Add CDP api support for umac reset init API, these apis are expected
to be called whenever shmem is deinitialized.
Change-Id: I307c586454580ab8f83b0d515defa93d4e8ff656
CRs-Fixed: 3458268
1. Check Tx halt during umac reset and avoid halt if set already.
2. Perform SRNG disable only in case of umac reset
Change-Id: Id364a6460a64e83002b5c96e08031ad2a0bc8fd7
CRs-Fixed: 3459427
Per new design, FW will use HTT_MSDU_QTYPE_USER_SPECIFIED instead of
HTT_MSDU_QTYPE_LATENCY_TOLERANT for TX ILP support judgement,
change it in host part accordingly.
Change-Id: I0318801c4fe11ca623a99459d9f6820acb1c8fea
CRs-Fixed: 3462232
Add DP API to evaluate if TX ILP needs to be enabled,
it is only enabled if following two conditions are met,
(1) INI for TX ILP is enabled
(2) htt msdu index to qtype mapping table index 3 value is
HTT_MSDU_QTYPE_LATENCY_TOLERANT
Change-Id: I4d0c1103941b8b12b8441762dc6b45d28ee1df21
CRs-Fixed: 3447096
Add support to send RX stats when Direct switch is
enabled. For WDS extended mode get the stats from
peer object, else take it from vdev object. These will
be accumulated by PPEDS module
Change-Id: I1f73c50679c416536cfc1ebaaeaec9b307e8bf56
CRs-Fixed: 3421251
done the following changes to improve the RX path KPI
1. remove the extra invalidate in RX path as
we no longer dirty the RX TLV cache lines.
we now store the rx error codes in nbuf cb instead
of RX TLVs reserved memory bytes.
2. with features like flow tag and wds extended mode
enabled by default, the rx_fast_flag is always set
to false, this resulted in lot more instructions
being executed in RX path.
Now we ensured this flag is at least set for other
features which are not enabled by default.
Change-Id: I04c6bdc52a2b3f1248b822a108d8bd1a70abcc7c
CRs-Fixed: 3406505
Move cfr monitor filter cdp func ptr to cdp mon ops structure.
cfr monitor filter cdp function is different for 1.0 and 2.0
hence moving the func ptr to mon ops structure ensures that
func ptr is initialized appropriately.
Change-Id: I82b9c85e96f2f219521ae6ed908ade120081c748
CRs-Fixed: 3428791
This code helps to initialize and deinitialize new SOFTUMAC
based Rhine architecture.
Change-Id: I374140ccb3b31e9351c6e683c77d81a5a876472a
CRs-Fixed: 3382913
Currently dp_soc_init/deinit API's are called first for
common soc initialization/deinitialization and then architecture
level init/deinit APIs are called from base dp_soc_init/deinit.
But with RHINE architecture dp_soc_init/deinit API's are not common,
so we cannot call these APIs as base. To handle this scenario
routing all the soc level init/deinit from arch ops APIs and
arch ops APIs will take care of calling common soc_init/deinit.
Change-Id: Ibb10d452931630c917088b4d222c7fbd82621f6a
CRs-Fixed: 3404205
Refactor DP rings related code to different files, such that
both hardware UMAC based and Software UMAC based platforms
can use required code effectively.
Change-Id: Ie58eae34a2da77c2d63870fab74b9d2d9d49c14a
CRs-Fixed: 3382905
Clear the target assert seen SOC from partner_map to disengage it from
umac reset process.
Change-Id: I588ae15977b1fd989b6dccb16c5fa3a5269f5f6c
CRs-Fixed: 3433794
Add CDP api support to notify asserted soc info to DP
umac reset module, to disengage a asserted soc from
umac reset process.
Change-Id: I92ee07ed90243567dab83d0686022c8327efe1b6
CRs-Fixed: 3428265
In the case of WCN6450, sizes of the TX descriptor pools are not known
to the driver during load time. The sizes are shared by the firmware
post VDEV creation via HTT_T2H_MSG_TYPE_FLOW_POOL_MAP HTT message.
After the VDEV gets deleted in the firmware, a corresponding flow unmap
HTT message will be sent to the driver to clean up the TX descriptors
of a particular VDEV.
Add logic to handle the flow map/unmap HTT messages for WCN6450. These
messages are specific to WCN6450 and hence the logic is implemented in
arch specific HTT code.
Change-Id: I8edcabbec77abae2c238f487acb7a48b478fd149
CRs-Fixed: 3381751
Set WDI version based on SOC architecture, set WDI
version to IPA_WDI_4 for QCA_WIFI_QCN9224 chipset,
else IPA_WDI_3.
