qcacld-3.0: Add defconfig and Kbuild changes for WCN6450

Add wcn6450_defconfig configuration file and corresponding
Kbuild changes for WCN6450 platform.

Change-Id: I7189e718aac427f76a251284799ec2169b2495a8
CRs-Fixed: 3382931

Kbuild

@@ -1066,6 +1066,10 @@ cppflags-y += -DCONFIG_BERYLLIUM
 cppflags-y += -DDP_OFFLOAD_FRAME_WITH_SW_EXCEPTION
 endif
 
+ifeq ($(CONFIG_RHINE), y)
+cppflags-y += -DCONFIG_RHINE
+endif
+
 cppflags-$(CONFIG_TALLOC_DEBUG) += -DWLAN_TALLOC_DEBUG
 cppflags-$(CONFIG_QDF_TEST) += -DWLAN_DELAYED_WORK_TEST
 cppflags-$(CONFIG_QDF_TEST) += -DWLAN_HASHTABLE_TEST
@@ -2106,7 +2110,7 @@ ifeq ($(CONFIG_WDI_EVENT_ENABLE), y)
 TXRX_OBJS += 	$(TXRX_DIR)/ol_txrx_event.o
 endif
 
-ifneq (y,$(filter y,$(CONFIG_LITHIUM) $(CONFIG_BERYLLIUM)))
+ifneq (y,$(filter y,$(CONFIG_LITHIUM) $(CONFIG_BERYLLIUM) $(CONFIG_RHINE)))
 TXRX_OBJS += $(TXRX_DIR)/ol_txrx.o \
 		$(TXRX_DIR)/ol_cfg.o \
                 $(TXRX_DIR)/ol_rx.o \
@@ -2156,11 +2160,11 @@ endif
 ifeq ($(CONFIG_QCA_SUPPORT_TX_THROTTLE), y)
 TXRX_OBJS +=     $(TXRX_DIR)/ol_tx_throttle.o
 endif
-endif #LITHIUM/BERYLLIUM
+endif #LITHIUM/BERYLLIUM/RHINE
 
 $(call add-wlan-objs,txrx,$(TXRX_OBJS))
 
-ifeq (y,$(filter y,$(CONFIG_LITHIUM) $(CONFIG_BERYLLIUM)))
+ifeq (y,$(filter y,$(CONFIG_LITHIUM) $(CONFIG_BERYLLIUM) $(CONFIG_RHINE)))
 ############ DP 3.0 ############
 DP_INC := -I$(WLAN_COMMON_INC)/dp/inc \
 	-I$(WLAN_COMMON_INC)/dp/wifi3.0 \
@@ -2171,20 +2175,23 @@ DP_INC := -I$(WLAN_COMMON_INC)/dp/inc \
 
 DP_SRC := $(WLAN_COMMON_ROOT)/dp/wifi3.0
 DP_OBJS := $(DP_SRC)/dp_main.o \
-		$(DP_SRC)/dp_rings_main.o \
 		$(DP_SRC)/dp_tx.o \
 		$(DP_SRC)/dp_arch_ops.o \
 		$(DP_SRC)/dp_tx_desc.o \
 		$(DP_SRC)/dp_rx.o \
-		$(DP_SRC)/dp_rx_err.o \
 		$(DP_SRC)/dp_htt.o \
 		$(DP_SRC)/dp_peer.o \
 		$(DP_SRC)/dp_rx_desc.o \
-		$(DP_SRC)/dp_reo.o \
 		$(DP_SRC)/dp_rx_defrag.o \
 		$(DP_SRC)/dp_stats.o \
 		$(WLAN_COMMON_ROOT)/target_if/dp/src/target_if_dp.o
 
+ifneq ($(CONFIG_RHINE), y)
+DP_OBJS += $(DP_SRC)/dp_rings_main.o
+DP_OBJS += $(DP_SRC)/dp_reo.o
+DP_OBJS += $(DP_SRC)/dp_rx_err.o
+endif
+
 ifeq ($(CONFIG_WIFI_MONITOR_SUPPORT), y)
 DP_OBJS += $(DP_SRC)/monitor/dp_mon.o \
 		$(DP_SRC)/monitor/dp_mon_filter.o \
@@ -2209,6 +2216,13 @@ DP_OBJS += $(DP_SRC)/li/dp_li_tx.o
 DP_OBJS += $(DP_SRC)/li/dp_li_rx.o
 endif
 
+ifeq ($(CONFIG_RHINE), y)
+DP_OBJS += $(DP_SRC)/rh/dp_rh.o
+DP_OBJS += $(DP_SRC)/rh/dp_rh_tx.o
+DP_OBJS += $(DP_SRC)/rh/dp_rh_rx.o
+DP_OBJS += $(DP_SRC)/rh/dp_rh_htt.o
+endif
+
 ifeq ($(CONFIG_WLAN_TX_FLOW_CONTROL_V2), y)
 DP_OBJS += $(DP_SRC)/dp_tx_flow_control.o
 endif
@@ -2243,7 +2257,7 @@ WCFG_DIR := wlan_cfg
 WCFG_INC := -I$(WLAN_COMMON_INC)/$(WCFG_DIR)
 WCFG_SRC := $(WLAN_COMMON_ROOT)/$(WCFG_DIR)
 
-ifeq (y,$(filter y,$(CONFIG_LITHIUM) $(CONFIG_BERYLLIUM)))
+ifeq (y,$(filter y,$(CONFIG_LITHIUM) $(CONFIG_BERYLLIUM) $(CONFIG_RHINE)))
 WCFG_OBJS := $(WCFG_SRC)/wlan_cfg.o
 endif
 
@@ -2282,7 +2296,7 @@ $(call add-wlan-objs,pktlog,$(PKTLOG_OBJS))
 HTT_DIR :=      core/dp/htt
 HTT_INC :=      -I$(WLAN_ROOT)/$(HTT_DIR)
 
-ifneq (y,$(filter y,$(CONFIG_LITHIUM) $(CONFIG_BERYLLIUM)))
+ifneq (y,$(filter y,$(CONFIG_LITHIUM) $(CONFIG_BERYLLIUM) $(CONFIG_RHINE)))
 HTT_OBJS := $(HTT_DIR)/htt_tx.o \
             $(HTT_DIR)/htt.o \
             $(HTT_DIR)/htt_t2h.o \
@@ -2594,7 +2608,7 @@ ifeq ($(CONFIG_DP_SWLM), y)
 WLAN_DP_COMP_OBJS += $(DP_COMP_CORE_DIR)/wlan_dp_swlm.o
 endif
 
