During some concurrencies even though we are not
enabling the swrm port, we are trying to disable it.
which causes problem w.r.t clock disablement,
To avoid that we are updating the set bit only
when port is enabled, based on that bit we are taking
decision to disable or enable the port.
Change-Id: I6707c56c40dd3716917edc097c4b7bcad68261fd
Signed-off-by: Ganapathiraju Sarath Varma <quic_ganavarm@quicinc.com>
Add check to validate bat cfg,
bat cfg register read compared to dts read
Change-Id: Ib62ae3b3535a75dbc7c71b2b2ac3752fb2e61156
Signed-off-by: Shazmaan Ali <quic_shazmaan@quicinc.com>
Update equation that converts from the PBR table to
the correct register value.
Improve accuracy of truncation by moving the division
into one operation at the end of the formula and adding 1.
Update a few table values that were copied incorrectly.
Change-Id: I685c02778468e910820a90e2de216e0daf2491ac
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
For PBR and CPS ports, need the ability to customized slave
SWR frame OFFSET1 settings. Add similar method to WCD TX where
offset1 and lane_ctrl parameters are parsed from WSA device tree
and configured in SWRM.
Change-Id: Ib973ed93d9daa5ba02461a156e5b0a8c816d371e
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Read noise gate mode from device tree,
set NG2 based on the register read or
set to idle detect mode
Change-Id: Id1e478ad230125d1e35229493cb0fbd6867c6a3b
Signed-off-by: Shazmaan Ali <quic_shazmaan@quicinc.com>
Lpass-side enablement of new WSA feature.
Configure PBR registers based on WSA bat_cfg/rload/sys_gain.
Some registers updated during init, others during enable_interpolator.
Change-Id: Iac42672182827a9da47700319c61b9d0a17d0936
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Change PBR enable to be acquired from device tree.
Using system_gain, bat_cfg, rload, set pbr thresholds based on tables.
Table values are x100 to avoid kernel float issues,
truncate when converting to reg val.
Set pbr registers during initialization.
Rename WSA_8OHMS -> WSA_8_OHMS to match system gain naming.
Change-Id: I28985496e1da37ceeb8c9db6e17f4c48d37d11c7
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Update WSA rload, system gain, bat_cfg to get from wsa_macro device tree.
WSA Bat_cfg change to read from VPHX_SYS_EN_STATUS reg.
Add device tree parsing for these params in WSA macro
and WSA driver.
Remove machine driver method of sending the parameters.
Add default_dev_mode (spkr vs rcv) from device tree for WSA.
Move code from spkr event to userspace controls or probe.
Change system_gain and affected params when switching between
dev_modes.
These changes simplify configuration data and code and allow
more registers to be written during bootup or before playback.
Change-Id: I79966c704adfac1bf2d85aa6519ea574764c7a8b
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
during devm_snd_soc_register_card(), the name_prefix can be set
if "sound-name-prefix" is provided in the DT nodes.
The original approach to set prefix would possibly cause ASoC
component probe failed if prefix has not set before probe is called
Change-Id: Ie78d042cda24b7d1d926223d476786e13d965ac7
Signed-off-by: Junkai Cai <quic_junkai@quicinc.com>
Conforms to latest hardware DRE documentation
Change-Id: Ia08b03f519697723e9e260451c5bc68b4b45724c
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
Driver implementation for WSA884X.
Use new script to generate register files.
Modify register naming convention.
Add wsa884x-reg-masks.h and wsa884x-reg-shifts.h
Reverting copyrights to 2019 for wsa884x.h file
Change-Id: Ic3652d6138a2f62ba59a36d4307c732ab6e8db89
Signed-off-by: Shazmaan Ali <shazmaan@codeaurora.org>
