An INI dp_tx_spl_device_limit is defined and can be used to configure the
limit of TX descriptors that can reserved on the SOC to handle
special frames like EAPOL.
CRs-Fixed: 3343207
Change-Id: Ic84a11249880a3541749a72ac6d60df548f2bc5c
An INI dp_tx_spl_desc is defined and can be used to configure the
limit of TX descriptors that can reserved on the pdev to handle
special frames like EAPOL.
CRs-Fixed: 3343209
Change-Id: I6578bddd1f4ea07528c9f66f778b113ec6fb9e61
1. Change the names of parameters and functions related
to direct switch feature from ppe to ppeds
2. Remove the unused ppe_release_ring
Change-Id: I5a95b1273e338f354903af98158578ac65758a8a
CRs-Fixed: 3345097
The kernel-doc script identified a multitude of documentation issues
in the wlan_cfg folder, so fix them.
Change-Id: Id6bfb397608de6b858e448a867a3c21dffc9a178
CRs-Fixed: 3352408
Enable and register PPE2TCL and REO2PPE ring interrupts
for direct switch
Set interrupt timer threshold for ppe2tcl ring as 30 us.
Change-Id: Ida1ff6c3c2000f16f07960f7eae0d10edc337dc0
CRs-Fixed: 3341790
To support MLO on 4 chips, update the maximum number of chips that
can participate in MLO to 4.
CRs-Fixed: 3314581
Change-Id: I93a253b4e54f7e4e19ea8407facfb69e6347d192
Add ini configuration to disable invalid decap type handling
during rx mon tlv processing. This is a temporary change for
debugging purpose and will be removed once HW issue is resolved.
Change-Id: I75eb53170833224ddd144baf1b1d8034f988dd3c
CRs-Fixed: 3308998
Add ini param "dp_disable_rx_buf_low_threshold" to disable
low threshold interrupts on regular rx refill ring. Default
it is enabled.
Change-Id: Ie471a4dc6862cbfe8b1eafe7c7d2ce2e0a7fcb7a
CRs-Fixed: 3313885
Update the prealloc size for RXDMA_BUF and REO_DST
rings using the ini values which have been configured.
Change-Id: Id47fbca3a79b37bba902d1b5bd0bf8c6073648cc
CRs-Fixed: 3283986
add debug prints and a custom timer for how long to wait to receive next
bk pressure event message.
Change-Id: I5a736b0f134cd179990de536da02967db3e39774
CRs-Fixed: 3273427
Add framework to use different RX hash values and ring masks
for ML and non-ML peers
Change-Id: I098cb50b8873eb137ce096011d01a5c21aaf854f
CRs-Fixed: 3269916
At 802.11BE 320 MHz throughputs, flow collision and
the resultant flow eviction can lead to throughput
degradation. Skid length is a parameter which can be
used to reduce these continuous flow eviction from the
FISA flow table.
Increase the FISA flow table skid length to 16 to reduce
the chances of flow eviction from FISA flow table.
Change-Id: I3badcb364d45b19a8a266fe335df320c30f999ae
CRs-Fixed: 3232508
With KIWI_V2, wbm_ring_num for WBM2SW5 and WBM2SW6 have been changed
to 5 and 6. Hence properly update them in g_tcl_wbm_map_array. At the
same time, tx_ring_mask_msi and tx_ring_near_full_irq_mask are also
updated.
With IPA_OFFLOAD enabled soc->tcl_data_ring[0|1|2] is used by HOST
and the other two rings are allocated to IPA usage.
Change-Id: I4c13d0787e46be667c3a5a0ae624df8c2b2b354e
CRs-Fixed: 3229375
UMAC HW reset feature will be using the last interrupt context in each
DP interrupt combination i.e., on a system with more than 8 MSIs for DP,
UMAC HW reset will be assigned a dedicated interrupt context.
Add the necessary support for the same.
CRs-Fixed: 3163900
Change-Id: I26abd01e4261661ed95e1aa3cb2a774e78b50d9f
Enable bits in WMI_INIT command to let the FW know about host's
capability to support notify frame feature. If the feature is enabled,
host can mark certain TX frames as "notify frames" for hardware and they
need not be sent to FW. FW depends on this capability exchange to decide
whether to install HW rules for frames to be sent to HW.
Change-Id: I7158e79ae0fbdc73a2f4096ae1577337e8291246
CRs-Fixed: 3209399
NAPI scale factor should be configured based on the board
type. for example Hawkeye could have a different scale factor
compared to Alder.
CRs-Fixed: 3212330
Change-Id: Ie0bad6aade9ca9379997aa974154f9fb903ab93e
Add ini support to configure TC ingress filter priority
value which would be used for TC based dynamic GRO.
Change-Id: I1742f4539353939e3a40ff4096b3f833f2029b12
CRs-Fixed: 3206817
Currently, data stall detection is without control over
individual data stall events.
