Account for the Tx buffers allocated for IPA during
init. Add this memory to the overall Tx nbuf memory
allocations. Ensure that the nbuf size is taken from
end pointer to head pointer of nbuf.
Change-Id: Ie3a46c7e7674f3f2e1bf9e0791a7eb53d4bb0b21
CRs-Fixed: 2831015
When driver doing ipa rx buffer smmu mapping,
qdf_spin_lock_bh is used to protect rx descriptor pool,
but might sleep function is called by API ipa_is_ready.
This causes kernel panic about sleeping function called
from invalid context as following call trace:
Call trace:
___might_sleep+0x204/0x208
__might_sleep+0x50/0x88
__mutex_lock_common+0x5c/0x1078
mutex_lock_nested+0x40/0x50
ipa3_is_ready+0x2c/0x60
ipa_is_ready+0x24/0x38
dp_ipa_handle_rx_buf_pool_smmu_mapping+0x2dc/0x6d0 [wlan]
Move the ipa is ready check function call outside of spin lock.
Change-Id: I5d3a79dff8a045791834733514a40f7c1ccb0d8b
CRs-Fixed: 2839292
Low memory profiles like 256M and 16M profiles support
only NSS Wi-Fi offload mode and HOST data path APIs are
not used in NSS offload mode
Disable HOST data path APIs which are not used in both
NSS Wi-Fi offload mode and in HOST mode (in NSS offload mode)
CRs-Fixed: 2831478
Change-Id: I6895054a6c96bd446c2df7761ce65feef662a3cc
As part of monitor mode init, add check for null monitor vdev before
accessing vdev_id in case prevous cleanup of monitor vdev still ongoing.
Change-Id: I0165684c8aa2abea73fa8c0d1692dac789fb20f6
CRs-Fixed: 2835758
During interrupt mask initialization, bitmap of tx ring
mask and reo dest ring mask are filled in host mode based
on the number of rings.
When NSS offload mode and dynamic HW mode are enabled,
interrupt reset is done based on modified ring count.
This is causing invalid hal_srng access for interrupt
context which are not reset.
So, resetting tx ring mask and reo ring mask based on host
mode ring count. Also reset when mask value is non-zero.
Change-Id: I6e3ef2df7a1f71aa17ebf8499467b39bc84f88bf
Add drop statistics for duplicate EAPOL frames received
in the REO exception ring as OOR frames. This will help
understand if EAPOL frames are getting dropped which could
cause connection issues.
Change-Id: Ib9d5a3c04ce6638c65166f02261af5c526cc47eb
CRs-Fixed: 2814633
Change the alternate indication_0 to WBM instead of
REO2TCL. This is done such that, WBM takes care of
the of the de-linking of the link descriptors and
release the buffers to the respective WBM rings.
WBM should take care of the NULL entries if present
in link descriptor as WBM internal errors.
Change-Id: Ie084e54861bb4611a45cd724bb32d211c62f4f21
Some AP disables AMSDU in BA256 mode, this has draw back
with KPI in HE mode, so leave a config field to use 64 BA
forcibly to make high KPI with these types of AP
Change-Id: Ia69ffe118fd5bbda78cfb98126a483fcf305294e
CRs-Fixed: 2828304
Add CDP API to dump the SW head pointer and tail pointer
of a few important srngs. This can be used to debug or
get a direction when the device doesn't dump ram info.
dp_print_ring_stat_from_hal is not being used, since without
device force wake recipe in place, reading hardware hp/tp
value can lead to NOC errors.
Change-Id: Ib0381acb007f1b4431f6a02cd9762e461d6393e8
CRs-Fixed: 2826084
In mission mode, when PKTLOG is enabled, dp_mon_filter_update()
will reset the RXDMA2SW ring filters which will block the RX
completely leading to connection issues.
Reset monitor mode filter only when monitor VDEV is configured.
Change-Id: I0f55370af74a5f538ef926d8f8d61bffaa64a69e
CRs-Fixed: 2827739
In HKv1, if smart monitor mode is enabled on RE,
we are getting invalid peer frames with RA as STA
mac of RE and the TA not matching with any NAC list
or the the BSSID.Such frames need to dropped in order
to avoid HM_WDS false addition.
