Modify wmi handle and wmi unified interface API
for common wmi layer.
Register UMAC callbacks using opaque callbacks.
CRs-Fixed: 978579
Change-Id: I505fe4ac339213db30bb00695234c4cfea5a5908
Add new directory structure and new files for
tlv and non-tlv implementation.
wmi layer shall not use global context of other layer,
remove global context and unused methods.
CRs-Fixed: 978547
Change-Id: I230f59052d9db8e1660cc087b09e03641227f490
Initial host-common file folder cleanup and moves
on top of baseline reference of MCL WLAN driver
SU#5.0.0.160.
Move dp, ht comm, hif, wmi and qdf folders one level up
Change-Id: I2120898024b1eafd5d651c48768dbf48bf05995d
Sync up wlan-cmn.driver.lnx.1.0-dev to CAF 5.0.0.160
from 5.0.0.149 release as baseline for subsequent win
and mcl convergence refactoring.
* commit '0219ae6': (554 commits)
Release 5.0.0.160
qcacld-3.0: Add wma handler for vdev delete and peer delete responses
Release 5.0.0.159
qcacld-3.0: Fix Compilation error on WLAN_FEATURE_11W disabled
qcacld-3.0: Update channel width and center freq
qcacld-3.0: Move sta state to not connected after try disconnect
qcacld-3.0: Remove #ifdef FEATURE_WLAN_LFR from HDD
qcacld-3.0: Remove RRM ie in Assoc Req based on AP capability
qcacld-3.0: Fix fw statistics parsing on the host
qcacld-3.0: Fix IPA-uc callback in NON-SMP system
qcacld-3.0: SAP DFS-3 Feature support in DFS layer
qcacld-3.0: SAP DFS-3 Feature support in WMA
qcacld-3.0: correct phy_mode in hdd_chan_change_notify
qcacld-3.0: move hif_bus_open to hif_open
qcacld-3.0: Remove hif_claim_device
qcacld-3.0: Remove epping context from cds
qcacld-3.0: Enable Tx beamformee in SAP mode
qcacld-3.0: Set the IMPS enable/disable based on INI
qcacld-3.0: Fix memory leak in case of fw reset stats command
qcacld-3.0: Use appropriate API to get total free descriptors
...
qcacld-3.0: Enable athdiag debug support for SNOC devices
qcacld-3.0: Remove support of power gating parameters
qcacld-3.0: Add log in vos_mem_alloc if kzalloc takes more than 3 seconds
Change-Id: I903d2b6edfb715570daffbcfcdb46866f04737dc
CRs-Fixed: 688141
Sync-up wlan-cmn.driver.lnx.1.0-dev branch to caf master version
of host-common driver that is exactly same as qcacld-3.0 driver
version 5.0.0.149
* origin/caf/caf-wlan/master: (294 commits)
qcacld-3.0: Lower the log level for unhandled Action frame logs
qcacld-3.0: Add disconnect to the head of sme pending command list
Release 5.0.0.149 QCACLD3 WLAN Driver
qcacld-3.0: Enable emergency reaping for wmi pipe.
qcacld-3.0: add retry logic if htc_issue_packets fails
qcacld-3.0: Ignore HTT_T2H_MSG_TYPE_MGMT_TX_COMPL_IND from FW
qcacld-3.0: Do not reserve mgmt descriptors
qcacld-3.0: Use appropriate list API
qcacld-3.0: Remove per vdev tx descriptor pool
qcacld-3.0: Enable enahnced flow control
qcacld-3.0: Add support for telescopic PNO
...
Release 5.0.0.140
...
Initial readme for WLAN Host Driver for iHelium
Change-Id: I36e7222946f442159390bd78a65ee5dc6876b582
CRs-Fixed: 688141
- Add handler for the vdev delete and peer delete response at WMA.
- As part of timeout handler, assert if the response is not
received in 3 seconds.
Change-Id: I7b20254013266414174f686e1f3918822adc65d8
CRs-fixed: 960173
eCSR_AUTH_TYPE_RSN_8021X_SHA256 is defined only when 11W feature
is enabled. The code is using the identifier
eCSR_AUTH_TYPE_RSN_8021X_SHA256 without conditional compilation.
Access eCSR_AUTH_TYPE_RSN_8021X_SHA256 under 11W feature flag.
