qcacld-3.0: update FW common interface files
FW common files needs to be in sync with host and fw. Update host fw common interface files with latest version of FW interface files. Change-Id: Id4585fbbfaeba186075ecc54b35024315d6e0b68 CRs-Fixed: 1012542
This commit is contained in:
Govind Singh
committed by
Nandini Suresh
Nandini Suresh
parent
f82ed071d0
commit
55b8dafb91
@@ -70,7 +70,7 @@
|
||||
#define AR9888_HOST_INTEREST_ADDRESS 0x00400800
|
||||
#define AR900B_HOST_INTEREST_ADDRESS 0x00400800
|
||||
#define AR6320_HOST_INTEREST_ADDRESS 0x00400800
|
||||
#define QCA6180_HOST_INTEREST_ADDRESS 0x005d96a0
|
||||
#define QCA9377_HOST_INTEREST_ADDRESS 0x00400800
|
||||
#define AR6004_SOC_RESET_ADDRESS 0X00004000
|
||||
#define AR6004_SOC_RESET_CPU_INIT_RESET_MASK 0X00000800
|
||||
#if defined(AR6006_MEMORY_NEW_ARCH)
|
||||
@@ -114,11 +114,11 @@ PREPACK64 struct host_interest_s {
|
||||
/* Save SW ROM version */
|
||||
A_UINT32 hi_sw_rom_version; /* 0x0c */
|
||||
|
||||
/*
|
||||
* General-purpose flag bits, similar to SOC_OPTION_* flags.
|
||||
* Can be used by application rather than by OS.
|
||||
*/
|
||||
A_UINT32 hi_option_flag; /* 0x10 */
|
||||
/*
|
||||
* General-purpose flag bits, similar to SOC_OPTION_* flags.
|
||||
* Can be used by application rather than by OS.
|
||||
*/
|
||||
volatile A_UINT32 hi_option_flag; /* 0x10 */
|
||||
|
||||
/*
|
||||
* Boolean that determines whether or not to
|
||||
@@ -212,7 +212,7 @@ PREPACK64 struct host_interest_s {
|
||||
A_UINT32 hi_acs_flags; /* 0xc0 */
|
||||
A_UINT32 hi_console_flags; /* 0xc4 */
|
||||
A_UINT32 hi_nvram_state; /* 0xc8 */
|
||||
A_UINT32 hi_option_flag2; /* 0xcc */
|
||||
volatile A_UINT32 hi_option_flag2; /* 0xcc */
|
||||
|
||||
/* If non-zero, override values sent to Host in WMI_READY event. */
|
||||
A_UINT32 hi_sw_version_override; /* 0xd0 */
|
||||
@@ -229,8 +229,8 @@ PREPACK64 struct host_interest_s {
|
||||
/* location of CAL data */
|
||||
A_UINT32 hi_cal_data; /* 0xe4 */
|
||||
|
||||
/* Number of packet log buffers */
|
||||
A_UINT32 hi_pktlog_num_buffers; /* 0xe8 */
|
||||
/* Number of packet log buffers */
|
||||
volatile A_UINT32 hi_pktlog_num_buffers; /* 0xe8 */
|
||||
|
||||
/* wow extension configuration */
|
||||
A_UINT32 hi_wow_ext_config; /* 0xec */
|
||||
@@ -351,13 +351,21 @@ PREPACK64 struct host_interest_s {
|
||||
#define HI_OPTION_RF_KILL_SHIFT 0x2
|
||||
#define HI_OPTION_RF_KILL_MASK 0x1
|
||||
|
||||
#define HI_OPTION_HTT_TGT_DEBUG_TX_COMPL_IDX 0x20
|
||||
|
||||
#define HTT_TGT_DEBUG_TX_COMPL_IDX_VALUE() \
|
||||
((HOST_INTEREST->hi_option_flag2 & HI_OPTION_HTT_TGT_DEBUG_TX_COMPL_IDX))
|
||||
|
||||
/* AR9888 1.0 only. Enable/disable CDC max perf support from host */
|
||||
#define HI_OPTION_DISABLE_CDC_MAX_PERF_WAR 0x20
|
||||
#define CDC_MAX_PERF_WAR_ENABLED() \
|
||||
(!(HOST_INTEREST->hi_option_flag2 & HI_OPTION_DISABLE_CDC_MAX_PERF_WAR))
|
||||
|
||||
#define HI_OPTION_USE_EXT_LDO 0x40 /* use LDO27 for 1.1V instead of PMU */
|
||||
#define HI_OPTION_DBUART_SUPPORT 0x80 /* Enable uart debug support */
|
||||
#define HI_OPTION_USE_EXT_LDO 0x40 /* use LDO27 for 1.1V instead of PMU. */
|
||||
#define HI_OPTION_DBUART_SUPPORT 0x80 /* Enable uart debug support */
|
||||
/* This bit is to enable BE low latency for some customers.
