Use rssi_comb_ppdu of TLV WIFIPHYRX_RSSI_LEGACY_E
as RSSI reported in monitor mode on KIWI and HSP.
Change-Id: If9d0e5645c12874af32e43dae596602e446a44b0
CRs-Fixed: 3609169
For CFR test, monitor reap timer will start, meanwhile
irq for monitor status ring is also enabled, these two will
conflict and access mon_pdev->rx_status_q in the same time,
skb double free issue is reported.
If irq for monitor status ring has been enabled, skip to start
monitor reap timer which is unnecessary.
Change-Id: Ic015d370cb80604d7e4c261054ad529b64edca25
CRs-Fixed: 3614097
To prevent key installation in firmware before receiving the key from
user space. Currently, host receive the key in one thread
while simultaneously installing keys in a scheduler thread.
This change aims to resolve the synchronization issue by allowing key
installation only in one thread.
Change-Id: Ib5772cd2d0ed470756a4222aa9e11c356390f014
CRs-Fixed: 3591663
During FILTER_RESERVE request of OPT_WIFI_DP perform both
runtime resume and system resume before checking target
suspend state.
Change-Id: I2ee92c28fb34f07e372f676f34c5561795bd9c37
CRs-Fixed: 3611474
Set fast_tx when ol_stats are disabled in
ultra_fastpath to avoid Tx completion overhead.
And also includes following fixes:
cdp support to get jitter stats
cdp support to set/get vow stats
cdp support to get Sojourn Stats
Change-Id: I8bdb176edbdf210b4dedfaa117f058f57bd17241
CRs-Fixed: 3604215
This change removes two MACROs: DP_RX_REFILL_BUFF_POOL_SIZE
and DP_RX_REFILL_THRD_THRESHOLD because they have been made
configurable. Thus, they can be customized as per platforms.
Change-Id: Iba63b6fc9c9a0be764d35882f60c61867f969afe
CRs-Fixed: 3602356
Add a new QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_TX_LATENCY to
configure, retrieve, and report per-link transmit latency statistics.
When used as a command, userspace configures transmit latency monitoring
and get the corresponding statistics of the last period. When used as a
command response, driver replies the get action from userspace with the
statistics of the last period. When used as an event, driver reports the
statistics periodically.
Change-Id: I46966cd6bbad2deed7b2ad81e730170625907f67
CRs-Fixed: 3603431
Register event handler for WMI_MLO_LINK_STATE_SWITCH_EVENTID.
Add target if event handler for the
WMI_MLO_LINK_STATE_SWITCH_EVENTID event, and register
corresponding mlo manager callbacks.
Add extract API for link state switch event parameters received
Call the diag event API from MLO manager post extracting the
event
Change-Id: Ib588ee87a5c37c6a34c86ce8cbf134a273c6461b
CRs-Fixed: 3610041
Originally Change-Id: I9fa71bdb6d4e4aa93fc795cc5dd472a181325991
was brought in to fix a race condition between Rx buffers
map/unmapped in dp_ipa_handle_rx_buf_smmu_mapping() and at the
same time map/unmapped from dp rx replenish context.
The fix ensured that rx_desc is unmapped and rx_desc->unmapped=1
flag will be set atomically within a lock.
But Change-Id: Iadb40071fb733cc4de3291784df5075d5a099a8e
introduced a flaw by releasing the lock before setting the flag to 1.
This is currently causing race condition and causing double
unmap calls when IPA smmu pool unmap and dp_rx_replenish unmap
is running in parallel. This change will fix this issue, by setting
the flag before the lock is released.
Change-Id: I3533bb5f6cc0437395149cd3c718826ef0b482a3
CRs-Fixed: 3594252
Currently soc->ipa_mapped flag is set to true only after all
the buffers are SMMU mapped to IPA. This leads to a race
window where Rx buffers routed to WLAN HOST in the replenish
path are not mapped to IPA, as the ipa_mapped flag is still
set to 0. The fix is to set the ipa_mapped flag to 1, right when
the IPA pipes are enabled, before waiting for the complete
buffer pool to be IPA SMMU mapped.
With this fix, RX buffers can be unmapped and mapped to IPA
domain in dp_pdev_rx_buffers_attach() and
dp_pdev_nbuf_alloc_and_map_replenish() in WLAN host RX path when
ipa pipes are enabled.
This change also renames ipa_mapped flag to ipa_map_allowed.
Change-Id: Ibbe50cb211f858a3372e31644df2f5e98f99a292
CRs-Fixed: 3569745
Add support to trap protocol tagged packets for the unique
metadata to send it as trigger to standby application
Change-Id: I76644477d1df2a0851472283623c1dc3dbe19b8b
CRs-Fixed: 3608436
Limit non-SRG PD threshold for upto minimum of MAX allowed limit
and AP advertised value and check AP nonSRG PD threshold
with correct signedness.
Change for debug print to display param value in hex.
Change-Id: I630aa894c856226a886161ced648073782f379bc
CRs-Fixed: 3598056
Add mlo teardown support for standby active mode in
mlo setup sequences and wmi
Change-Id: Iaa727527c53ff0ad6c7682e039ef23fa537e1ae0
CRs-Fixed: 3613367
Currently, STA cannot perform SR when SAP does not include SR
IE in Beacon/Probe response/Assoc response.
This change is done to configure default non-SRG OBSS PD
parameters in FW in this case.
