It is required to send vdev-param HEOP to the target with
updated bss-color to enable HE BSS Color feature. Add
necessary code to support this.
Change-Id: I826bc5387dad8d044abcbc9cbdf69e93b59beb39
CRs-fixed: 2126605
Currently there is no support for management MGMT TXRX
component over HTT endpoint and supports only over WMI.
As a result for platforms which does not support MGMT
over WMI will break other components which uses MGMT TXRX
component to send mgmt packets.
In this change implement changes to support MGMT TXRX
component over HTT.
Change-Id: I487aca3893aa21905a744e2e5dc7104e6c414fdc
CRs-Fixed: 2097694
Both the unified DHCP offload struct dhcp_offload_info_params and all
of the function prototypes use "camelCase" which is frowned upon by
the Linux Coding Style. Replace the camelCase.
Change-Id: I3f2ce74bc150668b96b1946ef7b2d556c23dad94
CRs-Fixed: 2121485
Add cmn support for the following:
- Update ERP info in RSO Start
- Update HLP info in a new command WMI_PDEV_UPDATE_FILS_HLP_PKT_CMDID
- Set/Delete PMK cache info with WMI_PDEV_UPDATE_PMK_CACHE_CMDID
- Process FILS TLV in Roam Synch Indication and update the FILS info
[seq number,PMK, KEK, realm] to Supplicant.
Change-Id: I239bf5d6c4455d39181e335dbf73bcade16aee8e
CRs-Fixed: 2089128
Add support to send BSS scoring params from INI to firmware.
Firmware will use these params to select best candidate during
roaming.
Change-Id: Iad0e71c770ac4f4c31ce3b19552f09fd27dc37bf
CRs-Fixed: 2121739
Currently, we do not have support for 'he_ltf' command. But we need
this command for certain IOP testcases. Add support for 'he_ltf'
command.
Change-Id: I296b18762aaa52da80a5755c5bcca8dbd12d9b13
CRs-fixed: 2118948
Initialize pdev_id for PDEV stats request and response event.
Add param to set pdev stats request timer.
Change-Id: I11f648070cd39f026129d1cf3aa13bf296d25e6e
Add functions to send bridge MAC programmed from user
space to firmware.This change is part of a workaround
to fix an looping issue which resulted in wrongly adding
bridge's own MAC address to fw WDS table.Send MAC address
to target to avoid adding our own bridge address to fw
WDS table as part of source port learning.
Change-Id: I815d3c3f106cd2f528ac9172712ec6c2f47f4410
CRs-Fixed: 2070956
During host invoked roaming, set
WMI_ROAM_INVOKE_FLAG_NO_NULL_FRAME_TO_AP
flag so that FW will not send NULL data frame while doing transition.
CRs-Fixed: 2046964
Change-Id: I043c3d2431e4da5af36fb710bd36a520550abbd3
Extended service bitmap is used by FW to indicate supported services
bitmap for services excedding the current limitation of 128. Add support
to save and use this bitmap to check services supported in FW. Also,
change exisiting services bitmap to be dynamic allocated buffer to
optimize the buffer used to save the bitmap.
Change-Id: I24a0321bc1a06ee3aedf1c6acbc379e907bbd464
CRs-Fixed: 2103617
Add new Bad RSSI threshold offset for 2G to 5G roam and flags
to roam_offload_scan_rssi_params and fill them in the WMI cmd TLV
to pass it to the firmware.
Change-Id: I78876f5104e67280b1342ec0957d0162edbaf502
CRs-Fixed: 2105894
Fill the roaming parameters wmi_roam_bg_scan_roaming_param and
send them to firmware to be consumed for the background roaming
at bad RSSI
Change-Id: I08786141d28f8459aad27aaf53816ec4cdec7f08
CRs-Fixed: 2082906
D1.4 defines Supported HE-MCS and NSS Set (under HE-cap)
differently from its earlier versions in D1.0/D1.3.
Make code changes to bring in these new changes.
Change-Id: I4a482e48c071bbbe02c7f33645b7fe80870482d9
CRs-fixed: 2100674
Add support to fetch min and max tx power from target for
a given set of mcs, nss, chainmask, bw, and other rate flags.
