Update the ap power type when STA moves in/out of 6G
during roaming in beacon process API. Add new API
wlan_reg_get_6g_power_type to return ap power type
and country code match.
Currently, after roaming, the lim join req is null and
the null check in TPC calculation API returns without
calculating the TPC power again. This change should
fix the issue and recalculate TPC power after roaming.
Change-Id: Ide50d1d516307dd5661ad31f2b48c85f08ed2891
CRs-Fixed: 2968407
In case of WTC_BTM roam trigger reason, if FW reports rssi
threshold for 5G and 6G AP via wmi_roam_trigger_reason,
Host should print it in kmsg.
If wtc_candi_rssi_ext_present is set (1), It means fw
reports 5g and 6g candidate rssi (new firmware case).
If wtc_candi_rssi_ext_present is clear (0), It means fw
doesn’t report 5g and 6g candidate rssi (old firmware case).
Host use flag "wtc_candi_rssi_ext_present" to keep backward
compatibility.
Change-Id: Idbaac2e9d470525641c152b024b8786d262e600c
CRs-Fixed: 2965025
Currently driver does not fill cac duration for wiphy channels
whenever it indicates current channels configs to user space.
With this change fill cac duration as well in wiphy channels
Change-Id: I847468f0c1839974ea1c6cd31260fb7ef4fbb897
CRs-Fixed: 2975822
If the channel-list that AP is asking us to switch is invalid, then
we cannot switch the channel. Just call lim_tear_down_link_with_ap()
to disassociate from AP. We will find better AP.
So, vdev_stop, peer_del, vdev_down will be sent. VDEV_MLME state
is back to init.
But, we didn't clean flag chan_switch_in_progress. When better AP
found, vdev will start. Because flag chan_switch_in_progress is true,
WMI_VDEV_RESTART_REQUEST_CMDID sent. But WMI_VDEV_START_REQUEST_CMDID
is expected. And then WMI_VDEV_RESTART_RESP_EVENT received.
Host will send WMI_PEER_SET_PARAM_CMDID with parameter ID
WMI_PEER_CHWIDTH(4) once WMI_VDEV_RESTART_RESP_EVENT received.
However, FW was already back to INIT state because vdev already down.
PEER state was init state, PEE_CHWIDTH set not allowed.
So, flag chan_switch_in_progress should be clean if vdev_stop sent.
Change-Id: I1b72b2a774b80b3725c7a21ec0d308036d551dcb
CRs-Fixed: 2970123
At present, duplicated thermal level change events are reported
on different mac with different pdev id from target. To report
the lowest pdev id's thermal level to avoid confusing the user.
Change-Id: Ia1f497ba1a1e0af946b87924de80b9fd39fe95e8
CRs-Fixed: 2976437
Add sanity check for RRM global channel list to avoid
possible NULL-Pointer issue.
Change-Id: Icfbf5282304a549a0dc92889f83cb1a31dde15b2
CRs-Fixed: 2972194
There is potential risk when starting CFR and resume happens at same
time. Wake lock is added to CFR component, and this change enables
wake lock for enhanced CFR.
Change-Id: I1ebe8c11fad66b66adcad0b551756abf2c010cde
CRs-Fixed: 2977699
Currently, rssi of rx data packet is not received as part of rx_tlv_hdr.
To mitigate this limitation, fill the average rx rssi received from
firmware in wmi smart monitor event which is stored in pkt_capture's
vdev_priv structure.
Change-Id: I3a1b7b766979816d6b17f05edc1c25d503edec1d
CRs-Fixed: 2958109
Host creates a precac adapter and uses it for all the precac
request instances from userspace. To avoid cac state impact
of previous instance on current precac request, reset the
cac_state before starting a prepcac adapter.
Change-Id: I8bb7a2d10350eeeafaac9bea60947a52a1e8686e
CRs-Fixed: 2970505
In WEP connection, IV values used for consecutive packets
could be random and need not be monotonically increasing
or consecutive in case of fragments. This could result in
incorrect drop of fragments.
Fix is to not do PN check in case of WEP security.
