Adds ini field to control the filter for rx avg rate calculation.
0 : Filter Disabled
11000 : Max rate filter (in kbps) supported for filter
Change-Id: I6ae88b7af3d4c1fae033101e77b308949e5b3d1e
CRs-Fixed: 3628056
add new ini to configure skb size and change it in each place its used
correspondingly
Change-Id: Id00c6351bf6bc1b9df5e19064b2057dadd315e9b
CRs-Fixed: 3584462
Monitor destination ring interrupt processing is configurable.
For improved CPU utilization the batch counter threshold and
timer threshold is updated and also an option is provided to make
this values configurable through INI.
Change-Id: Ibe671927f53f3e8fac7f17540c21a2c7edae427b
CRs-Fixed: 3569505
1. In lowmem profiles the number of tx_desc in 4th pool is reduced to
quarter for memory optimizations.
Added new API dp_get_updated_tx_desc which will return the desc value
from INI based on the flag DP_TX_DESC_POOL_OPTIMIZE.
2. Changes to introduce new INI to get reduced desc value for 4th tx
desc pool.
This helps optimize 0.75M per SOC in lowmem profiles.
Change-Id: I033fcaeb843019fb03bb77e0d05a3ebf60fa806a
CRs-Fixed: 3557483
For legacy tx monitor, we need msdu completion in sequence.
Modifying the return buffer manager id during enqueue will serialize
the msdu completion.
Return buffer manager will be over ride only when tx_monitor
is turned enabled.
Change-Id: I500065077b59b3ea3561ec8fc49af8cbe58c1dfe
CRs-Fixed: 3539636
Use page frag init time rx buffer allocation for efficient usage of memory.
Add ini dp_bufs_page_frag_allocs to disable and revert to original slab
nbuf allocations.
Change-Id: Iac78895addfe9da0118bc071c691a26216d6fda1
CRs-Fixed: 3553800
When the peer delete timer/vdev manager response timer expires, host checks
if the umac reset is in progress. If so, host will retrigger the timer.
It is possible that the umac reset is just completed and either of these
two timers got expired. In this case, host will assert saying that the peer
delete response/vdev manager response is not received from FW. FW may take
a few milliseconds to send the peer delete/vdev manager response to the
host after the umac recovery completes.
Hence, to avoid the crash, check if the umac reset was in progress during
the umac reset buffer window.
Add the below changes as well,
1) INI support to get the umac reset buffer window value.
2) Renamed the API dp_umac_reset_is_inprogress as
dp_get_umac_reset_in_progress_state to return either
CDP_UMAC_RESET_IN_PROGRESS or
CDP_UMAC_RESET_IN_PROGRESS_DURING_BUFFER_WINDOW.
Change-Id: Ie15ef0731bad4b0ed955a479f00e297b7ba10729
CRs-Fixed: 3522665
Add support for sw2rxdma_link_ring size cfg ini.
Also add wrapper function to get the sw2rxdma_link_ring size.
Change-Id: Ic5b17f029fe6c735785701801b75284dd489ac1e
CRs-Fixed: 3525040
add multiple history array to keep track of mem allocation and
deallocation for qref table.
Change-Id: I9fa97fbe5a5c36509cbb5a458851a152200318a5
CRs-Fixed: 3475981
1. Add ini configuration for enabling round robin flows to
core distribution in FSE
2. Register FSE APIs to CDP FSE ops
Change-Id: Ic61c44eb9bc68a8c1a0116d4e6aa1d54cf489b62
CRs-Fixed: 3505287
Allow the ppe ds tx descriptor pool to have a maximum
size of 64k tx descriptors.
Change-Id: I4c09b6337efaabedea93f36a3477f5bdcc32f288
CRs-Fixed: 3468613
This code helps to initialize and deinitialize new SOFTUMAC
based Rhine architecture.
Change-Id: I374140ccb3b31e9351c6e683c77d81a5a876472a
CRs-Fixed: 3382913
Support REO2SW ring pointer update threshold configuration,
it is helpful for PCIe utilization improvement.
timer based threshold - M: issue pointer updates when M micro
seconds has elapsed.
number based threshold - N: issue pointer updates when N entries
updates occur.
