It is not applicable for all DFPS cases to update UIDLE state
according to current frame rate. If DFPS changes frame rate
through vertical front porch values, the SDE clocks and transfer
time will not get changed accordingly, and it always get fixed
at max frame rate configuration of DFPS.
Add this change to check max FPS of DFPS instead of current
frame rate for UIDLE update, if DFPS is enabled with VFP.
Change-Id: I7634bce6a9eb1af212ba19a267735be08b20ae1f
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
Added sysfs entry on crtc to notify a retire frame event
which indicates start of new frame. It is added at same
time of signaling retire fence.
Change-Id: Ie60aae96bd6e6bfb3cfe9db482cb59053f22383f
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
All sde crtc's are virtual when they are created. Resources for the crtc
is allocated when crtc is enabled. All crtc's will not have same
capabilities because some of the dspp blocks have additional hardware
blocks. Change exposes additional dspp capabilities dynamically when
crtc is allocated the dspp hardware block.
Change-Id: I93e76a1335574e4ca30d9419ef6cc6e8149e2c3c
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
In current SDE driver when misr is enabled, for each commit in
encoder kickoff stage misr is configured for both lm and interface
misr blks. This can clear misr data before client could collect misr.
This change avoids misr data clear and configures misr based on
user input.
Change-Id: I85fc19c78afc6d01346219250c82f2ada824eb0d
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Add a CRTC property to request the VM to acquire/release
HW resources.
Display driver in trusted VM boots up without HW ownership. Set
the default value of the property as RELEASED to handle resource
assignments.
Change-Id: Iea651a2fea902d95d4b954052af4ef016af15a91
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
In some cases like suspend and cwb concurrencies,
the number of mixers in the sde_crtc structure
can become zero. Add support to get the number
of mixers from topology in those cases to
avoid incorrect resource allocation request.
Change-Id: Id9b82e805ff50a107ad06514b4e41c0917abdf33
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Increase the maximum number of mixers per crtc to 4 to
support 4LM use case. This change also increases the number
of data path to 4 to support 4LM in continuous splash handoff.
Change-Id: I4655017dcb405fad69513bebb8fd7f848fc5873d
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
When a 4LM topology is used each plane attached to a CRTC
is tagged with a L/R layout value and an offset value
depending on where destination X coordinate lands on the display.
The layout information is used to determine SSPP to LM
pair mapping and local coordinate space.
This change also handles source-split and Z-order
validation checks for planes staged on different mixer
pairs.
Change-Id: I1b20223388e65fc36a8b379ad9df23a277fcd1a5
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Setup blendstages is done per LM but FETCH_PIPE_ACTIVE is per CTL.
Overloading mixer blendstage setup with fetch pipe logic can lead
to HW programming errors. Refactor the logic for setting
FETCH_PIPE_ACTIVE by adding a new op that allows caller to provide
a bitmask of all pipes required to be active on this CTL. This new
logic includes support for:
- 4LM use-cases, staging pipes for all LMs within a CRTC
- Demura fetch-pipe without need for tracking via active_cfg (removed)
Also, lower the cyclomatic complexity in setup_blendstages by moving
the logic for obtaining the mixer config settings in to a helper
function.
Change-Id: I2907b359ffad5734be5b06f44919b5ddb1ef3f7c
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Store full or partial static image in system cache (L3 cache)
for video mode primary display. Added additional commit to
crtc commit thread to transition to read cache state.
The change also updates llcc APIs to support generic functionality.
Change-Id: I6b2a45da946d7e0e0b326da9d214be3f01a9420e
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
This change updates plane's dirty flag with QoS
value to ensure QoS gets reprogrammed with new FPS
settings. This is required as QoS values will change
with FPS.
Change-Id: I377b99da2a640d375bd48477f149197b332e7f7b
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Dim layer clearing/setup requires reading registers in order to update
value, doing this add additional CPU processing when it's not really
needed. Add logic to only do the updates only when needed.
Bug: 142504774
Change-Id: I23bcbe39575de35c387cfb7d2b9dc993525e4f98
Signed-off-by: Adrian Salido <salidoa@google.com>
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Current computation of line time does not include compression ratio
from either DSC or VDC. This change stores source bpp and target bpp in
sde_crtc during sde encoder mode set to be used while calculating line
time.
