Adding the target_if interface to get the wmi_handle from pdev,
the condidional flag is added due to different implemention of treating
the tgt_if_handle.
CRs-fixed: 2161374
Change-Id: Ia5206199afd5d41774928793d78e6648f03c181b
DFS is applicable only for 5GHz radio. Therefore, do not
allocate DFS object for 2GHz radio.
Change-Id: I5e8aec0c876e7862890fae689950bfbb4eae5255
CRs-Fixed: 2153493
Direct Buffer Receive provides the driver with a mechanism by which
target can transfer information directly into host memory via DMA.
In the Direct DMA mechanism, target will transfer information directly
into host memory via DMA. Host will allocate DMA target buffers and
place their addresses in one or more rings (circular buffers) to be
read by the target. Host will determine the features that will be
utilizing the Direct DMA service through the service bitmap obtained
from the target through service available event. Host will also
determine the Direct DMA capabilities such as the minimum number of
pointers, minimum buffer size and minimum alignment for the DMA
buffers through a separate TLV part of the extended service ready
event.
Host with the help of service and the DMA capabilities received,
will initialize and configure the ring of DMA buffers to be shared
with the target. Once the rings are initialized, host will send a
WMI command to inform the target of their locations. Target responds
to the host with an acknowledgment event for the shared configuration.
When the host requests for the data captured, target will read the
destination addresses from the rings configured and use the addresses
to perform DMA transfer. When a single or multiple DMA transfers are
complete, target will notify the host via a WMI event. This WMI event
will include information on the number of DMA transfers completed, and
the associated addresses of the buffer that was used to transfer the
data. When the host has finished processing the contents of the DMA
buffer, it will replenish the ring and place the buffer back on the
appropriate ring to make it re-usable.
Change-Id: I7542036636e62701839ef36beafb463909001853
CRs-Fixed: 2127045
Direct Buffer Receive provides the driver with a mechanism by which
target can transfer information directly into host memory via DMA.
Add following support for direct buffer rx module -
1. Add UMAC component ID for direct buffer rx module to be utilized
for object manager APIs
2. Add support for populating DMA capabilities shared by target in
object manager maintained extended service ready event.
3. Add support for Tx Ops for direct buffer rx module.
Change-Id: I2fa60e8572cbcc0d1fa7830e7e94b6e486bdcc78
CRs-Fixed: 2158297
Use table of function pointers for legacy api calls
instead of calling legacy apis directely
CRs-Fixed: 2146231
Change-Id: Ia5840208d0de5bd4e78c1d27b8ffdc0cf6cbf298
Add following vendor commands and their handlers.
1) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START
Set the spectral parameters and start scan.
2) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS
Stop spectral scan.
3) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CONFIG
Get current values of spectral parameters.
4) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_DIAG_STATS
Get stats for spectral scan debug.
5) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO
Get the spectral hardware capability.
6) QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS
Get the current status of spectral scan.
CRs-Fixed: 2146272
Change-Id: I8e048d6c21e9fb1ed286c19df0edcad46f6e6414
Removing WIN specific structures 'scn' and 'ic'
from the spectral module in cmn_dev
CRs-Fixed: 2146258
Change-Id: Ie4def4dfb401f4b1a5920277f8fa79acb67dd46b
As part of second phase of Spectral Analysis(SA)
convergence [WIN & MCL], spectral module code is being moved to cmn_dev.
Also includes fixes for checkpatch.
CRs-Fixed: 2146231
Change-Id: I939509193786b0bd2cbd5f1af64d4a94739a2af5
Add support for bangradar command to send unit test command
to firmware as a hook to simulate radar injection
Change-Id: Ieaa7eab6d452ab864a10beca1478d0e61d605107
CRs-fixed: 2113724
* Moved target type macros to global target_if header file.
* Fixed kernel panic: Channel details were written in invalid
memory location.
Change-Id: Ia9134b8dad651e53f57243c45eb93fb86ddd94c5
CRs-Fixed: 2104219
Get the MAWC based NLO parameters from HDD/UMAC and pass them to
firmware via target/if
Change-Id: I76d7c8677ee73f9a3c54b7af4943b74a6b23323d
CRs-Fixed: 2064837
soc level pdev id changed from zero to WMI_HOST_PDEV_ID_SOC (0xFF)
change pdev id in wmi_unified_dfs_phyerr_offload_en_cmd call
according to new definition.
Change-Id: I3c55dc8821c4186190515564b00f54f2427d5702
CRs-Fixed: 2090282
Analysis:
Seen kernel panic when setting the NULL country code in FW.
Solution:
Send an indication to Offload layer if Firmware fails to set
the country code.
Change-Id: Ic01ee170cfca31d840236625c1d1497426eafc68
CRs-Fixed: 2083318
Enable support for multiple nan data interfaces. The usespace
may need to create multiple NDIs depending on whether it
requires IP isolation or not.
Change-Id: I4391f2efdc6bdede52a73915531d39dd7798c39d
CRs-Fixed: 2072501
Add Passphrase and Service Name to NDP initiator request and NDP
responder request.
Change-Id: I6a189747760a15393fcbac9dc382847fef789ab1
CRs-Fixed: 2072498
Add host support for detecting SOC power collapse failures in FW and
communicating the same to framework.
Change-Id: Icee39c896802c4d7136e0b8ef442a33feeb4799c
CRs-Fixed: 2016580
Remove vdev/peer locks from trivial API's. This follows the changes from
which the lock requirement from few simple APIs are removed.
Change-Id: I9972d51dfd1a42bdedbfd0fd4e67af03d030a1f5
CRs-Fixed: 2060880
Remove psoc/pdev locks from trivial API's. This follows the changes from
which the lock requirement from few simple APIs are removed.
