INTERACTION is removed but some actions still use it.
Bug: 246738037
Test: pts-tradefed run commandAndExit pts -m PtsPerformanceTestCases -t
com.google.android.perf.pts.PowerHintJsonVerifyTest
Change-Id: Id7028106ac7ff1d41dc7d325aad5fa4d69bc2a54
Bug: 241353178
Test: check the value after device boot up
Test: update PtsHapticsTestCases and run it
Signed-off-by: Chase Wu <chasewu@google.com>
Change-Id: Iab9f64d19bd1be6a162aef008c6f77bb48dd64ae
Merged-In: Iab9f64d19bd1be6a162aef008c6f77bb48dd64ae
wifi framework try to enable wifi before sys.boot_completed
after factory reset. It causes fs_ready never to be written.
Move the timing of fs_ready to be written when all modules ready.
Bug: 244411535
Bug: 243876449
Test: reboot stress and factory reset stress test are passed.
Change-Id: I1cac269ec6ed6eee5f34e72186c566c8cddd4925
Based on EVT1.0 thermal results to adjust virtual sensor formula and
WLC charging throttling.
- Virtual-skin version v0.5
- Switch on temp 35C, target temp 39C, spower 2000
Bug: 236562040
Test: ThermalHAL throttling worked properly
Change-Id: I4fb4a5da702a9b904a7377df55f0bb362c74199d
Change List :
Fortemedia:
Handset :
Optimal performance for Generic/TMOUS Handset NB/WB/SWB (TMO tuning / AMS tuning)
Sync TX setting to HAC / TMO-HAC / HAC Reserve 2 SWB
Files from the latest attachment on b/246260083
Bug: 246260083
Test: verified by hardware engineers
Change-id: I8ea1537737620b8b2de9921b804c16abc226c027
Disable wireless charging during drain, usb charging,
and charger stress test
- vendor.disable.wlc 1
If device is placed onto dreamliner and shutdwon(drain out),
it would boot up by DC_CHG and keep shutdown(0%)-boot up
(by DC_CHG) continuously. To avoid this symptom, limit wireless
current_max as 75000 after device boot up
- persist.vendor.limit.wlc.current=1
How to verify:
adb shell setprop vendor.disable.wlc 1
adb shell cat /sys/class/power_supply/wireless/online >>>> 0
adb shell setprop persist.vendor.limit.wlc.current 1
adb shell cat /sys/class/power_supply/dc/current_max >>>> 75000
Bug: 230436380
Test: set the property manually and query the result from file node.
Change-Id: I5bcf9baeb2818b439520167b518b2e5c5224d7e2
Signed-off-by: Ken Tsou <kentsou@google.com>
(synced from commit 27b511c30292214dbb07f3009cbca8dee941f7f2)
With systemui now changed its cpuset in early stage, we no longer
need RestrictedCpuset hint as workaround.
Bug: 242775562
Test: build pass
Change-Id: I8075188e82295f45fb7df1a88769eef37e7aec81
Change List :
Fortemedia:
Handset HAC:
Update EVT tuning for HAC mode T-coil signal testing FR failure
Handheld mode:
Sync Reserve 2 SWB setting to custom 1 (VoIP-EC-off) / custom 2 (VoIP-NR-off) / reserve 1 (VoIP-NREC-off) and disable NREC for related setting.
Files from the latest attachment on b/244539071
Bug: 244539071
Test: verified by hardware engineers
Change-id: I0b131b7e2afe69ff24bb30dfbf18812d4329d32e
Move lhd.conf, scd.conf to device folder and maintain them separately by project requirement
Bug: 244258007
Test: confirm the configurations are correct
Change-Id: Ic7693f87df73e01d8dcfbda1ff224eb47e7df87a
Allow these devices to send CPU hints to PowerHAL from SF to reduce
drops and save power.
Bug: b/241152899
Bug: b/195990840
Test: https://android-build.googleplex.com/builds/abtd/run/L70800000956157278
Change-Id: I81df99f4ec01f417d1589e2323de599819993590
(Port from commit 8a419466b86ab07a25fc18d7d6a2a9ee154f6839)
sys.boot_completed may take more time to be set in the first
boot after factory reset. It will cause wifi framework try
to enable wifi before driver ready. Move the timing of driver
initialization forward to all modules ready.
