Extract the blanking status from Spectral reports and upload
it to user space via SAMP message.
CRs-Fixed: 3413925
Change-Id: Ib033b88190be6bca3dff903cf279a9883821fb10
There is a possibility of Spectral being stopped by user
while a report is being processed, this can lead to the data
structures becoming invalid leading to an error.
Guard API target_if_consume_spectral_report_gen3 with
spectral_lock to avoid this, and allow Spectral scan to stop
only when the ongoing report has been processed.
Change-Id: I617f66e3c5b45323f8c88e9e5e173b139a8a9241
CRs-Fixed: 3376179
Add input_punc_bitmap to struct ch_params.
Add input puncture bitmap to regualtory channel search APIs.
The non-SP channels will be punctured by ACS module so that AP
can come up in highest possible BW in Standard Power mode
with the given primary frequency. These punctured channels are not
validated (whether supported in the given power mode of operation) by
the regulatory.
CRs-Fixed: 3278013
Change-Id: I56b0495be902fd92fc6da26e1007d60f930ba687
1.This change fixes the use of uninitialized
variable in host driver.
2.Adds NULL check for num_psocs in mlo_peer_calculate_avg_rssi to
avoid undefined behaviour.
Change-Id: Ifbfef42b5930dfe15736a75a74e81155c5f1fbce
CRs-Fixed: 3297794
In the case of finite Spectral scan, the spectral scan will be stopped in
the target once the requested count of spectral reports got generated.
The Host will not be notified of this stop scan. To synchronize the Host
data structures in accordance with the target, we explicitly stop the scan
once the last report is received. In the current implementation, the
stop_scan() is called at the beginning of the last report processing and
we continue processing the last report. As part of the last report
processing, we could access the data structures that were reset during
the stop_scan(). To fix this, stop the spectral scan at the end of the
last report processing.
Change-Id: Iecfa4e72ccbedae77ee2a57e9283910e980121d5
CRs-Fixed: 3287136
Add the following stats.
- Number of Spectral events received from the target
- Number of consume_spectral_report() invocations
- Number of fill_samp_msg() invocations
- Number of SAMP messages that are ready to be sent to the user-space
- Number of SAMP messages queued to the user-space
Change-Id: I53fda4b309620043a77bc2bc87573941d7fb0bcb
CRs-Fixed: 3156151
Use CONFIG_REG_ 6G_PWR_MODE for the new API.
Use "_for_pwrmode" as suffix for the new functions.
Change-Id: I9b84944a59062277b76bc48877c47ea5afada0ec
CRs-Fixed: 3133023
The consumers of the current channel list may want to search through 6G
channels that are not part of current channel list and belong to channel
list of different power mode.
Therefore, replace the regulatory current channel list with that of 6G
power based channel list.
Change-Id: Ie2ff8bbfb50a5f95f584b134b18246cb28b1c406
CRs-Fixed: 3110987
While copying FFT bins from the target, Spectral Host driver reads
one DWORD (32-bits) at a time and extracts FFT bins out of those DWORDs.
This extraction uses standard bit shift and mask operations as below.
#define QDF_GET_BITS(_val, _index, _num_bits) \
(((_val) >> (_index)) & ((1 << (_num_bits)) - 1))
For a chipset that uses pack mode 0 i.e., packs 1 FFT bin per DWORD,
_num_bits in the above operation will be 32. So, we try to left shift the
integer constant '1' by 32. If the integer constant is represented by
32-bit integer, we could have issues in the result of shift operation.
As per C standard, the result of shifting an operand by a count greater
than or equal to width (in bits) of the operand is undefined.
This is because some platforms could optimize the shift operation by
masking the shift count to 5 bits. That means, the shift actually
performed is 32 & 31, which is 0.
Fix this by using 64-bit integer constant '1' in the above operation.
Change-Id: Ic7fe4de7917f3069d78a2ff29d86009cbf381e3f
CRs-Fixed: 3125158
For reports modes 0 and 1, the number of FFT bins in a detector will be 0.
We calculate end_bin_idx as start_bin_idx + num_bins - 1.
When start_bin_idx is 0 for these report modes, end_bin_idx will be -1.
Since bin indices are unsigned integers, end_bin_idx becomes a very big
value and we will try to copy unintended large number of bytes.
Fix this by forcing end_bin_idx to start_bin_idx when num_bins is 0.
