Add sanity check for RRM global channel list to avoid
possible NULL-Pointer issue.
Change-Id: Icfbf5282304a549a0dc92889f83cb1a31dde15b2
CRs-Fixed: 2972194
There is potential risk when starting CFR and resume happens at same
time. Wake lock is added to CFR component, and this change enables
wake lock for enhanced CFR.
Change-Id: I1ebe8c11fad66b66adcad0b551756abf2c010cde
CRs-Fixed: 2977699
Currently, rssi of rx data packet is not received as part of rx_tlv_hdr.
To mitigate this limitation, fill the average rx rssi received from
firmware in wmi smart monitor event which is stored in pkt_capture's
vdev_priv structure.
Change-Id: I3a1b7b766979816d6b17f05edc1c25d503edec1d
CRs-Fixed: 2958109
Host creates a precac adapter and uses it for all the precac
request instances from userspace. To avoid cac state impact
of previous instance on current precac request, reset the
cac_state before starting a prepcac adapter.
Change-Id: I8bb7a2d10350eeeafaac9bea60947a52a1e8686e
CRs-Fixed: 2970505
In WEP connection, IV values used for consecutive packets
could be random and need not be monotonically increasing
or consecutive in case of fragments. This could result in
incorrect drop of fragments.
Fix is to not do PN check in case of WEP security.
Change-Id: I8bfe16f3bf68752f4279b3fae1cf485a3abc1af7
CRs-Fixed: 2977416
Host use GFP_KERNEL flag in cfg80211_vendor_event() to send CFR data
via NL event to userspace. Host gets CFR data from FW and processes
it in soft_irq context. To avoid host sleep in soft_irq context, call
cfg80211_vendor_event() with GFP_ATOMIC flag.
Change-Id: I9ab5451eb2650fe177638d0bb3974a9c933a1cf9
CRs-Fixed: 2978140
Add function to populate the rx average rssi received from target in
pkt_capture vdev_priv structure. The rx average rssi is received in
wmi smart monitor event.
Change-Id: I9206669b418a2245bb8d53920040fddea77ce06c
CRs-Fixed: 2969242
Currently ini based tx aggr support disabled due to firmware
incompatibility.
This change is to enable ini based tx aggr support based
on firmware capability.
Change-Id: Id5d7197f18fafd926de889f9b69ca2be90497fd2
CRs-Fixed: 2859709
This reverts commit I9e49ad5218f913f116cf4472f768f572740f14df
since ini based tx aggregation is configured based on firmware
capability.
Change-Id: I54541cd282eda6606e75fa347989624a0e0fef01
CRs-Fixed: 2963280
With below INI configuration, SAP is not following the STA
channel. It's forming STA + SAP MCC instead of Forced SCC.
1. gWlanMccToSccSwitchMode = 4
(QDF_MCC_TO_SCC_SWITCH_WITH_FAVORITE_CHANNE)
2. gEnableSAPManadatoryChanList=1
When channel switch mode is
QDF_MCC_TO_SCC_SWITCH_WITH_FAVORITE_CHANNE and if STA
is on 5ghz and SAP also comes on 5ghz then driver considers
the HW mode as DBS capable and it allows SAP to form
MCC which is not favorable.
For non_DBS target, the fix is to allow SAP to
do force SCC if the channel switch mode is
MCC_TO_SCC_SWITCH_WITH_FAVORITE_CHANNE.
Change-Id: I4b945dc1831909caff72f8398c959f4450765f2b
CRs-Fixed: 2972273
Register handler for wmi smart monitor event in packet capture
mode in lithium. Currently, wmi smart monitor event provides
average rssi of last ten received data packets.
Change-Id: Ieeea5cbef328b04f139f54e7a42d52a3cf25824b
CRs-Fixed: 2969245
Reorder error checks in ipa_uc_ol_deinit, so it can
return immediately if IPA config is not enabled.