Change-Id: Iafe082db81503a52bdc704d4b71d86d23788fddb
CRs-Fixed: 2061802
Add required WMI commands to communicate support of
EXT NSS Signaling between host and FW. Also, if
EXT NSS Signaling is supported the use new WMI to
communicate the required information between host and FW.
Change-Id: If3e1ef11a55f8fbdffddb3b10963878a6a2ca415
CRs-Fixed: 2089043
In WMI/WMA, data from event buffer from FW is used without
sanity checks for upper limit in multiple places. This might
lead to a potential integer overflow further leading to buffer
corruption
Add upper bound checks for max limit of event buffer (1536)
in all affected places to prevent the potential integer
overflow
Change-Id: Ic9194a27c4a4c63fc68ff7fc61165a53e66ca4f4
CRs-Fixed: 2095545
qcacld-2.0 to qcacmn propagation
Add support to include only selective IEs in probe requests in
order to improve user's privacy.
Change-Id: I59cf4181f60f5b4cd87a32fbcf29160d87ca59c8
CRs-Fixed: 1105495
FW implementation is updated to add more fields in chan info event.
Update host implementation to extract these fields.
Change-Id: I4935f3aa1c2e87d27a13a29651db8d8835cb4f91
CRs-Fixed: 2090787
Add a field ldpc_rx_enabled to vdev start parameters so that
this information can be propagated from the upper layers to
WMI and further to firmware.
Change-Id: I25fd148f77d86eb646a0e40fef6ac99c4fbcdf22
CRs-Fixed: 2023893
qcacld-2.0 to qcacmn propagation
Randomize probe request's source address and sequence number to
improve user's privacy.
Change-Id: I265f15476f1a23a268f159a44b6a3e4243fb9068
CRs-Fixed: 1105081
Add support for rssi based assoc rejection from a bssid and
Try to connect to this bssid only after time interval indicated in
Assoc reject or when rssi has improved by margin indicated in Assoc
reject.
On connection send OCE rssi reject BSSID list to firmware so that
firmware will avoid connecting to these BSSID until RSSI improve or
delta interval has elapsed.
Change-Id: Ic14f85894a4a2f47bcdde9ce977c7b92aeaf8fce
CRs-Fixed: 2076654
HT cap bit map is different for tlv and non-tlv based firmware.
Convert target cap to host cap bitmap to abstract out the differences.
Change-Id: Ia803efa3a895c7faa159d8051277d2a926b365a5
Populate tx params tlv that includes information related to power,
chainmask, bandwidth mask, preamble type, frame type etc to the mgmt
and offchan tx WMI fixed param
Currently, we send the command with TX params valid set to zero always
and hence target does not look for the TX param TLV. This change
implements API to populate TX params TLV that facilitates configuration
of parameters per TX frame be it data or management frame
If the TX params valid is set to false, target decides the values
to use for each of the mentioned TX parameters
Change-Id: I90a1b5e1c9bf0a54a907876ed3629c2d627b3c98
CRs-Fixed: 2070454
The length of buffer used to send wmi roam scan filter cmd is not
properly calculated and thus the length is less than the actual data
to be copied.
Fix it by properly calculating the length of the buffer.
Change-Id: I6a3baa5ca5560d2d04f9bd41a709a37abc1b95a9
CRs-Fixed: 2072057
Firmware now supports PMK caching in addition to OKC
(Opportunistic Key Caching). Use additional bit flags to enable
PMK caching in PMK configuration in roam offload scan request.
CRs-Fixed: 2004963
Change-Id: I536a4d45d5d915ab02dc13db6124a1ce8949fe48
Add min_candidate_rssi to wmi_per_roam_config. This is added to
provide the configured min candidate AP threshold to fw to be used
for PER(Packet Error Rate) based roaming.
Change-Id: I6e0ae1ebe578bcd6d858e1d5252dead6e849d54a
CRs-Fixed: 2050039
There are two implementation of WMI beacon template wmi cmd.
Remove redundant code by converging WMI beacon template
cmd implementation.
Change-Id: Icc9e1f5326c3197a7994ed10ea1ef6386edc7efd
CRs-Fixed: 2061681
Added support for wmi_service_chan_load_info which is newly
added in wmi service bitmap.
Change-Id: I95905ac95c5305f8f84ec512ecf1859955704193
CRs-Fixed: 2057719
Regulatory component needs to listen to vdev messages in order to track
whether a master mode vdev is getting created or destroyed. It is also
used to kick-start the state machine. Also re-run the state machine when
user-space country code is set.