Change-Id: I8effbc31631267bd96a269e0bffff74139dafaf1
CRs-Fixed: 3607399
Add srng disable function for 5332. This is required for
umac reset feature. Also, Avoid srng disable for lmac
rings.
Change-Id: Ieccc86134ee4d1cc3cd8a31a62f8fdf3afd5faf9
CRs-Fixed: 3599325
Wait for firmware response only if the response
is pending after posting the txrx stats query to firmware.
Change-Id: Ib300f97bc2cc08a2947be9021ff3e399191d1c8e
CRs-Fixed: 3599915
When WLAN_FEATURE_11BE flag is disabled, if opclass is 137, the API
reg_get_subchannels_for_opclass chooses the nchans as 16.
But the maximum size of the subchannels buffer is 8.
This leads to an array out of bound access issue.
To fix this issue, modularize reg_get_subchannels_for_opclass by
adding a new subfunction reg_get_nsubchaneels_for_opclass to get the
nchans. The maximum nchans returned by reg_get_nsubchanels_for_opclass
is 8, if WLAN_FEATURE_11BE is disabled.
Change-Id: I50095768e4a232fa83f1bc69690f64a745eecb05
CRs-Fixed: 3607354
Currently SET_DISABLE_CHANNEL_LIST command is used to disable
legacy channels only.
Update this command to accept frequency for all the bands along with
the channel numbers from legacy (2.4 GHz/5 GHz) and update the
channel state in secondary channel list also.
Change-Id: Iecc9f73dca65900d82a2f2a044cb854cea58c638
CRs-Fixed: 3601253
Currently the user configured MFP state that comes from the
userspace in connect request is not handled or processed.
Instead the RSN caps from assoc IE of connect request is inter-
sected with AP RSN caps and sent to Firmware using RSO command.
This RSN caps is used in FW in selecting a roam candidate, which
was causing the cross AKM (eg:SAE -> PSK) roam fail.
Hence, use the user configured MFP value in sending the RSN caps
to Firmware.
CRs-Fixed: 3606069
Change-Id: I3facfcf3616667b4749109d26d924c3fb1537494
Currently, in some API such as
"wlan_cfg80211_tdls_add_peer_mlo", when driver gets vdev, it is
MLO vdev, so it uses WLAN_MLO_MGR_ID ID, but when it tries to put
the vdev, since disconnection happens and mlo flag is cleared,
so it uses WLAN_OSIF_TDLS_ID ID which is non-ML vdev.
This causes release of vdev reference from different id for which
it never takes reference and result in crash.
To fix this, use same debug id throughout function. For that,
generalize the get_ml_vdev API by passing the debug id as
argument to the function.
Change-Id: I5800d207fdd17692297e71a0a9cdbcb86a4c5650
CRs-Fixed: 3608817
Reconfigure the link information structure for the partner
links and assoc link when a channel switch event is received.
Change-Id: I022bb6c6e2bcf43a1efaa6234e52648142b9fde2
CRs-Fixed: 3599451
Implement handling of mlo sta standby csa beacon
and initiate the transmission of a link bss request
command tlv to the firmware for standby link.
Change-Id: Ibdf903c69757b47f301ab9fa7c563407915532d6
CRs-Fixed: 3605764
Currently buflen is not updated for int type, causing some
ini items can't be printed via sysfs command.
Change-Id: I86a991252e9fa4031959a51d6827976b6ac89c04
CRs-Fixed: 3612278
Add nl80211 vendor event index
QCA_NL80211_VENDOR_SUBCMD_TX_LATENCY_INDEX, which is used to report
per-link transmit latency statistics.
Change-Id: I62bb668ebf6b3d10c0100448eb41bde29540890d
CRs-Fixed: 3596760
To enable support for nested array policy, define macro
VENDOR_NLA_POLICY_NESTED_ARRAY to take care of the version
compatibility.
Change-Id: I2d9e3079c0a6b34c61767ec50b0c404beb3240df
CRs-Fixed: 3596074
add new ini to configure skb size and change it in each place its used
correspondingly
Change-Id: Id00c6351bf6bc1b9df5e19064b2057dadd315e9b
CRs-Fixed: 3584462
Currently from dp_set_peer_param while calling dp_set_peer_freq
there is direct return which can result in peer refleak. as there
is reference taken in dp_set_peer_param.
To fix the issue instead of direct return break and release reference.
Change-Id: Ic3cfe993de64566afc13157810b80d3b3b28d244
CRs-Fixed: 3608000
Add a vendor attribute for an EHT DUT to configure the type of TID-To-Link
Mapping Negotiation Support for testing purposes.
Change-Id: I9e39fa1acfa07bf8e2514172adeed7a7d01f8abc
CRs-Fixed: 3608356
Change is made to add debug prints for VDEV start
and peer assoc commands sent to FW.
This change is made to help with debugging logs.
CRs-Fixed: 3611450
Change-Id: I40a0991330edd4ba71b7b71f2f7cf36364f4f365
tcp_seq_num and tcp_ack_num in qdf_nbuf_cb is not used
for Beryllium, repurpose them to store RX MPDU sequence
number. get RX mpdu sequence number from DP and store
it in qdf_nbuf_cb for logging later.
Change-Id: I3c21b383d827f12a1e1ec6202a5fc17804dddc1b
CRs-Fixed: 3610468
FW diag drain may got delayed and host may not clear
all the logs in one set. Change is aimed to give more
rounds to try to complete the pending logs before suspend.
Change-Id: I06433a464d96c3c9d96207f6da7a8ea513fcdc9e
CRs-Fixed: 3602039