Change-Id: I49ed388520fd52e97e303d6ea9c04ced6cb5cf5f
CRs-Fixed: 3420101
Add support to enable/disable MLO Link Peer stats through
ini and cfg80211tool enable_ol stats command
Change-Id: Id1229a149befa416d060e1b07eee150e6b295abf
CRs-Fixed: 3397721
Enable or Disable PPEDS for specific
WLAN Soc.
usage:
add "ppeds_wifi_soc_cfg=0x02"
in /ini/global_i.ini to enable
PPEDS only for second WLAN SoC.
Change-Id: I65f138cf37298feac70e76b95c22507e58394618
CRs-Fixed: 3408439
Reuse the tx descriptors released in tx completions
without releasing the associated skbs to reduce
the cpu utilization in direct switch mode.
Change-Id: I4ab3ac58977a626344877b8a818a4dbc4864aaf3
CRs-Fixed: 3393968
Change the number of tx descs per soc for direct switch
used for ppe2tcl ring to 2048 from existing 8192 to reduce
buffer usage.
Change-Id: I1e749833002926e9b6b9a84d38651525548dc79c
CRs-Fixed: 3391066
If TX data is TCP ACK, configure TX flow index 3 in
SW2TCL data cmd ring descriptor.
Change-Id: Ibd08b13ba8f0481aa11cd9c3dc54a49cd73674fb
CRs-Fixed: 3368303
Added changes in wifi module to update PPE2TCL & REO2PPE ring
size as 8k to improve the perf for MLO case
Change-Id: I6ca241c21c44b4cda8869e5e2ae9a4a906d98fc8
CRs-Fixed: 3365361
An INI dp_tx_spl_device_limit is defined and can be used to configure the
limit of TX descriptors that can reserved on the SOC to handle
special frames like EAPOL.
CRs-Fixed: 3343207
Change-Id: Ic84a11249880a3541749a72ac6d60df548f2bc5c
An INI dp_tx_spl_desc is defined and can be used to configure the
limit of TX descriptors that can reserved on the pdev to handle
special frames like EAPOL.
CRs-Fixed: 3343209
Change-Id: I6578bddd1f4ea07528c9f66f778b113ec6fb9e61
1. Change the names of parameters and functions related
to direct switch feature from ppe to ppeds
2. Remove the unused ppe_release_ring
Change-Id: I5a95b1273e338f354903af98158578ac65758a8a
CRs-Fixed: 3345097
Enable and register PPE2TCL and REO2PPE ring interrupts
for direct switch
Set interrupt timer threshold for ppe2tcl ring as 30 us.
Change-Id: Ida1ff6c3c2000f16f07960f7eae0d10edc337dc0
CRs-Fixed: 3341790
Change minimum limit of dp_rxdma_buf_ring and
dp_ipa_tx_alt_ring_size value for ini may change little.
Change-Id: Ibbf8843b8f21bbfff1db83a0934f95222930b9ab
CRs-Fixed: 3338076
On low memory targets, even with current min values, OOM is seen
on driver load time. This requires us to further reduce
the min value.
With 11be enabled, current max value may not meet KPI requirements.
Hence align min and max INI values for IPA TX ring and TX completion
ring size with HOST used ones.
Change-Id: Iedf1c2d4be04d798314e9ba61a844038c5696f45
CRs-Fixed: 3338114
Enable ppe direct switch feature by default
through ini, and rename the ppe_enable parameter
to ppe_ds_enable
Change-Id: I574838394ab9edd0445f65f81f05566967208276
CRs-Fixed: 3339167
Add ini configuration to disable invalid decap type handling
during rx mon tlv processing. This is a temporary change for
debugging purpose and will be removed once HW issue is resolved.
Change-Id: I75eb53170833224ddd144baf1b1d8034f988dd3c
CRs-Fixed: 3308998
Add ini param "dp_disable_rx_buf_low_threshold" to disable
low threshold interrupts on regular rx refill ring. Default
it is enabled.
Change-Id: Ie471a4dc6862cbfe8b1eafe7c7d2ce2e0a7fcb7a
CRs-Fixed: 3313885
