ppe2tcl and Umac reset interrupts need dedicated irq lines.
Hence, group some of the existing dp groups togeather
to share MSI lines to make space for ppe2tcl and Umac reset
dedicated irqs.
Change-Id: I5181caeaeb4d0107b62e7ac812c2f829fd8215a2
CRs-Fixed: 3423553
This code helps to initialize and deinitialize new SOFTUMAC
based Rhine architecture.
Change-Id: I374140ccb3b31e9351c6e683c77d81a5a876472a
CRs-Fixed: 3382913
Support REO2SW ring pointer update threshold configuration,
it is helpful for PCIe utilization improvement.
timer based threshold - M: issue pointer updates when M micro
seconds has elapsed.
number based threshold - N: issue pointer updates when N entries
updates occur.
Change-Id: I49ed388520fd52e97e303d6ea9c04ced6cb5cf5f
CRs-Fixed: 3420101
Add support to enable/disable MLO Link Peer stats through
ini and cfg80211tool enable_ol stats command
Change-Id: Id1229a149befa416d060e1b07eee150e6b295abf
CRs-Fixed: 3397721
Enable or Disable PPEDS for specific
WLAN Soc.
usage:
add "ppeds_wifi_soc_cfg=0x02"
in /ini/global_i.ini to enable
PPEDS only for second WLAN SoC.
Change-Id: I65f138cf37298feac70e76b95c22507e58394618
CRs-Fixed: 3408439
Reuse the tx descriptors released in tx completions
without releasing the associated skbs to reduce
the cpu utilization in direct switch mode.
Change-Id: I4ab3ac58977a626344877b8a818a4dbc4864aaf3
CRs-Fixed: 3393968
Make DP changes for handling umac reset in QCA5332.
Changes are done to program msi_data value of the IPC interrupt to FW.
Change-Id: Ib6453755e191da655b87b528a7cef38a464f316b
CRs-Fixed: 3401146
If TX data is TCP ACK, configure TX flow index 3 in
SW2TCL data cmd ring descriptor.
Change-Id: Ibd08b13ba8f0481aa11cd9c3dc54a49cd73674fb
CRs-Fixed: 3368303
An INI dp_tx_spl_device_limit is defined and can be used to configure the
limit of TX descriptors that can reserved on the SOC to handle
special frames like EAPOL.
CRs-Fixed: 3343207
Change-Id: Ic84a11249880a3541749a72ac6d60df548f2bc5c
An INI dp_tx_spl_desc is defined and can be used to configure the
limit of TX descriptors that can reserved on the pdev to handle
special frames like EAPOL.
CRs-Fixed: 3343209
Change-Id: I6578bddd1f4ea07528c9f66f778b113ec6fb9e61
1. Change the names of parameters and functions related
to direct switch feature from ppe to ppeds
2. Remove the unused ppe_release_ring
Change-Id: I5a95b1273e338f354903af98158578ac65758a8a
CRs-Fixed: 3345097
The kernel-doc script identified a multitude of documentation issues
in the wlan_cfg folder, so fix them.
Change-Id: Id6bfb397608de6b858e448a867a3c21dffc9a178
CRs-Fixed: 3352408
Enable and register PPE2TCL and REO2PPE ring interrupts
for direct switch
Set interrupt timer threshold for ppe2tcl ring as 30 us.
Change-Id: Ida1ff6c3c2000f16f07960f7eae0d10edc337dc0
CRs-Fixed: 3341790
Add ini configuration to disable invalid decap type handling
during rx mon tlv processing. This is a temporary change for
debugging purpose and will be removed once HW issue is resolved.
Change-Id: I75eb53170833224ddd144baf1b1d8034f988dd3c
CRs-Fixed: 3308998
Add ini param "dp_disable_rx_buf_low_threshold" to disable
low threshold interrupts on regular rx refill ring. Default
it is enabled.
Change-Id: Ie471a4dc6862cbfe8b1eafe7c7d2ce2e0a7fcb7a
CRs-Fixed: 3313885
Update the prealloc size for RXDMA_BUF and REO_DST
rings using the ini values which have been configured.
Change-Id: Id47fbca3a79b37bba902d1b5bd0bf8c6073648cc
CRs-Fixed: 3283986
add debug prints and a custom timer for how long to wait to receive next
bk pressure event message.
