Change set 2 of ctrl_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I3f180c9c360d564f0b229b447074ad23b7c0a737
1. Move all LMAC rings to SOC from pDEV
2. Dynamically obtain lmac->pdev mapping while handling LMAC interrupts
Change-Id: Ib017d49243405b62fc34099c01a2b898b25341d0
Check for vdev_id mismatch to deliver NBUFs to stack to avoid
hold peer reference while giving nbuf list to stack
Change-Id: Ic475e00d5b1793ada7b26b7af3322ca2fa51836f
Link descriptor were getting freed by the pointer
of the previous freed link descriptor. This patch
fixes by copying the address of the current in a
local descriptor info and using it to free the
current.
Change-Id: I95e137ba5b1f0ad21b0e6fb39f6671e1d5b65ba6
CRs-Fixed: 2577624
Currently defragmented packets use HAL_RX_BUF_RBM_SW1_RBM as the RBM
value for the defragmented packets which are re-injected into REO.
Thus, if REO encounters any error while handling these packets, they
would end up in WBM2SW1 ring (via WBM), which is managed by the FW. The
FW will eventually recycle these buffers back to RXDMA via its refill
process. As a part of defragmentation, host does a 802.11 -> 802.3
header conversion. This is resulting in an address which is not 4
byte aligned. Hence, when RXDMA tries to use these addresses (after FW
recycles them), it may lead to issues.
Change the RBM value of the defragmented buffers which are
re-injected. Now, if REO ends up throwing an error for these
packets, they wll end up in WBM2SW3, which is managed by the host.
The host can then drop these packets and replenish RXDMA with 4 byte
aligned buffers (via FW).
Change-Id: I9d9c25385978d5be855699feb28d292c6f3fffdd
CRs-Fixed: 2572483
When a particular vdev is deleted, the corresponding rx
packets which have been queued to the rx thread are not
flushed. Hence when such packets are submitted to the
network stack, the dev for this skb will be invalid,
since we have already freed the adapter.
Flush out the packets in the rx thread queues, before
deleting the vdev.
CRs-Fixed: 2543392
Change-Id: I2490d0f5ce965f62152613a17a59232521ca058f
rxhost ring backpressure:
identifying rings causing rx backpressure after being notified
by FW message. Adding logs to be able to see at what state
the ap was after a backpressure event was triggered.
Adding radio stats (261) as well as napi stats for better
state description.
Change-Id: I395450be6faaf959f91729516a7b229c5b3396ce
Add device ID change and target type checks for pine.
Also remove memory war added for Hk emulation.
Change-Id: Idf531a48a03202d4fb241a92a1d671ee2b94cfbd
CRs-fixed: 2453899
Tags are programmed using wlanconfig commands. Rx IPv4/v6
TCP/UDP packets matching a 5-tuple are tagged using HawkeyeV2 hardware.
Tags are populated in the skb->cb in the REO/exception/monitor data
path and sent to upper stack
CRs-Fixed: 2502311
Change-Id: I7c999e75fab43b6ecb6f9d9fd4b0351f0b9cfda8
1. Remove vlan tag in tx and enqueue to hardware.
2. Add vlan tag in rx after peer-vlan_id lookup.
Change-Id: I932202540ac03cabdd20ffd4849fe759ea8a7abb
Add code to replace usage of void pointers from
HAL layer and instead use appropriate opaque pointers
Change-Id: Id950bd9130a99014305738937aed736cf0144aca
CRs-Fixed: 2487250
Add code to remove void pointer usage for hal_srng
and use opaque pointer dp_hal_ring_t instead.
Change-Id: I6907f7376d7fe3c9180b8795bd96f49fead2ec64
CRs-Fixed: 2484404
Make change to remove usage of void pointers for
ring descriptors and instead use a opaque pointer
dp_ring_desc_t.
Change-Id: Ia1e9a3da9eaa3cccf297b2135b52a72f2fe21431
CRs-Fixed: 2484409
Monitor buffer are required only when monitor VAP is created. Allocate
these buffers only when montior VAP is created. This provides memory
savings when no monitor VAP is created/required.
Change-Id: I3ddaef00615f00fd13adb2789469a62f1a0af165
CRs-Fixed: 2491873
Reducing the log level of debug log to avoid console logging
and instead get it on the cnss diag log.
Change-Id: Ie5a1eb6f45ffa97790d91528a173b16319ec760b
CRs-Fixed: 2486057
Check if host is reaping a descriptor which is
already reaped then drop RX desc processing instead of asserting.
Macro DUP_RX_DESC_WAR added before dp_rx_dump_info_and_assert function
which does not assert for the case WAR is enabled.
Change-Id: I4f3c1cc16de79f2483cd415582970e093e81d465
CRs-Fixed: 2486057
Add support to log the important events in
datapath, which will help in debugging the
datapath issues.
IRQ handler, Napi poll and srng access start/end
are the events which are currently logged.
