Increase “OPE_MAX_CDM_BLS” to 32 from 24 and MAX_STRIPES to
64 from 48.
CRs-Fixed: 3082993
Change-Id: I9e3631cc86c5e10e4e2020d4a9b2264ea282e437
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Add support to dynamically switch pix_pattern of read clients
based on data received in each request.
CRs-Fixed: 2811530
Change-Id: Icb3ebd33cae59b8db87bc0011d6560492ad29c3a
Signed-off-by: Rishabh Jain <risjai@codeaurora.org>
Adds support for camera kernel driver source being moved to Vendor SI.
CRs-Fixed: 2835738
Change-Id: Ibb876edb1284bc77c366c3ef9e1ee9a39981c960
Signed-off-by: Karthik Jayakumar <kjayakum@codeaurora.org>
Holi has different version of camnoc and CPAS version
which requires separate register space and camnoc
interface changes and CPAS version change.
This change adds the same.
CRs-Fixed: 2701462
Change-Id: I9fbfab592278ba7804809872b4b4b235895477f2
Signed-off-by: Suresh Vankadara <svankada@codeaurora.org>
msm: camera: tfe: Fix variable initialization issues
msm: camera: isp: Dual tfe event check with proper hw idx
msm: camera: smmu: Add support for non-contiguous mermory region
msm: camera: smmu: Use iommu best match algo for camera
msm: camera: ope: Optimize allocation of IO configuration
msm: camera: ope: Fix for KW Issues
msm: camera: ope: Add support for stripe level height configuration
msm: camera: tfe: Enable the delay line clc
msm: camera: ope: Fix false alarm for OPE HW timeout
msm: camera: tfe: Support register dump per request
msm: camera: ope: Increase max number of stripes
msm: camera: ope: Change packer and unpacker format in case NV12
msm: camera: tfe: Add packet code get command for tfe
msm: camera: ope: Trigger recovery in case of violation on write bus
msm: camera: ope: Protect ope hw reset with mutex
msm: camera: ope: Add a check for valid request in cdm callback
msm: camera: ope: Remove the BW & clock vote in release context
msm: camera: ope: Reduce OPE BUS memory
msm: camera: ope: Fix return value for ope acquire
msm: camera: ope: Fix false alarm for OPE request timeout
msm: camera: ope: Avoid deadlock during recovery after HW hang
msm: camera: tfe: tfe debug enhancement
msm: camera: cdm: Fix irq_data value in case of inline irq
msm: camera: flash: Switch off flash on provider crash
msm: camera: ope: Initialize ope hw mutex structure
msm: camera: cdm: Flush all available FIFOs during reset
msm: camera: cpas: Add mandatory bw option for axi ports clocks
msm: camera: ope: Use vzalloc to allocate the write bus ctx structure
msm: camera: ope: Fix handling of init hw failure
msm: camera: tfe: Enable per frame register dump for rdi only context
msm: camera: cdm: Protect cdm core status bits with mutex
msm: camera: cdm: correct the error check in cmd submit irq
msm: camera: ope: Fix unclock access during HW reset
msm: camera: ope: Program frame level settings after idle event
msm: camera: ope: Delay releasing of resources for last context
msm: camera: isp: Increase default SOF freeze timeout
msm: camera: smmu: Add map and unmap monitor
msm: camera: isp: Add trace events across ISP
msm: camera: smmu: Profile time taken for map, unmap
msm: camera: ope: Start context timer on receiving new request
msm: camera: tfe: Reduce stack size during set axi bw
msm: camera: cdm: Check for HW state before dumping registers
msm: camera: ope: Reduce stack footprint during acquire
msm: camera: tfe: Disable clock if tfe2 is not supported
msm: camera: cdm: Avoid cdm pause incase of BL submit
msm: camera: tfe: Optimize CSID IRQ logging
msm: camera: ope: Move request id validity check outside of lock
msm: camera: tfe: Correct the tfe hw manager dump logic
msm: camera: ope: Synchronize flush and submit BLs
msm: camera: cdm: Protect cdm reset status
msm: camera: cdm: Handle cdm deinit sequence properly
msm: camera: tfe: Reduce reset timeout to 100ms
msm: camera: ope: Fix hang detection
msm: camera: ope: Make non-fatal logs as debug and info logs
msm: camera: tfe: set overflow pending bit to zero after HW reset
msm: camera: ope: Do not disable CDM during error handling
msm: camera: ope: Add support for OPE Replay
msm: camera: ope: Stop OPE in case of init failure
msm: camera: ope: Synchronize process cmd and flush request
msm: camera: cdm: Fix CDM IRQ handling
msm: camera: tfe: LDAR dump for TFE
msm: camera: ope: Fix the length check for debug buffer
msm: camera: cdm: Fix CDM reset logic
msm: camera: ope: Dump debug registers in case of HW hang
msm: camera: tfe: Support the RDI bus port for line based mode
msm: camera: cdm: Handle out of order reset done events
msm: camera: ope: Consider other contexts during timeout
msm: camera: ope: Put GenIRQ in last stripe BL
msm: camera: tfe: Process the rdi interrupts for rdi only resource
msm: camera: jpeg: Check the HW state before accessing register
msm: camera: csiphy: Update csiphy power-up sequence for lito v2
msm: camera: cdm: Secure freeing of request lists using locks
msm: camera: cpas: Add support for Scuba camnoc
msm: camera: csiphy: Clear secure phy flags on release
msm: camera: tfe: validate the tfe bw num paths
msm: camera: ope: Reorder the reset order in ope acquire
msm: camera: ope: Dump debug registers in case of reset failure
msm: camera: ope: Add logic to detect hang in CDM
msm: camera: isp: Increase max count of cfg to support more init packets
msm: camera: core: Fix cpas axi clk rate overflow.
CRs-Fixed: 2668666
Change-Id: I882ca4bd117bebc7d1c62bc82299d69d7b5c9388
Signed-off-by: Trishansh Bhardwaj <tbhardwa@codeaurora.org>
Aligns the uapi header types and includes to be in-line with upstream
kernel formatting. The errors are given by enabling the UAPI_HEADER_TEST
config, which is now enabled in GKI builds.
CRs-Fixed: 2679250
Change-Id: I195fb2aab9251043fc63d79dd31f2db53b1228f5
Signed-off-by: Karthik Jayakumar <kjayakum@codeaurora.org>
OPE is camera offline engine, support is added
to enable camera OPE hardware.
CRs-Fixed: 2520602
Change-Id: I8b08ecb34323ee927f2be88707ad65ad2444447d
Signed-off-by: Suresh Vankadara <svankada@codeaurora.org>
Signed-off-by: Ravikishore Pampana <rpampana@codeaurora.org>
Signed-off-by: Pavan Kumar Chilamkurthi <pchilamk@codeaurora.org>
