simple Alloc is being used in RX path which avoids
certain debug logic. during free of nbuf we should
avoid this debug logic else it will report it as
double free, this will be triggered only when debug
is enabled
Change-Id: Iadb40071fb733cc4de3291784df5075d5a099a8e
In dp_mlo_get_soc_ref_by_chip_id API add null check
for ml_ctxt
Also correct intraBSS code for mlo disabled cases
Change-Id: I25eb07e9ccd714ba819730c765dc07b00dd15482
Multicast support for MLO
1. Following functions are newly added.
dp_rx_igmp_handler()
dp_tx_mlo_mcast_handler_be()
dp_rx_mlo_mcast_handler_be()
dp_mlo_get_mcast_primary_vdev()
Change-Id: If215f843369e6e2621ef302b924e524c86f0d30b
Use chip ID and destination peer to determine the target soc
and partner vdev for Intra-BSS in MLO case.
Change-Id: I709c52e74426c5e81b50c8063cad7669c0e7002d
Following peer stats are updated in per packet Rx path:
to_stack
multicast
broadcast
In BE architecture, HW provides the support for basic vdev stats and
hence per packet stats updation of above parameters can be done only
when enhanced stats is enabled or HW vdev offload stats is disabled.
Avoiding per packet stats updation reduces CPU load and improves KPI.
Change-Id: Id7c11c025a8464951b615a7f7b006ce61db487fc
CRs-Fixed: 3067843
Rx patch changes for multichip MLO
1. Create ini for rx ring mask for each chip
2. Configure hash based routing for each chip based
on lmac_peer_id_msb
3. Peer setup changes to configure lmac_peer_id_msb
to enable hash based routing
4. Rx Replenish changes to provide buffers back to owner
SOC of reo ring
Change-Id: Ibbe6e81f9e62d88d9bb289a082dd14b4362252c4
Changes to have HW cookie conversion context per
desc pool.
This context will be used to program CMEM of the
other SOC in case multi-chip MLO.
Change-Id: I5ec68813e8fcb6d124698a52f5553acf9a7b1795
For DA MC/BC RX frame, host should not use da_idx to access soc->ast_table
as this da_idx is not valid, OB accessing might happen.
Change-Id: I5c78d869e32536effe2635e561cb6881cdc97c38
CRs-Fixed: 3072841
For T-put test case, if near_full IRQ is fired, ring_near_full
flag will be set and host will always reap reo2sw ring as much
as possible, but if quota 0, this will lead to dead loop
in dp_rx_process_be.
stop reaping reo2sw ring if quota is 0 even ring_near_full is set.
Change-Id: Ifea885162be3ccc6ae0515fc3c2538c459372887
CRs-Fixed: 3067231
Avoid using ast_entry in intra_bss handling, instead use
da_peer_id directly from the msdu_metadata
Change-Id: Ic586f297e8e393504d7d399cff7a67c3035aa11f
sw_exception bit will be marked in reo dest ring descriptor for
FW re-injected frame, get this bit and save it in skb->cb,
this bit value can be used for FISA further check.
there is no reo_dest_indication field in reo dest ring on beryllium,
so share same cb member for sw_exception and reo_dest_indication.
Change-Id: I2321121be7dda68ed19faca177d868c7e8ba1dbf
CRs-Fixed: 3056156
Take care of the MLO peer bit indication to be
concatenated with peer_id to access the peer map
object.
Change-Id: Ia603a728101e83829a8906d1b847f42389e78ca6
CRs-Fixed: 3039326
wds in Beryllium is managed by hardware.
Make use of hardware managedwds and disable
the corresponding wds handling done in host
for Beryllium.
Change-Id: I39f23cb40c6c5f85ada8ce59c92ff2855bb18da3
In Beryllium the HW does the ast lookup and match
and sets the intra-bss bit in the msdu_desc_info
structure of reo_destination ring and WBM Rx release ring.
So, change the Beryllium code to make use of this
hardware assistance for intra-bss.
Change-Id: Ic7c89efc741fefe35603082309204fbe3c9a97c7
Currently, rx packet capture events processing happens even
when feature is disabled by ini. This incurs per packet overhead
in rx path.
The fix is to move all the processing from rx path to packet capture mode
component. Send only wdi event from rx path, when feature is enabled by
ini.
Change-Id: I647256b85117cd3373950c78a5a0ae7d6710e4e2
CRs-Fixed: 2969123
Allow all raw frames to the upper layer without checking
for port authorisation. All checks in raw mode has to be performed
by the controller in case of raw mode.
Change-Id: Ica6df24b359790fcadc9bb7bbb4d7b5084930170
Add number of page desc check for TX/RX desc_pool de-initialization,
avoid unexpected assert in case SPT page_desc_list is not
initialized like SSR case.
Change-Id: I970f0e09a0631260e1cb0d1de23a1de3e8d13f24
CRs-Fixed: 2991334
The existing assertions for unmapped variable in
rx descriptor results in an undesired bug_on since
the unmapped value is 0 for active descriptors.
The fix is to modify this assertion so that bug_on will
be triggered only if the unmapped value is 1 in rx
desc.
Change-Id: I03b27e0e42ce3c42b9fa148da9258063b0209b08
CRs-Fixed: 2985248
(1)naming change in HW CC related function
(2)refinement for cookie ID generation regardless of
SPT page address 4k aligned or not
(3)move CMEM size check under cookie conversion macro
Change-Id: Ib32d802f5512e5facfa4130826406943fb3d27f1
CRs-Fixed: 2977304
Add the handlers to process the near-full irqs for
the rx, tx_completion, wbm_error and reo_status rings.
Change-Id: Ia5a2abb6d66a96e8dcb5c651d24769382db0d666
CRs-Fixed: 2965081
Implement core DP rx processing to functions in to corresponding
architecture specific be/li rx files. Keep common utility functions
in DP common files.
Change-Id: I40083e10772fd2b6ce2f1fa9e197f2ad92d0522a
CRs-Fixed: 2891021
