disp: msm: sde: add kalama mdss version support

Add kalama mdss revision and enable features based
on the hardware capability.

Change-Id: I27dff07b00ba16d313c5c8dc2661a10e522daea5
Signed-off-by: Jeykumar Sankaran <[email protected]>

msm/sde/sde_hw_catalog.c

@@ -5087,6 +5087,39 @@ static int _sde_hardware_pre_caps(struct sde_mdss_cfg *sde_cfg, uint32_t hw_rev)
 		set_bit(SDE_FEATURE_VBIF_DISABLE_SHAREABLE, sde_cfg->features);
 		set_bit(SDE_FEATURE_DITHER_LUMA_MODE, sde_cfg->features);
 		sde_cfg->mdss_hw_block_size = 0x158;
+	} else if (IS_KALAMA_TARGET(hw_rev)) {
+		set_bit(SDE_FEATURE_DEDICATED_CWB, sde_cfg->features);
+		set_bit(SDE_FEATURE_CWB_DITHER, sde_cfg->features);
+		set_bit(SDE_FEATURE_WB_UBWC, sde_cfg->features);
+		set_bit(SDE_FEATURE_CWB_CROP, sde_cfg->features);
+		set_bit(SDE_FEATURE_QSYNC, sde_cfg->features);
+		set_bit(SDE_FEATURE_3D_MERGE_RESET, sde_cfg->features);
+		set_bit(SDE_FEATURE_HDR_PLUS, sde_cfg->features);
+		set_bit(SDE_FEATURE_INLINE_SKIP_THRESHOLD, sde_cfg->features);
+		set_bit(SDE_MDP_DHDR_MEMPOOL_4K, &sde_cfg->mdp[0].features);
+		set_bit(SDE_FEATURE_VIG_P010, sde_cfg->features);
+		set_bit(SDE_FEATURE_VBIF_DISABLE_SHAREABLE, sde_cfg->features);
+		set_bit(SDE_FEATURE_DITHER_LUMA_MODE, sde_cfg->features);
+		set_bit(SDE_FEATURE_SYSCACHE, sde_cfg->features);
+		set_bit(SDE_FEATURE_MULTIRECT_ERROR, sde_cfg->features);
+		set_bit(SDE_FEATURE_FP16, sde_cfg->features);
+		set_bit(SDE_MDP_PERIPH_TOP_0_REMOVED, &sde_cfg->mdp[0].features);
+		set_bit(SDE_FEATURE_DEMURA, sde_cfg->features);
+		set_bit(SDE_FEATURE_UBWC_STATS, sde_cfg->features);
+		set_bit(SDE_FEATURE_HW_VSYNC_TS, sde_cfg->features);
+		set_bit(SDE_FEATURE_AVR_STEP, sde_cfg->features);
+		sde_cfg->allowed_dsc_reservation_switch = SDE_DP_DSC_RESERVATION_SWITCH;
+		sde_cfg->perf.min_prefill_lines = 40;
+		sde_cfg->vbif_qos_nlvl = 8;
+		sde_cfg->ts_prefill_rev = 2;
+		sde_cfg->ctl_rev = SDE_CTL_CFG_VERSION_1_0_0;
+		sde_cfg->true_inline_rot_rev = SDE_INLINE_ROT_VERSION_2_0_1;
+		sde_cfg->uidle_cfg.uidle_rev = SDE_UIDLE_VERSION_1_0_2;
+		sde_cfg->mdss_hw_block_size = 0x158;
+		sde_cfg->demura_supported[SSPP_DMA1][0] = 0;
+		sde_cfg->demura_supported[SSPP_DMA1][1] = 1;
+		sde_cfg->demura_supported[SSPP_DMA3][0] = 0;
+		sde_cfg->demura_supported[SSPP_DMA3][1] = 1;
 	} else {
 		SDE_ERROR("unsupported chipset id:%X\n", hw_rev);
 		sde_cfg->perf.min_prefill_lines = 0xffff;

msm/sde/sde_hw_catalog.h

@@ -49,6 +49,7 @@
 #define SDE_HW_VER_700	SDE_HW_VER(7, 0, 0) /* lahaina */
 #define SDE_HW_VER_720	SDE_HW_VER(7, 2, 0) /* yupik */
 #define SDE_HW_VER_810	SDE_HW_VER(8, 1, 0) /* waipio */
+#define SDE_HW_VER_900	SDE_HW_VER(9, 0, 0) /* kalama */
 
 /* Avoid using below IS_XXX macros outside catalog, use feature bit instead */
 #define IS_SDE_MAJOR_SAME(rev1, rev2)   \
@@ -75,6 +76,7 @@
 #define IS_LAHAINA_TARGET(rev) IS_SDE_MAJOR_MINOR_SAME((rev), SDE_HW_VER_700)
 #define IS_YUPIK_TARGET(rev) IS_SDE_MAJOR_MINOR_SAME((rev), SDE_HW_VER_720)
 #define IS_WAIPIO_TARGET(rev) IS_SDE_MAJOR_MINOR_SAME((rev), SDE_HW_VER_810)
+#define IS_KALAMA_TARGET(rev) IS_SDE_MAJOR_MINOR_SAME((rev), SDE_HW_VER_900)
 
 #define SDE_HW_BLK_NAME_LEN	16