CFR config is passed on to FW through WMI
CFR feature code is moved into feature specific WMI file.
Change-Id: I00b57ea2ef4ec5520eb565910ac2c0a6478170e3
CRs-Fixed: 2582846
Add WMI unified APIs to extract PNO related WMI events in order to
remove wmi.h inclusion in target_if_scan.c.
Change-Id: I7fd28f175de002b48c294783f69b819ce2f3e37a
CRs-fixed: 2519032
After every roam happens or when neighbor report is sent by the
firmware, it sends the WMI_ROAM_STATS_EVENTID to host.
Add support to handle WMI_ROAM_STATS_EVENTID event from target
after every roam.
Change-Id: I4474135ac64ebfb17109d503fbd1c3d637457a73
CRs-Fixed: 2576258
To enhance visibility of 6GHz AP, 6G only AP shall send
Fils Discovery frame periodically in one beacon interval.
Change-Id: I51487380fca10418d2260dc2612e2adcf6cbb93b
CRs-Fixed: 2562434
Add new stats_id WMI_REQUEST_MIB_STATS &
WMI_REQUEST_MIB_EXTD_STATS in WMI_REQUEST_STATS_CMDID
to retrieve MIB statistics from fw.
Change-Id: I17bccc2673d1a2ce035db04d8426bab49db80790
CRs-Fixed: 2548165
Currently the driver doesnot support the sending and receiving of the
ani level from the firmware.
Add WMI and driver framework support to fetch the ani level.
Change-Id: Ib8271a2b7f62bafb22429113fbfb405cc81379ed
CRs-Fixed: 2554677
target_if F/W event handler is moved from wma to cmn part per
MCL/WIN converge requirement, clean up legacy call back.
Change-Id: Ifacc6bb46e6bde1a73d9953e3403551dd2e92939
CRs-Fixed: 2555080
Add WMI scheduler thread context execution framework
to process firmware events in the common project.
Change-Id: If56a4767ee9428d2f93d54ccbf5a8bb17e89e0f4
CRs-Fixed: 2554727
Add support for WMI over QMI to reduce power consumption for
periodic stats report.
Change-Id: Ic57b2bd18be803c97ffeea2e0073751d31e02202
CRs-fixed: 2521835
Enable DISA WMI commands for FIPS CCM test
by moving DISA WMI code to unified tlv files.
Change-Id: I90e82fef0e7e365faa6e15d555bf4d431214e14a
CRs-Fixed: 2516897
Currently the host gets service_ready_event and service_ready_ext_event
during the init sequence as a part of handshake with firmware. As the
size of the service_ready_ext_event exceeds on adding further
parameters, new event is created.
Add support for WMI_SERVICE_READY_EXT2_EVENT to be processed after
WMI_SERVICE_READY_EXT_EVENT based on the service bit
WMI_SERVICE_EXT2_MSG.
Also add support to extract the reg db/bdf version information that
comes inside the ext2 event.
Change-Id: If0b57af362e7eb653f9189b912ec1dd3efb0f731
CRs-Fixed: 2501132
This feature enables user to change HW mode dynamically
from DBS to DBS_SBS mode and vice-versa. Currently, HW
mode configuration is only possible through INI setting
requiring a subsequent reboot.
Relevant WMI changes are:
1. Relocate API wmi_unified_soc_set_hw_mode_cmd from
wmi_unified_sta_api.c to wmi_unified_api.c
2. Define API wmi_unified_extract_hw_mode_resp to extract
FW response
3. Parse and store new dev-cap fields wireless_modes,
low_2ghz_chan_freq, high_2ghz_chan_freq, low_5ghz_chan_freq,
and high_5ghz_chan_freq.
Change-Id: I49f975e7c5abc8503b651a3ebd4d56b23af915db
CRs-fixed: 2490212
Add support to read the RF characterization WMI event
and parse each individual TLV containing the channel's
center frequency, bandwidth and RF characterization
metric.
Also, remove the support for reading the RF
characterization metrics from the extended
service ready WMI event.
Change-Id: I560583f9304005282c09a27f47c8d5c2778b1645
CRs-Fixed: 2487415
This command is used to send OEM data binary blobs
from application/service to firmware.
Change-Id: Id806638bf8c53c65b32177969d965290da5701b9
CRs-Fixed: 2477337
Add WMI support for vdev delete all
peer request which will replace individual peer
delete of peers under a vdev during vdev down.
Change-Id: Ia41ae5fbf96a75d2a3e608564742d2a43e0ed2cc
CRs-Fixed: 2456858
Add changes to remove usage of void pointer for wmi_handle
Instead use an opaque pointer(set 2)
Change-Id: I06a89adaf15c6b398dbc901518aa83927b7ca16a
CRs-Fixed: 2479298
Add changes to remove usage of void pointer for wmi_handle
Instead use an opaque pointer(wmi_handle_t)
Change-Id: I7c6dce564f34352c75e0b9d0c90591de625f1959
CRs-Fixed: 2479299
Featurize PKTLOG cmd handle under feature flag FEATURE_PKTLOG
as part of CONFIG_MCL cleanup.
Change-Id: Iae8c7e7caad001d7d37a8e17c1eb892f96009066
CRs-Fixed: 2467198
Channel RF info contains metrics that signify the throughput
availability of all the supported channels. This information
is sent in as discrete TLVs (per channel) as part of the WMI
extended service ready event.
