Add support for QCA_NL80211_VENDOR_SUBCMD_GET_RADAR_HISTORY vendor
command. This command will return the current NOL list in driver
and the last Radar detection result in previous SAP active state
(includes CAC state).
Change-Id: I719630c39b89c1813ca05c4356dce627d72d82e2
CRs-Fixed: 2966501
Enable CONFIG_FEATURE_GPIO_CFG by default, which is exposing vendor
cmd interface for GPIO configuration.
Change-Id: Ib05025b26c03573920d5241150fab925beed425e
CRs-Fixed: 2953325
Added flag for HTT HTC tx based completion. currently
packet are freed using htt htc misc list.
Change-Id: I2e7e4d59cadf30f4bb14eaefc045240d1ebc1aaa
CRs-Fixed: 2922547
For some of the stability issues triggered by H.W,
by the time host detects it most of the QDF history
is getting overwritten to avoid this increasing QDF
nbuf history. So that there will be less chance of
events getting overwritten.
Change-Id: Ia4bad1a175976af2e56126b56ae8c92a988e4289
CRs-Fixed: 2942868
Enable the history support to log Tx descriptors programmed
in Tx and completion HW rings.
Change-Id: I5ce308354714da78baa05500bc73e1a9ec91b958
CRs-Fixed: 2935363
Currently, module 'm' is converted to 'y' in QGKI when
compiling. In Waipio, GKI2 is present in which 'm'
is not being converted and hence IPA_OFFLOAD is not enabled.
To fix this, checking if CONFIG_IPA3 is either set to y or m
and then enabling CONFIG_IPA_OFFLOAD.
From Kernel 5.10, few IPA functions are depreciated for which
putting the depreciated functions under kernel check condition.
Change-Id: Iba3735692267130b76a8eaaaeeb53c263f8f0ddf
CRs-Fixed: 2921600
IPA_WDI3_TX_TWO_PIPES is added to enable two TX pipes
configuration for IPA WDI 3.0 interfaces.
Enable IPA_WDI3_TX_TWO_PIPES on sdxprairie platform.
Change-Id: I34fe0af56b169ebad9d7bb29b38838dd44503736
CRs-Fixed: 2750082
It enabled two pipes for IPA DBS case on SDX65, and froce wake
doesn't support this case. So disable it on this platform.
Change-Id: Ie8a23f11a5cd089b205c5b6ec27c39a9da9ddad9
CRs-Fixed: 2901043
HSP doesn't support TX_AGGREGATION_SIZE ini, need disable it to avoid
confusing.
Change-Id: I9e49ad5218f913f116cf4472f768f572740f14df
CRs-Fixed: 2918796
The feature HIF_DETECTION_LATENCY_ENABLE is not applicable for all targets.
To avoid issues, enable this feature based on target.
Change-Id: Ia7bab02710ee2bbb9f487571ec98992ac338961f
CRs-Fixed: 2915968
Enable DUMP_REO_QUEUE_INFO_IN_DDR to send cache flush cmd
to REO using cmd: iwpriv wlan0 txrx_stats 34 0
Cache flush cmd will invalidate the h/w cache and ensure
that h/w writes to DDR.
In the cmd callback, the reo status tlvs are processed
and the vaddr of the reo queue desc is used to read the
queue information from DDR and dump it in the host driver logs.
Change-Id: I4521b777d13c490ac687f9ff673182262bc52f62
CRs-Fixed: 2899824
Enable LPSS flag on SDX65 platform to make suspend/resume possible to
work in some special scenario like STA/SAP interface idle exist.
Change-Id: I703401d27d3437d0006ad560c00154b0dc589091
CRs-Fixed: 2873228
Although sdxlemur attach HSP, but LFR3.0 is disabled and LFR2.0 enabled
in target, so add exception in default configure file.
Change-Id: Idabbe317fc0fcc194138beb7444d812cd60455a8
CRs-Fixed: 2854249
Add conditional statements to enable/disalbe FISA compilation
for certain builds.
Change-Id: I76fbe3336b9ad45dc0a4db585fd012778ba792aa
CRs-Fixed: 2901065
Remove all of the conditional compilation for pmf since this
feature is mandatory for future scope from protocol point
of view.
Change-Id: Id3a2127e9ecb343ad2a0354dcbc331c22167d7fb
CRs-Fixed: 2852630
This is to enable feature for detection CE tasklet
scheduling delay and credit response delay issue.
Change-Id: I659aa23eabaa28bfb11051bf15e0343c94061b86
CRs-Fixed: 2874867
Update default values of INI items to most commonly used values
in WCNSS_qcom_cfg.ini file on commercial devices.
Change-Id: Ibf1e22406951855a4e726fb8105913a53d3c33ee
CRs-Fixed: 2874758
Don't set CONFIG_FEATURE_WLAN_STA_AP_MODE_DFS_DISABLE for SDX65 to
support AP+AP both with ACS DFS channel list.
Change-Id: Id3d9fc6ef2d8b285e89c3c4e0f34badd2c63da5f
CRs-Fixed: 2857810
Enable force wake recipe feature DEVICE_FORCE_WAKE_ENABLE
and disable the generic shadow register write feature
GENERIC_SHADOW_REGISTER_ACCESS_ENABLE.
Enable feature HIF_REG_WINDOW_SUPPORT to enable the
windowed register read/write from HIF layer.
Change-Id: Ic19d80b686639eb12a2e0a7c0ebf991740a576e7
CRs-Fixed: 2850592
Enable FEATURE_HAL_DELAYED_REG_WRITE_V2 support for Tx rings
register writes and QCA_OL_DP_SRNG_LOCK_LESS_ACCESS support
for Rx rings register writes, for moselle platforms.
Change-Id: I6b2469d22a37a097fa721269d311c0076c3b89a0
CRs-Fixed: 2873528
To make it generic, rename the flag QCA_WIFI_NAPIER_EMULATION
as QCA_WIFI_EMULATION.
Change-Id: I8e654262a38a7a701a5a34e2bbd5394c8985c65a
CRs-Fixed: 2871313
Decouple BW monitor from WDI3_STATS_UPDATE and add as a
separate feature flag WDI3_STATS_BW_MONITOR.
Change-Id: I77fb5658d995daceaada6a7d64f669da706ead9c
CRs-Fixed: 2868582
Adding history to track the FST lock/unlock events; this
would come in handy in debugging deadlock issues.
Change-Id: I40f783e72e516330fdf71ac91553bc7c4338b82a
CRs-Fixed: 2854397
Make CONFIG_MAX_LOGS_PER_SEC configurable because some platforms would
like to print more information in dmesg in some situations, like FW is
crashed in some CE projects.
Change-Id: Ib12854a7254afe5ace07c616a21400e446a80d4d
CRs-Fixed: 2838214
Configure TWT SAP PDEV count using CONFIG_WLAN_TWT_SAP_PDEV_COUNT
and SAP STA count CONFIG_WLAN_TWT_SAP_STA_COUNT for QCA6490
Change-Id: I74ef054d9cb64ccf66d7e1e788a8cc75aec70cb9
CRs-Fixed: 2843660
