As the bss peer is closely tied with the vdev creation
and deletion, listeners might be uninitialized and result
race conditions. send an event only to the connected peers.
Change-Id: Ia0ae063c92bba38d2fb67fe4eae84f5562991fa2
CRs-Fixed: 3574176
Add INI to disable AST indication. AST disable flag will be
sent to the target in resource config.
Change-Id: If30cac010681faf06bbcaa2d492d6843e3e675d0
CRs-Fixed: 3544223
When the peer delete timer/vdev manager response timer expires, host checks
if the umac reset is in progress. If so, host will retrigger the timer.
It is possible that the umac reset is just completed and either of these
two timers got expired. In this case, host will assert saying that the peer
delete response/vdev manager response is not received from FW. FW may take
a few milliseconds to send the peer delete/vdev manager response to the
host after the umac recovery completes.
Hence, to avoid the crash, check if the umac reset was in progress during
the umac reset buffer window.
Add the below changes as well,
1) INI support to get the umac reset buffer window value.
2) Renamed the API dp_umac_reset_is_inprogress as
dp_get_umac_reset_in_progress_state to return either
CDP_UMAC_RESET_IN_PROGRESS or
CDP_UMAC_RESET_IN_PROGRESS_DURING_BUFFER_WINDOW.
Change-Id: Ie15ef0731bad4b0ed955a479f00e297b7ba10729
CRs-Fixed: 3522665
Currently connectivity logging is done for all opmode
but logging should be done only for STA mode.
So to fix the issue add check for opmode and skip
connectivity logging if opmode is not STA
Change-Id: Ie6175a02c8167f5ebfd81553837206640431f701
CRs-Fixed: 3515365
Add soc/pdev level cdp config params, so that these can be used
to get and set config context items.
Change-Id: I6cfeafb4333bf2f267121dce37b64f22cb86e98c
CRs-Fixed: 3502588
-Support to route IGMP packet to correct netdev coming from
legacy and mld sta.
-Support to detect mld model based on ini setting
Change-Id: I10ea5af9a4315642b262c8404d7bebd88ee06ab1
CRs-Fixed: 3467808
This reverts commit I2a697f91e572f88a36f96085d15c90c679deaf0c.
Original change was added to support manual ulofdma trigger but it
needs to be reverted here due to a small tweak in design approach.
New design to be integrated and hence reverting this one.
Change-Id: I4c358db48298666c753aa89166a31adbba067e36
CRs-Fixed: 3429084
Extract manual ulofdma trigger bit as part of rx ppdu stats per user
update process
Change-Id: I2a697f91e572f88a36f96085d15c90c679deaf0c
CRs-Fixed: 3418677
Add 160 MHz and 320 MHz BW support for Smart Antenna.
Peer connect gets rate codes for all supported BW on connecting peer
as part of wmi_peer_ratecode_list_event. This changes add 320 MHz and
160 MHz BW support.
Change-Id: I715dd5a64c38114fef6e17c2e2f6a526e1a716c2
CRs-Fixed: 3381648
1. Maintain and fetch PPEDS profile from be_soc instead of be_vdev
2. Enable WDS EXT mode for Direct Switch
3. Provide cdp API's and structures to interact with osif
layer to get PPEDS profile info
Change-Id: I997126e3b5ae85dabdcd6053115927122b8681da
CRs-Fixed: 3404778
Parse sequence type and msduq htt tlv and
update mode count and avg rate based on txmode.
CRs-Fixed: 3380939
Change-Id: I5fe2068cbe8b312738eeaa4c4a48000e1a66255c
waikiki supports sending a packet from REO2PPE if a flow
rule matches. these changes are added to take advantage of
this HW feature when ever we are adding a flow rule
CRs-Fixed: 3359141
Change-Id: I8fedfcc759bc0427d71d3bb615e61ba38577c5c0
1.Add check in Tx completion path to handle
mcast packets from all ML partner vdevs
2.Handle cases where a ML mcast vdev can be
deleted and started as NON-ML vdev and
viceversa by adding reset ML mcast conf.
3.Optimized Register configurations for Mcast
at Init/Delete and Start/Stop AP
Change-Id: Iab8a5a081e2e0377509574d362754d32c5b83df2
CRs-Fixed: 3350350
Add support for GET MLO Multicast API to check
if the vdev is primary multicast vdev.
Enhanced SET MLO Multicast API to reset primary
multicast flag for all partner vdevs.
Change-Id: Ic88949ce922bb1d0fd34349058d254de0d1f563c
CRs-Fixed: 3322523
The following change introduced a misspelling of "disable", so fix it.
- Change-Id Ifeb6935e2309be1f974c4da30b33a5caca308569
qcacmn: Add dp ini param for sawf stats
Change-Id: I46249a0a32eabf3198d2634a4775c05089647b1b
CRs-Fixed: 3319332
Add control frame stats accounting support.
Accumulate both per peer BAR and NDPA counts in Tx and Rx per PPDU stats
path. Accumulate per peer RTS success and failure count only in per PPDU
Tx stats path.
Change-Id: I78fb3546cd831559e208a7330feb2eb67b9a28de
CRs-Fixed: 3313435
Add support for:-
1. PPE VP entry attach and detach.
2. Per VAP PRI2TID Support
3. Dump the PPE VP HW entries.
4. Add tx completion handling for ppeds descriptors
Change-Id: I2a6d0be5bb556663a39a24d17b703877f3b5ad00
CRs-Fixed: 3276981
Add cfg command to enable umac reset skeleton debug, which
when enabled will skip post reset procedure handling.
Change-Id: Ieca393e6292660bb3ada40408fd6e71ac78d0a1f
CRs-Fixed: 3296960
Multiple instances of the misspelling "recevied" are present, so
replace them with the correct spelling "received."
Change-Id: Ibd7f4a136541be8aa98f5bee4db7f75af0271f53
CRs-Fixed: 3273526
Add framework to use different RX hash values and ring masks
for ML and non-ML peers
Change-Id: I098cb50b8873eb137ce096011d01a5c21aaf854f
CRs-Fixed: 3269916
This is a new FAST TX API which avoids various checks.
This API will be called when SFE tags a pkt as fast_forwarded
and vap's fast_tx flag is set.
avoid additional re-checks in the wifi TX function
CRs-Fixed: 3218650
Change-Id: Iba17ede59652a1ff2af553f57de21dc58946298e
Based on traffic end indication marked packet coming
from network stack, send indication packet to fw via
exception path to terminate ongoing SP.
Change-Id: Ia2be60d485be4b05665cf6b1684af9258417ffb1
CRs-Fixed: 3207392