Each TLV contains the frequency, bandwidth represented and
the actual channel metric.
Add support to read the above-mentioned TLVs from the extended
service ready event
Change-Id: If947e179c1ca41466997cc48840a8d36b6236780
CRs-Fixed: 2441921
Convert host param id to target param id using arrays
instead of switch case. This enables removal of CONFIG_MCL
compile time macro and use specific macro
ENABLE_HOST_TO_TARGET_CONVERSION for conversions
Change-Id: I223141d47e92521e6600fc0e160ab2deef43d7d2
CRs-Fixed: 2418030
Send idle roam trigger monitor command to firmware based on
the SET SUSPEND mode command received from the user space.
The set suspend mode value sent will be used by firmware as
one of the parameters in determining if the device is in
idle state. When set suspend mode is 1, device is not in
idle state else the device is considered idle if idle state
data packet count, idle rssi, inactivity time criteria are met.
Add changes to send the idle trigger monitor value over the
wmi command WMI_IDLE_TRIGGER_MONITOR_CMDID.
Change-Id: I34632814a1e653fa87cfbab90c72ee1622dfd63c
CRs-Fixed: 2436222
Add support to get the various Coex data from the debugfs.
This commit adds the support to get the various coex data:
* COEX STATE
* COEX DPWB STATE
* COEX TDM STATE
* COEX IDRX STATE
* COEX ANTENNA SHARING STATE
The specific state information can be read via the debugfs.
Example to read the COEX STATE logging:
sm6150:/ # echo "1" > /d/wlan/mws_coex_status_info
sm6150:/ # cat /d/wlan/mws_coex_status_info
Reading for command MWS_COEX_STATE.
vdev_id = 0
coex_scheme_bitmap = 0
active_conflict_count = 0
potential_conflict_count = 0
chavd_group0_bitmap = 0
chavd_group1_bitmap = 0
chavd_group2_bitmap = 0
chavd_group3_bitmap = 0
Change-Id: I92272ad7edf44df22730ac0fa992d876840ba632
CRs-Fixed: 2413955
Add the necessary support for peer_extd2 stats in the WMI layer. The
stats contain rx_bytes, rx_err and rx_mpdus
Change-Id: I9f787e28a8e128471489c8f47ac03fef77dae930
CRs-Fixed: 2395636
Convert pdev and vdev param conversion array to pointers
and allocate them only if conversion is required.Use run-time
NULL check of pdev and vdev param pointers for conversion
and remove CONFIG_MCL compiler flag.
CRs-Fixed: 2393422
Change-Id: Ica1c81f5f3c3a4b7e31dcb70c63471898c36933d
There are multiple issues with the Link Layer Stats Unified API:
- struct ll_stats_clear_params and struct ll_stats_get_params both
incorrectly use the identifier "sta_id" to refer to a vdev_id.
- struct ll_stats_set_params has an unused "sta_id" field.
- Functions wmi_unified_process_ll_stats_clear_cmd() and
wmi_unified_process_ll_stats_get_cmd() pass the MAC address as a
separate parameter rather than adhering to the commonly used
unified signature: func(handle, param).
- Not all of the functions and data structures are correctly protected
by the WLAN_FEATURE_LINK_LAYER_STATS feature flag.
Refine the Link Layer Stats Unified API to address these issues.
This is co-dependent with Ifd7c8de2358121dae4752525ff57021a32be85d3
("qcacld-3.0: Use the refined Link Layer Stats Unified API").
Change-Id: Ifdc1fada55a559f3b3d0837ec20cceb653c45c40
CRs-Fixed: 2409293
In son_ol_send_null(), check for the return value of
GET_WMI_HDL_FROM_PSOC() before using it.
Also, pass argument of type wmi_unified_t in calls
to wmi_unified_stats_request_send().
Change-Id: Idfedae2fcbde6d18b1829adefcabac0adbc55859
CRs-Fixed: 2371368
Populate Spectral capability structure with scaling parameters
from extended service ready event parameters. Send the spectral caps
via cf80211 interface.
CRs-Fixed: 2379652
Change-Id: Id0372bdd40843c2101df32d2e71920027a24909f
Flag WLAN_FEATURE_NAN_CONVERGENCE was added to protect the
converged NAN code inside NAN Component. Since the original
NAN Discovery related code has now been moved inside NAN
component, keeping this flag separate doesn't make sense.
Combine this flag with WLAN_FEATURE_NAN flag which is the
original NAN feature flag.
Change-Id: I0045dcccd36524cbcd4253347c9e0a5704193c2b
CRs-Fixed: 2377393
The original implementation of the "get link status" feature contains
some design and implementation details that are not ideal, so fix the
following deficiencies:
- The link_status_params struct contains three fields that are unused.
- The only link_status_params field that is used, session_id, uses
legacy terminology instead of converged terminology
- The wmi_unified_link_status_req_cmd() implementation uses a void
pointer instead of the correct underlying type for the WMI handle.
Note that change I508ec083298caa45d4cbb1ba28b21e47e379a804
("qcacld-3.0: Align with revised "get link status" Unified WMI") is
interdependent with this change.
Change-Id: I057ca0aff4a627c7fcdb9f90a5da46473813f60a
CRs-Fixed: 2381364
