Updated WCD937x, WSA881x-analog and bolero drivers for successful
compilation on kernel6.0 for holi.
Change-Id: Ia91a999f825570b3d7123842f0aad3740c4d25ed
Enable Audio HM vote for VA I2S and TDM interface so that
clock is sourced from CXO instead of RO.
Change-Id: I4f74f46a4ae7977e9cd15a2d8f59f020e02ac8a1
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Enable Bazel for building audio-kernel modules.
Change-Id: I3b6a4e2d4034f1f39699b8a6dc21087c87fbe09d
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Codec dai name for btfm proxy is changed to not use
slim keyword. Update dai name as updated in codec driver.
Change-Id: I1c8a815959a448f476aefa3b892311c279db00cd
Signed-off-by: Rohit kumar <quic_rohkumar@quicinc.com>
In PDR cases INTR_CLEAR registers values are not updating
properly while doing reg_cache in recover from PDR. So add
these registers as volatile to get the exact HW values.
When these registe values are properly updated the FSM_PA
status is reseting properly and working.
Change-Id: I8fa7b01b3256ec8f01edc3fe48a519accfff9638
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
In SSR/PDR usb switch settings won't be reset in wcd939x-i2c
driver. So no need to do switch settings for AATC when recovering
from SSR/PDR. Depends on the status to avoid AATC switch settings
again after SSR/PDR.
Change-Id: If7fc2a84356a406e9cf7e6cc557e19584fda3969
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Add static variable to store version to avoid improper
device pointer in wcd939x_readable_register().
Update WCD939X_NUM_REGISTERS macro to be correct size.
Change-Id: Ib594f2f799ac2202ff78c02ccf2f6cdb80ffd38e
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
Few register default values are incorrectly set for harmonium
codec in the register map table. Fix it by setting correct
values as per the hardware interface documentation.
Change-Id: Ibcb517d6050a4932243ead396e6f89294aab4a23
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
During spk playback and VA concurrency,
sometimes WSA CLK goes out of sync causing
VI_TX data mute. To resolve this, everytime
after WSA MCLK enable toggle fs_cnt_clr bit.
Change-Id: Ia936f1d4843890d2ae5c02b039f502941a5427b9
Signed-off-by: Soumya Managoli <quic_c_smanag@quicinc.com>
Check and update register sequences for wcd9395 version
2.0.
Change-Id: I85fc739744ee2ba2c5dbdc853eb639b84cac6478
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
enable l_det_en bit while detecting the HS.
Issue: While removing HS some additional electrical interrupts
are triggered and reporting different events to userspace, which is
cause issues. To avoid this electrical interrupt flow, there is
a check in adc_hs_rem_irq for wcd_swch_level_remove() to check
for l_det_en bit status. Depends on this it will return from the
adc_hs_rem_irq() without going further.
Solution: Enabling the l_det_en bit will helps to avoid serving
electrical interrupt flow to further in adc_hs_rem_irq().So this
will helps to stop reporting different/unwanted events to user space.
Change-Id: I29d72b65ebb59969b69f3f8c7f4c7eb2debb0f1c
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
dma_vmap is not freed in else case of is_iova, so kfree dma_vmap
when is_iova is false. And also if dma_buf_vmap kernel map is
failed, need to end cpu access dma buf.
Change-Id: I111fb7a2a367a8418f46a7b5fc1459d135d7115e
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
During some concurrencies even though we are not
enabling the swrm port, we are trying to disable it.
which causes problem w.r.t clock disablement,
To avoid that we are updating the set bit only
when port is enabled, based on that bit we are taking
decision to disable or enable the port.
Change-Id: I6707c56c40dd3716917edc097c4b7bcad68261fd
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
During swr disconnect port, swr master num port is
updated based on the portinfo we receive from slave.
Instead update the master num port based on the ports
enabled. and also if requested port is not enabled
continue to check for other enable port instead of
returning error.
Change-Id: Ia8a6e4935df443f9833e01d56195b590afe3bb4a
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
Add scale and alpha register value updates based
on computed digital xtalk cancellation gain.
Change-Id: I8c12e2ba7c1566476741fec5459a74549f19cf5f
Signed-off-by: Sam Rainey <quic_rainey@quicinc.com>
Update wcd939x-usbss mode on PA enable and disable.
Change-Id: I73a19ea73102ced5c8011a5a1567ebfa372b2e44
Signed-off-by: Eric Rosas <quic_erosas@quicinc.com>
