With Single Netdev Unified and Hybrid Mode,
the calculation of vdev stats is changed as
per the mode. For LI platforms the path
to get vdev stats is still same while for
BE the vdev stats config path is different.
Introduced Arch ops to handle this diversion.
Change-Id: If4f0f49e78d35126942cd3f1872a5856e4d0f5ba
CRs-Fixed: 3482567
Add vdev stats support for DP MLO Unified
and Hybrid Mode.
Add new CDP API for getting vdev stats for
NON_MLD interface.
Add support to get vdev stats for specific
vdev which is a part of MLO.
Change-Id: I72c8b25958649d473e1b65cee21810cd86951187
CRs-Fixed: 3455607
ETHERTYPE_VLAN_LEN is defined in enet.h, which is not being
included in dp_main.c, which can lead to compilation error
if the MULTIPASS feature is enabled.
Include the enet.h header file for ETHERTYPE_VLAN_LEN macro
definition
Change-Id: I589123a0e2161486a430c6e8d6ca18e5907252d4
CRs-Fixed: 3494435
Update rx_fast_flag for Rx protocol tag feature irrespective of
enhanced_stats_en flag.
Change-Id: Ibea2869cc182ad7d1683692d86b01de542cbddd0
CRs-Fixed: 3481654
Currently the code to support Multipass on SAP is
present along with the code to support WDS. Hence with
the code in its current state, we will not be able to
enable Multipass support without enabling WDS.
Move the multipass support code out of the WDS support
code, to be able to enable Multipass for chipsets which
do not use WDS.
Change-Id: Id17035f1ada9bde56ca2c61fd4688fa3454b0b11
CRs-Fixed: 3479991
Update dp_vdev for TDLS based on MLO connection,
if TDLS connection is from secondary dp_vdev, then
(1) update vdev->osif_vdev same as primary vdev to support RX
(2) update primary vdev's TX search to support TX over TDLS peer
else if TDLS connection is based on primary vdev, then
keep same as earlier.
Change-Id: I4b76afaa481e98c36bb5374eede8046b6cc69b4c
CRs-Fixed: 3469845
Currently the code to support Multipass on SAP is
present along with the code to support WDS. Hence with
the code in its current state, we will not be able to
enable Multipass support without enabling WDS.
Move the multipass support code out of the WDS support
code, to be able to enable Multipass for chipsets which
do not use WDS.
Change-Id: Iaafa8dc4f16314d9e3e160fe01251c3684adbf67
CRs-Fixed: 3468548
Add CDP api support for umac reset init API, these apis are expected
to be called whenever shmem is deinitialized.
Change-Id: I307c586454580ab8f83b0d515defa93d4e8ff656
CRs-Fixed: 3458268
1. Check Tx halt during umac reset and avoid halt if set already.
2. Perform SRNG disable only in case of umac reset
Change-Id: Id364a6460a64e83002b5c96e08031ad2a0bc8fd7
CRs-Fixed: 3459427
Per new design, FW will use HTT_MSDU_QTYPE_USER_SPECIFIED instead of
HTT_MSDU_QTYPE_LATENCY_TOLERANT for TX ILP support judgement,
change it in host part accordingly.
Change-Id: I0318801c4fe11ca623a99459d9f6820acb1c8fea
CRs-Fixed: 3462232
Add DP API to evaluate if TX ILP needs to be enabled,
it is only enabled if following two conditions are met,
(1) INI for TX ILP is enabled
(2) htt msdu index to qtype mapping table index 3 value is
HTT_MSDU_QTYPE_LATENCY_TOLERANT
Change-Id: I4d0c1103941b8b12b8441762dc6b45d28ee1df21
CRs-Fixed: 3447096
Add support to send RX stats when Direct switch is
enabled. For WDS extended mode get the stats from
peer object, else take it from vdev object. These will
be accumulated by PPEDS module
Change-Id: I1f73c50679c416536cfc1ebaaeaec9b307e8bf56
CRs-Fixed: 3421251
done the following changes to improve the RX path KPI
1. remove the extra invalidate in RX path as
we no longer dirty the RX TLV cache lines.
we now store the rx error codes in nbuf cb instead
of RX TLVs reserved memory bytes.
