Enable the interrupt based processing in monitor mode
for WCN7850, by enabling MSI interrupts for rxdma
monitor destination ring.
Change-Id: Ia3c4456d28ed58c8ef49a7aa8e711076fbdf9415
CRs-Fixed: 3094129
In WCN7850, there is only one common RXDMA dst ring for
both the mac.
Add changes to process the common RXDMA dst ring for
status TLVs corresponding to either MAC monitor status
ring. Also use arch ops to get rx_desc from sw_cookie.
Change-Id: Ia2c004755bc4389b587d995286093a519b995cab
CRs-Fixed: 3084442
Refine dp pdev vdev stats updating function to non-inline to avoid kasan
building failure.
Change-Id: I896f28831198632c61735ccc10ed4aedb30a8232
CRs-Fixed: 3085365
Following peer stats are updated in per packet Rx path:
to_stack
multicast
broadcast
In BE architecture, HW provides the support for basic vdev stats and
hence per packet stats updation of above parameters can be done only
when enhanced stats is enabled or HW vdev offload stats is disabled.
Avoiding per packet stats updation reduces CPU load and improves KPI.
Change-Id: Id7c11c025a8464951b615a7f7b006ce61db487fc
CRs-Fixed: 3067843
Following peer stats are updated in per packet Tx completion path:
comp_pkt: Pkt Info for which completions were received
tx_failed: Total Tx failure
In BE architecture, HW provides the support for basic vdev stats and
hence per packet stats updation of above parameters can be done only
when enhanced stats is enabled or HW vdev offload stats is disabled.
Avoiding per packet stats updation reduces CPU load and improves KPI.
Change-Id: I7090d1a1ce0a882236e3310e3e9517149cbb146b
CRs-Fixed: 3067843
In ME6 we are currently using a workaround to send the native wifi packet
through the exception path, as the older HKv1 hardware didn’t support
single packet AMSDU. Since, the hardware is supporting this starting
from HKv2, we are sending ME packets as normal packets to FW with
DMS indication in Peer based meta for Beryllium.
Change-Id: Ic154b438df2c811c845e7c2eaadf252985d419ad
Prefetch RX HW desc, SW desc and SKB in pipeline
fasion in the first loop of RX processing.
This has improved TPUT by 200Mbps and provided a
10% gain in CPU (single core)
PINE with other optimizations: 3960Mbps @ 100% core-3
PINE + pipeline prefetch: 4130Mbps @ 90% core-3
Change-Id: I47f351601b264eb3a2b50e4154229d55da738724
Define a new cdp interface to fetch peer delay stats.
Define a new cdp interface to fetch peer jitter stats.
These interface APIs will be used by upper layers to fetch delay and
jitter stats per peer for telemetry stats feature.
Change-Id: I96ee6a861fa2626e7e1fba3df7df9ec64ff7e946
CRs-Fixed: 3071493
In case of successful transmission If MPDU tx
is retried more than the threshold then
increment MPDU retry count by transmit_cnt / threshold
Change-Id: Idbc7e2d0579ff68e272132fe4ffe9f951c4aacf5
CRs-Fixed: 3058464
Take care of the MLO peer bit indication to be
concatenated with peer_id to access the peer map
object.
Change-Id: Ia603a728101e83829a8906d1b847f42389e78ca6
CRs-Fixed: 3039326
Add dp functionality to collect stats for sysfs buffer.
Add both host and fw stats.
Change-Id: I64f84804d36cccec9d701925d96cc7ee96943b7a
CRs-Fixed: 3035864
Dump flow pool stats even for low verbosity level as
part of periodic stats display.
Change-Id: Iea59d20b0a81cfd0bfdac65ad54a11fa33f30f2f
CRs-Fixed: 3031168
Conditionally compile scan radio special vap stats.
Also rename spcl_vap to scan_spcl_vap to better reflect
funtionality.
Change-Id: I7d7f636209f6aa12cca0a3e808d7ae1fac9f397d
CRs-Fixed: 3009837
This patch adds the function dp_update_msdu_to_list to dp_mon_ops
struct. This is needed for supporting tx capture module in NSS
offload.