|
||||
* The side effect is TCP DL will be 8Mbps decreased (673Mbps -> 665Mbps).
|
||||
*/
|
||||
#define HI_OPTION_BE_LATENCY_OPTIMIZE 0x100
|
||||
#define HT_OPTION_GPIO_WAKEUP_SUPPORT 0x200 /* GPIO wake up support */
|
||||
#define GPIO_WAKEUP_ENABLED() \
|
||||
(HOST_INTEREST->hi_option_flag2 & HT_OPTION_GPIO_WAKEUP_SUPPORT)
|
||||
@@ -406,20 +414,38 @@ PREPACK64 struct host_interest_s {
|
||||
#define HOST_ON_BE_CPU() \
|
||||
(HOST_INTEREST->hi_be)
|
||||
|
||||
/* AP nart no swap descriptor flag. Decsriptors are created on the target processor. */
|
||||
/* AP nart no swap descriptor flag. Decsriptors are created
|
||||
* on the target processor.
|
||||
*/
|
||||
#define DESC_IN_FW() \
|
||||
(HOST_INTEREST->hi_fw_swap & HI_DESC_IN_FW_BIT)
|
||||
|
||||
#define HI_ACS_FLAGS_ENABLED (1 << 0) /* ACS is enabled */
|
||||
#define HI_ACS_FLAGS_USE_WWAN (1 << 1) /* Use physical WWAN device */
|
||||
#define HI_ACS_FLAGS_TEST_VAP (1 << 2) /* Use test VAP */
|
||||
|
||||
#define HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET (1 << 0)
|
||||
#define HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET (1 << 1)
|
||||
#define HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE (1 << 2)
|
||||
|
||||
#define HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_FW_ACK (1 << 16)
|
||||
#define HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_FW_ACK (1 << 17)
|
||||
/* redefine for hi_acs_flags since no product ever use it
|
||||
* NOTE:
|
||||
* This flag was only used in AR6004 for a customer project that has
|
||||
* been canceled, we are reusing it to avoid extending the Host interest
|
||||
* area.
|
||||
* BIT Range Meaning
|
||||
* --------- ----------------------------------
|
||||
* 0 HOST wants to swap MBOX usage
|
||||
* 1 HOST supports HTT reduced tx completion
|
||||
* 2 HOST supports HTT alternate credit size for data frames
|
||||
* 15..3 reserved for HOST
|
||||
* 16 FW set it before sending HTC_Ready to indicate MBOX swap is done
|
||||
* 17 same as above but to indicate HTT reduced tx completion capability
|
||||
* 31..18 reserved for FW
|
||||
*/
|
||||
/* HOST require to swap MBOX */
|
||||
#define HI_ACS_FLAGS_HOST_SWAP_MBOX (1 << 0)
|
||||
/* HOST supports HTT reduced tx completion */
|
||||
#define HI_ACS_FLAGS_HOST_REDUCE_TX_COMPL (1 << 1)
|
||||
/* HOST supports alternate credit size for data frames */
|
||||
#define HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE (1 << 2)
|
||||
/* FW swapped MBOX */
|
||||
#define HI_ACS_FLAGS_FW_SWAPPED_MBOX (1 << 16)
|
||||
/* FW support HTT reduced tx completion */
|
||||
#define HI_ACS_FLAGS_FW_REDUCE_TX_COMPL (1 << 17)
|
||||
|
||||
/* CONSOLE FLAGS
|
||||
*
|
||||
@@ -554,25 +580,25 @@ PREPACK64 struct host_interest_s {
|
||||
(A_UINT32)((size_t)&((((struct host_interest_s *)(AR900B_HOST_INTEREST_ADDRESS))->item)))
|
||||
|
||||
#define HOST_INTEREST_DBGLOG_IS_ENABLED() \
|
||||
(!((volatile A_UINT32)HOST_INTEREST->hi_option_flag & HI_OPTION_DISABLE_DBGLOG))
|
||||
(!(HOST_INTEREST->hi_option_flag & HI_OPTION_DISABLE_DBGLOG))
|
||||
|
||||
#define HOST_INTEREST_PKTLOG_IS_ENABLED() \
|
||||