2. with features like flow tag and wds extended mode
enabled by default, the rx_fast_flag is always set
to false, this resulted in lot more instructions
being executed in RX path.
Now we ensured this flag is at least set for other
features which are not enabled by default.
Change-Id: I04c6bdc52a2b3f1248b822a108d8bd1a70abcc7c
CRs-Fixed: 3406505
Move cfr monitor filter cdp func ptr to cdp mon ops structure.
cfr monitor filter cdp function is different for 1.0 and 2.0
hence moving the func ptr to mon ops structure ensures that
func ptr is initialized appropriately.
Change-Id: I82b9c85e96f2f219521ae6ed908ade120081c748
CRs-Fixed: 3428791
This code helps to initialize and deinitialize new SOFTUMAC
based Rhine architecture.
Change-Id: I374140ccb3b31e9351c6e683c77d81a5a876472a
CRs-Fixed: 3382913
Currently dp_soc_init/deinit API's are called first for
common soc initialization/deinitialization and then architecture
level init/deinit APIs are called from base dp_soc_init/deinit.
But with RHINE architecture dp_soc_init/deinit API's are not common,
so we cannot call these APIs as base. To handle this scenario
routing all the soc level init/deinit from arch ops APIs and
arch ops APIs will take care of calling common soc_init/deinit.
Change-Id: Ibb10d452931630c917088b4d222c7fbd82621f6a
CRs-Fixed: 3404205
Refactor DP rings related code to different files, such that
both hardware UMAC based and Software UMAC based platforms
can use required code effectively.
Change-Id: Ie58eae34a2da77c2d63870fab74b9d2d9d49c14a
CRs-Fixed: 3382905
Clear the target assert seen SOC from partner_map to disengage it from
umac reset process.
Change-Id: I588ae15977b1fd989b6dccb16c5fa3a5269f5f6c
CRs-Fixed: 3433794
Add CDP api support to notify asserted soc info to DP
umac reset module, to disengage a asserted soc from
umac reset process.
Change-Id: I92ee07ed90243567dab83d0686022c8327efe1b6
CRs-Fixed: 3428265
In the case of WCN6450, sizes of the TX descriptor pools are not known
to the driver during load time. The sizes are shared by the firmware
post VDEV creation via HTT_T2H_MSG_TYPE_FLOW_POOL_MAP HTT message.
After the VDEV gets deleted in the firmware, a corresponding flow unmap
HTT message will be sent to the driver to clean up the TX descriptors
of a particular VDEV.
Add logic to handle the flow map/unmap HTT messages for WCN6450. These
messages are specific to WCN6450 and hence the logic is implemented in
arch specific HTT code.
Change-Id: I8edcabbec77abae2c238f487acb7a48b478fd149
CRs-Fixed: 3381751
Set WDI version based on SOC architecture, set WDI
version to IPA_WDI_4 for QCA_WIFI_QCN9224 chipset,
else IPA_WDI_3.
Change-Id: Ib80435e5098cfbcb9f90d4ac9cfe81ea183f308a
CRs-Fixed: 3383949
At continuous physical address limited telematics platform,
in order to avoid occasional memory alloc failure with big
kzalloc size, it's better to use virtual memory allocation
API instead. And below items will be refined to replace
malloc with valloc if CONFIG_ENABLE_VALLOC_REPLACE_MALLOC=y.
1 x 30488 = 30488B @dp_soc_attach:15189
1 x 52096 = 52096B @hal_attach:1104
4096 x 64 = 262144B @dp_rx_desc_pool_alloc:337
Change-Id: I57a6f78f690b5be1838de954933ae36129cea234
CRs-Fixed: 3426935
1. Add an API to process trigger_umac_recovery T2H message.
2. Synchronize do_pre_reset, do_post_reset_start, do_post_reset_complete
messages for all the SOCs and then process these messages in the host.
3. Synchronize pre_reset_done, post_reset_start_done,
post_reset_complete_done for all the SOCs before sending it to FW.
4. Add a new state in host for trigger_umac_recovery message.
Ignore back to back trigger_umac_recovery messages received from FW.
Change-Id: Id45d326d63e122834090844e83ad6cc7240f96af
CRs-Fixed: 3425833
