As the IPA component has moved out of kernel,
WLAN currently does not have access to the IPA
header files that was previously part of kernel.
To resolve this, WLAN needs to include the path
to IPA header files, for successful compilation when
IPA_OFFLOAD is enabled. With this Kbuild change
now WLAN can support OUT-OF-TREE IPA module.
Change-Id: I56f66d3e7d7648ece5aeb68de1af7c0c5f59f84d
CRs-Fixed: 3482432
Currently ol rx thread code is under QCA_CONFIG_SMP macro, which is
enabled for all the targets. But LI, BE and RH family targets don't
use this ol rx thread implementation. Hence, compile out ol rx thread
code for LI, BE and RH targets.
Change-Id: I1a1dfd09f5364ddb519c846e6c456d10f81e369c
CRs-Fixed: 3468499
Currently when DWARFv5 is enabled, wlan driver compilation fails
with error, INT DW_ATE_unsigned_1024 Error emitting BTF type.
To unblock this compilation issue, temporarily switch
back to DWARFv4.
Change-Id: I2e37aff054e8a6161a80e97a227153eb2df68a74
CRs-Fixed: 3475979
Currently in defconfig files, the naming convention of
config flags BUILD_DIAG_VERSION and BUILD_DEBUG_VERSION
is not aligning with rest of them. So, rename the flags
to CONFIG_WLAN_DIAG_VERSION and CONFIG_WLAN_DEBUG_VERSION
Change-Id: Ia9357588cdbfc09199d7d44bd024beb0f92b9755
CRs-Fixed: 3472570
Cleanup TDLS concurrencies feature flag and move it to
end of Kbuild file where cc_flags are defined.
Change-Id: I26ffe1f339fc286be5d2f235c7b9fe7efa530e42
CRs-Fixed: 3468341
Currently the Debug Log DebugFS functionality in the qca-wifi-host-cmn
project is protected with #ifdef WLAN_OPEN_SOURCE.
The WLAN_OPEN_SOURCE macro was introduced for a legacy reason that is
no longer applicable. In order to remove the WLAN_OPEN_SOURCE macro,
introduce a new feature-specific WLAN_DBGLOG_DEBUGFS feature flag.
Once the Debug Log DebugFS functionality moves to the new flag, the
WLAN_OPEN_SOURCE macro can be removed.
Change-Id: I159af54ab91d009e5bf50d67492cbc62a05bad47
CRs-Fixed: 3463793
Currently Kbuild uses both cppflags-y and ccflags-y, The kernel Kbuild
documentation recommends using ccflags-y, so consistently use that
everywhere.
Change-Id: Ic5f86bad5d4260f39f98b5ce1b56ba6a69606aa9
CRs-Fixed: 3463792
Currently the Kbuild adds "-Wall -Werror" to the C command line.
However, the kernel already adds these by default, so stop adding the
duplicates.
Change-Id: I8d0b777feafd726ab29278739ac20bcaf0f7f000
CRs-Fixed: 3463791
Currently in Kbuild most of the feature flags, but not all of them,
are set in one place. In order to make the Kbuild more maintainable,
and in preparation for future refactoring, consolidate all of the
feature flag setting in one place.
Change-Id: Ie7bcf67304990991f555b0bdd93f3ad38b52bddd
CRs-Fixed: 3463790
In some build environments the length of the C compiler command line
exceeds the maximum length of the underlying shell, resulting in the
shell reporting: Argument list too long.
Kbuild has many definitions which add -D switches to the C compiler
command line to define macros to be used for conditional compilation.
Most of these are set conditionally, but there are some that are set
unconditionally.
As one step in the process of shortening the command line, refactor
the macros that are set unconditionally out of Kbuild, and put them in
a separate .h file which is then included in every build. As long as
the added -include switch takes up less room than the sum of the -D
switches, then this will result in a shorter command line.
