Move the ppdu_user_desc assignments in all tx capture
before peer checks. FW sends the peer_id which is not
valid in host, so this check is needed to not
miss the sequence number in this scenario.
Change-Id: I24305ae8f8f1964157ca61b8687fe72e76cde5ca
CRs-Fixed: 2626247
if peer delayed ba is true then value of preamble will be eventually
overwritten by previous frame (HE) and would give wrong values when
shown in pcap for radiotap fields. phy_mode is set to preamble value to
hold it and later on set it to mpdu_info preamble.
Change-Id: I054d27064b9ad151130fcbc1684594308352cef4
Do a logical split of dp_soc_attach and
dp_pdev_attach into Allocation and initialization
and dp_soc_detach and dp_pdev_detach into
de-initialization and free routines
Change-Id: I23bdca0ca86db42a4d0b2554cd60d99bb207a647
For HTT messages (no matter they are test commands or not) which do not
have FW responses, tag them for runtime PM feature so that corresponding
usage count will be decrement right after sending them through HTC to
avoid usage count mismatch. Tag the missing ones in this change.
Change-Id: I3f78d21a5a490db6dff0dd2786d87c3ced66180c
CRs-fixed: 2672301
Validate number of wds entries deleted during peer unmap
handling with the number which firmware has sent in
peer unmap message, which indicates the number of
wds ast entries deleted by firmware after peer delete.
Change-Id: I09e1c41bab19cd023e7a83baf1e90d51aab4229e
CRs-fixed: 2667445
If tx capture, sniffer are not enabled, mgmt nbuf is freed.
It is causing use-after-free in bpr enabled case
Added change to free only when bpr is disabled
Change-Id: Ia56254ca371cd9fbc21f5d58fac7ea96792d0bee
CRs-Fixed: 2663098
Is some cases, FW wants to adjust BA session parameters
FW sends a HTT event and HOST helps to send out DELBA
and modify BA win size in the next round of ADDBA req/resp
exchange to reduce following RX AMPDU aggr-size
Change-Id: I97777ff59a18346f2cd4e2e562c8ae6acdcd69d7
CRs-Fixed: 2644641
For ACK completion, update ba_size, ba_bitmap, ba_seqno
only if these are not updated earlier.
This fix updates ba_size, ba_bitmap, ba_seqno for QOS TID frames
in ACK completion handler, if these are not updated earlier.
CRs-Fixed: 2650482
Change-Id: I1d5f4bdb29a3d5194cd4a1544b39d6aa42903b1b
Add mutex protection while freeing pkts in HTC misc list to prevent
double unmap of netbuf.
Change-Id: I5c52324e382f8047037ca1d1a50367bc6052b737
CRs-Fixed: 2646771
Add following changes:
a. Add CDP API to config full monitor mode
b. HTT configuration changes
c. Init/Deinit changes for full monitor mode resources
CRs-Fixed: 2632442
Change-Id: I06db5194031b3ea0f0c1e5deda20df4bc0faa0b9
If tx_capture is disabled, the frames notified to tx_capture
module needs to be freed.
This change frees mgmt frames in tx capture module, if the feature
is disabled
Change-Id: I5f9ced69246c2b712d76f2f3cc61b5c386b703ec
CRs-Fixed: 2644025
In tx capture feature, the last retry packet has wrong rate.
This is because the peer is invalid at the time rate TLV is processed
for retries.
Change-Id: I0eb9a8c80f8ea0dde60fe819c7e667293630a379
CRs-Fixed: 2633669
pdev_id is being initialized with 0. Since 0 is valid pdev_id, though
pdev is not present for that id, it is being accessed.
Initialized pdev_id to 0xFF by default. Added checks on API to
detect valid pdev_id value corresponding to lmac_id
Change-Id: I2b2a38783615494ccc08e265702815f7e562214b
This change fixes issue with EAPOL frames in Tx capture
EAPOL frames completions are received with ACK completion.
For ACK completion, ba_size, ba_bitmap, ba_seqno are not updated earlier.
it was leading to dropping the frames in driver.
This fix updates ba_size, ba_bitmap, ba_seqno for QOS TID frames in ACK
completion handler
Change-Id: I58308a13c1b6addb95f424aa7ad45fe64e93b532
CRs-Fixed: 2620890
Move dp monitor inline APIs to header file from dp_rx_mon_dest.c
to dp_rx_mon.h to use it in component dev
CRs-Fixed: 2626054
Change-Id: I3a31dacd7d7e817f144708f9bda5536808080864
Sometimes ack ba status tlv comes twice which cause ppdu desc to be hold
as waiting for some more tlv as mpdu ack ba tlv is not matching with
completion common tlv mpdu count.
Change-Id: Id946ecd53018ee7abe93aa6c5f62e69d41b750e8
Add doppler and spatial reuse in ppdu descriptor to be able to use it on
HE information for tx capture
Change-Id: Id87a692a89d00c64929624c22c2efc27bc873e43
Currently mesh mode uses channel numbering which is derived
from APIs that don't support 6GHz channels numbering due to the
overloading of 6GHz channels with 2.4GHz and 5GHz.
Add support to obtain the correct channel number (and auxiliary
information like band and frequency) through the new APIs that
support 6GHz.