Change-Id: I11e5dd673fc95a1ce3823ef977fd70c34a4ec67e
CRs-Fixed: 3096955
Each FFT bin value is represented as an 8 bit integer
in SAMP message. But depending on the configuration,
the FFT bin value reported by HW might exceed 8 bits.
Clamp the FFT bin value between the min and max value
which can be represented by 8 bits. For linear mode,
min and max FFT bin value which can be represented by
8 bit is 0 and U8_MAX respectively. For dBm mode, min
and max FFT bin value which can be represented by 8 bit
is S8_MIN and S8_MAX respectively.
CRs-Fixed: 3056458
Change-Id: I9ec75f781a130d3ed0d0d9393975fd5874961ce0
Pass report parameters to FFT bin byte swap function instead of
FFT bin length adjustment WAR.
Change-Id: I02a280bc4e8e0839c894a70258e1f16a784c08a6
CRs-Fixed: 3051559
FW sends Spectral scan detector info TLV in WMI_PDEV_SSCAN_FW_PARAM
event to indicate the information of a detector participating in a sscan
session. FW sends one TLV of this type for each detector participating
in a spectral scan session. Add support to process the TLV and update
the spectral host data structures accordingly.
CRs-Fixed: 3044193
Change-Id: Ie17b6ea9336ada7a00e4594fa2f7f49ef3d443e5
FW sends Spectral scan chan info TLV in WMI_PDEV_SSCAN_FW_PARAM_EVENTID
event to indicate the channel information for a spectral scan session.
Add support to process the TLV and update the spectral host data structures
accordingly.
CRs-Fixed: 3044162
Change-Id: Ibbf7f6bbbb267123bbdf44bcfffa2cfb1c2926df
On Beryllium architecture, PHY DMA applies a 32-bit byte swap to assist
in efficient Host reads when connected to a big-endian Host.
This is done to avoid byte swapping at the Host.
So, if the Host reads this data 32-bit word at a time, the byte order
would be intact. Report headers are not a problem because as they are
composed of 32-bit words. For FFT bins, read each DWORD at a time and
extract FFT bins out of that DWORD. Make this change in a generic way to
keep the design uniform across different chipsets and endian modes.
CRs-Fixed: 3042188
Change-Id: Idff1ac7eb5e18c692c9ee8b19b9ae9e6b962d486
Initialize the variable "segid" to prevent the usage of junk value.
Dont dereference the spectral-lmac object if the same is NULL.
Change-Id: I5206a99017f77e5c94368d91171a7eb05745933c
Add locks for detector list, per-session report info
and per-session detector map, to avoid inconsistent
concurrent accesses.
Using spin_lock_bh for locking between Process and
Tasklet context.
CRs-Fixed: 2983801
Change-Id: If709fd91f193072f07b9dae19bf48e6da2d369d3
Move the left band and right band edge extra bins to
the end of the Spectral bin_pwr array.
CRs-Fixed: 3002177
Change-Id: Iea93879763a7e2c56cdb5f4d3d163e2d4b082b26
In target_if_process_phyerr_gen2(), initialize variables
to prevent usage of junk values.
In target_if_process_sfft_report_gen3(), add check to
ensure the index doesn't exceed the size of the array.
Change-Id: Ie738d1fc836e1a2ec1358b635a4b6c64a424b894
Different chipsets are reporting cfreq1 and cfreq2 in different formats in
Spectral reports. This leads to confusion at the user-interface level.
Convert the cfreq1 and cfreq2 representations as follows before sending the
Spectral report to upper layers.
For a contiguous channel, cfreq1 will represent the center of the entire
span and cfreq2 will be 0. For a discontiguous channel like 80p80, cfreq1
will represent the center of the first segment whereas cfreq2 will
represent the center of the second segment.
CRs-Fixed: 3020790
Change-Id: I86e330c9a3a66701f274e20db2d8bc5934608a6b
The host can receive some spectral samples even after stopping the scan
as there could be some samples already sitting in the WMI event pipe.
Drop those frames in the driver itself.
CRs-Fixed: 3014336
Change-Id: I8aece67b46aa84e974b538f40ffcb937c855f5a3
Use lb_edge_bins->start_bin_idx as the bin_pwr array start bin
index, when left band edge extra bins are present.
In all other cases, use the detector start bin index
detector_info->start_bin_idx.