Change-Id: I95e0e8237d15dee58e519ea526a74c52eeb7dbd2
CRs-Fixed: 3460064
Componentization is complete, therefore, TWT component
should be used whenever TWT is enabled. Replace CONFIG_WLAN_TWT_CONVERGED
with CONFIG_WLAN_FEATURE_TWT to always enable component for TWT.
Change-Id: I849387c751a6d5f1c6d338ac9c2dfdb72244c137
CRs-Fixed: 3300364
To support multiple links in single adapter, create a new
structure to hold per link info inside the hdd_adapter.
Create a new member in hdd_adapter to point to link zero
of this array of link info.
Move STA and AP context fields into per link info.
Change-Id: Ia1f01865277c3e08254f44a39ba6675a9fea6c65
CRs-Fixed: 3354572
Add support to compile new dp_rings_main.c file.
This new file is having refactored code of all the DP rings.
Change-Id: I7cd467df8d3f7c4b60d448c88b5cedc76cd62b07
CRs-Fixed: 3423636
WEXT ioctls are no longer supported by the wlan driver.
So, add a sysfs replacement to setdfsnol and getdfsnol commands.
file path: sys/class/net/wlanxx/dfsnol
where wlanxx is the adapter interface
usage: echo arg_0 > /sys/class/net/wlanxx/dfsnol
cat /sys/class/net/wlanxx/dfsnol
Change-Id: Ia8475b5c6ef39142def38eab0e777840af885c33
CRs-Fixed: 3431517
Update puncture bitmap along with channel to upper layer when channel
or puncture bitmap changed.
Change-Id: Idc0ffbd4358c328ba22453c6b523843c8d4fc486
CRs-Fixed: 3436336
Current code doesn't allow output of hdd_dump_log_buffer to sysfs.
Fix this by adding sysfs output functionality.
Change-Id: I077c10e379e542ac99d8ebe01d68fe76a7470e39
CRs-Fixed: 3426193
Export CONFIG_ENABLE_VALLOC_REPLACE_MALLOC to
make it configurable while need to replace malloc
with valloc for some big size memory request case.
Change-Id: I8d138f3b4565aa2d6d5efde531560dafeb906106
CRs-Fixed: 3429232
Current code allows for viewing Runtime PM stats via debugfs only.
Fix this by adding sysfs viewing functionality.
Change-Id: I2b439f0bb608292dc1390a5529f9dc287b7262bc
CRs-Fixed: 3414306
Cache roam information in wlan driver, when qca vendor
cmd of QCA_NL80211_VENDOR_SUBCMD_ROAM_STATS get roam
information, driver send all the cached information to
user space.
Extend WMI_ROAM_STATS_EVENTID event information for
requirement of:
1.Roam trigger related information, include timestamp,
trigger reason, trigger condition, abort reason,
scan type, roam status and fail reason.
2.Roam scan related information, include scan channel
number, dwell type, max dwell time of each channel
and total scan time.
3.all types of roam related frame information, include
timestamp and successful or failed status for Preauth,
Reassoc, EAPOL-M1/M2/M3/M4.
Change-Id: I2a694b7c1df8f5da09505f65c9c797be2177b398
CRs-Fixed: 3391601
This change disables IPA offload and optional
wifi datapath feature. This change will be used
until kernel changes are merged.
Change-Id: Ib47d69ba8da2e1fa3f0a1bd05926bbf3d74f51e4
CRs-Fixed: 3401190
Change absolute path to relative to fix below compile
issue for yocto system:
make[4]: /bin/sh: Argument list too long
And just need to do like this in the bb recipes files:
1. set LINUX_BUILD_TOP="${WORKDIR}/WLANSRC"
2. keep WLAN_ROOT=""
Change-Id: I2f03eb9aa5501eae887b41b4e6a134b55da16462
CRs-Fixed: 3408645
Once the radar is found, identify the affected sub 20 MHz channels in the
current channel. From the position(s) of the sub 20 MHz subchannels, find
the nearest valid puncturing pattern.