Change-Id: I5e1e513c12cf526045991749a487ac89d1773659
CRs-Fixed: 947938
qcacld-2.0 to qcacld-3.0 propagation
"cfg80211_chandef_create" doesn't support channel width "HT80". If
create chandef by it, channel width set to HT40 when working on
SAP VHT80 mode. Which cause a mismatch between supplicant and host
driver. Update channel width and center freq for VHT80 mode
Change-Id: I9c5734fca4bcc02436aea8684ca9d0b968eb1dee
CRs-Fixed: 944618
qcacld-2.0 to qcacld-3.0 propagation
If a connect is received with previous connect already in progress,
sta connect state is moved from connecting to disconnecting and
disconnect is initiated to stop the previous connect.
If previous is present in sme/roam pending queue the disconnect
will abort the previous connect by removing the cmd from pending
queue. In this case the connect state is not moved back to
not connected from disconecting.
Thus the current connect command fails and all new connect command
will fail as the connect state will always be in disconnecting state.
To avoid this, move the connect state to not connected, once try
disconnect is issued internally.
Change-Id: Ia563f85df84cb9dbb3d3a82bc97127d39e7b1421
CRs-Fixed: 961559
The condition #ifdef WLAN_FEATURE_LFR is used to include some of
the roaming code. It has been defined for all the recent driver
builds. Roaming code underneath is permanent part of the driver.
Remove #ifdef FEATURE_WLAN_LFR compiler flag from HDD so that the code
will always be compiled in.
CRs-Fixed: 936683
Change-Id: If5010bc1470a35b2f1516a5c5d10461352fd87fc
RRM ie should not be present in association req if AP doesn't
support 11k. As a part of fix add the check to append RMM ie only
if AP support 11k.
Change-Id: I4e521dbdbdd5b083360405f26913278788c86555
CRs-Fixed: 961737
For iHelium, the flag AR900B is defined in the firmware however
it is not defined on the host. This is causing a mismatch in the
statistics structure between the host and the firmware.
Temporarily enable this flag on the host. Eventually, this flag will
be replaced by a iHelium specific flag on both the host and the firmware
CRs-Fixed: 964909
Change-Id: I1a13db22448a099ea51602108eb5626e878e2c2e
IPA callbacks need to be processed in tasklet
context in NON-SMP configuration as rx thread
is not used in NON-SMP context.
Hence Process IPA uc response in tasklet context
for NON-SMP configuration.
CRs-Fixed: 960302
Change-Id: I98d69dbdc1083f43035fe264bbee668e5efd5eee
Introduce DFS-3 support changes in DFS layer.
Add support for per segment based queuing, processing
and pattern matching of the radar events in 80+80 channel
width mode, when both segments are dfs.
Also, add support for parsing the new DFS-3 radar summary
report and extract the segment ID on which a phyerror is
seen. Report the segment ID on which the radar has been
detected to the WMA layer to add only radar detected 80MHz
segment channels to be added to NOL in 80+80 MHz channel
width mode.
Change-Id: Ib9ed2122844cef5fde2b632accc8c798e86bf7a3
CRs-Fixed: 964262
Adding support for parsing the WMI_PHYERR_EVENTID
for DFS-3 in WMA event handler. Configure the hw
board id to DFS module fetched from the wmi service
ready event.
Change-Id: I003fab790c7f46b54e5d41bcf1bbfa16f0cdc722
CRs-Fixed: 964262
qcacld-2.0 to qcacld-3.0 propagation
The sap Context related phyMode should be used
instead of the phyMode in hal. Otherwise, the incorrect
channel width will be reported to supplicant.
Change-Id: Ic0ce7861a786de5aef8b43c6aa0fde9f600b08b2
CRs-Fixed: 909668
hif_claim_device does not serve a purpose in copy engine.
The usage and implementation of hif_claim_device need to be
reexamined for sdio and usb. It should not store the device
in a ce specific data structure.
Change-Id: I0847e152ae3a1ca57d5c6937d6929918063cc362
CRs-Fixed: 967244
cds_get_context was not supporting epping. Allow epping to manage its
own global context since it is a top level module.
Change-Id: Ic5faf885c83109162be141788a5f8871a4e35cef
CRs-Fixed: 967244
Currently Tx beamformee feature is enabled only in STA mode.
Add knob to enable or disable the Tx beamformee feature in SAP
mode
Change-Id: I6ea218b3bff6c973688aad716a3f1a3c8acc469b
CRs-Fixed: 963034
Fix memory leak in case of txrx_fw_st_rst command where
we are not expecting any response from firmware.
CRs-Fixed: 964465
Change-Id: Iad91cb5557ef167d126ef68e07f02445ad7a0b97
Remove unnecessary acquiring of SME lock in sme_roam_free_connect_profile
since this function does not access any SME structures.