Change-Id: I5112396314a936f84dad2f0e07329f9cb237aa78
CRs-Fixed: 2048784
pdev_id is required to get the pdev object from utf event. Extract
pdev_id from the seg info within utf event's data stream.
Change-Id: Id8d3263a7f33d234c7cb43c99a0a44f28df5724d
CRs-Fixed: 2055128
Recently, FW changes were implemented to support WMI resource config for
multi-radio. As part of this, the TBTT offset and SWBA events were modified
to support increase in the number of vdevs per SOC.
Brief description of the changes with respect to TBTT offset
------------------------------------------------------------
Converged FW will send extended TBTT offset event when the number of vdevs
configured is greater than 32 and will continue to send normal TBTT offset
event when the number of vdevs configured is less than 32. Legacy FW will
continue to send vdev map and tbttoffset list array as part of the TBTT
event.
Extraction API is added to extract the number of vdevs configured for both
legacy and converged FW. Number of vdevs is sent directly by the FW for
extended TBTT offset event but sent as vdev map for the normal TBTT offset
event. In order to handle normal TBTT offset event, extraction API for
normal TBTT event adds logic to convert vdev map into the number of vdevs
configured.
Extraction APIs are added to extract vdev id and tbttoffset information per
vdev that are configured. The vdev id information is sent as vdev map and
tbttoffset list as an array for normal TBTT event and as an array of
structures containing vdev id and tbttoffset in the case of extended TBTT
event. In order to support normal TBTT event based on num vdevs, extraction
API for normal TBTT eventadds logic to determine the vdev id from vdev map
based on the index(running through 1 to total number of vdevs) passed from
the driver.
Brief description of the changes with respect to SWBA
-----------------------------------------------------
Converged FW will send additional information num vdevs and vdev id
embedded in tim info and p2p noa TLVs for SWBA event. Legacy FW will
continue to send vdev map and array of tim info and p2p noa desciptors.
Extraction APIs is added to extract the number of vdevs configured for both
legacy and converged FW. Number of vdevs is sent directly by the FW for
SWBA event in the case of converged FW and as a vdev map in the legacy FW.
In order to handle legacy FW, extraction API for non-TLV adds logic
to convert vdev map into number of vdevs configured.
Extraction APIs are modified to extract newly embedded vdev id information
in tim info and p2p noa descriptors. The vdev id information is sent as
vdev map for legacy. In order to handle legacy FW, extraction API for
non-TLV adds logic to determing the vdev id from vdev map based on the
index (running through 1 to total number of vdevs) passed from the driver.
Change-Id: Ibf84adbb1c526321ec031d5539aff66dcbd1315b
CRs-Fixed: 2053628
Changes added to support multiradio feature.
Included pdev_id and/or vdev_id in required ATF specific WMI data
structures. All ATF commands will be sent with pdev_id and/or vdev_id.
Change-Id: I723a9a6e4a67a417d4aa2b392285dc4afa590a21
CRs-Fixed: 2052786
pdev_id in FW starts from one. Zero is reserved for Soc. But host uses
pdev_id starting from zero. Make WMI changes to take care of this
difference and always provide and accept pdev_id starting from zero at
WMI. Use 0xFF for SoC on host.
Change-Id: I49f481e54bbaeea9359753bc7d3da9092fc9559a
CRs-Fixed: 2045125
1. Add multi radio support for thermal throttling
2. Add TLV WMI support for thermal throttling
Change-Id: I2cdbf9a4acdd9346c0fe3dd24c510885cc8fef8e
CRs-Fixed: 2041264
Update enums in WMI service enums that got introduced in the latest
FW headers.
Change-Id: I46f70ff5eb41aee15f8cac784cc85201a3362fca
CRs-Fixed: 2045146
ol_defines header inclusion is invalid in WMI layer.
Remove the header inclusion by abstracting the dependency
with in WMI layer.
Change-Id: I5eb8624605cde20b516a1d8d0c823996c363e119
CRs-Fixed: 2023821
Add support in WMI layer to configure coex config command for
lithium based chipsets
CRs-Fixed: 2037499
Change-Id: Ib83407524bd3b5cdad28f73a6ccc36d4a0271779