CRs-Fixed: 2457854
Change-Id: Iba105b0e79443b670a01a929f999f94e00ea92f2
If any non authed clients send data packets then
AP should send Deauth Frames to STA. In Current code
we are finding VAP from pdev. And if MAC address are
same for VAPs on both radios then pdev will be wrong.
Because of that VDEV id was coming for non active VAP
and deauth frames were not going out of AP.
Change-Id: Ia28ea4143cec9c876313211962ab98b0e4028ee8
Move WDS feature specific APIs out of common code
as these features are WIN specific. Keep the usage inside
common code under feature specific flags.
Change-Id: Id907a5e22c27fc47e8314449e154525684a27e85
Allocate memory in multiple smaller chunks for dp_rx_desc_pool_alloc,
and link the pages instead of allocating one big contiguous memory to
avoid memory allocation failures.
Change-Id: Id81de10727555c4ca78963a6f01ed3b992ce9924
CRs-Fixed: 2443999
basically tried reading peer_id from peer structure
to avoid 1 cache-line miss per pkt and access mac address
from frame data for WDS only if WDS condition is valid.
The other optimization is to avoid accessing queue_mapping
field of skb for skb received which is at 140 offset
This again helps to avoid i cache miss.
Another place is to do a memcpy only when we intend to
add an ast entry.
Change-Id: I7e328060c505bc21419d045e77329c2cda9e3644
CRs-fixed: 2388857
In Rx path, We really don't need to flush data and invalidate.
Hence replacing map/unmap flag to QDF_DMA_FROM_DEVICE.
Change-Id: I3de0c73e11a08a875114167a55fe9fe4432f1dd4
CRs-fixed: 2449712
certain fields are now retrieved from reo_destination
ring to nbuf cb. This avoids accessing the RX_TLVs
which are spread across two cache lines. This is
helping improve small pkt (64 byte) performance.
Change-Id: Iee95813356c3dd90ab2e8a2756913def89710fb1
CRs-Fixed: 2426703
CCE stats are reported across rings today. Since HKv2 is a SMP, it
creates the possibility of missing stats when two or more CPUs are
updating the counters for the same protocol type. In order to avoid
this, we can either use locks or store stats on a per-CPU basis.
Since tagging happens on the core data path, locks are not preferred.
Instead, we use a per-ring counter, since each CPU operates on a REO
ring. Exception packets today go to Ring-0 (also normal rx Reo-0
go to Ring-0). Hence tags are maintained separately for exception
ring as well.
Change-Id: Ib01934619fb026bf64a8ac998eaec2d4df7f5a6e
CRs-Fixed: 2438143
Currently frames will be dropped if it arrives before
peer is registered with data path module by control path.
So cache rx frames and flush them to the upper layer when
peer is registered at data path.
Change-Id: I086122fffdcf33e25ba57774ef944550cdd2fa20
CRs-Fixed: 2329308
With this feature, using appropriate commands, link layer, network layer,
transport layer and some of the application protocols can be tagged with
the user provided tag values for easier identification of protocols. The
supported protocols today are as follows.
ARP, DHCPv4, DHCPv6, DNS over TCP (v4), DNS over TCP (v6), DNS over UDP
(v4), DNS over UDP (v6), ICMPv4, ICMPv6, TCPv4, TCPv6, UDPv4,
UDPv6, IPv4, IPv6, EAP.
Receive packets are tagged by hardware. Tags are applied after the first
matching rule. Hence it is recommended that the rules are
programmed in such a way that tags are configured from application layer
to data link layer to get expected results.
Change-Id: Ibdc2bd2b78234f482074955e89fb93f05988eaca
RX_BUFFER_SIZE macro got introduced by mistake during rebase. The macro
is present in hal_rx.h. Removing the extra macro.
CRs-Fixed: 2382076
Change-Id: Ia66079d6d4543b4e3fd99e9f0c0376353a92aa9c
Vlan tagged STP pkts are received in host from
wbm exception path with wifi parse error code.
This is delivered to stack. Stats added for wifi
parse error and vlan tagged stp pkt count.
Change-Id: I25af5ab403ee7a46b4abe2f60328314d61587b80
CRs-fixed: 2375575
This rx_desc flag was removed from the function by a previous change
with id Iaa345d04b8d48814f88ed6e2237fc67696f6a20c. This flag is
needed to keep track of whether the nbuf associated with a rx_desc has
been unmapped or not. Set it to 0 when a mapped nbuf is associated with
the rx_desc.
Change-Id: I24e103c5698a556f478a3f7917076d31b5490661
CRs-Fixed: 2393056
- Check for rx_desc.magic before using a rx_desc retrieved from the reo
destination ring via rx_buf_cookie (dp_rx_process). Add stats.
- Check if we end up re-using a rx_desc with rx_desc.in_use=1 in the
replenish path (dp_rx_buffers_replenish).
- Drop RX packet and assert in case MSDU Done failures are seen in
in the TLV during dp_rx_process. Add stats.
