Add below changes as part of 36th Reg DB version
a.) Update FCC1_CLI_LPI_REGULAR_6G to FCC1_CLI_LPI_DEFAULT_6G.
b.) Add sub 6g domains APL3_AP_VLP_6G and APL3_AP_LPI_6G and
reg rules for new domains.
c.) Add superdomain FCC1_6G_07 and APL3_6G_08 for Brazil and UAE
Change-Id: I2d379762f9d5953c47c88e08511fe227ea25ce85
CRs-Fixed: 3057765
Fix MLO compilation issue while exporting the symbol
wlan_mlo_link_peer_delete.
Change-Id: I911917ab7f142fdc49ea99e9613ddb6fb86b5ab3
CRs-Fixed: 3067718
Each FFT bin value is represented as an 8 bit integer
in SAMP message. But depending on the configuration,
the FFT bin value reported by HW might exceed 8 bits.
Clamp the FFT bin value between the min and max value
which can be represented by 8 bits. For linear mode,
min and max FFT bin value which can be represented by
8 bit is 0 and U8_MAX respectively. For dBm mode, min
and max FFT bin value which can be represented by 8 bit
is S8_MIN and S8_MAX respectively.
CRs-Fixed: 3056458
Change-Id: I9ec75f781a130d3ed0d0d9393975fd5874961ce0
In the new wifi specification 11be mode support is added, add a new
11be dot11 mode to qca_wlan_802_11_mode.
Change-Id: I9c5238ffaac96fcdf83e7c342a053dda7fc1f205
CRs-Fixed: 3050936
If vdev is not in disconnected or connected state,
then the event is received due to connect req being flushed.
Hence, ignore this event
Change-Id: If7f51496fcca283cb6559b027a21df82ae9ec7d2
This change aims to fix compilation error caused by implicit
conversion between enumerations when -Werror and
-Wenum-conversion are enabled,
Change-Id: Iaabdbe6203f6740b5d0bedade0773f1d2304aeaf
CRs-Fixed: 3063133
Add fisa deletion support by invalidating the fisa
DDR entry when adding a new entry.
Change-Id: I02189e22e09ca0ef5e1fdb5952c7e72cd87d3673
CRs-Fixed: 2954060
In case of successful transmission If MPDU tx
is retried more than the threshold then
increment MPDU retry count by transmit_cnt / threshold
Change-Id: Idbc7e2d0579ff68e272132fe4ffe9f951c4aacf5
CRs-Fixed: 3058464
Avoid using ast_entry in intra_bss handling, instead use
da_peer_id directly from the msdu_metadata
Change-Id: Ic586f297e8e393504d7d399cff7a67c3035aa11f
Currently reg work is being cancelled in deinit path,
cancel work will remove all the pending work items
and wait for completion of current executing work.
But in reg work case even pending work items has to be
executed because we don't want to skip HP/TP values update.
To avoid this make sure all the pending reg work items are
flushed then disable the work for further queueing.
Change-Id: I2ba1e26cf41fb3b0c33ec584c56525cbfac94d8f
CRs-Fixed: 3065038
sw_exception bit will be marked in reo dest ring descriptor for
FW re-injected frame, get this bit and save it in skb->cb,
this bit value can be used for FISA further check.
there is no reo_dest_indication field in reo dest ring on beryllium,
so share same cb member for sw_exception and reo_dest_indication.
Change-Id: I2321121be7dda68ed19faca177d868c7e8ba1dbf
CRs-Fixed: 3056156
Add the attribute QCA_WLAN_VENDOR_ATTR_SCAN_PRIORITY to configure the
priority of vendor scan relative to other scan requests.
Add the valid values that this attribute can take.
Also, add an API to convert NL80211-based scan priority value to internal
scan priority value.
Change-Id: I6c62166c2dd6ea0880b332496b1e4bb0b41840c6
CRs-Fixed: 3044332
Update element ID extension values for EHT Capabilities, EHT
Operation, and Multi-Link IEs. The values are as per current ANA
database.
