Enable or Disable PPEDS for specific
WLAN Soc.
usage:
add "ppeds_wifi_soc_cfg=0x02"
in /ini/global_i.ini to enable
PPEDS only for second WLAN SoC.
Change-Id: I65f138cf37298feac70e76b95c22507e58394618
CRs-Fixed: 3408439
Reuse the tx descriptors released in tx completions
without releasing the associated skbs to reduce
the cpu utilization in direct switch mode.
Change-Id: I4ab3ac58977a626344877b8a818a4dbc4864aaf3
CRs-Fixed: 3393968
Change the number of tx descs per soc for direct switch
used for ppe2tcl ring to 2048 from existing 8192 to reduce
buffer usage.
Change-Id: I1e749833002926e9b6b9a84d38651525548dc79c
CRs-Fixed: 3391066
If TX data is TCP ACK, configure TX flow index 3 in
SW2TCL data cmd ring descriptor.
Change-Id: Ibd08b13ba8f0481aa11cd9c3dc54a49cd73674fb
CRs-Fixed: 3368303
Added changes in wifi module to update PPE2TCL & REO2PPE ring
size as 8k to improve the perf for MLO case
Change-Id: I6ca241c21c44b4cda8869e5e2ae9a4a906d98fc8
CRs-Fixed: 3365361
An INI dp_tx_spl_device_limit is defined and can be used to configure the
limit of TX descriptors that can reserved on the SOC to handle
special frames like EAPOL.
CRs-Fixed: 3343207
Change-Id: Ic84a11249880a3541749a72ac6d60df548f2bc5c
An INI dp_tx_spl_desc is defined and can be used to configure the
limit of TX descriptors that can reserved on the pdev to handle
special frames like EAPOL.
CRs-Fixed: 3343209
Change-Id: I6578bddd1f4ea07528c9f66f778b113ec6fb9e61
1. Change the names of parameters and functions related
to direct switch feature from ppe to ppeds
2. Remove the unused ppe_release_ring
Change-Id: I5a95b1273e338f354903af98158578ac65758a8a
CRs-Fixed: 3345097
Enable and register PPE2TCL and REO2PPE ring interrupts
for direct switch
Set interrupt timer threshold for ppe2tcl ring as 30 us.
Change-Id: Ida1ff6c3c2000f16f07960f7eae0d10edc337dc0
CRs-Fixed: 3341790
Change minimum limit of dp_rxdma_buf_ring and
dp_ipa_tx_alt_ring_size value for ini may change little.
Change-Id: Ibbf8843b8f21bbfff1db83a0934f95222930b9ab
CRs-Fixed: 3338076
On low memory targets, even with current min values, OOM is seen
on driver load time. This requires us to further reduce
the min value.
With 11be enabled, current max value may not meet KPI requirements.
Hence align min and max INI values for IPA TX ring and TX completion
ring size with HOST used ones.
Change-Id: Iedf1c2d4be04d798314e9ba61a844038c5696f45
CRs-Fixed: 3338114
Enable ppe direct switch feature by default
through ini, and rename the ppe_enable parameter
to ppe_ds_enable
Change-Id: I574838394ab9edd0445f65f81f05566967208276
CRs-Fixed: 3339167
Add ini configuration to disable invalid decap type handling
during rx mon tlv processing. This is a temporary change for
debugging purpose and will be removed once HW issue is resolved.
Change-Id: I75eb53170833224ddd144baf1b1d8034f988dd3c
CRs-Fixed: 3308998
Add ini param "dp_disable_rx_buf_low_threshold" to disable
low threshold interrupts on regular rx refill ring. Default
it is enabled.
