Extend the encoder configuration to support aptx
adaptive R2.
Change-Id: I17d7adb62539d9f59222fd0c992424ba98395383
Signed-off-by: Zhou Song <zhous@codeaurora.org>
Add MI2S/TDM AFE senary port IDs for Kona target.
Change-Id: I8dafa4516c31040aad0bca30cfdc9acbdf460bf1
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Add check for mfc channel count before issuing mfc
media format command.
Change-Id: I0541d6651ecfcc90562ec0d9a632d039e34658cf
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
Add mixer control to configure multi channel map for
each backend separately.
Change-Id: Ie114fa38ee5ce47841cda4cd7f31349905f5c2c7
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Add support for speech codec which is similar to a2dp aptx adaptive.
Change-Id: Ibfbcf086f009fdb561e26aaf92cefc92f1bd16ca
Signed-off-by: Zhou Song <zhous@codeaurora.org>
Support group tdm multi lane configuration for TDM interface.
With valid lane mask tdm interface support delivery audio channels
through different data lines.
Change-Id: I63e8ba1106b89c6bcaca0a8359a1def696c334ad
Signed-off-by: Cong Tang <congt@codeaurora.org>
Implement get param for AFE_PARAM_ID_SP_RX_TMAX_XMAX_LOGGING
in order to get excursion params from DSP.
Change-Id: I5129938c51c6f6ede9d4703d13be60d04d26f5e3
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
With speaker protection in v-validation mode, speaker
samples can be tested in early factory mode. Add
support for v-validation feature from driver.
Change-Id: I92493d6d2784cf4dd58021746bffe01180f89d23
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add support to process ec at channel count other than the
playback channel count by providing ability to set downmixed
channel count and downmixing weights to be used to downmix
ec ref data obtained from playback path.
These configs would be used to explicitly configure MFC module
present in ec ref path, for usecases where ec processing cannot
be done at playback channel count due to algorithmic or resource
limitations.
Change-Id: Iaa80a0f0da3697c55751b2201578252d6466d3b5
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
Handle media format update events from ADSP in case of DSP loopback.
Change-Id: I4004759cc77a05f46106d359417f97f0326af19d
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Allow to mark entries in a channel map as unused to prevent mixing other
channels in that slot.
Change-Id: I06f7de932dec4d30b2d6cfe04460d07ddad89049
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Add support for Aptx Adaptive decoder. Introduce flag
to indicate ABR feedback decoder configuration to
differentiate from regular decoder configuration.
Change-Id: I272e0a9572a56e878f7ad1385514b3be7010145a
Signed-off-by: Chaithanya Krishna Bacharaju <chaithan@codeaurora.org>
FLUENCE_EF module in COPreP topology doesn't support
44.1Khz sample rate. Set sample rate to 16Khz for
VPM_TX_DM_FLUENCE_EF_COPP_TOPOLOGY, which contains
FLUENCE_EF module.
Change-Id: I527da1a70cacba1014b2a706216172d12066b909
Signed-off-by: kunleiz <kunleiz@codeaurora.org>
VA macro in Kona has three DMA TX ports. Add a new VA
DMA TX CPU DAI in the DSP DAI driver to use it on Kona.
Change-Id: Ic144dbed1bd63af6f0150f854fdb74d57e156839
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
BT sink devices have a limitation on the packet sizes
they can receive and handle from BT sources. AAC encoder
can produce output frames which can vary in size based on
content being encoded. If frame size exceeds MTU size of
BT sink device, it will lead to incorrect decoding of
frames in BT sink.
Add a frame configuration parameter (MTU/Peak bitrate)
for AAC encoder to solve this problem.
Change-Id: Ia7795049e982400b0b3657b0b3a8990fc6920e38
Signed-off-by: Aniket Kumar Lata <alata@codeaurora.org>
Add support to get DOA tracking monitor data.
This is required to support SVA LED display feature with
FFECNS/FFNS enabled.
Change-Id: I7e39c2f3998fcc3f9ed0767c0090f862e1ba7539
Signed-off-by: Chaithanya Krishna Bacharaju <chaithan@codeaurora.org>
Add dai driver and routing driver changes for
afe loopback BE. This BE is used to capture
EC reference data.
Change-Id: Ia57f335bde5f8a47de0030fbf1cdb784c8821e17
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Add support to enable mono mode when one TWS+ earbud is
connected. Change the encoder config when device switches from two
earbuds to single earbud.
CRs-Fixed: 2341876
Change-Id: I880aa6a2767d88e99be2d80afff0e5fbec94b8a4
Signed-off-by: Manisha Agarwal <maniagar@codeaurora.org>
Switch audio drivers to SPDX identifier on msm-4.19.
Change-Id: Ic3f0230a516db251b8d81e8a7e73dbc04d66fe1b
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Update SBC sample frequency and number of channels
from IPC library to set AFE port accordingly.
