WNI_CFG_VHT_SU_BEAMFORMEE_CAP is a global location for self capabilities
and is being overwritten with AP's capability, which is incorrect.
Because of this after roaming from an inferior capability AP to higher
capability AP, we are advertizing previous session's capability which is
wrong. Fix this by removing overwriting of WNI_CFG from function
lim_extract_ap_capability.
Change-Id: I5676598a008f3a118206e40c244faf38648e0b01
CRs-Fixed: 1088579
In function __wlan_hdd_cfg80211_extscan_get_valid_channel,
Valid channel list length is limited to 100. But if the channel list size
in NL request buffer is larger, it can cause a buffer overflow situation
while filling the channel list in the request buffer.
Change-Id: Ie6226934af3e40817ef4b44007915c36e501fd56
CRs-Fixed: 1083022
qcacld-2.0 to qcacld-3.0 propagation
While processing IPA event, uninitialized objects are used in debug prints.
Debug prints are updated to print valid values, by using proper variables.
Change-Id: Iedfb22a980554c326a3231b560212195f35ff745
CRs-Fixed: 1061660
qcacld-2.0 to qcacld-3.0 propagation
While retrieving FW memory dump, if memory is already allocated
then paddr, which holds physical address, is not updated.
This leads to pass invalid physical address while freeing FW
memory dump, if host fails to get FW memory dump.
Hence, assign paddr with physical address, if memory
is already allocated.
Change-Id: I3b3071ec3d5bc04177bfbe8447dadac47e81cb40
CRs-Fixed: 1061662
The mutex qdf_conc_list_lock is accessed, before it is
initialized and it triggers the system assert.
Initialize the mutex in cds open function to avoid
invalid mutex access.
Change-Id: Iec13a101ba2cc4a332d486b08f0c0562f648edfa
CRs-Fixed: 1089357
Add a logic to avoid processing duplicate rrm link measurement request.
Cache last processed frame with timestamp to validate new frame.
If retry bit set, compare sequence number and source address of
last processed frame. If both are matches and is within retry time
than ignore that frame, else process. Update last processed frame cache
every time new frame processed successfully
Change-Id: Ic2bff028c7bcd79d6b3dca186edb35464b1fd059
CRs-Fixed: 1088735
neighborRoamInfo is being accessed with index: sme session id, which is not
validated at multiple places in SME APIs. SME APIs are being called from HDD
where sme session id is initialized to 255 as invalid value. Avoid out of bound
access for neighborRoamInfo in SME APIs by checking against max session ID.
Change-Id: I312631a15373d75bcaae7278ff4f57778bf3fc9b
CRs-Fixed: 1088734
Scan flags WMI_SCAN_ADD_TPC_IE_IN_PROBE_REQ included in scan request will
trigger firmware probe request to include TPC IE, hence do not include TPC
IE in additional scan IEs sent from host.
Change-Id: I490d978d8a90b13f779c1e3a77a7bd16b9bd8b99
CRs-Fixed: 1088639
When sending WDI enable_disable message, there is ia possibility of
sending invalid session-id to firmware, which may lead to device
crash. Validate session-id before sending WDI enable_disable message.
Change-Id: Iee1a101d2187b66b0427b2137c80b598f82ad75b
CRs-Fixed: 1086832
When parsing multiple chain RSSI stats data from firmware, there is a
struct array TLV header that is not being accounted for. Properly
account for the struct array TLV header.
Change-Id: Ib41643ae9e859de6fd0d20a84c015e2b8f7205dc
CRs-Fixed: 1088660
Change to enable per virtual device transmit descriptors
in Kbuild for lithium.
Change-Id: I2824de2daa5bce7b0ab6993fb7f85ea01ac0849d
CRs-Fixed: 1089685
Currently in different functions we are assigning memory to
pointers and using it without checking that pointers has valid
address or NULL.
Add NULL checks before pointer dereferences.
Change-Id: I43a04fc59e56261d37e657b815b214a59cdcf838
CRs-Fixed: 1095650
CONFIG_PLD_PCIE_INIT indicates that pcie initialization
and io remap have allready been done by the platform driver,
and should not be re-done by the wlan driver.
This is to facilitate shared controll between the MHI & wlan
drivers.
Change-Id: I97704076d1efe2a8d980c8f659f05367ca82a5f6
CRs-Fixed: 1097375
qcacld-2.0 to qcacld-3.0 propagation
Currently, TDLS can be enabled/disabled by different sources
without knowledge of each other which would lead to issue
if one of the resource enable and other would disable TDLS.
Fix is to ensure that TDLS will not be enabled/disabled
until all the resources agree upon it.
Change-Id: Id8ab5ddda88fa554f2837ded3540b3c7b3afb54d
CRs-Fixed: 948121
This is a qcacld-2.0 to qcacld-3.0 propagation.