INI variable, gEnableDataStallDetection is converted from
boolean to unsigned int which provides control over events
across FW and host with each bit corresponding to different
data stall events.
Bit 0: Enable all data stall events if set.
Bit 1-30: mapped to data stall events. Used when Bit 0 is 0
Bit 31: Enable aggressive timeout for WLM Mode.
Change-Id: I4656520accd1589e77d5054eaa0a3cb8e63b14b2
CRs-Fixed: 3174906
Enable the 4th Tx. completion ring to save CPU load
Initialization and interrupt handling for 4th completion ring
is done here.
Change-Id: I2db27218a3c3e14d719d012f03454a6a7aa647fe
User can specify a limit and frames are dropped when the memory
used by packets in the queues goes beyond the limit. This is a
SoC level param.
Change-Id: Id2bd9caaa11d9ea9f9e04c635ff629190bb62916
Add the PPE Tx HAL data structures. Also add
dummy functions for reo2ppe and ppe2tcl rings
intializations.
Change-Id: I31fa61a728535c32ea3678407da8ae39f0d9f48d
For WCN7850, the first mac (i.e.. MAC0) is capable of
2G/5G and 6G data transfer. Hence initialize and use
only on RXDMA monitor status ring.
Change-Id: Idb6e23a887a9ed32a52dd54765e5ed3c6a12df06
CRs-Fixed: 3094138
WCN7850 has only one RXDMA DST ring, as opposed to other
lithium family chipsets, which had 2 RXDMA DST ring.
Refactor the code to pick the number of rxdma destination
rings from CFG context.
Change-Id: I20d475c02690043e969bc7a78605809b8c6814ae
CRs-Fixed: 3084440
Use chip ID and destination peer to determine the target soc
and partner vdev for Intra-BSS in MLO case.
Change-Id: I709c52e74426c5e81b50c8063cad7669c0e7002d
Offsets used by host for HTT stats are not aligned as per the
structure declaration given in file htt.h .
Make change to use the correct offsets to get the correct stats.
Also make change for byte count computation.
Also make cleanup changes for FR65817.
Change-Id: I8bc6164cc4994c49536d7277779f25b258be1592
CRs-Fixed: 3082742
Add configuration at SOC level for hw vdev stats in BE architecture.
Following config parameters are added:
vdev_stats_hw_offload: option to enable/disable hw vdev stats
hw_vdev_stats_timer: timer duration for hw vdev stats
Change-Id: I8cbd2b6a7378d8a9e7de920a3a6fdff0cf7785fe
CRs-Fixed: 3067843
In case of WIN hal_soc will be freed in wifi down
path, this pointer is not valid at pdev_detach or
soc_detach.
Change to populate dmac source ring flag to dp_soc
as access is needed at pdev_detach or soc_detach
Change-Id: I628746bdd05ba3791d3d0e6b6dfdf160ed368e9a
Rx patch changes for multichip MLO
1. Create ini for rx ring mask for each chip
2. Configure hash based routing for each chip based
on lmac_peer_id_msb
3. Peer setup changes to configure lmac_peer_id_msb
to enable hash based routing
4. Rx Replenish changes to provide buffers back to owner
SOC of reo ring
Change-Id: Ibbe6e81f9e62d88d9bb289a082dd14b4362252c4
This force use BA64 ini config is no longer needed, because another
gRxAggregationSize can do the same settings and more flexible.
Change is used to remove this config.
Change-Id: Ie780489849f8b701481a628a9bca2b4112460bd8
CRs-Fixed: 3076982
Dynamic GRO feature is enabled by default and aimed for specific
customers. Add an ini control to allow other customers to config
this feature enable/disable.
Change-Id: I7f505599327ac131b3cdac9b4d9e038861b1aeb6
CRs-Fixed: 3074689
This change includes below
1) Changes needed to increase Tx rings to 4
2) Use WBM2SW4 ring for rx error in QCN9224
3) memset srng at alloc to avoid populating RBM_id
in per packet path and enable implicit RBM
Change-Id: Icbd5ac2378273b8f3c6adc41c611e29551fff22f
Currently the IRQ mask for tx completion near full
interrupt is not in sync with the tx completion rings
which are enabled for WCN7850.
Fix the mask for tx completion near full interrupt.
Change-Id: I1432191b260094060873406d48e04fde5b7bc35e
CRs-Fixed: 3052650
Currently, rx packet capture events processing happens even
when feature is disabled by ini. This incurs per packet overhead
in rx path.
The fix is to move all the processing from rx path to packet capture mode
component. Send only wdi event from rx path, when feature is enabled by
ini.
Change-Id: I647256b85117cd3373950c78a5a0ae7d6710e4e2
CRs-Fixed: 2969123