Change-Id: Ib80435e5098cfbcb9f90d4ac9cfe81ea183f308a
CRs-Fixed: 3383949
At continuous physical address limited telematics platform,
in order to avoid occasional memory alloc failure with big
kzalloc size, it's better to use virtual memory allocation
API instead. And below items will be refined to replace
malloc with valloc if CONFIG_ENABLE_VALLOC_REPLACE_MALLOC=y.
1 x 30488 = 30488B @dp_soc_attach:15189
1 x 52096 = 52096B @hal_attach:1104
4096 x 64 = 262144B @dp_rx_desc_pool_alloc:337
Change-Id: I57a6f78f690b5be1838de954933ae36129cea234
CRs-Fixed: 3426935
1. Add an API to process trigger_umac_recovery T2H message.
2. Synchronize do_pre_reset, do_post_reset_start, do_post_reset_complete
messages for all the SOCs and then process these messages in the host.
3. Synchronize pre_reset_done, post_reset_start_done,
post_reset_complete_done for all the SOCs before sending it to FW.
4. Add a new state in host for trigger_umac_recovery message.
Ignore back to back trigger_umac_recovery messages received from FW.
Change-Id: Id45d326d63e122834090844e83ad6cc7240f96af
CRs-Fixed: 3425833
Support REO2SW ring pointer update threshold configuration,
it is helpful for PCIe utilization improvement.
timer based threshold - M: issue pointer updates when M micro
seconds has elapsed.
number based threshold - N: issue pointer updates when N entries
updates occur.
Change-Id: I49ed388520fd52e97e303d6ea9c04ced6cb5cf5f
CRs-Fixed: 3420101
Add support to enable/disable MLO Link Peer stats through
ini and cfg80211tool enable_ol stats command
Change-Id: Id1229a149befa416d060e1b07eee150e6b295abf
CRs-Fixed: 3397721
1) Allocation of memory to hold MLO Link Stats
at MLD Peer level.
2) Modify the Macros to update MLO link stats.
3) Init and reset the Stats
Change-Id: Id4e9d40e212c5093159ae0c7d6316e93d19cf928
CRs-Fixed: 3397721
Add HMWDS rem-addr support to delete AST WDS mac entries in
Beryllium chipsets.
Change-Id: I5623bac02b326d1d668ad5e1fdcfc3a9f8cbbb9c
CRs-Fixed: 3397961
Currently, there is a compilation error on the
OWRT SI in the alternate code path when optional
dp feature is not enabled.
The caller wlan_ipa_wdi_init_set_opt_wifi_dp() passes an
argument of incompatible type. This change fixes the
compilation issue.
Change-Id: I1f2eecbb67bfb2ef17ee73ce2faedb85827b4bbc
CRs-Fixed: 3417214
This change adds the optional wifi datapath feature
to transfer data to and from modem via WLAN.
By using the existing path between WLAN and IPA, this
change registers new interfaces between IPA and WLAN
to reserve, add, delete and release rx filters,
which are required for setting up CCE filter rules.
These filters help to determine which packets need
to be routed to IPA specific REO rings.
Change-Id: I17c2ab77ae343f15d6b79fa02bb70ed62294089c
CRs-Fixed: 3403314
Make DP changes for handling umac reset in QCA5332.
Changes are done to program msi_data value of the IPC interrupt to FW.
Change-Id: Ib6453755e191da655b87b528a7cef38a464f316b
CRs-Fixed: 3401146
Add cdp layer API to get stats and
Copy pdev deterministic stats from dp_pdev to cdp structure
Change-Id: Ia7dbbe4cfe7ebe66a040879144505b17aaaa625a
CRs-Fixed: 3380939
Add cdp layer API to get stats and
Copy peer deterministic stats from dp_mon_peer to cdp structure
CRs-Fixed: 3380939
Change-Id: Ic90b9c9f5c7463ad0d5b7c2bb7a371e4d4fef070
The kernel-doc script identified a large number of documentation
issues in dp/wifi3.0/dp_main.c, so fix those issues. In addition,
there are a number of instances where public functions have their
implementation documented instead of having their interface
documented, so remove that documentation. The documentation at the
interface will be added separately if it is not already present.
Change-Id: Id9bcfd37d690b72ec7a04f25d1b91b0210bef8e3
CRs-Fixed: 3373154
Target is sending interrupt even interrupt handler is not
registered for the vlan RX DST ring, and causing kernel crash.
Fix is to disable the IRQ line if host is not supposed to handle
the interrupt for vlan RX DST ring.
Change-Id: I91b8a5784969e1022d283793905c33340492706b
CRs-Fixed: 3348574