The wlan driver supports the following vendor command:
QCA_NL80211_VENDOR_SUBCMD_EXTSCAN_SET_BSSID_HOTLIST
This command supplies a "number of APs" attribute as well as a list of
per-AP attributes. However there is no validation that the number of
APs provided won't overflow the destination buffer. In addition there
is no validation that the number of APs actually provided matches the
number of APs expected.
To address these issues:
* Verify that the expected number of APs doesn't exceed the maximum
allowed number of APs
* Verify that the actual number of APs supplied doesn't exceed the
expected number of APs
* Only process the actual number of supplied APs if it is less than
the expected number of APs.
Change-Id: I41e36d11bc3e71928866a27afc2fbf046b59f0f5
CRs-Fixed: 1095770
This is a qcacld-2.0 to qcacld-3.0 propagation.
Enable the compiler's -Wheader-guard switch. This will help
catch mismatches between #ifndef and #define lines in header guard.
Change-Id: Ic05a829eadbf974598370c494a5cff10201ec600
CRs-Fixed: 1091052
Set 15th bit of flags field of ath_pktlog_hdr to indicate whether
the pktlog hdr size if 12 bytes or 16 bytes.
Change-Id: I58027053c67e749c79f6cec77da1519a9f28a2d2
CRs-Fixed: 1097280
This reverts Change-Id I2aec7253511d2ca7b08ca77d858a46f9c01d4e9d
Adding support for dumping 32 tx/rx packets during connection
by reverting above change as "exceeding skb buffer size and
leading to crash" issue is resolved with this change.
Change-Id: I951355776461706bb52eeee0527819377e7b7857
CRs-Fixed: 1097280
Add second and third connection pcl tables and next actions
for 2X2 dbs solution
Change-Id: I4722e137360a4a0d349d856b01255a0fe11d59fb
CRs-Fixed: 1068000
Propagation from qcacld-2.0
Change hard coded RX wakelock duration into an ini configuration item.
Only aquire the wakelock for unicast traffic, and if the configured
wakelock item is greater than 0.
Change-Id: I46b946ddfeae510a5446ff4ab012c09e4964a50c
CRs-Fixed: 1068594
Enable unit-test suspend/resume ioctls for all SLUB builds, for a
better out-of-the-box debug experience.
Change-Id: Iab6662a39125371ab700c8482e06cd98a3d171a5
CRs-Fixed: 1098034
ping fails due to full_reorder_enable is not initialized in the
cdp_config. Fix the full_reorder_offload initializtion and enable
the full_reorder_enable by default.
Change-Id: I3191fb96a4d2fc365d5470c3144fdca5d3f59913
CRs-Fixed: 1098023
Relocate all the files under target folder to a new
fw-api repository. fw-api repository is created to automate
the interface interface change propagation. FW CLs will be
automatically propagated to the fw-api repository.
Change-Id: Ib5533cac57ae3364323b30d54d12b620a178f03a
CRs-Fixed: 1093452
The channel_list array for pcl channels is defined with size
QDF_MAX_NUM_CHAN. The index for the channel_list array can go
beyond QDF_MAX_NUM_CHAN.
The fix is to take care that the index for the channel list
for pcl channels does not exceed QDF_MAX_NUM_CHAN.
Change-Id: I1afd7e4b0ee13e02611cbc5f56a27d1da9ef06a6
CRs-Fixed: 1093129
Add API to call platform driver function in order to get SOC related
information for in PLD for PCIe.
Change-Id: Ieec098575b874e6d15ae45ef6000767ade7d459f
CRs-fixed: 1082183
These PLD APIs can be called to get PCIe MSI related information
from platform driver.
Change-Id: I2882f5c30d6f932c36af4503ac0bec9229ef35df
CRs-fixed: 1082183
In some cases, this TXRX_PRINT is taking more time to process as
some other printks' are already in progress. As this printk is
inside spinlock, so when some other core is also competiting for
this spinlock, that core keeps iterating in a loop. After some
time spinlock bug is triggered as it is suspected that this core
is locked on this spinlock.
This fix moves the TXRX_PRINT outside spinlock so that the other
core don't have to wait to acquire spinlock due to this printk.
Change-Id: Ie0fa7addd4f2a1272a4d5e287635b6a0f016ba97
CRs-Fixed: 1095406
Define basic dispatcher framework for init/deinit. Each individual
component is supposed to define its init/deinit primitives and replace
dummy place holder primitives.
Change-Id: I35140ea7af03ce568e1732435458caf78ab28996
CRs-Fixed: 1095741
prima to qcacld-3.0 propagation
This commit removes work-queue mechanism which is used to
trigger the TDLS Discovery request.
This eliminates concurrent TDLS data structures access.
Change-Id: Id6d6b38d2b17c4b1bab9b616b52e5a2d8c3475dc
Crs-Fixed: 798119