Change-Id: If641052c3f0ac5ce49afcc52062462d8b7eaa0e6
If a continuation bit is set in msdu desc info and reported
length can fit in single buffer avoid SG processing
Change-Id: I6e8c3e1e657c372d5d915450dda20ba26bac495f
Only BAR frames with REO/RXDMA push reason as error are handled
in host. FP BAR frames without errors, are routed to host
via REO/RXDMA with push reason as route.
Instead of leaking the buffer, handle the routed BAR frames
gracefully. Free the buffer and log stats to detect such
cases.
Change-Id: I6e09e8b948d9b2d9d3de3b6558e54f0c70901c62
CRs-Fixed: 2814303
FW uses CCE rule to exception all mcast/bcast frames. Ast_idx
override does not help in sending them to TQM directly.
Change-Id: Iad6c1e8073f5c5d0513adb7097d5024177b7b7f5
Upper layer (OS_IF) can mark certain packets to be sent
to FW. Mark such packets as exception, so that it is sent
to the FW.
Change-Id: I44af2b06793712be7236f831b6b2604123d72bb1
CRs-Fixed: 2813172
Rxdma err destination could still grow even after monitor
status ring filters are reset as part of monitor mode
disablement which will result in RXDMA2SW ring back-pressure.
Fix is to reset RXDMA_BUF ring filters when monitor mode is
disabled.
Change-Id: Ifd56f6bdbf6a5e4c5d39fc5c71dd85925e3d5f33
CRs-Fixed: 2818011
Excessive logging was detected in dp_tx_msdu_multiple.
To fix this, Reduce log level when tx_hw_enqueue fails.
Change-Id: I66d58d12aff037896c7623c6755a443092673a88
CRs-Fixed: 2823453
RX error stats from REO2TCL ring is just for RX 2K jump/
OOR frame, host should not count them as rx_mpdu_error
stats for user space which will think wifi connection is bad
easily in noise environment.
Align this part logic with Helium that count TKIP/MIC error
frame, for HST/HSP, use error counted from RXDMA instead.
Change-Id: I2e488bedaed166ce410c53eb7e9710d7933c2717
CRs-Fixed: 2821147
Number of DP rings used in HOST mode and NSS offload mode differ
and in current scenario the rings are allocated unconditionally.
Allocate only required number of rings based on the HOST mode and
NSS Wi-Fi offload mode and based on the number of radios supported
per SOC.
CRs-Fixed: 2790504
Change-Id: I20ce1908da47c197ea3b406f8704b964f3d8f7d1
Add cfg_dp_sg_enable to get ini key dp_sg_support by cdp_cfg_get.
And add some comments for CFG_DP_SG to clarify more.
Change-Id: I34de242eacbdcf55398afe64b91f5534f205fa22
CRs-Fixed: 2822536
Add reo ring descrptor swap in case of big endian platform.
Convert msi_data into little endian format before writing into
MSI_DATA register. Also change into little endian format while accessing
the shared LMAC registers.
Change-Id: I07f4ae4e6df4608201b63d325c2cbc37436d1592
Use sizeof instead of REG_BAND_UNKNOWN to fix buffer overflow written
in the dp_soc_interrupt_detach.
Change-Id: Iffad59346c487e34632f1c60b2c88e635f6e83a0
CRs-Fixed: 2822433
The TX notify comp flag is used only by MCL, hence moving
to the MCL this field to the MCL specific cb private structure.
Change-Id: I707ab9252dea705552df9678eedd8501f479672e
Currently the rx tids are getting setup for the
self peer in monitor mode. This leads to sending
commands to the reorder-hw and the hardware generates
its responses.
In Monitor mode, none of these rings are reaped, since
the reorder-hw is not used. This opens up a possibility
of backpressure on the reorder-hw rings.
Skip setting up the rx tids for monitor mode
self peer, since they are not used.