Bug: 242681939
Bug: 240889310
Test: wifi enables after booting
Change-Id: I97d742ffe9723d2fc09f370f3d98dfdc4413af61
C10/P10 move the haptic from system_ser to sysui. Align this behavior on
L10
BUG: 242661137
Test: Check the face unlock haptic of L10 is the same with C10/P10
Change-Id: If1501ede19bff1a821c9d12d5c305085b618b4c3
1. change Re0 range from Typical+/- 15% to +/-10% for factory build
Files from the latest attachment on b/243387067
Bug: 243387067
Test: verified by hardware engineers
Change-id: Ife86a6093d6e87224f432cb9b89c8f0c593cfe37
- Separate thermal config for charger mode and remove the unused thermal
throttling.
Bug: 240897207
Test: usbc overheating protection and charging throttling worked
properly in charger.
Change-Id: Ib970c16c0ed08b52fb2c9387b71cb2211f4bc1f3
Remove "Hidden" to enable VIRTUAL-CHARGE sensor for thermalservice,
So that thermal_recorder can record the temperature and seveirty for
tuning.
Bug: 242944140
Test: thermalservice can read VIRTUAL CHARGE sensors.
Temperature{mValue=26.606302, mType=3, mName=VIRTUAL-SKIN, mStatus=0}
Temperature{mValue=26.577953, mType=-1, mName=VIRTUAL-SKIN-CHARGE, mStatus=0}
Temperature{mValue=26.92495, mType=-1, mName=VIRTUAL-SKIN-CHARGE-WLC, mStatus=0}
Change-Id: Icc38895d19ff7d89e307e96c2b35e26d43c1a753
1) Based on Proto1.0 and 1.1 thermal result to modify VIRTUAL-SKIN formula v0.4.
2) Add WLAN and DISPLAY odpm power rail in PARTIAL_SYSTEM_POWER
3) Enable USB overheat protection polling log 3 degC earlier.
4) Set the cdev_ceiling for CPU/GPU to avoid the abnormal throttling request when ODPM has issue.
5) Move target temperature from 45 degC to 41 degC.
Bug: 236562040
Test: ThermalHAL throttling worked properly
Change-Id: I78ec8c1fe44f3674d4f578c8e48a50f004c406f3
I put L10 EVT tuning files in the attached file.
L10 EVT HW modify Proto speaker.
I need to re-tune mps file.
I base on EVT speaker make this mps file tuning.
And slightly lower volume step 21th to let volume curve smoothly.
So, I modify audio_policy.xml file.
Files from the latest attachment on b/242521368
Bug: 242153654
Bug: 242521368
Test: verified by hardware engineers
Change-id: Ide63f88ee7aa55f4b79c53de2d70314bc20ab285
Test: -
- SI SUPL Wifi on + mobile network off
- SI SUPL Wifi on + mobile network on
- SI SUPL Wifi off + mobile network on
- SI SUPL Wifi on + airplane mode on
Bug: 239671126
Change-Id: I308f7501085be765c3cdcc9858b93e98554b2bc3
Change list :
1. adjust IIR1 as main filter for flat FR in camcorder path.
2. for camcorder path, implement all 6 scenarios with same parameters except linear gain module, and use linear gain to swap channels.
3. fine tune and swap the channels in mic path.
Files from the latest attachment on b/241720915
Bug: 241498250
Bug: 241720915
Test: verified by hardware engineers
Change-id: Iea93f2d118c30bcd83c44c2227ce68a3bfa8074d
Change list:
1. Bot spekaer model for EVT version
Bug: 223513454
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: I9b0e79d296328e790b01e33f84d86aa18b572d8f
Change list
1. modify Rtrace in cali/diag.bin
Bug: 223513454
Test: manual
Signed-off-by: Yung Ti Su <andysu@google.com>
Change-Id: Ia6f0c6346b58f6e149a7fbe41f360d4ac92d99f9
This is covered by parent projects.
Bug: 232461104
Test: Ensure Adaptive Charging/Battery health flags works as expected
Change-Id: I4f8bf22fc2cbde580d1fa4058210b357f24c2bb5
Merged-In: If97f5a5f3f082e2066f1d512f449fcbb295b50f2