-ifeq (y,$(filter y,$(CONFIG_LITHIUM) $(CONFIG_BERYLLIUM)))
+ifeq (y,$(filter y,$(CONFIG_LITHIUM) $(CONFIG_BERYLLIUM) $(CONFIG_RHINE)))
 WLAN_DP_COMP_OBJS += $(DP_COMP_CORE_DIR)/wlan_dp_prealloc.o
 endif
 
@@ -2923,18 +2937,19 @@ endif
 $(call add-wlan-objs,hif,$(HIF_OBJS))
 
 ############ HAL ############
-ifeq (y,$(filter y,$(CONFIG_LITHIUM) $(CONFIG_BERYLLIUM)))
+ifeq (y,$(filter y,$(CONFIG_LITHIUM) $(CONFIG_BERYLLIUM) $(CONFIG_RHINE)))
 HAL_DIR :=	hal
 HAL_INC :=	-I$(WLAN_COMMON_INC)/$(HAL_DIR)/inc \
 		-I$(WLAN_COMMON_INC)/$(HAL_DIR)/wifi3.0
 
+#TODO fix hal_reo for RHINE
 HAL_OBJS :=	$(WLAN_COMMON_ROOT)/$(HAL_DIR)/wifi3.0/hal_srng.o \
 		$(WLAN_COMMON_ROOT)/$(HAL_DIR)/wifi3.0/hal_reo.o
 
 ifeq ($(CONFIG_RX_FISA), y)
 HAL_OBJS += $(WLAN_COMMON_ROOT)/$(HAL_DIR)/wifi3.0/hal_rx_flow.o
 endif
-endif #### CONFIG LITHIUM/BERYLLIUM ####
+endif #### CONFIG LITHIUM/BERYLLIUM/RHINE ####
 
 ifeq ($(CONFIG_LITHIUM), y)
 HAL_INC += 	-I$(WLAN_COMMON_INC)/$(HAL_DIR)/wifi3.0/li
@@ -2977,6 +2992,21 @@ endif
 
 endif #### CONFIG_BERYLLIUM ####
 
+ifeq ($(CONFIG_RHINE), y)
+HAL_INC += 	-I$(WLAN_COMMON_INC)/$(HAL_DIR)/wifi3.0/rh
+
+HAL_OBJS +=	$(WLAN_COMMON_ROOT)/$(HAL_DIR)/wifi3.0/rh/hal_rh_generic_api.o
+
+ifeq ($(CONFIG_CNSS_WCN6450), y)
+#TODO fix this for RHINE
+HAL_INC += -I$(WLAN_COMMON_INC)/$(HAL_DIR)/wifi3.0/wcn6450
+HAL_OBJS += $(WLAN_COMMON_ROOT)/$(HAL_DIR)/wifi3.0/wcn6450/hal_wcn6450.o
+else
+#error "Not RHINE"
+endif
+
+endif #####CONFIG_RHINE####
+
 $(call add-wlan-objs,hal,$(HAL_OBJS))
 
 ############ WMA ############
@@ -3105,6 +3135,10 @@ ifeq ($(CONFIG_CNSS_QCA6750), y)
 TARGET_INC +=	-I$(WLAN_FW_API)/hw/qca6750/v1
 endif
 
+ifeq ($(CONFIG_CNSS_WCN6450), y)
+TARGET_INC +=	-I$(WLAN_FW_API)/hw/wcn6450/v1
+endif
+
 ifeq ($(CONFIG_CNSS_PEACH), y)
 TARGET_INC +=	-I$(WLAN_FW_API)/hw/peach/v1/
 else
@@ -3162,7 +3196,7 @@ INCS +=		$(HIF_INC) \
 		$(BMI_INC) \
 		$(CMN_SYS_INC)
 
-ifeq (y,$(filter y,$(CONFIG_LITHIUM) $(CONFIG_BERYLLIUM)))
+ifeq (y,$(filter y,$(CONFIG_LITHIUM) $(CONFIG_BERYLLIUM) $(CONFIG_RHINE)))
 INCS += 	$(HAL_INC) \
 		$(DP_INC)
 endif
@@ -3320,6 +3354,9 @@ cppflags-$(CONFIG_WMI_DBR_SUPPORT) += -DWMI_DBR_SUPPORT
 ifneq ($(CONFIG_CNSS_QCA6750), y)
 cppflags-$(CONFIG_DIRECT_BUF_RX_ENABLE) += -DDBR_MULTI_SRNG_ENABLE
 endif
+ifneq ($(CONFIG_CNSS_WCN6450), y)
+cppflags-$(CONFIG_DIRECT_BUF_RX_ENABLE) += -DDBR_MULTI_SRNG_ENABLE
+endif
 cppflags-$(CONFIG_WMI_CMD_STRINGS) += -DWMI_CMD_STRINGS
 cppflags-$(CONFIG_WLAN_FEATURE_TWT) += -DWLAN_SUPPORT_TWT
 ifeq ($(CONFIG_WLAN_FEATURE_11BE_MLO), y)
@@ -4054,9 +4091,15 @@ cppflags-$(CONFIG_QCA6750_HEADERS_DEF) += -DQCA6750_HEADERS_DEF
 cppflags-$(CONFIG_QCA_WIFI_QCA6390) += -DQCA_WIFI_QCA6390
 cppflags-$(CONFIG_QCA6490_HEADERS_DEF) += -DQCA6490_HEADERS_DEF
 cppflags-$(CONFIG_KIWI_HEADERS_DEF) += -DKIWI_HEADERS_DEF
+cppflags-$(CONFIG_WCN6450_HEADERS_DEF) += -DWCN6450_HEADERS_DEF
 cppflags-$(CONFIG_QCA_WIFI_QCA6490) += -DQCA_WIFI_QCA6490
 cppflags-$(CONFIG_QCA_WIFI_QCA6750) += -DQCA_WIFI_QCA6750
 cppflags-$(CONFIG_QCA_WIFI_KIWI) += -DQCA_WIFI_KIWI
+cppflags-$(CONFIG_QCA_WIFI_WCN6450) += -DQCA_WIFI_WCN6450
+cppflags-$(CONFIG_QCA_WIFI_WCN6450) += -DWLAN_40BIT_ADDRESSING_SUPPORT
+cppflags-$(CONFIG_QCA_WIFI_WCN6450) += -DWLAN_64BIT_DATA_SUPPORT
+cppflags-$(CONFIG_CE_LEGACY_MSI_SUPPORT) += -DCE_LEGACY_MSI_SUPPORT
+cppflags-$(CONFIG_HIF_HAL_REG_ACCESS_SUPPORT) += -DHIF_HAL_REG_ACCESS_SUPPORT
 cppflags-$(CONFIG_CNSS_KIWI_V2) += -DQCA_WIFI_KIWI_V2
 cppflags-$(CONFIG_CNSS_MANGO) += -DQCA_WIFI_MANGO
 cppflags-$(CONFIG_CNSS_PEACH) += -DQCA_WIFI_PEACH
@@ -4115,6 +4158,9 @@ cppflags-$(CONFIG_MON_ENABLE_DROP_FOR_NON_MON_PMAC) += -DMON_ENABLE_DROP_FOR_NON
 cppflags-$(CONFIG_DP_WAR_INVALID_FIRST_MSDU_FLAG) += -DDP_WAR_INVALID_FIRST_MSDU_FLAG
 cppflags-$(CONFIG_LITHIUM) += -DDISABLE_MON_RING_MSI_CFG
 cppflags-$(CONFIG_LITHIUM) += -DFEATURE_IRQ_AFFINITY
+cppflags-$(CONFIG_RHINE) += -DDISABLE_MON_RING_MSI_CFG
+cppflags-$(CONFIG_RHINE) += -DFEATURE_IRQ_AFFINITY
+cppflags-$(CONFIG_RHINE) += -DWLAN_SOFTUMAC_SUPPORT
 cppflags-$(CONFIG_BERYLLIUM) += -DFEATURE_IRQ_AFFINITY
 cppflags-$(CONFIG_TX_MULTIQ_PER_AC) += -DTX_MULTIQ_PER_AC
 cppflags-$(CONFIG_PCI_LINK_STATUS_SANITY) += -DPCI_LINK_STATUS_SANITY