(((volatile A_UINT32)HOST_INTEREST->hi_pktlog_num_buffers))
|
||||
((HOST_INTEREST->hi_pktlog_num_buffers))
|
||||
|
||||
#define HOST_INTEREST_PROFILE_IS_ENABLED() \
|
||||
((volatile A_UINT32)HOST_INTEREST->hi_option_flag & HI_OPTION_ENABLE_PROFILE)
|
||||
(HOST_INTEREST->hi_option_flag & HI_OPTION_ENABLE_PROFILE)
|
||||
|
||||
#define LF_TIMER_STABILIZATION_IS_ENABLED() \
|
||||
(!((volatile A_UINT32)HOST_INTEREST->hi_option_flag & HI_OPTION_NO_LFT_STBL))
|
||||
(!(HOST_INTEREST->hi_option_flag & HI_OPTION_NO_LFT_STBL))
|
||||
|
||||
#define IS_AMSDU_OFFLAOD_ENABLED() \
|
||||
(((volatile A_UINT32)HOST_INTEREST->hi_option_flag2 & HI_OPTION_OFFLOAD_AMSDU))
|
||||
((HOST_INTEREST->hi_option_flag2 & HI_OPTION_OFFLOAD_AMSDU))
|
||||
|
||||
#define HOST_INTEREST_DFS_IS_ENABLED() \
|
||||
(((volatile A_UINT32)HOST_INTEREST->hi_option_flag2 & HI_OPTION_DFS_SUPPORT))
|
||||
((HOST_INTEREST->hi_option_flag2 & HI_OPTION_DFS_SUPPORT))
|
||||
|
||||
#define HOST_INTEREST_EARLY_CFG_DONE() \
|
||||
(((volatile A_UINT32)HOST_INTEREST->hi_option_flag2 & HI_OPTION_EARLY_CFG_DONE))
|
||||
((HOST_INTEREST->hi_option_flag2 & HI_OPTION_EARLY_CFG_DONE))
|
||||
|
||||
/*power save flag bit definitions*/
|
||||
#define HI_PWR_SAVE_LPL_ENABLED 0x1
|
||||
@@ -615,14 +641,13 @@ PREPACK64 struct host_interest_s {
|
||||
|
||||
#define HOST_INTEREST_ITEM_ADDRESS(TargetType, item) \
|
||||
(((TargetType) == TARGET_TYPE_AR6002) ? AR6002_HOST_INTEREST_ITEM_ADDRESS(item) : \
|
||||
(((TargetType) == TARGET_TYPE_AR6003) ? AR6003_HOST_INTEREST_ITEM_ADDRESS(item) : \
|
||||
(((TargetType) == TARGET_TYPE_AR6004) ? AR6004_HOST_INTEREST_ITEM_ADDRESS(item) : \
|
||||
(((TargetType) == TARGET_TYPE_AR6006) ? AR6006_HOST_INTEREST_ITEM_ADDRESS(item) : \
|
||||
(((TargetType) == TARGET_TYPE_AR9888) ? AR9888_HOST_INTEREST_ITEM_ADDRESS(item) : \
|
||||
(((TargetType) == TARGET_TYPE_AR6320) ? AR6320_HOST_INTEREST_ITEM_ADDRESS(item) : \
|
||||
(((TargetType) == TARGET_TYPE_AR6320V2) ? AR6320_HOST_INTEREST_ITEM_ADDRESS(item) : \
|
||||
(((TargetType) == TARGET_TYPE_AR900B) ? AR900B_HOST_INTEREST_ITEM_ADDRESS(item) : \
|
||||
0))))))))
|
||||
(((TargetType) == TARGET_TYPE_AR6003) ? AR6003_HOST_INTEREST_ITEM_ADDRESS(item) : \
|
||||
(((TargetType) == TARGET_TYPE_AR6004) ? AR6004_HOST_INTEREST_ITEM_ADDRESS(item) : \
|
||||
(((TargetType) == TARGET_TYPE_AR6006) ? AR6006_HOST_INTEREST_ITEM_ADDRESS(item) : \
|
||||
(((TargetType) == TARGET_TYPE_AR9888) ? AR9888_HOST_INTEREST_ITEM_ADDRESS(item) : \
|
||||
(((TargetType) == TARGET_TYPE_AR6320) ? AR6320_HOST_INTEREST_ITEM_ADDRESS(item) : \
|
||||
(((TargetType) == TARGET_TYPE_AR900B) ? AR900B_HOST_INTEREST_ITEM_ADDRESS(item) : \
|
||||
0)))))))
|
||||
|
||||
#define AR6002_BOARD_DATA_SZ 768
|
||||
#define AR6002_BOARD_EXT_DATA_SZ 0
|
||||
@@ -639,6 +664,8 @@ PREPACK64 struct host_interest_s {
|
||||
#define AR9888_BOARD_EXT_DATA_SZ 0
|
||||
#define AR6320_BOARD_DATA_SZ 8192
|
||||
#define AR6320_BOARD_EXT_DATA_SZ 0
|
||||
#define QCA9377_BOARD_DATA_SZ 8192
|
||||
#define QCA9377_BOARD_EXT_DATA_SZ 0
|
||||
#define AR900B_BOARD_DATA_SZ 7168
|
||||
#define AR900B_BOARD_EXT_DATA_SZ 0
|
||||
|
||||
|
||||
Reference in New Issue
Block a user