Change-Id: Ie471a4dc6862cbfe8b1eafe7c7d2ce2e0a7fcb7a
CRs-Fixed: 3313885
delete QCA_TEST_MON_PF_TAGS_STATS to enable stats by default
and just use flag to enable debug nbuf_head dump
Change-Id: I0b0bb627f4d597d28181a11c38fa18b191210da4
CRs-Fixed: 3278411
1. Add stats to indicate REO ring size and Rx desc pool size
2. Add low threshold interrupt stats
3. Update SW2RxDMA ring size max to 16K
Change-Id: If84b88bc08e447774ab445df36b9f2f2219356b8
CRs-Fixed: 3286940
add debug prints and a custom timer for how long to wait to receive next
bk pressure event message.
Change-Id: I5a736b0f134cd179990de536da02967db3e39774
CRs-Fixed: 3273427
Add framework to use different RX hash values and ring masks
for ML and non-ML peers
Change-Id: I098cb50b8873eb137ce096011d01a5c21aaf854f
CRs-Fixed: 3269916
Currently the max number of rx descriptors, via INI,
is 4096, which is not sufficient if the number of
entries in rx buffer refill ring is increased.
Hence the set the max allowed number of rx descriptors
to 16K, which is also the max allowed entries in the
rx buffers refill ring.
Change-Id: I287a3f47525179ebf8de65e2f8310a961881916b
CRs-Fixed: 3224590
Enable bits in WMI_INIT command to let the FW know about host's
capability to support notify frame feature. If the feature is enabled,
host can mark certain TX frames as "notify frames" for hardware and they
need not be sent to FW. FW depends on this capability exchange to decide
whether to install HW rules for frames to be sent to HW.
Change-Id: I7158e79ae0fbdc73a2f4096ae1577337e8291246
CRs-Fixed: 3209399
NAPI scale factor should be configured based on the board
type. for example Hawkeye could have a different scale factor
compared to Alder.
CRs-Fixed: 3212330
Change-Id: Ie0bad6aade9ca9379997aa974154f9fb903ab93e
Add ini support to configure TC ingress filter priority
value which would be used for TC based dynamic GRO.
Change-Id: I1742f4539353939e3a40ff4096b3f833f2029b12
CRs-Fixed: 3206817
Change tx monitor ring sizes and make minor fix when getting the
number of entries.
Change-Id: Iec458d88948556f7007d4fa33bf082c8ee089064
CRs-Fixed: 3206170
Increase max value of Rx refill ring size that
can be configured via ini to 8192
Change-Id: I5180996181e43d26221e0106488eda86cf711e1c
CRs-Fixed: 3198408
Currently, data stall detection is without control over
individual data stall events.
INI variable, gEnableDataStallDetection is converted from
boolean to unsigned int which provides control over events
across FW and host with each bit corresponding to different
data stall events.
Bit 0: Enable all data stall events if set.
Bit 1-30: mapped to data stall events. Used when Bit 0 is 0
Bit 31: Enable aggressive timeout for WLM Mode.
Change-Id: I4656520accd1589e77d5054eaa0a3cb8e63b14b2
CRs-Fixed: 3174906
Add support to change the tx_desc value to 65536. Some changes
to make the function argument as u32 type us made
Change-Id: I7cbde1b7ed4ab4e278c25c1ecfa94b7f673197f2
CRs-Fixed: 3130833
Make 1:1 dependency on num REOs and rx_thread. Keep num rx_thread
dependent on rx REO rings, 1 rx_thread for each rx REO ring.
Controlled via INI dp_reo_rings_map.
Change-Id: I7c199226cfa3f173ea328d71075816b8eb9ba91f
CRs-Fixed: 3048260
Enable the 4th Tx. completion ring to save CPU load
Initialization and interrupt handling for 4th completion ring
is done here.
Change-Id: I2db27218a3c3e14d719d012f03454a6a7aa647fe
User can specify a limit and frames are dropped when the memory
used by packets in the queues goes beyond the limit. This is a
SoC level param.
Change-Id: Id2bd9caaa11d9ea9f9e04c635ff629190bb62916
- Fixes for compilation issues after enabling
monitor 2.0 support.
- change copyright year for all files in the chain.
Change-Id: I885e257bd8ca83850656d8a1f408c1bc34920d7a
CRs-Fixed: 3086483