configs/wcn6450_defconfig

@@ -0,0 +1,802 @@
+CONFIG_CNSS_WCN6450 := y
+
+#DP configs
+CONFIG_WLAN_DP_DISABLE_TCL_CMD_CRED_SRNG := y
+CONFIG_WLAN_DP_DISABLE_TCL_STATUS_SRNG := y
+CONFIG_REO_DESC_DEFER_FREE := n
+
+CONFIG_HANDLE_RX_REROUTE_ERR := y
+
+#Enable DP Bus Vote
+CONFIG_WLAN_FEATURE_DP_BUS_BANDWIDTH := y
+
+ifeq ($(CONFIG_CNSS_EMULATION), y)
+	CONFIG_QCA_WIFI_EMULATION := y
+endif
+CONFIG_RHINE := y
+CONFIG_WLAN_FEATURE_11AX := y
+CONFIG_WLAN_FEATURE_DFS_OFFLOAD := y
+CONFIG_DIRECT_BUF_RX_ENABLE := y
+CONFIG_WLAN_CFR_ENABLE := y
+CONFIG_WMI_DBR_SUPPORT := y
+CONFIG_WLAN_ENH_CFR_ENABLE := y
+CONFIG_SCALE_INCLUDES := y
+CONFIG_HASTINGS_BT_WAR := y
+CONFIG_WDI3_IPA_OVER_GSI :=y
+CONFIG_HOST_WAKEUP_OVER_QMI := y
+CONFIG_WLAN_FEATURE_WMI_DIAG_OVER_CE7 := y
+CONFIG_WLAN_FEATURE_LRO_CTX_IN_CB := y
+CONFIG_WLAN_FEATURE_PEER_TXQ_FLUSH_CONF := y
+
+#Enable RHINE based Configs
+CONFIG_FIX_TXDMA_LIMITATION := y
+CONFIG_FEATURE_AST := y
+CONFIG_PEER_PROTECTED_ACCESS := y
+CONFIG_SERIALIZE_QUEUE_SETUP := y
+CONFIG_DP_RX_PKT_NO_PEER_DELIVER := y
+CONFIG_DP_RX_DROP_RAW_FRM := y
+CONFIG_FEATURE_ALIGN_STATS_FROM_DP := y
+CONFIG_DP_RX_SPECIAL_FRAME_NEED := y
+CONFIG_FEATURE_STATS_EXT_V2 := y
+CONFIG_WLAN_FEATURE_DP_RX_THREADS := y
+CONFIG_WLAN_FEATURE_RX_SOFTIRQ_TIME_LIMIT := y
+CONFIG_FEATURE_NO_DBS_INTRABAND_MCC_SUPPORT := y
+CONFIG_HAL_DISABLE_NON_BA_2K_JUMP_ERROR := y
+CONFIG_ENABLE_HAL_SOC_STATS := y
+CONFIG_ENABLE_HAL_REG_WR_HISTORY := y
+CONFIG_MON_ENABLE_DROP_FOR_MAC := y
+CONFIG_PCI_LINK_STATUS_SANITY := y
+CONFIG_DDP_MON_RSSI_IN_DBM := y
+CONFIG_SYSTEM_PM_CHECK := y
+CONFIG_DISABLE_EAPOL_INTRABSS_FWD := y
+CONFIG_FEATURE_RX_LINKSPEED_ROAM_TRIGGER := y
+CONFIG_DP_TRAFFIC_END_INDICATION := y
+
+ifeq ($(CONFIG_ICNSS2), m)
+	CONFIG_ICNSS2_MODULE := y
+endif
+ifeq ($(CONFIG_CNSS_GENL), m)
+	CONFIG_CNSS_GENL_MODULE := y
+endif
+ifeq ($(CONFIG_CNSS_UTILS), m)
+	CONFIG_CNSS_UTILS_MODULE := y
+endif
+ifeq ($(CONFIG_WCNSS_MEM_PRE_ALLOC), m)
+	CONFIG_WCNSS_MEM_PRE_ALLOC_MODULE := y
+endif
+
+CONFIG_ROME_IF = ipci
+CONFIG_PLD_IPCI_ICNSS_FLAG := y
+
+ifdef CONFIG_IPCIE_FW_SIM
+	CONFIG_ROME_IF = ipci
+	CONFIG_PLD_IPCI_ICNSS_FLAG := n
+endif
+
+# Make WLAN as open-source driver by default
+WLAN_OPEN_SOURCE := y
+
+ifneq ($(DEVELOPER_DISABLE_BUILD_TIMESTAMP), y)
+ifneq ($(WLAN_DISABLE_BUILD_TAG), y)
+CONFIG_BUILD_TAG := y
+endif
+endif
+
+CONFIG_WLAN_FEATURE_MBSSID := y
+CONFIG_WLAN_FEATURE_P2P_P2P_STA := y
+
+#Flag to enable Legacy Fast Roaming3(LFR3)
+CONFIG_QCACLD_WLAN_LFR3 := y
+
+#Flag to enable Dynamic MAC address update
+CONFIG_WLAN_FEATURE_DYNAMIC_MAC_ADDR_UPDATE := y
+
+CONFIG_WIFI_MONITOR_SUPPORT := y
+CONFIG_QCA_MONITOR_PKT_SUPPORT := y
+CONFIG_MONITOR_MODULARIZED_ENABLE := n
+
+ifneq ($(CONFIG_MOBILE_ROUTER), y)
+#Flag to enable TDLS feature
+CONFIG_QCOM_TDLS := y
+
+CONFIG_WLAN_SYSFS := y
+
+CONFIG_THERMAL_STATS_SUPPORT := y
+
+#Flag to enable pre cac feature
+CONFIG_FEATURE_WLAN_PRE_CAC := y
+
+ifeq ($(CONFIG_WLAN_SYSFS), y)
+	CONFIG_WLAN_SYSFS_STA_INFO := y
+	CONFIG_WLAN_SYSFS_CHANNEL := y
+	CONFIG_WLAN_SYSFS_FW_MODE_CFG := y
+	CONFIG_WLAN_SYSFS_MEM_STATS := y
+	CONFIG_WLAN_REASSOC := y
+	CONFIG_WLAN_SYSFS_CONNECT_INFO := y
+	CONFIG_WLAN_SCAN_DISABLE := y
+	CONFIG_WLAN_SYSFS_DCM := y
+	CONFIG_WLAN_WOW_ITO := y
+	CONFIG_WLAN_WOWL_ADD_PTRN := y
+	CONFIG_WLAN_WOWL_DEL_PTRN := y
+	CONFIG_WLAN_SYSFS_TX_STBC := y
+	CONFIG_WLAN_SYSFS_WLAN_DBG := y
+	CONFIG_WLAN_TXRX_FW_ST_RST := y
+	CONFIG_WLAN_GTX_BW_MASK := y
+	CONFIG_WLAN_SYSFS_SCAN_CFG := y
+	CONFIG_WLAN_SYSFS_MONITOR_MODE_CHANNEL := y
