Add more stats to cdp_soc_stats interface structure to ship it to
userspace. Move soc, delay and jitter stats apis from dp_main.c to
dp_stats.c.
Change-Id: Idb7f8b706e8744350d7fb2e8802d9303b3f25b5c
CRs-Fixed: 3084586
In dp_mlo_get_soc_ref_by_chip_id API add null check
for ml_ctxt
Also correct intraBSS code for mlo disabled cases
Change-Id: I25eb07e9ccd714ba819730c765dc07b00dd15482
Trigger MLO teardown and wait for response before proceeding with soc
power down.
Change-Id: Ie1d00408862459b0e5240ef3151a0d969ab65e80
CRs-Fixed: 3102143
Add QCA_WLAN_VENDOR_ATTR_ACS_EHT_ENABLED flag attribute to conduct ACS
for EHT mode. The driver can consider EHT specific parameters such as
puncture pattern for ACS when this flag attribute is indicated by
userspace.
Change-Id: I9cb0b7a6bc830a5f4f01a7a7fa5212cc6b2c3a95
CRs-Fixed: 3108987
Add APIs to get txrx peer, tgt peer and primary link peer from peer
for both MLO enabled and disabled scenarios.
Change-Id: Ie48711972dd3eef35fdd7bf736e91bfce4cd41f3
CRs-Fixed: 3107160
Add support to set enhanced stats in pdev via cdp pdev set param
functionality.
Change-Id: I4c271dfc71511a0869a795c2adbb0e0eb55ba9d0
CRs-Fixed: 3108103
First host checks below two things in host scan request:
1. Userspace sets NL80211_SCAN_FLAG_COLOCATED_6GHZ flag
in host scan request.
2. At least one 6G channel is present in the host scan req.
If any of the above conditions satisfies, Host fills all
remaining (other than channel(s) present in host scan req)
valid 6 GHz channel(s) to scan requests and set the flag
FLAG_SCAN_ONLY_IF_RNR_FOUND for each remaining channel(s).
Host sends this updated channel list via WMI command
WMI_START_SCAN_CMDID_param_tlvs->channel_list for host scan
to firmware.
With this change, driver allows Firmware to scan 6G channels
based on RNR IEs only (for colocated APs reported by 2.4/5
GHz APs).
Change-Id: I2d9d2aac58bbc521b2476756d5919647bdc265cc
CRs-Fixed: 3103873
PHY related info. has been updated when processing PPDU status
in Monitor mode, but it's got overwritten uncorrectly when
processing RX_MSDU_START TLV in VHT mode. Change aims bypassing
the wrong update, when it's working in VHT mode.
Change-Id: I2c78db66bc7222e3eebf052fb6e57d6f9d859286
CRs-Fixed: 3108059
Currently the MLO_STA_LINK flag is not getting cleared. If a connect is
received on a different link as assoc link, because of STA_LINK flag,
none of the link will be considered as assoc link.
Add fix to clear MLO_STA_LINK flag when clearing MLO capability.
And also clear the MLO_STA_LINK flag on handling pending connect req.
Change-Id: Iaf7c557786bac7754c4b33c80f0f92cb007870ae
The following issues are fixed with this change-
1. Sojourn stats were printing incorrect values
2. RSSI values were junk numbers
Change-Id: Ibed73cf370a309bf9db5baad37a0e8261c58463b
In function qdf_fill_wlan_connectivity_log, the unsupported EAPOL
packet types are not dropped.This results in setting the
log_subtype to invalid value zero and the log buffer being forwarded
to wlan_connectivity_log_enqueue. The fix is to drop the unsupported
packets by returning from the function.
The local variable log_buf,of type struct wlan_log_record, is not
null initialized.This could cause some of the member elements to have
unexpected values.This fix is to null initialize the log_buf structure.
Update Qualcomm copyright to include year 2022
Change-Id: I651329fead1e42282d7811c32eea2359ba970527
CRs-Fixed: 3079947
Currently there is no recovery reason for stats request failure.
With this change add QDF_STATS_REQ_TIMEDOUT for stats request
failure.
Change-Id: Ie9ae8259fc20b4d8829b760e818b6a1f9194a9d0
CRs-Fixed: 3106570
Add support for a new QCA attribute to pass the puncturing
bitmap as part of the DO_ACS vendor command.