Change-Id: Ib5769c2234c8d57f485c0eef5a4e3c61fa170508
CRs-Fixed: 2060880
mac_phy_count should be initialized to zero before populating machphy
params. Target stop/start framework skips attach/detach which means
mac_phy_count should be initialized explicitly.
Change-Id: I9fe537c3a7e375397982174f6a63599a961ba8d3
CRs-Fixed: 2065321
In populate_mac_phy_capability, bounds on an array are checked after
writing to the array. This leads to writing to one past the end of the
array under error conditions. Check the bounds of the array before,
rather than after, writing to it in populate_mac_phy_capability.
Change-Id: I34c7415b8fb925bea5a715214e3aa3ac8a4bacc8
CRs-Fixed: 2059155
Regulatory component needs to listen to vdev messages in order to track
whether a master mode vdev is getting created or destroyed. It is also
used to kick-start the state machine. Also re-run the state machine when
user-space country code is set.
Change-Id: I5112396314a936f84dad2f0e07329f9cb237aa78
CRs-Fixed: 2048784
Add support to send 11d scan start and stop commands to FW and
process the 11d new country update event from FW.
Change-Id: I5c1588cfb5af672cdb5738784de1bd0b83bdbe77
CRs-Fixed: 2048784
Add a new target_psoc_info structure in the target if layer with the
following members
wmi_handle
target_type
target_version
target_revision
Also update the psoc data member tgt_if_handle to point to target_psoc_info
instead of pointing to WMI handle directly.
Updated all calls to psoc_get_tgt_if_handle to target_if_get_wmi_handle
which inturn calls psoc_get_tgt_if_handle and getting the tgt_if_handle
returns the WMI handle
CRs-Fixed: 2048277
Change-Id: Icb02d5f3c09f7f9bb7eff4d814ef3ce90ddb84bd
Program the DMA ring configuration to firmware using
WMI_OEM_DMA_RING_CFG_REQ_CMDID.
Change-Id: I99e5b3a369d7eeee1d1fe41782285ed54cdb82cf
CRs-Fixed: 2053958
Add handling of indirect data in WMI_OEM_RESPONSE_EVENTID.
This data then needs to be sent to userspace app.
Change-Id: Id1661f23ff000b33da9640cc44ea7be25e9f8dc0
CRs-Fixed: 2053958
The WMI API exposes the broadcast hardware filter. Modify the WMI API
to expose all of the supported modes of the hardware filter.
Change-Id: I185b149f4d1ad38692d8ff5810acd52bf84565b2
CRs-Fixed: 2040419
Offload layer uses low and high 2GHz/5GHz freq ranges and chip
supported wireless modes to populate umac ic channel list.
Change-Id: I899edd83548d68e67659b3a9273ddaaaf740540b
CRs-Fixed: 2047212
Add PMO changes to configure and clear default packet filters
over suspend and resume
Change-Id: I2e150defc8ce60e7b8346d058bfe3d9ec286aa26
CRs-Fixed: 2034458
Parse service ready extension event to get DMA ring capability requested by
firmware to enable CIR/CFR capture. This cap is then saved in WIFI_POS psoc
private object.
Change-Id: I6f6958250af06ac69b627d2f06e120955d625c62
CRs-Fixed: 2040688
The legacy call back reads per pdev frequency information (and
other information) from extended service event. The ext-service-ready
must be extracted and stored in per PSoc structure before pDev can
read it.
Change-Id: I9d6245c7c58a14b7aa08642c84b3a51b20e3d0c2
CRs-Fixed: 2047212
Call target_if_scan_set_max_active_scans() to set the max active
scan limit to WLAN_MAX_ACTIVE_SCANS_ALLOWED, for non-TLV
chipsets.
CRs-Fixed: 2049689
Change-Id: I4e5700ed5e7ffbde49652a961ecd14fb3eacaceb
Add Spectral TxOps and RxOps interfaces in
psoc towards converging the Spectral feature.
CRs-Fixed: 2028657
Change-Id: If5b46fb9d71529060df6e5b242fcc8976fce82f8
Added sa_api_tx_ops, sa_api_rx_ops and their initialization. SA API component
id is also added along with sa_api objmanager calls.
Change-Id: I2e912106dcc900e5eba19090c0157827e08264f3
CRs-fixed: 2038298
1) Defined modularized public api for cdp module
to track inactivity and over load detection.
2) Initialization calls are added to attach and
detach SON specific api.
3) operating system specific calls are replaced with qdf calls.
Change-Id: I130d1e99208d6454f5d9888774534cc6d619ad83
P2P-GO whenever goes offchannel, issues NOA. With this behavior, we
have issue whenever legacy STA connects to P2P-GO since legacy STA
does not understand NOA. To handle this case, changes are done in p2p
protocol component and the revised behavior will be:
1. By default no change in NOA.
2. Whenever first legacy STA connects to GO, p2p protocol component
disables NOA (i.e. P2P-GO will issue Self-CTS whenever it goes
off-channel).
3. Whenever last legacy STA disconnects from GO, p2p protocol
component enables NOA (i.e. P2P-GO will issue NOA whenever it goes
off-channel).
Change-Id: I113950ac3fa99ca68fcafcfe4c6095cf4b2def43
CRs-Fixed: 2035609
As part of UMAC componentization add target interface set run time
pm in progress during runtime suspend.
Change-Id: Ia5a679f5e5c290f8e4e90fded86586c98073eff3
CRs-Fixed: 2030168
Add set/get API for max parallel active scans supported.
Max active scans allowed is set from ext service ready event
handler(8 as of now). Once FW announces this capability, FW
announce value must be used instead of hardcoded value 8.
Change-Id: I2af3a34c9f55f92c47aebbd12838a8d8fc6e3ba7
CRs-Fixed: 1095299
