Add support to selectively enable clock gating for supported
DSI clocks using a new debugfs node - config_clk_gating. This
new node would be created for every display node. See below
for usage examples:
To enable clock gating only for BYTE clock:
echo 1 > /sys/kernel/debug/<display_name>/config_clock_gating
To enable clock gating only for PIXEL clock:
echo 2 > /sys/kernel/debug/<display_name>/config_clock_gating
To enable clock gating only for PHY clock:
echo 4 > /sys/kernel/debug/<display_name>/config_clock_gating
To enable clock gating only for all clock:
echo 7 > /sys/kernel/debug/<display_name>/config_clock_gating
To disable clock gating for all clocks:
echo 8 > /sys/kernel/debug/<display_name>/config_clock_gating
To go back to default setting:
echo 0 > /sys/kernel/debug/<display_name>/config_clock_gating
Change-Id: I83713d86eb1b9675d40d51fc20de81cca0aeb1c0
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
If we set esd check mode as TE signal check for video mode panels
the panel will be continuously reset. This change doesn't allow
TE signal check as ESD check mode.
Change-Id: I42a09d605b259d9f06c67cb126d3684ed4489699
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
This change fixes the invalid memory access. It allocates
enough memory so that out of bounds access is avoided.
Change-Id: I0749eac54cfa91891a4377b99fbd7f24dd3bd02a
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
This change updates the checks needed before setting the flag
to enable panel switching between command and video mode.
New crtc active state remains disabled and it causes a failure
in the previous case.
Change-Id: I059731d2faa0f7844d3784fcf7694509fbba3ff7
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
This change populates values for per_pipe_bw_high
from the device tree. This value is exposed to userspace
as the bandwidth per pipe available in the no VFE
scenario.
Change-Id: I61346ee55dfd4b6b0736ecf0b96e061f4f3934c3
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Each mode_set call makes sure that previous frame is triggered
and triggers the esd check if there is pp_timeout. This may
lead to deadlock between crtc commit and event threads. Crtc
commit thread acquires the rc_lock and triggers the flush_thread
API on event_thread. Event thread again tries to acquire the
rc_lock to wait for frame. This can be prevented by avoiding the
pre_kickoff call from esd_failure notification if it is generated
through pp_timeout.
Change-Id: I561fef0345976ab0cae61aab6718214c47fa1393
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Fix possible out-of-bound access and NULL pointer
dereference in SDE and PLL driver.
Change-Id: Ic5c34b3b4c3e983413a0351c38206cf3f3ab3b1f
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Log ping-pong current line count during ctl-start
and rd-ptr interrupt. This will help in debugging
ping-pong timeout issues.
Change-Id: I58185330fe9e8a64f48d6da60c974b23a9e68b44
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Reduce the log level from error to debug for invalid
master encoder in encoder restore path during idle
power-collapse. This would avoid unnecessary logging
when concurrent writeback gets enabled after a
power-collapse event, the restore happens based on
encoder_mask attached in the crtc before the actual
enable call for the cwb encoder.
Change-Id: I54cd7de62f1a9030f68a963c8ed27ff098302e04
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Change updates dsi clock calculations for command mode
as per recommendation. Now dsi clocks are tied to
frame transer time. Propagate correct frame transfer
time to hal to update mdp clocks and bandwidth needed
accordingly.
Change-Id: I46f9038622ddd47cc53c5f3d54229f69a7008c8a
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Perform mst phy operations during suspend/resume
to allow sinks to be in a correct state. A usbpd
api must also be called before and after the phy
operations to allow the system to go into deep
suspend and resume in a timely manner.
CRs-Fixed: 2363921
Change-Id: Ie21ef9b1caf2044e598466373a6059d2a1e5e58c
Signed-off-by: Fuad Hossain <fhossain@codeaurora.org>
Fix the crtc status to print the formatted src
rect for all the planes and log the true inline
rotation flag. Move the event log in splash cleanup,
so that it is not logged for every frame.
Change-Id: Id2a323254f632a649c335455f5ef53b7d805c3a5
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Remove the redundant register dump sub range
registration for DSI ctl/phy as it needs only
the base registration, since it is considered
as a single block.
Change-Id: I11546bfcde05d02849c53577c4546dcfa9203539
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
When trying to get the display up on my sdm845 board I noticed that
the display wouldn't probe if I had the dsi1 node marked as "disabled"
even though my board doesn't use dsi1. It looks like the msm code
adds all nodes to its list of components even if they are disabled. I
believe this doesn't work because all registered components need to
come up before we finish probing. Let's do like other DRM code and
only add available components.
Change-Id: I00738a7f9fa572f12067066e86ea7974693b3aab
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.kernel.org/patch/10712329/
Git-commit: d1d9d0e1724d6a7123b4280fdf6630ae70f96c9c
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Add extra sleep between SST and MST mode if MSTM_CTRL is not cleared
at hpd to make sure dongle exit from previous MST state.
CRs-Fixed: 2411911
Change-Id: I5b1785c71a91df95167bf5083e9d752a275872a8
Signed-off-by: Xiaowen Wu <wxiaowen@codeaurora.org>
Signed-off-by: Fuad Hossain <fhossain@codeaurora.org>
Use the EXTENDED_RECEIVER_CAPABILITY DPCD register fields,
if present, for enabling HBR3 link rate on supported targets.
CRs-Fixed: 2438457
Change-Id: I505d998f31f79162dc290fc47fd9fbba51527982
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Add a release operation to free the mst port object when
the object refcount becomes zero.
Change-Id: If628e6da7ccf90d334574ed0f627788fb0a1fa2f
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Add required changes to makefile and enable the configs
for LITO support.
Change-Id: If6da5a5c139220680b0892d0cc8d408a296f1635
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