+	CONFIG_WLAN_SYSFS_RADAR := y
+	CONFIG_WLAN_SYSFS_RTS_CTS := y
+	CONFIG_WLAN_SYSFS_HE_BSS_COLOR := y
+	CONFIG_WLAN_TXRX_FW_STATS := y
+	CONFIG_WLAN_TXRX_STATS := y
+	CONFIG_WLAN_SYSFS_DP_TRACE := y
+	CONFIG_WLAN_SYSFS_STATS := y
+ifeq ($(CONFIG_QCOM_TDLS), y)
+	CONFIG_WLAN_SYSFS_TDLS_PEERS := y
+endif
+	CONFIG_WLAN_SYSFS_TEMPERATURE := y
+	CONFIG_WLAN_THERMAL_CFG := y
+	CONFIG_WLAN_DL_MODES := y
+	CONFIG_WLAN_DUMP_IN_PROGRESS := n
+	CONFIG_WLAN_BMISS := y
+	CONFIG_WLAN_FREQ_LIST := y
+	CONFIG_DP_PKT_ADD_TIMESTAMP := y
+endif
+CONFIG_WLAN_PDEV_VDEV_SEND_MULTI_PARAM := y
+CONFIG_WLAN_POWER_DEBUG := y
+#Enable Beacon Reception Stats
+CONFIG_FEATURE_BECN_STATS := y
+#Flag to enable NAN
+CONFIG_QCACLD_FEATURE_NAN := y
+endif
+
+CONFIG_WLAN_FEATURE_MEDIUM_ASSESS := y
+
+#Disable the Export Symbol config
+ifeq ($(CONFIG_QCACLD_FEATURE_SON), y)
+CONFIG_WLAN_DISABLE_EXPORT_SYMBOL := n
+else
+CONFIG_WLAN_DISABLE_EXPORT_SYMBOL := y
+endif
+
+CONFIG_QCACLD_FEATURE_GREEN_AP := y
+
+#Flag to enable Android Packet Filtering
+CONFIG_QCACLD_FEATURE_APF := y
+
+#Flag to enable SARv1 -> SARv2 conversion
+CONFIG_WLAN_FEATURE_SARV1_TO_SARV2 := y
+
+#Flag to enable get firmware state
+CONFIG_QCACLD_FEATURE_FW_STATE := y
+
+#Flag to enable set coex configuration
+CONFIG_QCACLD_FEATURE_COEX_CONFIG := n
+
+#Flag to enable Fast Transition (11r) feature
+CONFIG_QCOM_VOWIFI_11R := y
+
+#Flag to enable disable ACTION OUI feature
+CONFIG_WLAN_FEATURE_ACTION_OUI := y
+
+#Flag to enable Adaptive 11r feature
+CONFIG_ADAPTIVE_11R := y
+
+#Flag to enable sae single pmk feature
+CONFIG_SAE_SINGLE_PMK := y
+
+#Flag to enable/disable multi client low latency feature support
+CONFIG_MULTI_CLIENT_LL_SUPPORT := y
+
+#Flag to enable/disable vendor handoff feature support
+CONFIG_WLAN_VENDOR_HANDOFF_CONTROL := y
+
+#Flag to enable mscs feature
+CONFIG_FEATURE_MSCS := y
+
+#Flag to enable FILS Feature (11ai)
+CONFIG_WLAN_FEATURE_FILS := y
+ifneq ($(CONFIG_QCA_CLD_WLAN),)
+	ifeq (y,$(findstring y,$(CONFIG_ICNSS2) $(CONFIG_ICNSS2_MODULE)))
+	#Flag to enable Protected Management Frames (11w) feature
+	CONFIG_WLAN_FEATURE_11W := y
+	#Flag to enable LTE CoEx feature
+	CONFIG_QCOM_LTE_COEX := y
+	ifneq ($(CONFIG_MOBILE_ROUTER), y)
+		CONFIG_WLAN_FEATURE_LPSS := y
+	endif
+	endif
+
+endif
+
+CONFIG_FEATURE_EPPING := y
+
+#Flag to enable offload packets feature
+CONFIG_WLAN_OFFLOAD_PACKETS := y
+
+#enable TSF get feature
+CONFIG_WLAN_SYNC_TSF := y
+
+#Flag to enable SAE
+CONFIG_WLAN_FEATURE_SAE := y
+
+#Flag to enable DISA
+CONFIG_WLAN_FEATURE_DISA := y
+
+#Flag to enable FIPS
+CONFIG_WLAN_FEATURE_FIPS := y
+
+#Flag to enable Fast Path feature
+CONFIG_WLAN_FASTPATH := y
+
+# Flag to enable NAPI
+CONFIG_WLAN_NAPI := y
+CONFIG_WLAN_NAPI_DEBUG := n
+
+# Flag to enable FW based TX Flow control
+CONFIG_WLAN_TX_FLOW_CONTROL_V2 := y
+
+CONFIG_POWER_MANAGEMENT_OFFLOAD := y
+
+# Flag to enable LFR Subnet Detection
+CONFIG_LFR_SUBNET_DETECTION := y
+
+# Flag to enable MCC to SCC switch feature
+CONFIG_MCC_TO_SCC_SWITCH := y
+
+ifeq ($(CONFIG_SLUB_DEBUG_ON), y)
+	# Enable Obj Mgr Degug services if slub build
+	CONFIG_WLAN_OBJMGR_DEBUG:= y
+	CONFIG_LOCK_STATS_ON:= y
+	CONFIG_WLAN_OBJMGR_REF_ID_TRACE := y
+endif
+
+ifeq ($(CONFIG_WLAN_SYSFS), y)
+	CONFIG_WLAN_SYSFS_RANGE_EXT := y
+endif
+
+#Whether have QMI support
+CONFIG_QMI_SUPPORT := y
+
+# Enable fw stats version 2
+CONFIG_AR900B := y
+
+# Enable sw_cookie sanity WAR for all Rhine platforms
+CONFIG_DP_WAR_VALIDATE_RX_ERR_MSDU_COOKIE := y
+
+#
+# Enable Shadow V3 for all Beryllium platform