Change-Id: I5a736b0f134cd179990de536da02967db3e39774
CRs-Fixed: 3273427
Add framework to use different RX hash values and ring masks
for ML and non-ML peers
Change-Id: I098cb50b8873eb137ce096011d01a5c21aaf854f
CRs-Fixed: 3269916
Currently in monitor mode for KIWI, interrupt for RXDMA2HOST is
enabled to process both monitor status srng and montior destination
srng, but low threshold interrupt for monitor status srng is also
enabled. so when available RX buffer in monitor status srng is less
then low threshold, it is possible that two kind of interrupt from
RXDMA2HOST ring and monitor status ring will call
dp_rx_mon_status_process_tlv() in different context and access to
mon_pdev->rx_status_q at the same time, this will lead to skb
double free issue.
solution:
(1) disable RXDMA2HOST srng interrupt in monitor mode.
(2) enable monitor status srng batch count interrupt for monitor
processing.
Change-Id: I1df8830cb7cc55468e5df5e49045c3d96f7c29a8
CRs-Fixed: 3245393
With KIWI_V2, wbm_ring_num for WBM2SW5 and WBM2SW6 have been changed
to 5 and 6. Hence properly update them in g_tcl_wbm_map_array. At the
same time, tx_ring_mask_msi and tx_ring_near_full_irq_mask are also
updated.
With IPA_OFFLOAD enabled soc->tcl_data_ring[0|1|2] is used by HOST
and the other two rings are allocated to IPA usage.
Change-Id: I4c13d0787e46be667c3a5a0ae624df8c2b2b354e
CRs-Fixed: 3229375
UMAC HW reset feature will be using the last interrupt context in each
DP interrupt combination i.e., on a system with more than 8 MSIs for DP,
UMAC HW reset will be assigned a dedicated interrupt context.
Add the necessary support for the same.
CRs-Fixed: 3163900
Change-Id: I26abd01e4261661ed95e1aa3cb2a774e78b50d9f
Increase the number of DP interrupts to 16. The interrupt assignment
table is updated to add new values for different MSI interrupts
available. 9, 10 and 11 MSIs configuration will take the same
configuration as that of 8 MSI. 13, 14 and 15 MSIs configuration
will take the same configuration as that of 12 MSI. New MSI assignment
configuration is introduced for 12 and 16 MSIs.
Change-Id: I82af75b21c793a62fc8f0bd5515e1160b601c0c2
CRs-Fixed: 3209397
Enable bits in WMI_INIT command to let the FW know about host's
capability to support notify frame feature. If the feature is enabled,
host can mark certain TX frames as "notify frames" for hardware and they
need not be sent to FW. FW depends on this capability exchange to decide
whether to install HW rules for frames to be sent to HW.
Change-Id: I7158e79ae0fbdc73a2f4096ae1577337e8291246
CRs-Fixed: 3209399
NAPI scale factor should be configured based on the board
type. for example Hawkeye could have a different scale factor
compared to Alder.
CRs-Fixed: 3212330
Change-Id: Ie0bad6aade9ca9379997aa974154f9fb903ab93e
Add ini support to configure TC ingress filter priority
value which would be used for TC based dynamic GRO.
Change-Id: I1742f4539353939e3a40ff4096b3f833f2029b12
CRs-Fixed: 3206817
For SW2HW ring, if time threshold is non-zero and low threshold
is 0, then if ring is empty, HW will keep generating low threshold
interrupt always which then LPL failed.
Configure SW2HW ring timer threshold 0 to disable low threshold
interrupt, also set batch_count threshold 0 as host not need the
interrupt if HW consumed entries.
Change-Id: I6c8ea516e66abd706fecd97649f3a19702453b85
CRs-Fixed: 3149341
Ageout flush does not happen for WBM2SW4 if there
is only one TX completion pending in FIFO and all the
other WBM release rings are not active. This is due to
an issue in HW and this prevents suspend to happen due
to pending tx completions.
Fix is to avoid using WBM2SW4 release ring and instead
reuse WBM2SW0.
Change-Id: I250d8c9d460895449939212ebdb7abd62edb0234
CRs-Fixed: 3124733
Enable the 4th Tx. completion ring to save CPU load
Initialization and interrupt handling for 4th completion ring
is done here.
Change-Id: I2db27218a3c3e14d719d012f03454a6a7aa647fe