Change-Id: I37bade9ef5c8bd536a01371cc059ebbcfb85ee5a
CRs-Fixed: 2815866
REO remap register direct writes as part of SAP stop could
result in a NOC error if the UMAC is in low power state.
Fix is to use shadow register writes for REO remap and
WBM HP registers.
Change-Id: Ie515c3d28f4ccdd99a3757808f1ab6c5cf373e3d
CRs-Fixed: 2813105
As monitor mode is not supported on LM256 profile,
disable rxdma1 functionality on same
Change-Id: I64e5de02d56801bfd46e32a6c64a1286e4d7ecb0
CRs-Fixed: 2819904
While in mission mode, add support for monitor mode to be created as
another interface to support STA + monitor mode. Create a new
mon_vdev_timer to be started during vdev_attach and calling
dp_mon_vdev_timer to reap monitor rings while in this mode.
CRs-Fixed: 2815653
Change-Id: I631deb5121d7997cded524befd11883079a23aaf
In monitor destination ring, sometime buffer with
msdu_len zero is observed.
Drop frame if msdu len is zero.
Change-Id: I327e180a52ec5f4e0d9fc2d0391262cba0dbe09d
currently qdf_nbuf_len is being used to get the length of
the tx pkt, but this API also interprets the nbuf CB field
to adjust the length if extra_frags are present.
The concept of extra_frags is applicable only for legacy
drivers but in lithium as cb is not reset in the driver the
qdf_nbuf_len API is mis-calculating the length if extra_frag
field in cb is set by any network stack protocol.
To avoid this qdf_nbuf_headlen API is used to get the length
of the TX pkt.
Change-Id: Ie1e0b4b2168daf93ae77f4c995f5c3476a27b433
Currently, we decrement active_work_cnt in a while loop in delayed
register worker and later on make a "allow_l1" call to enable L1ss.
The bus suspend routine depends on the value of active_work_cnt to
determine if any register writes are pending. In case there are, bus
suspend is rejected.
As a result its possible that when bus suspend happens, the
delayed worker while processing the last remaining enqueued
write, makes the active_work_cnt to 0. This will allow the bus suspend
routine to continue to disable the bus, even before the
delayed-reg-worker has called allow_l1 and run to completion. This may
lead to a NOC error while calling "allow_l1" API from
delayed-reg-worker.
Hence, move the decrement of active_work_cnt to the very end in
hal_reg_write_work function.
Change-Id: Iec602f97c953df1c6a018310fd02ab458547ce3a
CRs-fixed: 2813733
Due to recent FW changes not filtering out BAR frames, redirect these
frames to REO exception ring and handle as normal data packets.
Change-Id: I4540929fddab14de57a23f6364fc916a70057cbe
CRs-Fixed: 2795499
In HTT MEC notification, wifi vdev should be mapped from
vdev_id provided in HTT WBM completion status word
Change-Id: Ic0a440efdbdc1ee99f27fb4797ee068599d06268
This change fixed compilation error about implicit-fallthrough and
pointer to in cast.
Change-Id: Iea2c25d97d8a039ed0f8083078427a8f8de70cd1
CRs-Fixed: 2814658
Update log level of peer null check from err to info
in dp_tx_comp_process_tx_status as excessive logging
is detected.
CRs-Fixed: 2811236
Change-Id: I1b0ae723adb90b4b915f11479b5408fde147864c
Delayed register write work needs to be flushed before bus suspend to
make sure there are on pending writes after driver's bus suspend routine
exits. In case delayed work context is not able to finish before the bus
(PCI) is suspended (DRV), it may lead to a NOC error.
Change-Id: I40cbcec5d23ddd75ec87aed69ac45d95510fa880
CRs-Fixed: 2813733
HTC packets were mapped but not unmapped or freed. As part of
hdd_wlan_stop_modules(), all nbufs will be freed in misclist
and TxQueue.
Adding debug change to count number of htc packets failed to
send and count number of nbufs in misclist are skipped when
freeing them.
Change-Id: I868621a67cf89d9b84e202843990f576973ec334
CRs-Fixed: 2807407