+#
+CONFIG_SHADOW_V3 := y
+
+CONFIG_RX_DEFRAG_DO_NOT_REINJECT := y
+CONFIG_MARK_ICMP_REQ_TO_FW := y
+CONFIG_IPA_SET_RESET_TX_DB_PA := y
+#
+# Enable VERBOSE debug INI mechanism
+#
+CONFIG_VERBOSE_DEBUG := y
+CONFIG_RX_DESC_SANITY_WAR := y
+
+CONFIG_WCN6450_HEADERS_DEF := y
+CONFIG_QCA_WIFI_WCN6450 := y
+CONFIG_IPA_SET_RESET_TX_DB_PA := y
+CONFIG_WIFI_3_0_ADRASTEA := y
+CONFIG_ADRASTEA_RRI_ON_DDR := y
+CONFIG_ADRASTEA_SHADOW_REGISTERS := y
+CONFIG_HIF_HAL_REG_ACCESS_SUPPORT := y
+CONFIG_CE_LEGACY_MSI_SUPPORT := y
+
+CONFIG_BUS_AUTO_SUSPEND := y
+
+CONFIG_QCA_WIFI_QCA8074 := y
+CONFIG_QCA_WIFI_QCA8074_VP := y
+CONFIG_DP_INTR_POLL_BASED := y
+CONFIG_TX_PER_PDEV_DESC_POOL := y
+CONFIG_DP_TRACE := y
+CONFIG_FEATURE_TSO := y
+CONFIG_FEATURE_FORCE_WAKE := y
+CONFIG_DP_LFR := y
+CONFIG_DUP_RX_DESC_WAR := y
+CONFIG_HTT_PADDR64 := y
+CONFIG_RX_OL := y
+CONFIG_TX_TID_OVERRIDE := y
+CONFIG_DP_TXRX_SOC_ATTACH := y
+ifeq ($(CONFIG_WLAN_FEATURE_DP_BUS_BANDWIDTH), y)
+CONFIG_WLAN_CLD_PM_QOS := y
+endif
+CONFIG_WLAN_CLD_DEV_PM_QOS := y
+CONFIG_DISABLE_DP_STATS := n
+CONFIG_MAX_ALLOC_PAGE_SIZE := y
+CONFIG_REO_DESC_DEFER_FREE := y
+CONFIG_RXDMA_ERR_PKT_DROP := y
+CONFIG_DELIVERY_TO_STACK_STATUS_CHECK := y
+CONFIG_WLAN_TRACE_HIDE_MAC_ADDRESS := n
+CONFIG_WLAN_TRACE_HIDE_SSID := n
+CONFIG_DP_MEM_PRE_ALLOC := y
+CONFIG_FEATURE_GPIO_CFG := y
+
+ifeq ($(CONFIG_FEATURE_TSO), y)
+	CONFIG_FEATURE_TSO_STATS := y
+	CONFIG_TSO_DEBUG_LOG_ENABLE := y
+endif
+
+ifeq ($(CONFIG_DISABLE_DP_STATS), y)
+	CONFIG_FEATURE_TSO_STATS := n
+endif
+
+# As per target team, build is done as follows:
+# Defconfig : build with default flags
+# Slub      : defconfig  + CONFIG_SLUB_DEBUG=y +
+#	      CONFIG_SLUB_DEBUG_ON=y + CONFIG_PAGE_POISONING=y
+# Perf      : Using appropriate msmXXXX-perf_defconfig
+#
+# Shipment builds (user variants) should not have any debug feature
+# enabled. This is identified using 'TARGET_BUILD_VARIANT'. Slub builds
+# are identified using the CONFIG_SLUB_DEBUG_ON configuration. Since
+# there is no other way to identify defconfig builds, QCOMs internal
+# representation of perf builds (identified using the string 'perf'),
+# is used to identify if the build is a slub or defconfig one. This
+# way no critical debug feature will be enabled for perf and shipment
+# builds. Other OEMs are also protected using the TARGET_BUILD_VARIANT
+# config.
+ifneq ($(TARGET_BUILD_VARIANT),user)
+	CONFIG_WLAN_DEBUG_CRASH_INJECT := y
+endif
+
+#Disable pktlog feature for Rhine based target
+CONFIG_FEATURE_PKTLOG := n
+
+#Enable WLAN/Power debugfs feature only if debug_fs is enabled
+ifeq ($(CONFIG_DEBUG_FS), y)
+       # Flag to enable debugfs. Depends on CONFIG_DEBUG_FS in kernel
+       # configuration.
+       CONFIG_WLAN_DEBUGFS := y
+
+       # Flag to enable streamfs. Depends on CONFIG_DEBUG_FS and
+       # CONFIG_RELAY in kernel configuration.
+ifeq ($(CONFIG_RELAY), y)
+       CONFIG_WLAN_STREAMFS := y
+endif
+endif
+
+ifeq ($(CONFIG_WLAN_DEBUGFS), y)
+       CONFIG_WLAN_MWS_INFO_DEBUGFS := y
+       CONFIG_WLAN_FEATURE_MIB_STATS := y
+endif
+
+# Feature flags which are not (currently) configurable via Kconfig
+
+#Whether to build debug version
+BUILD_DEBUG_VERSION := y
+
+#Enable this flag to build driver in diag version
+BUILD_DIAG_VERSION := y
+
+ifeq ($(CONFIG_SLUB_DEBUG), y)
+	PANIC_ON_BUG := y
+	WLAN_WARN_ON_ASSERT := y
+else ifeq ($(CONFIG_PERF_DEBUG), y)
+	PANIC_ON_BUG := y
+	WLAN_WARN_ON_ASSERT := y
+else
+	PANIC_ON_BUG := n
+	WLAN_WARN_ON_ASSERT := n
+endif
+
+# Compile all log levels by default