Change-Id: Iaf8399170340d706acb1ecbd0f8b7050c4f6228d
CRs-Fixed: 3032233
Add API to get channel utilization values from DCS , which can be used by
other components, like EasyMesh.
Change-Id: If0fa2b98a6c3deb80deea814d941614d1c41f01e
CRs-Fixed: 3054014
This change introduces the new roam set param WMI command to set
the roam params from host to FW.
Also added a fail_bssid param in wmi_roam_result TLV to know the
roam failed AP BSSID from the FW.
Added a new vendor command event for sending roam events stats
attributes to userspace.
Change-Id: I7a08635a7912cbd940d90a2d62433296740ad913
CRs-Fixed: 3050799
Introduce a new vendor command QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS
that aims to configure/trigger the roam events from the driver.
Change-Id: Ifd9464cc8cb485890c8d171dc136d377f7a59fa1
CRs-Fixed: 3028404
If ppdu rssi unit is dbm, need convert to db for API:
qdf_nbuf_update_radiotap, only need convert once for first mdpu in the
ppdu. if convert for each mpdu, wrong rssi will be saved.
Change-Id: I85e92121ddb289e3513022ff092083825197efb4
CRs-Fixed: 3057041
2 threads blocked to wait channel_switch_complete_evt for SAP channel
switch is already in progress, qdf_event_set only woke up 1st thread
later, 2nd thread still kept blocked with hold net_dev for debug id
NET_DEV_HOLD_COUNTRY_CHANGE_UPDATE_SAP, leak happened.
Change-Id: Ib76318dd4a613ca1852a56b7701a04385b69ba56
CRs-Fixed: 3061976
Add API to get dp peer authorize state.
Also modify dp_tx_get_rbm_id_li to update rbm for IPA offload
scenario
Change-Id: I0f8cca4623a1c3b840f336aa6d67740951cb6700
enum wmi_channel_width has defined WMI_CHAN_WIDTH_160P160
and WMI_CHAN_WIDTH_320. Therefore add corresponding
definitions in enum wmi_host_channel_width, which is then
1-to-1 mapped to enum wmi_channel_width.
Change-Id: Iff5dc1f678874e1d15581a1ebbacc06c25d09699
CRs-Fixed: 3062062
From 5.11 kernel, nla_strlcpy() is renamed to nla_strscpy() since
it works more like strscpy() than strlcpy() after the enhancement.
Hence handle it accordingly in WLAN driver by creating wrapper API
wlan_cfg80211_nla_strscpy().
Change-Id: I4c5ca1738048605c842c827d1706353bc012fed8
CRs-fixed: 3060060
From 5.14 kernel, panic_notifier_list is moved from kernel.h to
panic_notifier.h, hence explicitly include the header file in
order to access panic_notifier_list.
Change-Id: Icf546ebea5a19b79602031b4fd92b498db0048c0
CRs-fixed: 3060060
Fix the second cfreq2 frequency returned by the service
API, wlan_get_320_center_freq, for a channel ranging
between 33 (6115MHz) to 61 (6225MHz).
CRs-Fixed: 3060832
Change-Id: I656a5d6633cfa48aaeff5f0ba53e4c6138f5d8f8
Handle announce timeout value that is received as a part of
the TWT setup command and provides it to the firmware through
the WMI_TWT_ADD_DIALOG_CMDID. If timeout value is non-zero
then firmware waits up to timeout value to use data frame as
announcement frame. If timeout value is 0 then firmware sends
explicit QoS NULL frame as announcement frame on SP start.
Change-Id: I682d1dc4e304042e4e9b8d6c6a73dc13fbbdccab
CRs-Fixed: 3053956
Adding a nbuf and nbuf->data prefetches in 2nd loop
of Lithium datapath RX improved UDP throughput by
about 250Mbps.
