Adding support to parse stream of HTT TLV's recieved as response
to the HTT EXT stats request message
Change-Id: I44c990a1ed91c2381b89811de33c0717bd24be7d
CRs-Fixed: 1114641
Window size needs to be incremented by 1 since fw needs to
represent a value of 256 using just 8 bits.
Change-Id: I18cdb6fb928f28893dc0e1fd2fb574a12ca53972
CRs-Fixed: 2025197
This change is for supporting monitor mode VAP. All the monitor mode ring
is configured. The related monitor mode ring includes:
-monitor mode buffer ring
-monitor mode destination ring
-monitor mode status ring
-monitor mode link descriptor ring
The packet is not sent to monitor mode ring unless the monitor mode VAP is
configured. This release support Multiple VAP - AP/STA VAP plus Monitor
VAP configuration. The status ring is not used in this release. However,
the ring is tested and the ring is moving and there are TLV's in the ring.
Change-Id: I782ee0c3b998d8b3bbac79b5e7fdecdbff15fa93
CRs-Fixed: 2013049
pkts should be forwarded from one STA to another
STA belonging to same VAP from within the driver
Change-Id: I68eb0dd91f7ac54352b4882ffdb9d5d53d627db1
Conflicts:
dp/wifi3.0/dp_rx.c
dp/wifi3.0/dp_types.h
Conflicts:
dp/wifi3.0/dp_rx.c
Change-Id: I68eb0dd91f7ac54352b4882ffdb9d5d53d627db1
Setup all TID queues during rx peer init
Add support to handle ADDBA HTT msg
Allow pkts to be fwd to stack even if peer isn't found
Change-Id: Icdfec2eeaa3e0ca62202ed278cd63209b8f79cb2
CRs-Fixed: 2016138
Firmware expects the following:
- mac id for the refill ring configuration should be 0 (soc)
- mac id for the rx dma rings should be 1, 2 (mac 0 and mac 1)
Change-Id: I23c652e2e1f8e2fca69647906321e4d867a42609
CRs-Fixed: 2003050
Since dp_htt_h2t_send_complete() is only accessed from within
dp_htt.c, and since there is not a public prototype, make it static.
Change-Id: I002ac20d0e5ced8ddc9d5099a987a5ce208b4cfc
CRs-Fixed: 1108111
Currently some of the public functions in dp_peer.c do not have their
prototypes exposed in a header file. In addition clients of these
functions currently have local prototypes. Fix these issues by adding
the prototypes to dp_peer.h.
Change-Id: I461cf69024da56fad57b75a325775ecd68872c8e
CRs-Fixed: 1108085
Wifi 3.0 compile against cdp apis.
Make compilable against mobile code base.
selective hw common header include.
Change-Id: I051f917001c0d13c762d9cb5a3ec141cd278d0e7
CRs-fixed: 1075736
Add support for replenishing the rx buffers using the host to
firmware buffer ring.
This includes adding a flag QCA_HOST2FW_RXBUF_RING:
When QCA_HOST2FW_RXBUF_RING is enabled the host will do the following:
- Allocate the refill buffer ring (HTT_HOST1_TO_FW_RXBUF_RING) and
populate it with
rx buffers
- Send the refill buffer ring configuration to the firmware
- Allocate the rx DMA ring (HTT_RXDMA_HOST_BUF_RING), leave it empty.
- Send the rx DMA ring configuration to the firmware
When QCA_HOST2FW_RXBUF_RING is disabled, the host will do the following:
- Allocate the rx DMA ring (HTT_RXDMA_HOST_BUF_RING), and populate it with
rx buffers
- Send the rx DMA ring configuration to the firmware
CRs-Fixed: 1074199
Change-Id: Iec05a973cd9d628c742e3aaa16b8dabc7797625d