CRs-Fixed: 3005949
Change-Id: Ic91c3eb386d693b3f929c687e269e882b6bd8f59
The per-session detector map is keyed by detector ID
from the Spectral FFT report and is only valid for one
session, ie. start scan to stop scan.
There is a possibility of receiving FFT report with
an invalid detector ID, for a particular session.
Due to this, invalid detector map information may get
accessed.
Verify that detector ID received in Spectral report is
valid for given spectral scan mode and channel width,
by checking the detector list.
Add a validity flag to the per_session_det_map, and check
whether detector map is valid for the detector ID used to
access it.
CRs-Fixed: 2998410
Change-Id: I1f38ae22b458bb1fea62b99422ec60095071b3c6
Modify APIs target_if_dbg_print_samp_msg() and
target_if_dbg_print_samp_param() to use the
new formats for spectral_samp_msg and
target_if_samp_msg_params, respectively.
CRs-Fixed: 2961953
Change-Id: Ib0776c2189e9ca1dc33d38f2a7609aa6d15959ee
Add a new API free_samp_msg_skb(), to free
SAMP msg buffer, if error in phyerr processing
for 160/80p80 MHz modes. Call this API from
reset_160mhz_delivery_state_machine(), to
avoid redundancy.
CRs-Fixed: 2961987
Change-Id: I3a0488997e474fef6f4f57e3fbfd1a163c91ac7b
Add API target_if_spectral_populate_samp_params_gen2() to
populate fields in target_if_samp_msg_params, using
search fft report and target_if_spectral_rfqual_info
fields.
CRs-Fixed: 2961986
Change-Id: Iad970483f6183d2e52d97e6c3ddf8f146845fbe4
Add API target_if_spectral_populate_samp_params_gen3() to
populate fields in target_if_samp_msg_params, using
Spectral report, search fft report and spectral scan
summary report.
CRs-Fixed: 2945300
Change-Id: Idce57af9a198773491f6c6bc7303641ec0fb15a7
Add API target_if_spectral_get_start_end_freq to set
start and end frequencies in the per-session
detector level map, based on spectral scan
cfreq1/cfreq2 and operating BW.
API target_if_populate_detector_start_end_freqs handles
population of the start and end frequencies per-detector,
in a session.
CRs-Fixed: 2961957
Change-Id: I68a052db6643d92c22e7ee671f4e46af33c2fa08
Replace numerical values with macros, for indicating
position and size of Spectral FFT report fields, in
target_if_consume_sfft_report_gen3().
Change-Id: I81994ebb0d642bc4cbebe2b24aabcae567ae6a9c
CRs-Fixed: 2945319
Modify prev_tstamp variable in target_if_spectral
structure to an array and index it based on detector ID.
Also, modify target_if_spectral_verify_ts() to include
detector_id parameter and compare current timestamp with previously
received sample on per-detector level, to check discrepancy.
Change-Id: I9f6382909ac0661323db54f160f1350cb8bd8153
CRs-Fixed: 2945318
Add API to fill FFT bin start and end indices to the
detector map, depending on the values of cfreq1 and cfreq2.
This is to handle samples where the frequency of
Detector 0 is greater than that of Detector 1.
Fill the start and end indices for bins such that
the bin_pwr array is in increasing order of
frequencies but the order of detectors same as
that sent by the HW.
Add API target_if_update_session_info_from_report_ctx(),
to populate the per-session information in the
consume report context. This includes population of
start and end bin indices on per-detector level,
start and end frequencies on per-detector level
and cfreq1/cfreq2 on per-report level,
Change-Id: I044c6961e5f710089b0192876e8717f9127b497f
CRs-Fixed: 2945315
Find the last_raw_timestamp and adjusted_timestamp
as part of the FFT report processing API.
Change-Id: Ibc7fd524ca897ead3b4b8ca25ba6e6487154305d
CRs-Fixed: 2945307
Refactor target_if_consume_spectral_report_gen3()
and divide the functionality into individual
functions.
This will be under OPTIMIZED_SAMP_MESSAGE flag, which
is unset by default for all profiles, till
development is complete.
Change-Id: I07e753dcaff6e81dfc8739df4e691d871c921581
CRs-Fixed: 2945171
A state machine checks if spectral reports are
in order for gen3 spectral 160/80p80. Currently,
this state machine has four states.
Modify this state machine to have only two states and
change associated APIs accordingly.
