Enable Low Power Mode for the power supplies while
going to suspend mode on wsa883x and wcd9378.
Change-Id: I133c1b791bcd8b53cf79650d7347d5889da29491
Signed-off-by: Sarath Varma Ganapathiraju <quic_ganavarm@quicinc.com>
when we enable compander for headphones, the quality
of hph playback is bad, since we have not disconnect
the right port, correct it.
Change-Id: I63ab0734870027109a7f032c47f8865083374a5b
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
when amic4 recording start, sys_usage_bit get failed,
since the mask of read val is incorrect.
Change-Id: I4c6bdaf6cafdd133e272bcacfd2faea5f176f9ab
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Optimize the init sequence for tambora, enable TXSCBIAS_CLK
and set IBIAS_LDO_DRIVER as 5ua.
Change-Id: I639b7051d03d167972f592b155072260d4e02aec
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Update the hph/ear/aux playback sequence, disable the reg
which should be disable.
Change-Id: Ib1353e686a49222f5084722cced7687815f76ab2
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Tear down the correct REQ_PS when widget power down,
that can fix the amic3 mute after ssr issue.
Change-Id: I7b5c958e79eb23184bd11375bae11dbcd51e961a
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Update the micbias enable logic for tambora,
and add some widgets to switch between amic and
va amic.
Change-Id: I2c9a7658d79a7c9d255884df7b81aa8062185d72
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Remove test reg configuration from init_reg func to
avoid pop noise in hph playback with comp enable.
Change-Id: I7c49d224e92c28cfdd2e971095ac5e6fa6db14c9
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
To enable datapath control for both HPH_L and HPH_R in
HPH sequencer. Which is used to fix the single channel
mute issues.
Change-Id: I1d9fb22255a2895fc2543ef5c3de02f0bdb9999d
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Move scp1_val and scp2_val into swr_device struct and
reset this two value after ssr.
Change-Id: I549f7438f034a2de0e556bd749594fbe5db2a21e
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Clk vote is present after teardown the usecase. which
is impacting the power, in SND_PMD call swr disconnect
to avoid clk votes.
Change-Id: I94d1ab9dc19a62132033a5715d4212dbcb7d2b0b
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Defer the probe when the msm cdc pinctrl driver is not prode.
Change-Id: I3ace42632601a8ef010363f23534471e99c0f827
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Optimize the power down logic of hph playback widget.
Change-Id: Ic6d085e70cb36cdc99bcbceddbce3aff2bc54ad6
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Remove swr clk set from analog side.
Optimize the debug log.
Change-Id: I8c3a946f1c64fd5d71fd5151c4c464d370b4ae8c
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Optimize the micbias usage set logic in tambora driver.
Change-Id: I77224f66f12e129f00708a531c1aab137aee7000
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
