This change disables the border color on the layer mixer,
based on the caller's request. This is required to totally
disconnect the layer mixer hardware when it is not
participating in blending the pixels. Having empty blendstage
but border color enabled, allows Layer mixer hw to produce
border pixels even when blend stage is empty.
Change-Id: I8e84aeedffbd42ad793a167a6cc5a3a653864c1a
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Add smmu cache hint at during the msm gem prime import
to ensure memory is cacheable. Ensure sys cache feature
is added to all sspp, not just vig.
Change-Id: Icc10468ad8d3e7c6aabd437776cde99eb627375a
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Setup blendstages is done per LM but FETCH_PIPE_ACTIVE is per CTL.
Overloading mixer blendstage setup with fetch pipe logic can lead
to HW programming errors. Refactor the logic for setting
FETCH_PIPE_ACTIVE by adding a new op that allows caller to provide
a bitmask of all pipes required to be active on this CTL. This new
logic includes support for:
- 4LM use-cases, staging pipes for all LMs within a CRTC
- Demura fetch-pipe without need for tracking via active_cfg (removed)
Also, lower the cyclomatic complexity in setup_blendstages by moving
the logic for obtaining the mixer config settings in to a helper
function.
Change-Id: I2907b359ffad5734be5b06f44919b5ddb1ef3f7c
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Store full or partial static image in system cache (L3 cache)
for video mode primary display. Added additional commit to
crtc commit thread to transition to read cache state.
The change also updates llcc APIs to support generic functionality.
Change-Id: I6b2a45da946d7e0e0b326da9d214be3f01a9420e
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Some of the features in the DPU hardware needs planes to be staged but
it should not be blended in the layer mixer. Change adds support for drm
driver client to set the blend type on the plane and updates driver code
to skip staging the plane.
Change-Id: I1e8c7f6ce5617820ea8b24419e0d4d27b481819b
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Add support to stage layer with zorder 0 as base
layer and stage borderfill only during null commit.
Change-Id: I54356c1b7834227cc3da00c211e71ac5816ce51a
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Using individual flush functions for each active hw blk
is not scable-able for future use. Clean up the ops to merge
all flush functions into one and manage HW block id
with same API.
Change-Id: I62afbc51fa7d345b3a1f5721e5e09661a4215f7a
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Defines should always have a single space between #define and
the keyword to allow for searching where these definitions are
located using grep.
Change-Id: I38778e789b12df8a7a22c22dd27152a5ab047405
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Add support to configure the DPU pipeline to support VDC-m
topologies.
Change-Id: Ib8ce9a0eaeaa838759fb09cb2ee164d4765e4989
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
This change adds support for dsc using the 3d mux hw block.
The 3d_mux hw block merges the input from layer mixer before passing to
dsc block for compression.
Change-Id: I21544c33fff2c1e604c0ae712a036a127d25afcf
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Certain sub-blocks need to be enabled disabled dynamically on a
seemless mode switch (for ex. partial update) CWB is another example
where control path interface configuration needs to be dynamically
changed on enable/disable of concurrent writeback. Similarly
3d mux needs to be enabled/disabled for partial update use cases.
This change modfies the current api update_cwb_cfg and makes it
more generic and adds support to enable/disable only the 3d mux.
Change-Id: I5e5a6e78b0599f689cb2f83d0d626a5f392eff6e
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
This change introduces new ctl path api read_active_status to check
if a particular hw block is active or not in the current control path.
This is specially required in continuous splash use case when bootloader
has programmed certain blocks and the kernel driver tries to find
out the same configuration. This is used to ascertain which DSC block
is active in continuous splash case since DSC blocks are not tied to
mixer blocks.
Change-Id: I8dd590aa2dc764bd340727c166e1133ef9ce7af5
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
SDE HW from lahaina has moved the DSPP flush bits from CTL_FLUSH
to new CTL_DSPP_x_FLUSH registers. This change brings in
support for programming the new DSPP flush registers which
allow more fine-grained control over what sub-blocks within
each DSPP get flushed.
Change-Id: Ie16c9b153d607bd7627ba02480813ab588bbe2ea
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
New required programming in CTL. Fetch active informs the HW
of the active fetch pipes. Group ID informs HW of which VM owns
that CTL. Force this group ID to default/disabled until
virtualization support is enabled in SW.
Change-Id: Id9d68ae725a640893a4e347b69ad2b506a998f25
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
While disabling merge3d block, pending flush mask
needs to be set for merge3d.
Change-Id: Ic7baea278ac62ac1203aad8a33c40874704c85a1
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
CWB, DP and WB displays tear down sequence must reset
3d_merge, ctl, pingpong_binding, etc. MDP HW
blocks. This change fixes the tear down
sequence register programming. It also moves flush
sw reset before encoder_disable call. That allows
CWB tear down to update the flush configuration
on primary ctl path.
Change-Id: I21c521b39456af4144cf836c65d46a25c985f51d
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
This snapshot ports changes from 4.14 to 4.19 into
the msm and sde layer. Snapshot was taken as of
commit 0f8fb25421ff ("cnss2: Add device version to
SOC info structure").
Change-Id: I59b799a78319c2db6930a2a10bc38976f8c09898
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Get controller scheduler status at each vsync to verify
pending frame status.
Change-Id: I01401a57b68828294299977a7be7e796d07c7472
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
This change brings msm display driver including sde,
dp, dsi, rotator, dsi pll and dp pll from base 4.19 kernel
project. It is first source code snapshot from base kernel project.
Change-Id: Iec864c064ce5ea04e170f24414c728684002f284
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