CRs-Fixed: 3102366
Change-Id: Ic0e54d82e48bae695baf3be4fd388ec15f81a416
- Fixes for compilation issues after enabling
monitor 2.0 support.
- change copyright year for all files in the chain.
Change-Id: I885e257bd8ca83850656d8a1f408c1bc34920d7a
CRs-Fixed: 3086483
Currently the MAX_REO_DEST_RINGS is used to iterate reo dst ring. If the
MAX_REO_DEST_RINGS is more that no. of reo dest ring initialize, the
print is seen on console as hal_ring_hdl will be null for extra
iterations.
Add fix to use correct variable to iterate reo dest rings
Change-Id: Ibcb44dda49696a7bb029b49ce3d50acd8741590a
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicate different capabilities of the Spectral HW.
Add support to extract the FFT size capabilities from this event.
Change-Id: I9640fa51e4249b9d1c2d9d3ac5da7f1d56c9d006
CRs-Fixed: 3098880
Prefetch TX HW desc, SW desc and SKB in pipeline fashion in Tx.
completion path.
This improves the UDP DL CPU idle% by ~4.5%
Change-Id: I48096e996cd835321ce2681d3981fa94c7189f54
0 in puncture bitmap indicates subchannel not punctured
and 1 in puncture_bitmap indicates that the subchannel is
punctured.
Hence, change the puncture bitmap predefined macros
accordingly
Change-Id: Ibb52c838eecf266f5492b38c939d0f56f2420324
Since the op_puncture_bitmap is updated to indicate 1 as
subchannel punctured & 0 as subchannel not punctured, flip
the puncture pattern sent to target as target still expects
the punctue pattern to be in old format where 0 represents
subchannel punctured and 1 represents subchannel not
punctured.
Change-Id: Iba1daf79df74b4b36c65d00d8959db8d88ad0d1b
Add puncture_pattern_present bit field to ehtops.
When this bit is set, puncture pattern or bitmap is added
in ehtops, else if this bit is 0, then puncture_pattern
field is not added in ehtops ie.
Change-Id: I1a4b5d740f00006c88333f6209cf7d153922c573
EHT operation IE contains disabled subchannel bitmap, which providing
a list of subchannels that are punctured within the BSS bandwidth.
Throughput is affected if subchannels are punctured, refer to system
document to get new bandwidth score for different puncture pattern.
Change-Id: I91b9a7ec4331e78373440d4c97eb9f1ba6c45b4c
CRs-Fixed: 3098009
For a 6G radio, the API reg_get_channels_from_opclassmap currently
returns the 20 MHz IEEE channel numbers for the 40MHz 6G operating class
(132). As per the IEEE802.11 specification it should return the channel
center frequency index for the operating class 132.
To fix this issue, modify reg_get_chan_or_chan_center to return channel
center frequency index for 6G 40 MHz operating class 132.
For non-6G 40MHz channels the primary channel frequency is returned
as center. For 6G, however, the center of the entire 40Mhz band is
returned. Therefore, handle opclass 132 ( 6G band 40MHz channels)
as a special case for 40Mhz bandwidth.
Change-Id: I02f2fce418519a3e020d9b87d5ec401a73ad5ce8
CRs-Fixed: 3101303
Currently driver prepares client channel list based on indoor ap
power type and this list is given to kernel. There are couple of
issues with this approach as mentioned below:
1. Based on this list kernel sends the scan requests because of
which there is a possibility that driver does not scan channels
which are not part of LPI channel list but are part of SP channel
list or VLP channel list.
2. Kernel sends start AP as well based on this channel list, since
all LPI channel are marked as NO_IR from driver and because of
which kernel dont send start AP on these chanels which leads to
SAP start failure even if there are VLP channels available.
Change-Id: I90174920df158c8b370e541034307a9a58448c29
CRs-Fixed: 3054543
WMI_SPECTRAL_CAPABILITIES_EVENTID event will be sent by the FW to
indicate different capabilities of the Spectral HW.
Add support to extract the sscan bandwidth capabilities from this event.
Change-Id: I6ff6e5a8d80271fa62a430c986f53a321d46c66b
CRs-Fixed: 3098832
