Currently, if FW advertises more than three HW modes and more
than five caps, host returns error as the current max is below.
Increase max hw mode to 4 and mac phy cap to 8 to support cases
where we advertise more than hw 3 modes and more than 5 phy caps.
eg. SMM, DBS_or_SBS, AUX_EMLSR_SPLIT, AUX_EMLSR_SINGLE.
Change-Id: Idbc978a1a259d66e7d893d82f8becd6325019976
CRs-Fixed: 3599091
Change WLAN_UMAC_MAX_AID from 2008 to 1991 for reserving
1992-2007 value from AID pool for 11az TBR rSTA ranging.
Change-Id: I4e6a85d28c1391649ecc748d9b61167760858088
CRs-Fixed: 3479547
Change WLAN_UMAC_MAX_AID for reserving 1992-2007 value
from AID pool for 11az TBR RSTA ranging.
Change-Id: Iac2b198810cef975daa1cff7cb7012ad2a2f9df4
CRs-Fixed: 3468769
Add peer type for MLO bridge peer. This is a special peer
created on 4-link MLO AP to allow association of some 2-link
MLO STAs.
Change-Id: Id2073ea82582ae67cae03b813d8f7bf44fde9aff
CRs-Fixed: 3412299
The kernel-doc script identified many documentation issues in the
umac/cmn_services folder. A series of patches have already fixed most
of the issues on a sub-folder basis, so fix the remaining ones.
Change-Id: Ibdfe9f0c5e8d6ddf9696d66d2a4a31978ff89004
CRs-Fixed: 3403261
Add WMI interface(WMI_VDEV_SET_TWT_EDCA_PARAMS_CMDID) to
configure EDCA/PIFS param for LL SAP.
This configuration depends on edca_param_type.
If edca_param_type is 0 then host will configure EDCA param and
send it to firmware via WMI interface.
If edca_param_type is 0 then host will configure PIFS param and
send it to firmware via WMI interface.
Change-Id: I4f2e4120a258cc4a20aabeed503709aa2ceb8ec9
CRs-Fixed: 3349467
When AFC event come and update 6 GHz SP channels' state and power
attribution, SAP which already started on 5 GHz or 6 GHz channel
can move in or out from SP channel, which has higher tx power limit.
SAP target channel/bandwidth is decided by ACS channel select callback
register to SAP module, which will take channel max tx power limit
into account.
After target channel/bandwidth determined, SAPs move to same target
channel/bandwidth with eCSA process. If violate any concurrency
limitation, AFC DCS process should abort.
Add AFC component id and reference id.
Change-Id: Iba6933a30c0957eabf549fd6c8442bed547e8152
CRs-Fixed: 3204172
CH_WIDTH_320MHZ definition is in 11BE define currently and it's
causing duplicate code in 11BE supported/unsupported cases.
Definition need not be in 11BE define as it doesn't cause any
impact on memory.
Change-Id: I996aad941bef33eef6527c4c34c5b9efd75d9b84
CRs-Fixed: 3246577
Select best candidate by mlo score algorithm.
Check bss mlo type first by mlo info, mlo config, partner frequency and
dbs/sbs cap, calculate candidate score for SLO/MLMR/EMLSR bss types.
For SLO case, same as before except:
Decrease percent of legacy band and nss to include 320M and 8x8.
Decrease max percent of congestion from 100 to 80 to include MLMR joint
congestion.
Increase weight of both band width and nss to 20.
For EMLSR case, same as SLO except adding EMLSR boost score.
For MLMR case, besides adding MLMR boost score,
calculate joint RSSI/band width/congestion score for combination of
scan entry + each partner link by new mlo algorithm, select partner with
highest total joint score as candidate combination, only activate that
partner link.
Change-Id: I640c6825d945caf5fab504a77717195c2eac0c93
CRs-Fixed: 3234912
This change adds MBSSID support for MLO AID manager.
It handles AID allocation and AID free for MLO and Non-MLO peers
associated to MLO/Non-MLO VDEVs
Change-Id: I616cca6afeb9178a3b7f183c6bd986fe9b30a4fa
CRs-Fixed: 3200173
Add support to manage Wifi pos vdev private object. Add new peer
type in enum wlan_peer_type. Add rx_ops and register the rx_ops
for PASN peer create/peer delete request.
Register 11az PASN related WMI events in target if.
Change-Id: I2a5e4d8d7c9b9562d9ab02b287957e93ee6f4758
CRs-Fixed: 3154521
This change adds MLO support to Peer.
It implements,
1) MLO peer list management
2) AID allocation
3) MLO Peer creation/deletion
4) Notifying partner links on peer creation/deletion/assoc
Change-Id: Ie1b675dccdf0de1d79f6f32d9255cf3cca53fdf2
CRs-Fixed: 2967057
Add storage for EHT mac and phy capabilities as
per 11be D1.0 and update the EHT mac and phy capability
sizes.
Change-Id: I67224b35b701235374772e9975375e695f3ed959
CRs-Fixed: 3000166
Add a new component for MBSS framework in object manager.
Add a new trace module for the new MBSS component framework.
Change-Id: I7ef3559d90a6bc7f558e3994a1a91f09985d90e9
CRs-Fixed: 2958764
Add component id for Repeater feature.
Move the feature specific flgas to Repeater component.
Change-Id: I1615ce0023a0b0f7a3fffa206d6fa5f320a18ed3
CRs-Fixed: 2936326
Build regulatory channel list for 802.11BE wireless mode and for the
new channel width 240/320 MHZ. Following is the summary of the changes:
1. Add a new channel width CH_WIDTH_320MHZ.
2. Enumerate a list of 320 bonded channel frequencies.
3. Increase the maximum supported bandwidth to 320/240 in the channel map
4. Introduce reg_channel_list structure which holds an array of
channel params and also a bitmap to indicate the regulatory
puncturing pattern.
4. Build 320 and 240MHZ (punctured 320) regulatory channel list.
CRs-Fixed: 2901260
Change-Id: Ide6a070e0121fbdabf77820a552ca743ca38732a
Add gpio configuration vendor interface to set target
gpio configuration and output info, meanwhile add
GPIO component id
Change-Id: I0b551cd63b61675406fe37549f2efeca1a2999bf
For FILS pmksa cache, the pmksa add/del/query is based on SSID
and cache id. The current crypto pmksa cache API dosn't support
SSID and cache ID.
1. Add SSID/Cache ID support to pmksa API
2. Add RSN IE pmkid field based on SSID/cache ID
Change-Id: I1577c6293b75d6f8e6210f314dd83462e06d8190
CRs-Fixed: 2621860
Add initial set of coex files, implement the basic functions.
Coex component is used to process coex related configurations.
CRs-Fixed: 2565088
Change-Id: I8b9600809691b808f97c621cb329a6ab9941814c