Change-Id: Ib0b39ebae2a22bd6b2b5d17b9058c3c2100e0d59
CRs-Fixed: 2605229
For Disassoc frame, fw send ppdu stats to host with peer_id
of the previous associated client. peer id is valid and peer
structure is NULL making framectrl as zero for disassoc frame.
with the fix frame ctrl are populated before checking for invalid peer.
Change-Id: I5960685a4c90f00a850f4f1fa2b3d883117fb443
In case of nbuf map failure as part of htc_send_pkt for
tx credit flow disabled endpoints, htc pkt is not put
back in the freelist as return status is not checked
resulting in memory leak.
Fix is to put the htc pkt back in the freelist based on
status returned by htc_send_pkt.
Change-Id: I9173fa3684bc887a360b92d48b689c53a5ad5dbe
CRs-Fixed: 2596297
FSE setup, FSE cache flush and FISA config commands do not have
response, tag them as HTC_TX_PACKET_TAG_RUNTIME_PUT so that get on
runtime_pm is released. Without this target fails to go to runtime_pm
suspend.
Change-Id: Ibb14484dd50c62bb4680b41acf93ce3da1bec796
CRs-Fixed: 2606884
Lithium HW can parse each MSDU when packets are enqueued to transmit
classifier and each MSDU can get enqueued to different MSDU-Queue.
By default, there are 2 queues per TID – UDP and NON-UDP. Based on
the flow parsing, packets will be queued to either of them.
Enterprise customers uses RAW mode frames which transmit classifier
would not be able to identify L4 protocol for UDP or NON-UDP queue
for encrypted frames.
Customer can also have different application based packets which needs
to be enqueued to differently prioritized queues. They can choose to
tag each MSDU based on application DPI and derive the flow priority
as below –
• UDP
• NON-UDP
• HI-PRIO
• LOW-PRIO
Customer needs API support from host which will provide an ast-index
based on a particular flow id given peer mac address. Based on the mac
address, host will find the associated peer and return the ast_index &
cache set number corresponding to the flow id from peer flow based ast
entry table. Customer will then program this ast-index and ast override
in transmit classifier CMD ring to enqueue MSDU to a specific
flow-queuein TQM.
Host API:
Input parameter – uint8_t *peer mac address, uint8_t flow id
Output – uint16_t ast_index
Change-Id: I79557c31532514ad5ec0c1848827a3e5cd91cdf2
1. Move all LMAC rings to SOC from pDEV
2. Dynamically obtain lmac->pdev mapping while handling LMAC interrupts
Change-Id: Ib017d49243405b62fc34099c01a2b898b25341d0
Change cmn_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I5716a87cad56b1dfe8dd56f193bbb6ff923a6af1
as we are overriding bar ppdu information, we need bar start/end
timestamp and duration.
added resp_type, mprot_type, rts_success and rts_failure in
cdp completion user.
Change-Id: I53c215e948fad8d079e1d4c40ec07d34aff1fefe
remove multiple update of tid for same ppdu stats.
tid is populated from user rate, completion common and
ack ba status tlv. As tid from ack ba status tlv comes wrong
for non-qos tid. we remove the tid populate in ack ba status tlv.
Change-Id: Ia8b0004fc329bf0fecc1a622e199635034c213a7
expected tlv bitmap can't be guaranteed as different ppdu frame has
different expected tlv bitmap. Check last tlv before sending stats
as tlv are coming from firmware in sequential order.
retry counter is not populate correctly, only successful
completion ppdu status get update
Change-Id: Ia4b71371bbf38996df9dbb67746078d5fbd628a1
Correct the debug message to print the appropriate
ring id when backpressure events are reported
Change-Id: I4cb2af9c802469ecd0c38bdd3789439048de876f
CRs-Fixed: 2556208
Remove pdev and vdev control path handles from data path.
Instead send pdev_id and vdev_id along with opaque soc
handle in ol_if_ops.
Change-Id: I6ee083f07e464f283da0d70ada70a4e10e18e1b2
rem_stats keeps counter of remaining stats to be processed.
At present this counter is of type uint8_t and hence can
accumulate till 256 counter but num_stats is of type uint32_t.
Hence if remainting stats to be precessed is 256 then rem_stats
value will be 0 as it will only consider LSB 8 BITS and it will
result in stats mismatch and hence memory leak.
Increasing size to uint64_t to accumulate more counter size.
Change-Id: Ifa86c7e4a73a5a700e9033c8756e986d86025cf9
Sequence number should be obtained from user_compln_ack_ba_stats_tlv
in HTT PPDU stats messages since enq_bitmap TLVs are not sent for
non-QOS frames.
Change-Id: I2d5ddb8c7397953081df94f77f0bd8a30a581b11
Pass pdev to dp_peer_stats_notify API instead of de-referencing
this from peer structure.
Change-Id: I5dc679283f5822f44b4140aefb3aee44a826c720
CRs-Fixed: 2500647
Adds new INI variable for threshold control.
Host sends message to target with new threshold info.
If buffer reaches threshold then MAC drops incoming monitor frames.
Change-Id: Id659d7df68a5ec0b22fb571dc1ffa4990f8fcc4f
Process smart antenna fields from tlv
HTT_PPDU_STATS_USR_COMPLTN_COMMON_TLV in tx
completion path and export it to tx_completion.
Change-Id: If14e711b0aee8e583fd329f3c3915904649ffe47
CRs-Fixed: 2491429