Change-Id: I0ddafc4276ef5028b48fda0ae3ea4e6a0c23245e
CRs-Fixed: 958839
Add new argument for mac_ctx in definition of tx_timer_create macro
so that its caller can use any local variable name for mac context.
Currently pMac is hardcoded as first param in definition of the macro
which prohibits caller of that function from using any other name.
Change-Id: Id901424ba16846eab62c00a80d48a5c85c73bea6
CRs-Fixed: 824222
In case kmalloc fail goto end of function and properly free
other possible allocated memory buffers.
Change-Id: I41d7577471b475b0a2a0daa83c6ffc845314ceb4
CRs-Fixed: 958755
Rename API cds_is_load_unload_in_progress() to
cds_is_load_or_unload_in_progress() for clarity purpose.
Change-Id: I209c661ccee760f822d5df53577d822f3c741b37
CRs-Fixed: 964217
cds_is_load_unload_in_progress is checking for both driver
load AND unload states. This is leading to all external threads
still enter in driver when driver has already started unload
clean up process. Fix this API to check either load OR unload
in progress driver states.
Change-Id: I4cd446393346bc5c085bc9a92ee68f46f1ec5097
CRs-Fixed: 964211
Driver unload is not waiting for external threads to exit
before starting clean up process. Add CDS SSR ready check
for driver unload such that driver unload waits for all
external threads to exit before cleaning up driver data
structures.
Change-Id: Ic5ac1b770dea8e470ed8dcce50a4f66451f918f1
CRs-Fixed: 964151
scan complete callback function is not
freeing scan request memory after scan completion.
Free the scan request memory after scan completion.
Change-Id: I2636e3b4576d2c86d88dc3e7684a196ed1838297
CRs-Fixed: 964244
In HDD, hdd_wlan_startup which is called by probe is beast of a
function to maintain. Over time it has grown to such an extent
that it is almost 800 lines of code with in a single function.
Divide the beast into logical smaller functions.
Fix style issues like conditional compilation with in the
function and other minor ones.
Change-Id: Iec2dc3aac934bbb90b87d4e8581e877e5b0a561c
CRs-fixed: 959287
In HDD, hdd_wlan_startup which is called by probe is beast of a
function to maintain. Over time it has grown to such an extent
that it is almost 800 lines of code with in a single function.
Divide the beast into logical smaller functions.
Create separate functions to update country code from module
parameter and initialize thermal mitigations settings in SME.
Change-Id: I84cf611347a5abadc16eeb46fed90934913e09ed
CRs-fixed: 959287
In HDD, hdd_wlan_startup which is called by probe is beast of a
function to maintain. Over time it has grown to such an extent
that it is almost 800 lines of code with in a single function.
Divide the beast into logical smaller functions.
Make separate function to open the interfaces at probe time.
Change-Id: Ia0044f5b0d0f009950d62556e09928ac578a1d4b
CRs-fixed: 959287
In HDD, hdd_wlan_startup which is called by probe is beast of a
function to maintain. Over time it has grown to such an extent
that it is almost 800 lines of code with in a single function.
Divide the beast into logical smaller functions.
This is the first phase of changes to add a separate function to
allocate and initialize HDD context.
Change-Id: I35b6c95c1b09f853e83752123c44e8d21c8af50a
CRs-fixed: 959287
Remove typedef tPowerdBm. Rename and use linux style for channel
enum, channel state, channel power and country source data
structures.
Change-Id: Iebc59e6f001ccdb403c7445f4cea02c6a8141366
CRs-Fixed: 856727
Remove the 4.9 GHZ channels from the driver stack.
4.9 GHZ channels are not being used for any country,
so remove them.
Change-Id: I135f997bb4c8ad7a536596b4e89eb037f41e0c73
CRs-Fixed: 856727
FEATURE_STATICALLY_ADD_11P_CHANNELS was a temporary solution for
builds that were not defining DSRC channels in db.txt. That
restriction no more holds true. Also correct the list of DSRC
channels in function cds_is_dsrc_channel.
Change-Id: I1146ec9702a8eec801b635a276e981962dd42817
CRs-Fixed: 856727
Change regulatory data structures and APIs to linux style.
Change the references to the data structures accordingly.
Leave data structures that would be deleted in subsequent
iterations as is.
Change-Id: I68dcd3485d3fb3d98f648b5844508356c3f3c29d
CRs-Fixed: 856727
Remove the local country to regdomain mapping in the driver.
Return a fixed regdomain index 0 to the caller. Also update
copyright for cds_regdomain.h for 2015.
Change-Id: I33e0a861b0a3bd95b20becb2d765b8300688ec4c
CRs-Fixed: 856727
