache state.
The change also updates llcc APIs to support generic functionality.
Change-Id: I6b2a45da946d7e0e0b326da9d214be3f01a9420e
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
From Lahaina onwards, for compressed DSI output, widebus should be enabled.
In widebus mode, 6 bytes of data are transmitted per pclk.
For uncompressed output, widebus must be disabled to transmit 3 bytes
of uncompressed data per pclk.
Change-Id: I7fc0bdb2e1678152d57b4cbb8295063a2ba8ae73
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
If DPU hardware supports demura feature, install the connector
properties related to demura feature.
Change-Id: Ieaddfc695e9f57e3c45e2bc0bd2c2e103f895ba8
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
There is potential byte alignment problem on 32bits OS which will
cause incorrect histogram blob id getting from the user space.
This change fixes byte alignment problem on 32bits OS by keeping
the struct members in one complete struct as the user space using.
In previous code start address of 'info' would align to multiple of 8,
so there would be 4 bytes padding between member 'event' and 'info'
on 32 bits OS. It is affected by member 'base'. But user space just
uses struct drm_msm_event_resp only, not affected by member 'base'.
Driver code intends to send drm_msm_event_resp, but actually send
unpacked members.
Change-Id: I5410f5b1626387707a57cbcef9c651aa11914d9d
Signed-off-by: Renchao Liu <rencliu@codeaurora.org>
This change parses SPR enable entry from panel device tree and
populates SPR specific information in panel data structure.
Valid entry of SPR pack type is treated as panel requirement
to enable SPR for specified pack type from source end. This change
also populate connector capabilities blob with SPR pack type.
Change-Id: I9d9ab8a990476fba281e12890bf3f7b17a174d79
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
