PCI link info contains maximum link speed and link width
supported by platform. WLAN FW will use supported link
speed to restrict link speed switch upto maximum
supported speed.
Change-Id: Icdf54c8729192faf4966514b57bd826f86652065
CRs-Fixed: 3535790
Add build type string to file name. "qdss_trace_config_debug_v<n>.cfg"
for debug build and "qdss_trace_config_perf_v<n>.cfg" for perf build.
Change-Id: I349a6524c7040d88d69ac329604ade9b9ba07318
CRs-Fixed: 3548322
Provide platform name in host_cap message if
property platform-name-required specified in DTS.
Current platform name is same as device's model name.
Change-id: I8d427602bfc7e6bb5d732fa3e29ff66c965e153b
CRs-Fixed: 3540641
Send QMI message with TME-L patch information to WLAN FW, to
download TME-L patch.
Change-Id: Ieae07c0f761ada45ffcb990b1412654b9c6862b1
CRs-Fixed: 3521187
Add support for AUX UC download functionality if aux support is
indicated by both host and fw.
Change-Id: I3bfbebbb5cdfbbaa350a34378ab2f0809f27affb
CRs-Fixed: 3402104
Add one new device tree config item "qcom,sleep-clk-supported"
to support enable 32k internal sleep clock in case it has no
external 32k clk attached in wlan chipset HW. Like qca6390
on some auto platform, host need explicitly tell firmware
to use internal sleep clock, otherwise it will cause LMAC
ps failure.
Change-Id: I52f5d332a912235596eb127ab8e4660355988038
CRs-Fixed: 3448595
Add change to print file type which is getting
downloaded from cnss2 platform driver to wlan fw.
Change-Id: I737c9c04bc02a3cd320362f230a0862321ec312c
CRs-Fixed: 3401928
Currently, the cnss2 platform driver just can support
one wlan device attached, so do the following changes
to cover dual wlan card attach case. Firstly, delay
the second device go to pcie link suspend and power
off state to make sure it really finished the pcie
enumeration. Then pcie enumeration succeeds with
multi-devices. Secondly, supporting to write the qrtr
node instance id to PCIE register for wlan fw reading,
which can fix qmi message exchange failure if active
two Hastings devices. Thirdly, change the usage of
plat_env to support dual Hastings.
Change-Id: Ica41a23d4e983b91c0ff1b4e76b380803fb877ab
Connection-roaming INI file and its backup files are optional.
So if these files are not present on a device, then do not log error
indicating files are not found.
Change-Id: I1a8fdaf6db75fff0e867c5454d16c40b72d6fbdb
CRs-Fixed: 3389578
Keep PCSS recovery config as persistent during the whole
lifetime of cnss driver, and send it to WLAN firmware
service upon receiving firmware ready event.
Change-Id: Iec6c35c82750df3f8fd43723d102bcabfb539874
CRs-Fixed: 3378798
Icnss and cnss2 driver receives and sends memory size
over qmi to and from wlan fw. This change add maximum
memory size check before sending or receiving fw mem size
over qmi. Also, use QMI_WLFW_MAX_NUM_MEM_SEG_V01 enum as
maximum size limit.
Change-Id: I392bfbbf0359e60bce9e93d909a119e8c72f07d5
CRs-Fixed: 3367408
Add a data length validation check in fw response message in
qdss_data_send_sync().
Change-Id: I197b8d52c06e35f5fcf0f8fee94429fdcf500fcb
CRs-Fixed: 3359589
Add and export API to check whether FW capabilities like
DIRECT_LINK, etc are supported by FW or not.
Update WLAN Firmware Service QMI file as per latest IDL file.
Change-Id: Ic33104ec55e18845b8c33ff611d1ecc15ec5cd77
CRs-Fixed: 3335259
Only when SMMU S1 enabled, CNSS driver will send IOVA range in
HOST_CAP message, and let firmware to configure ATU.
Change-Id: Idd19063da975c0105d91e0e31575d0b0d1edd8e2
CRs-Fixed: 2896035
DMS server runs in Modem. When Modem SSR happens dms_del_server
gets called. Even after DMS service disconnected, qmi_txn_wait is
still waiting. Release DMS QMI handle in dms_del_server to cancel
pending transaction.
Change-Id: I06ccfba34269dc51288300aa5fa0326842a09e32
CRs-Fixed: 3288808
Add code to parse and store hwid bitmap received from Firmware
as part of target cap response QMI message. The bitmap gives
information about the FEM combination in use.
Change-Id: I6c7e9cedfc70df056ed361953b10a65166915087
Signed-off-by: Sandeep Singh <quic_sandsing@quicinc.com>
Add code to fallback to non-contiguous FW mem allocation on
failure to allocate contiguous memory.
Change-Id: Idbc7ff7f9ea4d2157e3b549dde8ee090a0f0b412
CRs-Fixed: 3072737
For kiwi target the current code is using shadow_reg indexes 0,1. Change
the logic to use next two shadow registers of what is used by the host.
Change-Id: Ice95be0f2106078b8f799ca1182d1d8702b564c6
CRs-Fixed: 3218660
Extend current recovery sysfs interface, add pcss recovery support.
Change previous sysfs recovery from bool to bitamp. Bit 0 is used
for original wlan recovery, bit 1 is newly added for pcss recovery.
Once fw is downloaded, host driver can use QMI message to notify
fw enable or disable this feature.
Change-Id: Ifdf49cecc70ab2d554bd267d18ff78d92049f5b8
Open Loop CPR feature is extended to support multiple VRegs. Add IDL
data structures, device tree setup for WLAN device PMU pin to platform
VReg mapping and handling for new OL CPR params from FW.
Change-Id: Ibdcc5b30521c01e12124b32bd6291def98bd9516
Add change to get hang event params over target cap response.
With this change hard-coding of hang data address and offset
is removed if valid hang data params are received over QMI.
Change-Id: Ife163cf66d5880cd9a658a841e5d4a73816fd982
Bring CNSS family drivers from msm-5.10 kernel as of commit
cc3bc4b888af (cnss2: Fix a few switch statement fallthrough
issues) to WLAN platform project. Fix SPDX-License format for
a few files as well.
drivers/net/wireless/cnss* -> .
include/net/cnss* -> inc/
Above shows how directories and header files are relocated.
Change-Id: If8fd40a35c9fdbeb1aa76a8aac5fdb1fc1c7e786