Change-Id: I754758fdf0529394c63fe371f54db79d52459999
CRs-Fixed: 2945161
Modify the API to include Validation and
processing of Spectral search FFT report.
This will be under OPTIMIZED_SAMP_MESSAGE flag, which
is unset by default for all profiles, till
development is complete.
Change-Id: I250867e2c002f491f51a36416ea9ca5ae0bc5508
CRs-Fixed: 2945132
Modify target_if_consume_sscan_summary_report_gen3() to
include validation and processing of Spectral summary
report.
This will be under OPTIMIZED_SAMP_MESSAGE flag, which
is unset by default for all profiles, till
development is complete.
Change-Id: Ice88b8e74ed714515f21b9b232aa0088fbb54d1d
CRs-Fixed: 2945124
Sometimes firmware sends spectral events repeatedly with
wrong vdev. This causes continuous error logs are
written to kmsg.
Replace info prints in target_if_consume_spectral_report_gen3()
with debug level prints.
Change-Id: I2ca4be7d0d13e841a6dbd4efbc02ecd2b12893f8
CRs-Fixed: 2926759
target_if_dump_fft_report_gen3() function doesn't check if the FFT report
is present in the Spectral report. Add the report mode 0 check to avoid
printing FFT report when it is not there.
Change-Id: Ia825cd7927ec7ffa41473649d381c717b0ef26c9
CRs-Fixed: 2898904
Reset the 160 MHz state machine on any error
while processing a Spectral report.
CRs-fixed: 2879610
Change-Id: I982d12edc5c9aa24b0255fbcb932d198a6da514b
Following fields in the Spectral FFT report have been modified in the HW
in the version 2 of the Spectral report, reflect the same at the Host.
- fft_radar_check
- fft_peak_sidx
- fft_chn_idx
- fft_base_pwr_db
- fft_total_gain_db
CRs-Fixed: 2855909
Change-Id: I8dd190cae8da260d1fb639342ca980285bfd3d0e
WLAN chip components are little-endian based. When such a chip is attached
to a big-endian Host platform, there will be a mismatch in the order of
bytes for the data that is transferred between the Host and target.
Spectral HW module transfers the Spectral report directly to the Host DDR.
This transfer doesn't go through any byte-order conversion at the HW side.
So, to avoid invalid reads at the Host side on a big-endian platform,
convert the Spectral report to the Host byte-order before using it.
Change-Id: I742537f3a95ffca2e12b83535e83e2870ad06b10
CRs-Fixed: 2838371
FFT bin is 10-bit wide in Spectral pack-modes 0 and 1. However, HW packs
just one FFT bin in a 32-bit DWORD by adding extra padding bits in
pack-mode 0. Currently, the Host reads the entire 32-bit DWORD to figure
out the FFT bin value. Instead, read the only useful bytes i.e.,
least significant 2 bytes of a DWORD. This approach is efficient,
especially on a Host that implements a byte-swap mechanism on FFT bins on
a big-endian Host.
Also, while dumping FFT bins for debug purpose, print the first 2 bytes of
an FFT bin in pack-modes 0 and 1.
Change-Id: I20ca8c4905671e80251dca07f80ce17801b98f5c
CRs-Fixed: 2831530
In Pine 160/165 MHz following are the expected sequence of events.
1. Start scan WMI command
2. FW param WMI event
3. Direct DMA completion WMI events
If 3 and 2 happens in the reverse order (i.e., host receives a direct
DMA completion event before receiving a FW param WMI event), host assert
will be triggered.
This change removes the assert and drops the Spectral reports till
FW param WMI event is received.
CRs-Fixed: 2812403
Change-Id: I537d0077737baab8d3a8e90bdc4f9138690010bc
When user programs a non-zero scan count(say N), after receiving N
samples Spectral scan is supposed to be stopped. This change keeps track
of number of Spectral reports received from target and stops the
Spectral scan when programmed number of samples arrives at host.
CRS-Fixed: 2764935
Change-Id: Ibea0eeece4577fd6e0da302716869b05c900f917
The 2nd argument passed to the function is_primaryseg_expected
is used to index the array spectral->rparams.fragmentation_160 which
is of size 2.If the value of the argument is greater than or equal
to 2, the indexing will lead to array-out-of-bounds access.
The fix is adding the relevant validation check.
Change-Id: Iccf98b06c0546ad11ec67e93e14183214100107f