+CONFIG_WLAN_LOG_FATAL := y
+CONFIG_WLAN_LOG_ERROR := y
+CONFIG_WLAN_LOG_WARN := y
+CONFIG_WLAN_LOG_INFO := y
+CONFIG_WLAN_LOG_DEBUG := y
+CONFIG_WLAN_LOG_ENTER := y
+CONFIG_WLAN_LOG_EXIT := y
+
+#Enable OL debug and wmi unified functions
+CONFIG_ATH_PERF_PWR_OFFLOAD := y
+
+#Disable packet log
+CONFIG_REMOVE_PKT_LOG := y
+
+#Enable 11AC TX
+CONFIG_ATH_11AC_TXCOMPACT := y
+
+#Enable PCI specific APIS (dma, etc)
+CONFIG_HIF_IPCI := y
+
+# enable/disable feature flags based upon mobile router profile
+ifeq ($(CONFIG_MOBILE_ROUTER), y)
+CONFIG_FEATURE_WLAN_MCC_TO_SCC_SWITCH := y
+CONFIG_FEATURE_WLAN_AUTO_SHUTDOWN := y
+CONFIG_FEATURE_WLAN_AP_AP_ACS_OPTIMIZE := y
+CONFIG_FEATURE_WLAN_STA_4ADDR_SCHEME := y
+CONFIG_MDM_PLATFORM := y
+CONFIG_FEATURE_HAL_DELAYED_REG_WRITE := n
+CONFIG_FEATURE_WLAN_STA_AP_MODE_DFS_DISABLE := y
+CONFIG_FEATURE_AP_MCC_CH_AVOIDANCE := y
+CONFIG_FEATURE_STA_MODE_VOTE_LINK := y
+else
+CONFIG_QCOM_ESE := y
+CONFIG_WLAN_OPEN_P2P_INTERFACE := y
+CONFIG_WLAN_ENABLE_SOCIAL_CHANNELS_5G_ONLY := y
+endif
+
+#Enable power management suspend/resume functionality to PCI
+CONFIG_ATH_BUS_PM := y
+
+#Enable FLOWMAC module support
+CONFIG_ATH_SUPPORT_FLOWMAC_MODULE := n
+
+#Enable spectral support
+CONFIG_ATH_SUPPORT_SPECTRAL := n
+
+CONFIG_PKTLOG_LEGACY := n
+CONFIG_WLAN_CUSTOM_DSCP_UP_MAP := y
+
+CONFIG_WAPI_BIG_ENDIAN := y
+
+#Enable WDI Event support
+CONFIG_WDI_EVENT_ENABLE := y
+ifeq ($(CONFIG_REMOVE_PKT_LOG), y)
+ifeq ($(CONFIG_WLAN_ENH_CFR_ENABLE), n)
+CONFIG_WDI_EVENT_ENABLE := n
+endif
+endif
+
+#Enable the type_specific_data in the ath_pktlog_arg
+ifeq ($(CONFIG_REMOVE_PKT_LOG), n)
+CONFIG_PKTLOG_HAS_SPECIFIC_DATA := y
+endif
+
+#Endianness selection
+CONFIG_LITTLE_ENDIAN := y
+
+#Enable TX reclaim support
+CONFIG_TX_CREDIT_RECLAIM_SUPPORT := n
+
+#Enable FTM support
+CONFIG_QCA_WIFI_FTM := y
+
+ifeq ($(CONFIG_QCA_WIFI_FTM), y)
+
+ifeq ($(CONFIG_NL80211_TESTMODE), y)
+	QCA_WIFI_FTM_NL80211 :=y
+else
+	QCA_WIFI_FTM_NL80211 :=n
+endif
+	CONFIG_LINUX_QCMBR :=y
+
+else
+	QCA_WIFI_FTM_NL80211 :=n
+	CONFIG_LINUX_QCMBR :=n
+endif
+
+
+#Enable Checksum Offload
+CONFIG_CHECKSUM_OFFLOAD := y
+
+#Enable GTK offload
+CONFIG_GTK_OFFLOAD := y
+
+#Set this to 1 to catch erroneous Target accesses during debug.
+CONFIG_ATH_PCIE_ACCESS_DEBUG := n
+
+#Enable IPA offload for MDM platforms
+ifeq ($(CONFIG_MDM_PLATFORM), y)
+ifeq ($(CONFIG_IPA), y)
+CONFIG_IPA_OFFLOAD := y
+endif
+ifeq ($(CONFIG_IPA3), y)
+CONFIG_IPA_OFFLOAD := y
+endif
+ifeq ($(CONFIG_IPA3), m)
+CONFIG_IPA_OFFLOAD := y
+endif
+else
+CONFIG_IPA_OFFLOAD := n
+endif
+
+#Enable Signed firmware support for split binary format
+CONFIG_QCA_SIGNED_SPLIT_BINARY_SUPPORT := n
+
+#Enable single firmware binary format
+CONFIG_QCA_SINGLE_BINARY_SUPPORT := n
+
+#Enable collecting target RAM dump after kernel panic
+CONFIG_TARGET_RAMDUMP_AFTER_KERNEL_PANIC := y
+
+#Flag to enable/disable secure firmware feature
+CONFIG_FEATURE_SECURE_FIRMWARE := n
+
+#Flag to enable Stats Ext implementation
+CONFIG_FEATURE_STATS_EXT := y
+
+#Flag to allocate memory dynamically for different buffers
+CONFIG_WLAN_LOGGING_BUFFERS_DYNAMICALLY := n
+CONFIG_WLAN_DFS_STATIC_MEM_ALLOC := y
+
+#Flag to enable HTC credit history feature
+CONFIG_FEATURE_HTC_CREDIT_HISTORY := y
+
+#Flag to enable MTRACE feature
+CONFIG_TRACE_RECORD_FEATURE := y
+
+#Flag to enable p2p debug feature
+CONFIG_WLAN_FEATURE_P2P_DEBUG := y
+
+#Flag to enable roam debug log
+CONFIG_FEATURE_ROAM_DEBUG := y
+
+#Flag to enable DFS Master feature
+CONFIG_WLAN_DFS_MASTER_ENABLE := y