Change-Id: Ib1e045dce17fcf006447d4562b402cc3f214ed8c
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Some of the features in the DPU hardware needs planes to be staged but
it should not be blended in the layer mixer. Change adds support for drm
driver client to set the blend type on the plane and updates driver code
to skip staging the plane.
Change-Id: I1e8c7f6ce5617820ea8b24419e0d4d27b481819b
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
This change fixes feature specific partial update checks in
atomic check by enabling partial update specific features only if
respective core feature is enabled.
Change-Id: If3678a52fa0f8d9e1d714a662601e5628e1637d2
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
Reset MDP ctl path and DSI ctl on autorefresh
disable failure. This will enable the hardware
to recover from the hang.
Change-Id: Ia9acc8573c22e0713179ef4f6ef604caacabfadb
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add partial update handling for color processing features.
This will validate and set cp features for each frame if
applicable.
Change-Id: Id78c1f4ecbd74781c0c03c04efb528d6a8b91264
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
This change moves the DSC implementation into a separate file.
This is required to add support for new compression algorithms.
This cleanup change also, moves struct sde_encoder_virt
declaration to the encoder header file.
Change-Id: Idc3b96e65fcce2a7ee6e17af604cec0cb574f6f7
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Allow Qsync and VRR features to be supported independently
by display driver. Restrict the feature availability in
same composition cycle.
Change-Id: I696eb72a2b4f9451e142ffdc5acccc8987c36b6d
Signed-off-by: Kalyan Thota <kalyant@codeaurora.org>
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
During the validation of inline-rotator downscale ratio,
in the plane atomic_check phase, the client_type is
derived from the crtc->state. This leads to wrong
client_type as in check phase, it has to be derived
from the new crtc state. Fix it to derive from
new crtc, which would in turn be used to get the
correct inline-rotator downscale ratio.
Change-Id: I109fc6fd81182b1cda1c4feefbf421d3fab433c7
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
CRTC client type is wrongly identified as RT_CLIENT
for WB as the API considers only RT and RT_RSC. Resolve
it by adding a new API to check for RT CTRC.
Change-Id: I1f216f60a18215426e594d0f8b09852af376799d
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Currently the display driver does not consider the write back
client while deriving client type for QOS settings.
Add new API to consider the write back and other non
real time clients also for picking up the proper QOS settings.
This patch also fixes the QOS setting mismatch with QSEEDLITE
hardware.
Change-Id: I5db3d21921b8930bb6399ea355d3ce2b60e51430
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
Userspace is not supposed to request vblank until crtc is enabled,
because drm framework rejects the request if crtc is not enabled.
Any vblank request prior to that need to be cached in the userspace.
Hence removing the cache logic from the downstream driver.
Change-Id: I78ceee331cba2d691f68fd649bd5cf33f7868e72
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
This snapshot ports changes from 4.14 to 4.19 into
the msm and sde layer. Snapshot was taken as of
commit 0f8fb25421ff ("cnss2: Add device version to
SOC info structure").
Change-Id: I59b799a78319c2db6930a2a10bc38976f8c09898
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Userspace is not supposed to request vblank until crtc is enabled,
because drm framework rejects the request if crtc is not enabled.
Any vblank request prior to that need to be cached in the userspace.
Hence removing the cache logic from the downstream driver.
Change-Id: I5383e39075377e3e49b8d335598ddfa48ab54666
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
Add runtime_pm ops support in drm driver instead
of direct sde_power_resource_enable/disable call.
It allows drm driver to use runtime pm refcount logic
to track the resources instead of custom implementation.
The change also removes the NRT_CLIENT support from
sde_power_handle code to simplify it further.
Change-Id: Ib14692dca5876703d0a230da2512d731b69b8ebb
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
This change brings msm display driver including sde,
dp, dsi, rotator, dsi pll and dp pll from base 4.19 kernel
project. It is first source code snapshot from base kernel project.
Change-Id: Iec864c064ce5ea04e170f24414c728684002f284
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