Change-Id: Ibf9f30650ce201eea562baf07b6dd9b83fd8dfff
CRs-Fixed: 2977474
Enable connection manager LFR2 code path, then all targets which are
using LFR2 will switch to connection manager code path.
Change-Id: I37f831596699d39e635d88ee88faf841f3a36063
CRs-Fixed: 2968850
Based on new requirement create a sysfs file dump_in_progress,
this file has read and write functionalities for a bool variable,
if the value in this file is set to 1 cnss_diag will trigger
DEBUG_DUMP cmd to wpa_supplicant_8_lib through wpa_ctrl socket.
After log copy completion cnss_diag will reset sysfs node to 0.
Change-Id: I93f612d3caf4ef6ad5db98bc531ab091e96c7817
CRs-Fixed: 2971373
When cfg80211 suspend comes to the driver it configures the various
offloads to FW and set the hdd_wlan_suspended flag. If FW crashes after
this flag is set, the driver reinitializes but this flag is not
reset. As a result of this, the data packets are dropped which
leads to the connection failure.
To resolve this issue, reset the hdd_wlan_suspended flag during the
driver reinitalization.
CRs-Fixed: 2976125
Change-Id: I125a6a840f9cd7673fed921d1af112a6e1671bcb
Currently, if it's 11r connection, zero out reassoc_ft_ie in
cm_preauth_success(), it will cause FT roaming failed due to
ft ie loss with reassoc request frame.
Fix is to only zero out reassoc_ft_ie when connection is 11r
and open mode.
Change-Id: I8c1d6ca743b528c4ab0211723a792b14abe5acab
CRs-Fixed: 2976385
Add skip_tpe check in beacon process API so that TPC power
calculation API is not invoked for 2G/5G roaming case if
skip tpe INI is set even though tpe power from beacon has
changed.
Change-Id: I4886634ac04e5dfdfce192d9099976fd436fc4c0
CRs-Fixed: 2966000
When FEATURE_HAL_DELAYED_REG_WRITE enabled, also enabled
SHADOW_WRITE_DELAY to avoid back to back shadow reg write.
Change-Id: I8d48496814e063ebd441db3520e3a5406c5db13e
CRs-Fixed: 2967202
Fix LFR2 roaming related memory leak issues in function
lim_send_reassoc_req_with_ft_ies_mgmt_frame() and
wlan_cm_host_roam_start().
Change-Id: I83271b57d0651d680324b67f0e6e6a3694c9ab8c
CRs-Fixed: 2976469
Add debug log to print more details about the link vote id when
PCIe link suspend is not allowed.
Change-Id: I5069202436e0da37b8ae22f84e28ac06d35002b5
CRs-Fixed: 2964957
Return success when firmware doesn't support 11k offload, or else
subsequent roaming related wmi commands have no chance to issue.
Change-Id: I69d55cca63f2b7ab4787295a2825159395cf2a11
CRs-Fixed: 2976163
NDI delete may get issue while NDI creation is still in progress.
NDI session doesn't get cleaned up as it's done based on
CSR_IS_CONN_NDI(&session->connectedProfile), which is valid only
after the NDI is created i.e. START_BSS success.
So cleanup should happen based on an intermediate check,
i.e. if WLAN_SER_CMD_VDEV_START_BSS is still in queue.
This was there earlier but got removed as part connection mgr
cleanup as the station connection is moved to CM path.
Add a check on WLAN_SER_CMD_VDEV_START_BSS and cleanup NDI.
Change-Id: If692cf0e594cbdcb89cd1d8a0ad591b5bae3de49
CRs-Fixed: 2969276
As part of regulatory cleanup, remove utils_dfs_mark_leaking_ch()
Use utils_dfs_mark_leaking_chan_for_freq() instead of
utils_dfs_mark_leaking_ch()
Change-Id: I796de0abb50fdbdf9d61768a190553e031a7989e
CRs-Fixed: 2972007