+
+#Flag to enable WEXT support for STA/AP/P2P interfaces
+ifeq ($(CONFIG_WIRELESS_EXT), y)
+CONFIG_WLAN_WEXT_SUPPORT_ENABLE := y
+endif
+
+#Flag to enable/disable MTRACE feature
+CONFIG_ENABLE_MTRACE_LOG := y
+
+#Flag to enable nud tracking feature
+CONFIG_WLAN_NUD_TRACKING := y
+
+#Flag to enable/Disable Function call trace
+CONFIG_FUNC_CALL_MAP := n
+
+#Flag to enable wbuff feature
+CONFIG_WLAN_WBUFF := y
+
+#Flag to enable set and get disable channel list feature
+CONFIG_DISABLE_CHANNEL_LIST :=y
+
+#Flag to enable beacon receive feature
+CONFIG_WLAN_BCN_RECV_FEATURE := y
+
+#Flag to enable LTE COEX feature
+CONFIG_LTE_COEX := y
+
+#Flag to enable/disable TARGET 11d scan
+CONFIG_TARGET_11D_SCAN := y
+
+#Flag to enable/disable Avoid acs freq feature
+CONFIG_SAP_AVOID_ACS_FREQ_LIST := y
+
+#Flag to enable HOST OPCLASS feature
+CONFIG_HOST_OPCLASS := y
+
+#Flag to enable Dynamic Voltage WDCVS (Config Voltage Mode)
+CONFIG_WLAN_DYNAMIC_CVM := y
+
+#Flag to enable SAR Safety Feature
+CONFIG_SAR_SAFETY_FEATURE := y
+
+CONFIG_CONNECTION_ROAMING_CFG := n
+
+CONFIG_FEATURE_SET := y
+
+CONFIG_WIFI_POS_CONVERGED := y
+CONFIG_WLAN_TWT_CONVERGED := y
+ifneq ($(CONFIG_WIFI_POS_CONVERGED), y)
+CONFIG_WIFI_POS_LEGACY := y
+endif
+
+CONFIG_CP_STATS := y
+CONFIG_FEATURE_INTEROP_ISSUES_AP := y
+
+CONFIG_FEATURE_WLAN_WAPI := y
+
+CONFIG_AGEIE_ON_SCAN_RESULTS := y
+
+#Flag to enable FW log parsing support feature
+CONFIG_FEATURE_FW_LOG_PARSING := y
+
+CONFIG_PTT_SOCK_SVC_ENABLE := y
+CONFIG_SOFTAP_CHANNEL_RANGE := y
+CONFIG_FEATURE_WLAN_SCAN_PNO := y
+CONFIG_WLAN_FEATURE_PACKET_FILTERING := y
+CONFIG_WLAN_NS_OFFLOAD := y
+CONFIG_FEATURE_WLAN_RA_FILTERING:= y
+CONFIG_FEATURE_WLAN_LPHB := y
+CONFIG_QCA_SUPPORT_TX_THROTTLE := y
+CONFIG_WMI_INTERFACE_EVENT_LOGGING := y
+CONFIG_WLAN_FEATURE_LINK_LAYER_STATS := y
+CONFIG_FEATURE_CLUB_LL_STATS_AND_GET_STATION := y
+CONFIG_FEATURE_WLAN_EXTSCAN := n
+CONFIG_WMI_BCN_OFFLOAD := y
+CONFIG_160MHZ_SUPPORT := y
+CONFIG_REG_CLIENT := y
+CONFIG_WLAN_PMO_ENABLE := y
+CONFIG_CONVERGED_P2P_ENABLE := y
+CONFIG_WLAN_POLICY_MGR_ENABLE := y
+CONFIG_FEATURE_DENYLIST_MGR := y
+CONFIG_FOURTH_CONNECTION := y
+CONFIG_SUPPORT_11AX := y
+CONFIG_HDD_INIT_WITH_RTNL_LOCK := y
+CONFIG_WLAN_CONV_SPECTRAL_ENABLE := y
+CONFIG_WLAN_SPECTRAL_ENABLE := y
+CONFIG_WMI_CMD_STRINGS := y
+
+CONFIG_FEATURE_MONITOR_MODE_SUPPORT := y
+
+CONFIG_WLAN_ALLOCATE_GLOBAL_BUFFERS_DYNAMICALLY := n
+CONFIG_WLAN_FEATURE_TWT := y
+CONFIG_FW_THERMAL_THROTTLE := y
+CONFIG_WLAN_FEATURE_BIG_DATA_STATS := y
+CONFIG_WLAN_FEATURE_IGMP_OFFLOAD := y
+CONFIG_WLAN_FEATURE_GET_USABLE_CHAN_LIST := y
+CONFIG_FEATURE_RADAR_HISTORY := y
+
+CONFIG_WLAN_FEATURE_BMI := n
+
+#Flags to enable/disable vendor commands
+CONFIG_FEATURE_RSSI_MONITOR := y
+CONFIG_FEATURE_BSS_TRANSITION := y
+CONFIG_FEATURE_STATION_INFO := y
+CONFIG_FEATURE_TX_POWER := y
+CONFIG_FEATURE_OTA_TEST := y
+CONFIG_FEATURE_ACTIVE_TOS := y
+CONFIG_FEATURE_SAR_LIMITS := y
+CONFIG_FEATURE_CONCURRENCY_MATRIX := y
+CONFIG_FEATURE_SAP_COND_CHAN_SWITCH := y
+CONFIG_FEATURE_P2P_LISTEN_OFFLOAD := y
+CONFIG_QCACLD_FEATURE_MPTA_HELPER := n
+CONFIG_QCACLD_RX_DESC_MULTI_PAGE_ALLOC := y
+
+#Flags to enable/disable WMI APIs
+CONFIG_WMI_ROAM_SUPPORT := y
+CONFIG_WMI_CONCURRENCY_SUPPORT := y
+CONFIG_WMI_STA_SUPPORT := y
+
+CONFIG_DP_TRACE := y
+
+ifeq ($(CONFIG_CNSS_EMULATION), y)
+#on emulation platform, increase host timeouts by 1000 times
+CONFIG_QDF_TIMER_MULTIPLIER_FRAC := 1000
+endif
+
+ifeq ($(CONFIG_SLUB_DEBUG_ON), y)
+	CONFIG_DSC_DEBUG := y
+	CONFIG_DESC_TIMESTAMP_DEBUG_INFO := y