Change-Id: Ibca385b0fc0ba4c3122053559b1116bd4c31336d
Signed-off-by: Florian Pfister <fpfister@codeaurora.org>
Add different media format support in AFE decoder.
Change-Id: Icdc3884882c34236f5ab02355dfbabdd2a1becd2
Signed-off-by: Florian Pfister <fpfister@codeaurora.org>
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
SMECNS_V2 module in COPreP topology doesn't support
stereo input. Update channel number to mono for
VPM_TX_VOICE_SMECNS_V2_COPP_TOPOLOGY, which contains
SMECNS_V2 module.
Change-Id: I04b971b41328f6a32bf0ff42b21496b49bb4140b
Signed-off-by: Kunlei Zhang <kunleiz@codeaurora.org>
Add support for sending APTx Adaptive encoder mode,
High Quality or Low latency to LPASS.
CRs-Fixed: 2272343
Change-Id: Ibbe809d5ca4481d3e98931e40213dd16110f6a57
Signed-off-by: Sharad Sangle <assangle@codeaurora.org>
AFE supports now MI2S interfaces with up to 16 channels.
Add new APR API functions to support this.
Add support for senary PCM/MI2S ports.
Change-Id: I18d48eed4e9a0476363220e959a0f254aa292056
Signed-off-by: Dieter Luecking <dieterl@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
ABR encoder config parameters should be sent to DSP
only when ABR is enabled. Do not send these parameters
for fixed bitrate.
Change-Id: Icf7e4feef65d01c8ae3f6c6123d490cadef46c97
Signed-off-by: Aniket Kumar Lata <alata@codeaurora.org>
Add support for soundwire wakeup irq registration and event
notification from afe.
Change-Id: I97abe0a8bb571b997a52f90e0a0f57a26c714251
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
CDC DMA TX uses PACKED_16B format if speaker prot
is enabled. Add macro AFE_LINEAR_PCM_DATA_PACKED_16BIT
for proper value of format.
Change-Id: I1070e00d26a18c77e26ff2518ef4a1256a674e20
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
New codec dma interfaces have been introduced to connect
LPASS and Codec macros. This change is to add Rx and Tx
codec dma interface related updates to Q6 AFE native driver.
CRs-Fixed: 2281591
Change-Id: I2edbe904cd4c13801f06cdd7bd226a82db5d6d51
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Support two SPDIF input and two SPDIF output interfaces in AFE.
Support 61937 compressed capture.
Change-Id: Ie71434eb53be798567a6240e0f4bf171aee305b8
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Add support for new A2DP profile aptX adaptive.
This is just like any other A2DP profiles.
CRs-fixed: 2272343
Change-Id: I219dec038e84b7b98ebb2d5233ddf576c8bbe70a
Signed-off-by: Sharad Sangle <assangle@codeaurora.org>
Enhance APIs to get instance id and stage info from userspace,
required for multi-stage Voice Activation in ADSP.
Change-Id: Ie39a3d002a56fb8df0c241089a50d55ef700a538
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
Existing software supports only high AANC level with minimum noise.
Requirement is to support different noise levels when AANC is
enabled for better AANC effect.
Change-Id: I343d00473937f68eb86533e88b25083d554b79b1
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Update module id used in get/set for sound focus and source tracking.
CRs-Fixed: 2262638
Change-Id: Ieb35c12b8f6ec8a5db6f699f70bf85ef29b29178
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Add support to dynamically configure channel mixing weightage
coefficients for both ASM and LSM sessions.
Currently the code is executed only for LSM session and can be
extended to ASM as well.
Change-Id: I727ea6fa2d3a99bbf6811005c5733535f680891b
Signed-off-by: Chaithanya Krishna Bacharaju <chaithan@codeaurora.org>
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
With multichannel voice activation support in LSM, it could be possible
that the input media format/hw_params to LSM would be different than
the output media format/hw_params. This change decouples the input
and output hw_params for LSM. The output hw_params are obtained through
ALSA pcm_hw_params operation, whereas the input hw_params are obtained
though the LSM_SET_INPUT_HW_PARAMS ioctl to LSM.
At the same time, the below parameter IDs are added to send the channel
information to LSM service:
- LSM_PARAM_ID_MEDIA_FMT_V2
- LSM_PARAM_ID_LAB_OUTPUT_CHANNEL_CONFIG
Change-Id: Ie53a087b0ec54e83c4eba93a0828f9bdd6cc147d
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
Update to AFE native driver to send VAD calibration
to DSP. Add support for per service API version query
in q6core driver.
Change-Id: I6234879054e7b5622a40912da16072fd8dbd83fe
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
New codec dma interfaces have been introduced to connect LPASS and
Codec macros. This change is to add codec dma interface related
updates to Q6 AFE native driver.
Change-Id: Ia3d1e5e80c694c8c4a7f904151adfcb504964b08
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