PINE default driver: 3189Mbps @ 100% core-3
PINE with prefetch: 3469Mbps @ 100% core-3
Note: PINE reo ring is mapped to core-3.
Change-Id: I7f166b52c3697facdce3954994755c9c1412c1f3
In certain cases the driver checks whether the peer is a assoc link
or non-assoc link, in case of legacy connection when mlo is disabled
return true for assoc link.
Change-Id: I50e6b22754ffb26fbb4b7892a962bc754479f7a8
CRs-Fixed: 3059278
Currently driver invokes regulatory callbacks after pdev create
and from reg cc event processing. In case of restart of the
driver because of SSR or idle restart, driver ignores the default
country and sets the user set country which was there before SSR
or idle shutdown. Now driver continues restart and creates pdev.
During pdev creation it propagates reg rules from psoc to pdev
which was there in psoc before shutdown and after pdev creation
it invokes the regulatory callbacks, as part of this hdd dynamic
callback is invoked and it tries to schedule the regulatory work.
Since idle restart is a vdev operation so driver is not able to
schedule the work as it does not get the dsc op and it waits for
500 ms to reschedule the work. In this 500ms time driver gets the
response of the set country command which was sent to fw to set
user country. This command also invokes the hdd dynamic callback
and regulatory work gets scheduled and scan channel list command
is sent to fw.
Now if any scan is going on in the FW and after 500ms if first
work gets rescheduled, it again sends the scan channel list to fw
which cancels the ongoing scan.
To address issue, add a change to not invoke regulatory callbacks
from pdev creation if user country set is pending.
Change-Id: I5686163644409ef19507c19ae31f7f1e7892931f
CRs-Fixed: 3054603
The current PN is a 128-bit field which was incorrectly
stored into a 64-bit variable, leading to stack corruption.
Fix this by increasing the size of the variable
for current PN to 128-bits.
Change-Id: Ib26cc0bb7d244360afb258a55d5b9a8ddd6aa4ca
CRs-Fixed: 3059345
Move basic IEEE 802.11 field definitions that are not specific to
cryptographic functionality, from a cryptography related header file
to a common header file for IEEE 802.11 definitions so that these can
be used by other 802.11 protocol processing modules. The crypto header
file already includes the common header file, so there is no effective
change in code visibility of the definitions for crypto code.
Change-Id: I439fe818a457cc7694fdb431f5d2c1a7552f2caa
CRs-Fixed: 3059572
Add stop timer flag to avoid resubmission of tx capture work queue timer
while del_tiimer_sync.
CRs-Fixed: 3056656
Change-Id: I72bfb6916f02297b15bb733359c0e4d7f91f0b73
When the AFC response has a disjoint set of CFIs and frequency range,
the ACS trigger is called even though the AFC master channel list is
empty.
Due to this, ACS happens even though the AP's destination power
mode is LPI.
To fix this issue, call ACS trigger only if the AFC master channel list
is non-empty.
Change-Id: I217d23827b34ac577649b82b278a203bf01fa1f6
CRs-Fixed: 3052805
Remove ifdef macro inside a function and move the mlo param
update to separate function.
Change-Id: I2037519fda00c17efcec3bab34340f27d58324c0
CRs-Fixed: 3058432
Deliver the oldest management frames to upper layers if
the management rx reorder list grows beyond the maximum
configured size.
Change-Id: Id0199849e26804310dd502051b8e14f56f0df795
CRs-Fixed: 3051431
Add definitions for size in octets for the following subfields in the
Common Info field of Basic variant Multi-Link element: BSS Parameters
Change Count, Medium Synchronization Delay Information, EML
Capabilities, and MLD Capabilities. These definitions are as per
IEEE802.11be D1.0 (but also happen to apply as of IEEE802.11be D1.2).
Change-Id: I36725292f29da1f03caed6baa5d25c02a06c2c4f
CRs-Fixed: 3057853