If a valid puncturing pattern is found, find the corresponding reduced
bandwidth new channel for the legacy ( <= 11AX) devices and send CSA. At
the end of CSA, do a vdev restart so that the 11BE devices see a new
puncturing pattern.
And If not found, then fallback to the default behavior of changing channel
using Random channel selection.
Change-Id: I41e6206f310722bc3dacc9ce8d024f679ff1af3e
CRs-Fixed: 3386022
In very noisy environment and with 6 GHz co-located AP, scan
database size of 300 might not be enough.
So increase the size to 500.
Change-Id: I26077b2ab0d24f73a7c8e29990504d5b284eccf4
CRs-Fixed: 3395834
Remove WLAN_ENABLE_AGEIE_ON_SCAN_RESULTS macro as BSS age
is calculated using NL80211_BSS_SEEN_MS_AGO
Change-Id: I5473f9cea216df4968a43551875b0385605f616f
CRs-Fixed: 3391078
Add critical update feature code. If BSS parameters change
count (BPCC) is changed, the value of cu_flag returns from
function lim_check_cu_happens is true. It can try to update
the critical update IEs code logic per cu_flag.
Change-Id: I39445a75e747e6e00a29be726fd447b9fbc7fb17
CRs-Fixed: 3296181
Current code does not use the SSR host log collection API.
Fix this by adding SSR host log collection API usage.
Change-Id: I364bd6281e886e8c50dfd6f45f78fb98e822f962
CRs-Fixed: 3339953
When component dependent functions calling from higher
modules or any other components, it uses ucfg APIs pattern.
Calling ucfg dependent APIs is acceptable for higher modules
like HDD, OSIF but for another components like DP to avoid
using ucfg APIs here, implementing component APIs for existing
ucfg APIs to other components like NAN, vdev_mgr in DP
component module.
Change-Id: Ia5431c7de7fc944aacf5c8a328072a8ec31e8f3f
CRs-Fixed: 3351496
Create sysfs file for direct link unit test command to
generate traffic from LPASS.
Add ini to enable direct link unit testing.
Change-Id: I5b143bc6751eedb1a65cd836ea738744b72cc2cc
CRs-Fixed: 3365576
Enable the feature CNSS HW Secure Disable only when
CONFIG_CNSS_HW_SECURE_DISABLE is enabled.
Change-Id: Ib0e01360f8ee9390290487c097c3d821f17485f8
CRs-Fixed: 3360826
Fix issue that driver doesn't report puncture cap to kernel and hostapd for
undefined MACRO.
Enable a new build flag CFG80211_RU_PUNCTURE_SUPPORT when kernel code
contains nl80211_put_ru_punct_supp_bw.
Change-Id: Ib375c248065b4899f2d336155b1f71a5359e6fb7
CRs-Fixed: 3356751
Currently wlan_mlme_configure_chain_mask API sends many
pdev set param commands separately to firmware.
Combine all pdev set params of wlan_mlme_configure_chain_mask
send to WMI to reduce number of transactions.
Also replace target wmi pdev params with host wmi
pdev params to fix existing broken layering
violation.
Change-Id: If0b7bce9a7c87d0f07e7a9f1d2cd80139f027308
CRs-Fixed: 3151438
Enable the WAR to handle incorrect setting of first msdu
in mpdu flag for an mpdu with more than 6 msdu.
Change-Id: I7f7219828f2787b889a26092476bd76b97dee149
CRs-Fixed: 3363780
Add AFC common include path to regulatory include path.
Enable AFC feature for sdxlemur.
Change-Id: I6b936b3f6443868f05cf86351bcf31d24d65bbbc
CRs-Fixed: 3154178
set CONFIG_DP_TX_COMP_RING_DESC_SANITY_CHECK for Def build to
enable TX completion ring desc sanity check.
Change-Id: Ia9cd28f6bcce234d0e7bf7f621cc33208479e899
CRs-Fixed: 3349744