+	CONFIG_FEATURE_UNIT_TEST_SUSPEND := y
+	CONFIG_LEAK_DETECTION := y
+ifndef CONFIG_MAX_LOGS_PER_SEC
+	CONFIG_MAX_LOGS_PER_SEC := 500
+endif
+	CONFIG_SCHED_HISTORY_SIZE := 256
+	CONFIG_TALLOC_DEBUG := y
+	CONFIG_UNIT_TEST := y
+	CONFIG_REGISTER_OP_DEBUG := y
+	CONFIG_ENABLE_QDF_PTR_HASH_DEBUG := y
+	CONFIG_HAL_DEBUG := y
+	CONFIG_FEATURE_HAL_RECORD_SUSPEND_WRITE := y
+
+	CONFIG_HIF_CE_DEBUG_DATA_BUF := y
+	CONFIG_WLAN_RECORD_RX_PADDR := y
+	CONFIG_HIF_CPU_PERF_AFFINE_MASK := y
+	CONFIG_QDF_NBUF_HISTORY_SIZE := 8192
+	CONFIG_DP_RX_REFILL_CPU_PERF_AFFINE_MASK := y
+	CONFIG_FEATURE_HIF_LATENCY_PROFILE_ENABLE := y
+
+ifneq ($(CONFIG_CNSS_EMULATION), y)
+	CONFIG_HIF_DETECTION_LATENCY_ENABLE := y
+endif
+endif
+
+	CONFIG_HIF_DEBUG := y
+
+ifeq ($(CONFIG_UNIT_TEST), y)
+	CONFIG_DSC_TEST := y
+	CONFIG_QDF_TEST := y
+	CONFIG_FEATURE_WLM_STATS := y
+endif
+
+CONFIG_RX_DESC_DEBUG_CHECK:= y
+CONFIG_ALLOW_PKT_DROPPING := y
+
+CONFIG_DP_HW_TX_DELAY_STATS_ENABLE := y
+CONFIG_WLAN_FEATURE_DP_EVENT_HISTORY := y
+CONFIG_DYNAMIC_RX_AGGREGATION := y
+CONFIG_WLAN_SUPPORT_DATA_STALL := y
+CONFIG_WLAN_DP_PER_RING_TYPE_CONFIG := y
+CONFIG_WLAN_CE_INTERRUPT_THRESHOLD_CONFIG := y
+#Enable WMI TX/RX over QMI
+CONFIG_WMI_SEND_RECV_QMI := y
+CONFIG_WLAN_DP_PENDING_MEM_FLUSH := y
+CONFIG_WLAN_SKIP_BAR_UPDATE := y
+CONFIG_TX_MULTIQ_PER_AC := y
+CONFIG_WLAN_TRACEPOINTS := y
+ENABLE_CE4_COMP_DISABLE_HTT_HTC_MISC_LIST := y
+
+#Flag to enable hdd memory dump feature
+CONFIG_FEATURE_MEMDUMP_ENABLE := y
+
+CONFIG_WLAN_LOGGING_SOCK_SVC := y
+
+CONFIG_CONNECTIVITY_PKTLOG := y
+CONFIG_PKTLOG_HAS_SPECIFIC_DATA := y
+
+ifneq ($(TARGET_BUILD_VARIANT),user)
+CONFIG_DESC_DUP_DETECT_DEBUG := y
+endif
+
+#Enable STATE MACHINE HISTORY
+CONFIG_SM_ENG_HIST := n
+
+#Enable OEM DATA feature
+CONFIG_FEATURE_OEM_DATA := y
+
+#Enable FW Offload
+CONFIG_WLAN_FW_OFFLOAD := y
+
+#Enable eLNA mDNS and ICMP feature
+CONFIG_WLAN_FEATURE_ELNA := y
+CONFIG_WLAN_FEATURE_MDNS_OFFLOAD := y
+CONFIG_WLAN_FEATURE_ICMP_OFFLOAD := y
+
+#Enable 6 GHz Band
+CONFIG_BAND_6GHZ := y
+CONFIG_RX_FISA := y
+CONFIG_MORE_TX_DESC := y
+ifeq ($(CONFIG_SLUB_DEBUG_ON), y)
+	CONFIG_DP_FT_LOCK_HISTORY := y
+endif
+
+CONFIG_HANDLE_BC_EAP_TX_FRM := y
+
+CONFIG_6G_SCAN_CHAN_SORT_ALGO := y
+
+CONFIG_SAP_DHCP_FW_IND := y
+
+#Enable support to get ANI level
+CONFIG_ANI_LEVEL_REQUEST := y
+
+#Enable RX RING buffers debug
+CONFIG_DEBUG_RX_RING_BUFFER := y
+
+#Enable Hash debug
+CONFIG_RX_HASH_DEBUG := y
+
+#Enable VDEV OPS wakelock feature
+CONFIG_FEATURE_VDEV_OPS_WAKELOCK := y
+
+# Enable RX buffer pool support
+CONFIG_WLAN_FEATURE_RX_BUFFER_POOL := y
+CONFIG_DP_RX_BUFFER_POOL_SIZE := 128
+CONFIG_DP_RX_BUFFER_POOL_ALLOC_THRES := 5
+CONFIG_DP_SWLM := y
+
+#Enable Hang Event
+CONFIG_WLAN_HANG_EVENT := y
+
+CONFIG_WLAN_THERMAL_MULTI_CLIENT_SUPPORT := y
+
+CONFIG_DP_LEGACY_MODE_CSM_DEFAULT_DISABLE := 1
+CONFIG_DP_RX_DESC_COOKIE_INVALIDATE := y
+
+CONFIG_WLAN_DEBUG_LINK_VOTE := y
+
+CONFIG_QCACLD_WLAN_CONNECTIVITY_DIAG_EVENT := y
+
+CONFIG_WLAN_FEATURE_CAL_FAILURE_TRIGGER := y
+
+CONFIG_DP_TX_TRACKING := y
+
+ifeq ($(CONFIG_QCACLD_FEATURE_SON), y)
+CONFIG_WDI_EVENT_ENABLE := y
+CONFIG_FEATURE_MONITOR_MODE_SUPPORT := y
+CONFIG_WIFI_MONITOR_SUPPORT := y
+CONFIG_DCS := y
+CONFIG_FEATURE_WDS := y
+endif
+
+ifeq ($(CONFIG_FEATURE_WDS), y)
+CONFIG_FEATURE_MEC := y
+CONFIG_FEATURE_WLAN_STA_4ADDR_SCHEME := y
+CONFIG_FEATURE_MCL_REPEATER := y
+CONFIG_BYPASS_WDS_OL_OPS := y
+CONFIG_WDS_CONV_TARGET_IF_OPS_ENABLE := y
+endif
+
+CONFIG_WLAN_FEATURE_SAP_ACS_OPTIMIZE := y