asoc: codecs: bolero: add delay after toggling hpf gate

Add delay after toggling hpf gate to reduce noise
levels while starting recording use case.

Change-Id: I1a7b1b0a339abb3642ca8420753e9d07023acf89
Signed-off-by: Karthikeyan Mani <[email protected]>

asoc/codecs/bolero/tx-macro.c

@@ -911,6 +911,12 @@ static int tx_macro_enable_dec(struct snd_soc_dapm_widget *w,
 			usleep_range(1000, 1010);
 			snd_soc_component_update_bits(component,
 					hpf_gate_reg, 0x02, 0x00);
+			snd_soc_component_update_bits(component,
+					hpf_gate_reg, 0x01, 0x01);
+			/*
+			 * 6ms delay is required as per HW spec
+			 */
+			usleep_range(6000, 6010);
 		}
 		/* apply gain after decimator is enabled */
 		snd_soc_component_write(component, tx_gain_ctl_reg,

asoc/codecs/bolero/va-macro.c

@@ -1037,6 +1037,12 @@ static int va_macro_enable_dec(struct snd_soc_dapm_widget *w,
 			usleep_range(1000, 1010);
 			snd_soc_component_update_bits(component,
 				hpf_gate_reg, 0x02, 0x00);
+			snd_soc_component_update_bits(component,
+				hpf_gate_reg, 0x01, 0x01);
+			/*
+			 * 6ms delay is required as per HW spec
+			 */
+			usleep_range(6000, 6010);
 		}
 		/* schedule work queue to Remove Mute */
 		schedule_delayed_work(&va_priv->va_mute_dwork[decimator].dwork,