Change-Id: I8bfe16f3bf68752f4279b3fae1cf485a3abc1af7
CRs-Fixed: 2977416
Host use GFP_KERNEL flag in cfg80211_vendor_event() to send CFR data
via NL event to userspace. Host gets CFR data from FW and processes
it in soft_irq context. To avoid host sleep in soft_irq context, call
cfg80211_vendor_event() with GFP_ATOMIC flag.
Change-Id: I9ab5451eb2650fe177638d0bb3974a9c933a1cf9
CRs-Fixed: 2978140
Add function to populate the rx average rssi received from target in
pkt_capture vdev_priv structure. The rx average rssi is received in
wmi smart monitor event.
Change-Id: I9206669b418a2245bb8d53920040fddea77ce06c
CRs-Fixed: 2969242
Currently ini based tx aggr support disabled due to firmware
incompatibility.
This change is to enable ini based tx aggr support based
on firmware capability.
Change-Id: Id5d7197f18fafd926de889f9b69ca2be90497fd2
CRs-Fixed: 2859709
This reverts commit I9e49ad5218f913f116cf4472f768f572740f14df
since ini based tx aggregation is configured based on firmware
capability.
Change-Id: I54541cd282eda6606e75fa347989624a0e0fef01
CRs-Fixed: 2963280
With below INI configuration, SAP is not following the STA
channel. It's forming STA + SAP MCC instead of Forced SCC.
1. gWlanMccToSccSwitchMode = 4
(QDF_MCC_TO_SCC_SWITCH_WITH_FAVORITE_CHANNE)
2. gEnableSAPManadatoryChanList=1
When channel switch mode is
QDF_MCC_TO_SCC_SWITCH_WITH_FAVORITE_CHANNE and if STA
is on 5ghz and SAP also comes on 5ghz then driver considers
the HW mode as DBS capable and it allows SAP to form
MCC which is not favorable.
For non_DBS target, the fix is to allow SAP to
do force SCC if the channel switch mode is
MCC_TO_SCC_SWITCH_WITH_FAVORITE_CHANNE.
Change-Id: I4b945dc1831909caff72f8398c959f4450765f2b
CRs-Fixed: 2972273
Register handler for wmi smart monitor event in packet capture
mode in lithium. Currently, wmi smart monitor event provides
average rssi of last ten received data packets.
Change-Id: Ieeea5cbef328b04f139f54e7a42d52a3cf25824b
CRs-Fixed: 2969245
Reorder error checks in ipa_uc_ol_deinit, so it can
return immediately if IPA config is not enabled.
Change-Id: Ibf9f30650ce201eea562baf07b6dd9b83fd8dfff
CRs-Fixed: 2977474
Enable connection manager LFR2 code path, then all targets which are
using LFR2 will switch to connection manager code path.
Change-Id: I37f831596699d39e635d88ee88faf841f3a36063
CRs-Fixed: 2968850
Based on new requirement create a sysfs file dump_in_progress,
this file has read and write functionalities for a bool variable,
if the value in this file is set to 1 cnss_diag will trigger
DEBUG_DUMP cmd to wpa_supplicant_8_lib through wpa_ctrl socket.
After log copy completion cnss_diag will reset sysfs node to 0.
Change-Id: I93f612d3caf4ef6ad5db98bc531ab091e96c7817
CRs-Fixed: 2971373
When cfg80211 suspend comes to the driver it configures the various
offloads to FW and set the hdd_wlan_suspended flag. If FW crashes after
this flag is set, the driver reinitializes but this flag is not
reset. As a result of this, the data packets are dropped which
leads to the connection failure.
To resolve this issue, reset the hdd_wlan_suspended flag during the
driver reinitalization.
CRs-Fixed: 2976125
Change-Id: I125a6a840f9cd7673fed921d1af112a6e1671bcb
Currently, if it's 11r connection, zero out reassoc_ft_ie in
cm_preauth_success(), it will cause FT roaming failed due to
ft ie loss with reassoc request frame.
Fix is to only zero out reassoc_ft_ie when connection is 11r
and open mode.
Change-Id: I8c1d6ca743b528c4ab0211723a792b14abe5acab
CRs-Fixed: 2976385
