Allow these devices to send CPU hints to PowerHAL from SF to reduce
drops and save power.
Bug: b/241152899
Bug: b/195990840
Test: https://android-build.googleplex.com/builds/abtd/run/L70800000956157278
Change-Id: I81df99f4ec01f417d1589e2323de599819993590
(Port from commit 8a419466b86ab07a25fc18d7d6a2a9ee154f6839)
sys.boot_completed may take more time to be set in the first
boot after factory reset. It will cause wifi framework try
to enable wifi before driver ready. Move the timing of driver
initialization forward to all modules ready.
Bug: 242681939
Bug: 240889310
Test: wifi enables after booting
Change-Id: I97d742ffe9723d2fc09f370f3d98dfdc4413af61
C10/P10 move the haptic from system_ser to sysui. Align this behavior on
L10
BUG: 242661137
Test: Check the face unlock haptic of L10 is the same with C10/P10
Change-Id: If1501ede19bff1a821c9d12d5c305085b618b4c3
1. change Re0 range from Typical+/- 15% to +/-10% for factory build
Files from the latest attachment on b/243387067
Bug: 243387067
Test: verified by hardware engineers
Change-id: Ife86a6093d6e87224f432cb9b89c8f0c593cfe37
- Separate thermal config for charger mode and remove the unused thermal
throttling.
Bug: 240897207
Test: usbc overheating protection and charging throttling worked
properly in charger.
Change-Id: Ib970c16c0ed08b52fb2c9387b71cb2211f4bc1f3
Remove "Hidden" to enable VIRTUAL-CHARGE sensor for thermalservice,
So that thermal_recorder can record the temperature and seveirty for
tuning.
Bug: 242944140
Test: thermalservice can read VIRTUAL CHARGE sensors.
Temperature{mValue=26.606302, mType=3, mName=VIRTUAL-SKIN, mStatus=0}
Temperature{mValue=26.577953, mType=-1, mName=VIRTUAL-SKIN-CHARGE, mStatus=0}
Temperature{mValue=26.92495, mType=-1, mName=VIRTUAL-SKIN-CHARGE-WLC, mStatus=0}
Change-Id: Icc38895d19ff7d89e307e96c2b35e26d43c1a753
1) Based on Proto1.0 and 1.1 thermal result to modify VIRTUAL-SKIN formula v0.4.
2) Add WLAN and DISPLAY odpm power rail in PARTIAL_SYSTEM_POWER
3) Enable USB overheat protection polling log 3 degC earlier.
4) Set the cdev_ceiling for CPU/GPU to avoid the abnormal throttling request when ODPM has issue.
5) Move target temperature from 45 degC to 41 degC.
Bug: 236562040
Test: ThermalHAL throttling worked properly
Change-Id: I78ec8c1fe44f3674d4f578c8e48a50f004c406f3
I put L10 EVT tuning files in the attached file.
L10 EVT HW modify Proto speaker.
I need to re-tune mps file.
I base on EVT speaker make this mps file tuning.
And slightly lower volume step 21th to let volume curve smoothly.
So, I modify audio_policy.xml file.
Files from the latest attachment on b/242521368
Bug: 242153654
Bug: 242521368
Test: verified by hardware engineers
Change-id: Ide63f88ee7aa55f4b79c53de2d70314bc20ab285
Test: -
- SI SUPL Wifi on + mobile network off
- SI SUPL Wifi on + mobile network on
- SI SUPL Wifi off + mobile network on
- SI SUPL Wifi on + airplane mode on
Bug: 239671126
Change-Id: I308f7501085be765c3cdcc9858b93e98554b2bc3
Change list :
1. adjust IIR1 as main filter for flat FR in camcorder path.
2. for camcorder path, implement all 6 scenarios with same parameters except linear gain module, and use linear gain to swap channels.
3. fine tune and swap the channels in mic path.
Files from the latest attachment on b/241720915
Bug: 241498250
Bug: 241720915
Test: verified by hardware engineers
Change-id: Iea93f2d118c30bcd83c44c2227ce68a3bfa8074d
Change list:
1. Bot spekaer model for EVT version
Bug: 223513454
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: I9b0e79d296328e790b01e33f84d86aa18b572d8f
Change list
1. modify Rtrace in cali/diag.bin
Bug: 223513454
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: Ia6f0c6346b58f6e149a7fbe41f360d4ac92d99f9
This is covered by parent projects.
Bug: 232461104
Test: Ensure Adaptive Charging/Battery health flags works as expected
Change-Id: I4f8bf22fc2cbde580d1fa4058210b357f24c2bb5
Merged-In: If97f5a5f3f082e2066f1d512f449fcbb295b50f2
This device uses QC solution on Bluetooth Remove support of
Bluetooth state residency data provider from PowerStatsHAL
on this device.
Bug: 231395549
Test: dumpsys android.hardware.power.stats.IPowerStats/default
Change-Id: I1248e2cd74cbeac4f0f9cf727e8bdee9a925fa05
Signed-off-by: Darren Hsu <darrenhsu@google.com>
We will have a 'vendor' project containing proprietary blobs
to be able to build and flash Pixel device when vendor source is not
available.
The project name is
platform/vendor/aosp/google_devices/lynx
and the path is
vendor/google_devices/lynx
TEST:make
BUG: 240203789
Change-Id: I33af4dce2b60f5de21d8998e445d2f8abd2b7e01
turn on st33spi when persist.vendor.se.ese2.mode is set to ctsmode
Bug: 239657021
Bug: 239655807
Test: VtsHalSecureElementV1_2TargetTest,
VtsHalSecureElementV1_1TargetTest,
VtsHalSecureElementV1_0TargetTest,
CtsOmapiTestCases
Change-Id: Ifd96d96068f49d85879efdd3d11a7067f71ee907
This CL sets the MIF min clock frequency to 1539MHz, which based on
initial ODPM and MIPS measurements shows benefit both in terms of power
consumption and cycles-per-instructions (CPI), reducing the gap with R4
device.
L10 power and performance impact tests will update on the bug.
Bug: 239651545
Test: Build pass, GCA
Change-Id: I1b057f187e45bad46f4661bd5673f0f88aab3a93