Change-Id: Id36aa6d1442eed4112585807e8798fc28ccdc424
-Add flag to inidicate special vap configuration
-Add frame type counters while processing tlv
WIFIRX_MPDU_START_E
-Add function to update special vap rx stats
-Add dp pdev param to enable/disable special vap
stats reset
-Add function to reset special vap stats
-Add fucntion to get special vap stats
-Add CDP function to retreive special vap stats
Change-Id: Ia5de6743e472dc86c9e66b9e789c909a57025e35
CRs-Fixed: 3005425
PATCH[7/7]:
This patch consists following changes:
-Conditionally compile all monitor destination ring related code
Macro used QCA_MONITOR_PKT_SUPPORT
-Add QCA_ENHANCED_STATS_SUPPORT macro to conditionally compile
enhanced stats support
-Use QCA_MCOPY_SUPPORT and QCA_TX_CAPTURE_SUPPORT macros
to conditionally compile MCOPY and Tx capture features
respectively
-Use QCN_IE macro to conditionally compile BPR
feature
-Use QCA_ADVANCE_MON_FILTER_SUPPORT macro to conditionally
compile advance monitor filter feature
-Fix vdev attach issue for special and smart monitor vap
-Fix status ring initialization issue.
Change-Id: I0deaa28a9a54bf34b0f41e6dd510fdd8d4992db2
CRs-Fixed: 2983780
PATCH[6/7]:
This patch consists following changes:
-Move monitor related pdev variables to struct dp_mon_pdev
-Move monitor relted soc variables to struct dp_mon_soc
-Move cookie to monitor link desc va to monitor file
-Add APIs to access monitor related variables
-Add dummy APIs to build without monitor support.
Change-Id: I032a480b1383d061f984cee3ba6b10ac7a0ff350
CRs-Fixed: 2983781
PATCH[5/7]:
This patch consists following changes:
-Monitor vdev context allocation while vdev attach and free
while vdev delete
-Monitor peer context allocation while peer create and free while
peer delete
-Move monitor vdev timer function to monitor file
-Move monitor reap timer handler function to monitor file
-Move monitor timer related variables to monitor file
-Add timer init/deinit and start/stop in monitor file.
Change-Id: I9c7910671d3678c53ca9ec44a57bc10e892008d9
CRs-Fixed: 2983994
PATCH[3/7]:
This patch consists following changes:
-Move struct cdp_mon_ops to dp monitor file
-Add new function for dp monitor soc cfg initialization
-Move full monitor mode function to dp monitor file
-Move vdev set monitor mode function to dp monitor file
-Move config debug sniffer function to dp monitor file
-Move set advance monitor filter function to dp monitor file
-Set monitor delayed replenish entries for target types
Change-Id: If8dac4eedc0c8eb4e956df34c7c3adae8712c840
CRs-Fixed: 2983939
When host receives BAR frames with OOR/2K jump in sequence
number it updates REO HW with new starting sequence number
and requests F.W to setup peer reorder queue. But REORDER_QUEUE_SETUP
is already requested to F.W as part of initial add BA in host.
So while handling OOR/2K jump BAR frames don't send
REORDER_QUEUE_SETUP to F.W
Change-Id: Idc3657e901dc792f699b53c45e4ae5133d286891
CRs-Fixed: 2981280
Currently dp_rx_err_process expects ring descriptor to be only
LINK_DESC_TYPE. In certain cases BUF_ADDR_TYPE ring descriptor is
observed in reo_exception ring. Add logic to handle the same.
Change-Id: I5baecc3f8eafc0830672b91bc9d9607b568a6cda
CRs-Fixed: 2954653
Move DP TX target specific functionality to dp/wifi3.0/be
and dp/wifi3.0/li folders. DP Functionality common to both lithium and
beryllium targets stays in dp/wifi3.0.
Change-Id: I3497284153e2ea30a9cb1faf05bd41422329b804
CRs-Fixed: 2891038
Register dp_peer_flush_frags API in dp peer ops
for flushing fragments for a particular peer.
Change-Id: Ia179d3160bdc306ec965c465134042c66a0c40a6
CRs-Fixed: 2874366
Issue1: Driver RTPM state is ON/NONE, Kernel state is RESUMING.
cdp_runtime_resume is already complete,
hif_pm_runtime_get return -E_INPROGRESS,
dp_tx_hw_enqueue will set the flush event,
but cdp_runtime_resume is already done,
this flush event will be handled only on next pkt tx.
Issue2: Driver RTPM state: Resuming
hif_pm_runtime_get returns -EBUSY,
dp_tx_hw_enqueue is interrupted by any IRQ,
cdp_runtime_resume is completed,
dp_tx_hw_enqueue will set the flush event,
This flush event will be handled only on next pkt tx.
Fix:
Introduce a link_state_up atomic variable in hif to track the link state
change by pld_cb.