- Disable host2rxdma ring mask for MCL. MCL is not expected to be
receiving these interrupts.
Change-Id: Iaa345d04b8d48814f88ed6e2237fc67696f6a20c
CRs-Fixed: 2382076
Per the Linux Kernel coding style, as enforced by the kernel
checkpatch script, pointers should not be explicitly compared to
NULL. Therefore within dp replace any such comparisons with logical
operations performed on the pointer itself.
Change-Id: I61f3adab1208682d36235421f44a048e35df346d
CRs-Fixed: 2418258
Rx desc pools are reused across wifi up
and wifi down, only nbufs part of these
pools are free during down
Free Rx desc pools during WiFi Unload
CRs-Fixed: 2418941
Change-Id: I5cc3a82d99efd84f51f9eb048cf06da5a4495e55
Delay counters per TID have been implemented for following types:
1. Linux stack to hw enqueue delay
2. HW enqueue delay to tx completion delay
3. TX interframe delay
4. RX interframe delay
5. RX frame delay from ring reap to networking stack
Change-Id: I836596cbd878a43955c18b4981cb5b7b43d4df5e
Do not process RX packet header TLV for low memory config profile.
Also, drop decapped frames in invalid peer processing function.
Change-Id: Ifc7721bb25d85c7e277bebf4b962d2f1bfea150c
CRs-Fixed: 2395508
wifi up/down will cause soc stop and soc
start which will allocate rx desc pool
array memory for each wifi up
This creates memory fragmentation issue
hence reuse Rx descriptor pool array
across wifi up/down and free only nbufs
CRs-Fixed: 2394666
Change-Id: Ic897c733dfba3d8829e2f2f51099cd615b8a7ea2
qdf_nbuf_cat API used to call skb_free
on src address but was later modified
so that the caller of qdf_nbuf_cat is
responsible for freeing the src memory
Due to this change in the API, the
freeing of src memory on caller side
was not taken care and will lead to
mem leak
Hence add qdf_nbuf_free after calling
qdf_nbuf_cat if it returns success.
If qdf_nbuf_cat returns failure, then
freeing is taken care as part of error
handling in parent function.
CRs-Fixed: 2411320
Change-Id: If50eb9279d0cf26a0cf57444cb69e56f11995720
We are not suppose to drop multicast loop backedpkts
received on a different radio. instead they should be
sent to dp link aggregator for setting certain flags.
Change-Id: Idae19c1b6a2caf2a1b2b58fac531c43e9c24db51
CRs-Fixed: 2351300
once in a while the HW is sending a descriptor which
is already processed by host. This can be a potential HW
issue, as a WAR we are not processing such duplicate descriptors
instead increment a counter and continue with next descriptor.
Change-Id: I6c9bc6a9fb4705b42284171a32855411aa5dd73f
CRs-Fixed: 2338543
Change the CDP abstraction APIs for ast entry find, add and delete
to avoid external references for ast entry in upper layers
Process the HTT v2 peer map messages which will be enabled for
nexthop ast entries and use these messages instead of WMI event
for HKv1 WAR where we have to wait for delete confirmation from
target event which is processed in control path
Change-Id: Ifa91a259c0762344deb8ab89e868fc5554d75543
CRs-fixed: 2354951
Splitting the wds srcport learn function to add:
1. A wrapper function where host extracts the required fields from
nbuf cb and rx_tlv header.
2. A common function which can be called from both host path
as well as offload path.
Change-Id: I2f2c0580c049f48395a3e0a265e3fb5d8aed6774
During dp_rx_pdev_attach and dp_rx_pdev_mon_buf_attach we are allocating
three times as many rx descriptors as there are entries in the ring for
AP usecase. This is not needed for MCL and may need to kmalloc
failures for allocating that much contiguous memory
Allocate only as many RX descriptors as there are ring entries for MCL
usecase.
Change-Id: I8b559a85c3899bcbdc520e71ba5da409314db160
CRs-Fixed: 2342957
Add support for smart monitor feature on HKv2.
For HKv2, NAC filtering is done by HW and NAC is
programmed directly in the AST table. The NAC entries
in AST table have monitor direct bit set and this
is obtained by host via monitor status ring.
host subscribes for packet header in MD packets.
To these filtered packets radiotap header is added
and delivered to the stack.
Change-Id: I123f986531943e376ac5c492540e01f0b03348c4
Remove the QDF_BUG in sa valid case when AST entry is not found
and peer is found as this can be a valid case in DBDC repeater
In DBDC repeater case we may receive the L2UF frame sent on 5G
radio on 2G interface
In this case SA will be valid and peer will be found for 5G VAP
mac address, but ast entry will not be found in ast_table as we
dont receive peer map events for STA vaps
Change-Id: I22e8582605f59a8691d8fcbb43627655d1a6500c
WAR to discard duplicate indications (buffers and link descriptors)
from monitor DMA seen sometimes on RXDMA2SW ring.
Change-Id: I687b782f54fbbf85ae932ee833ac9263b5879ca6