Set atomic variable link_state_up=1 in pmo_core_psoc_bus_runtime_resume
just after pld_cb. pld_cb brings the PCIe bus out of suspend state.
Set atomic variable link_state_up=0 in pmo_core_psoc_bus_runtime_suspend
just before pld_cb. pld_cb puts the PCIe bus into suspend state.
Introduce dp_runtime_get and dp_runtime_put.
dp_runtime_get get refcount with increment of an atomic variable.
dp_runtime_put return refcount with decrement of this atomic variable.
If hif_pm_runtime_get returns -EBUSY or -EINPROGRESS,
take the dp runtime refcount using dp_runtime_get,
check if the link state is up, write TX ring HP,
return the dp runtime refcount using dp_runtime_put.
cdp_runtime_suspend should reject the suspend, if dp_runtime_get is non
zero.
cdp_runtime_resume should wait until dp_runtime_get becomes zero or time
out, then flush pending tx for runtime suspend.
Change-Id: I5b97d50cba710082f117f3845f7830712b86cda7
CRs-Fixed: 2844888
When runtime power management is enabled, until the system is fully
resumed, we do not post any message to CE, instead they will be queued
in HTC. Once the device is fully resumed, all HTT messages in the queues
will be downloaded to CE at once. In some corner cases, it is found that
too many FSE caches flush messages getting queued during the runtime
resume; once the device is fully resumed, all these would be downloaded
to the FW/HW at once causing unintended crashes.
Avoid posting FSE cache flush messages until the device is fully resumed
to fix the issue.
Change-Id: I2be21406e8c7a9dcd86df3e93c2568797defcad0
CRs-Fixed: 2843541
Add logic to exclude dp peer stats from
dp vdev stats if wds extended is enabled.
Change-Id: I1a5a1794e04f90877916f92b7f4216a525ce6cce
CRs-Fixed: 2778199
1. Register peer->osif_peer for per-STA netdevice delivery.
2. Wi-Fi 3-address frame packets received would be processed
through AP netdevice.
3. Wi-Fi 4-address frame packets received would be processed
through per-STA netdevice.
Change-Id: I102874ea1de9fba40ab7f0e2c32c9de1c9b4d075
While preparing raw packets for transmission, the count
of nbuf belonging to one mpdu must be less than the
number of segments.This makes sure the frags array inside
seg_info does not go out of bounds.
Change-Id: I7fffba7f64da274aa73c558cfc63d90f4419a04d
CMEM FSE details like offset into CMEM where flow search table(FST)
is allocated and the size of the FST will be sent by the firmware
in response to FSE setup message. Adding the logic to parse the
response message and update the CMEM parameters in the SW FST.
Change-Id: Id1dd4b59be02c175da3fc6fcb5ed56e6f491133a
CRs-Fixed: 2771187
Drop frame if it is not for the vap, to which
client is connected.
Enable this check only for ap.
Change-Id: I33d7eb79267490bdb8697e4e45f789e9f6279f0e
CRs-Fixed: 2756304
- Added data structure for wds ext peer
- Enhanced DP peer structure to maintain
wds ext peer data structure, which inturn
maintain pointer to osif device.
- Enhanced DP vdev structure to maintain feature
configuration, which will be updated during vdev
creation when feature is flag is set at control
psoc.
- Enhanced cdp_vdev_param_type and cdp_config_param_t
to set wds ext configuration into DP vdev
- Enhanced cdp_cmn_ops structure and corresponding
call back definitons to get peer id, which will
be saved in osif private structure and to set
wds ext peer rx.
- Enhanced cdp_ctrl_ops to send event to control
path when 1st 4 address frame is received from
backhaul.
Change-Id: Ide0ea54e7b2d480ad646fb84b6e4e3108930f986
CRs-Fixed: 2773492
There's no declaration for API dp_peer_qos_stats_notify().
Define the API as "static inline".
Change-Id: Id6769d680b3304cebf00b2348fb5b9a3bc9c7368
CRs-Fixed: 2773655
Debugfs support for HTT stats under compile
time flag "HTT_STATS_DEBUGFS_SUPPORT".
Change-Id: I44c4f11265fdb3b9d53a9ac545e2945854bb9a57
CRs-Fixed: 2760947
Add logic to pre-allocate DP consistent memory and reuse later
on wifi on/off. This prevents memory fragmentation.
Change-Id: I1e5eb0da39950a5d028dd46d38ff715f283e53ff
CRs-Fixed: 2740889
