sm8450-common: Decommonize NFC configs

proprietary/vendor/etc/libnfc-SN220.conf

@@ -1,617 +0,0 @@
-#################### This file is used by NXP NFC NCI HAL #####################
-###############################################################################
-# Application options
-# Logging Levels
-# NXPLOG_DEFAULT_LOGLEVEL    0x01
-# ANDROID_LOG_DEBUG          0x03
-# ANDROID_LOG_WARN           0x02
-# ANDROID_LOG_ERROR          0x01
-# ANDROID_LOG_SILENT         0x00
-NXPLOG_EXTNS_LOGLEVEL=0x03
-NXPLOG_NCIHAL_LOGLEVEL=0x03
-NXPLOG_NCIX_LOGLEVEL=0x03
-NXPLOG_NCIR_LOGLEVEL=0x03
-NXPLOG_FWDNLD_LOGLEVEL=0x03
-NXPLOG_TML_LOGLEVEL=0x03
-NFC_DEBUG_ENABLED=1
-
-###############################################################################
-# Nfc Device Node name
-NXP_NFC_DEV_NODE="/dev/nq-nci"
-
-#################################################################################
-#VEN Toggle Config
-#Disable = 0x00
-#Enable  = 0x01
-ENABLE_VEN_TOGGLE=0x00
-
-###############################################################################
-# Extension for Mifare reader enable
-MIFARE_READER_ENABLE=0x01
-
-###############################################################################
-# Mifare Reader implementation
-# 0: General implementation
-# 1: Legacy implementation
-LEGACY_MIFARE_READER=0
-
-###############################################################################
-# System clock source selection configuration
-#define CLK_SRC_XTAL       1
-#define CLK_SRC_PLL        2
-NXP_SYS_CLK_SRC_SEL=0x02
-
-###############################################################################
-# System clock frequency selection configuration
-#define CLK_FREQ_13MHZ         1
-#define CLK_FREQ_19_2MHZ       2
-#define CLK_FREQ_24MHZ         3
-#define CLK_FREQ_26MHZ         4
-#define CLK_FREQ_38_4MHZ       5
-#define CLK_FREQ_52MHZ         6
-NXP_SYS_CLK_FREQ_SEL=0x02
-
-###############################################################################
-# The timeout value to be used for clock request acknowledgment
-# min value = 0x01 to max = 0x06
-#NXP_SYS_CLOCK_TO_CFG=0x06
-
-###############################################################################
-# The delay to try to start PLL/XTAL when using sys clock 256/fc units = ~18.8 us
-# min value = 0x01 to max = 0x1F
-#NXP_CLOCK_REQ_DELAY=0x16
-
-###############################################################################
-# NXP proprietary settings
-NXP_ACT_PROP_EXTN={2F, 02, 00}
-
-###############################################################################
-# NXP TVDD configurations settings
-# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported,
-# out of them only one can be configured at a time.
-#NXP_EXT_TVDD_CFG=0x02
-
-###############################################################################
-#config1:SLALM, 3.3V for both RM and CM
-#NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C}
-
-###############################################################################
-#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM,
-#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms
-#NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C}
-#NXP_EXT_TVDD_CFG_2={20, 02, 30, 01, A0, 0E, 2C, F0, 00, 3E, 11, E4, E4, E4, 00, 00, 00, 00, 00, A7, 8E, FF, FF, 0F, 0F, 0F, 0F, 0A, 00, 00, 00, 00, 02, 00, 00, 01, 00, 10, 00, 04, 00, 00, 00, 17, 40, 20, 07, 13, 07, 05, 13}
-
-###############################################################################
-# Core configuration rf field filter settings to enable set to 01 to disable set
-# to 00 last bit
-#NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00 }
-
-###############################################################################
-# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set
-# to 0x00
-#NXP_I2C_FRAGMENTATION_ENABLED=0x00
-
-###############################################################################
-#set autonomous mode
-# disable autonomous 0x00
-# enable autonomous  0x01
-NXP_AUTONOMOUS_ENABLE=0x00
-###############################################################################
-#set Guard Timer
-# Gurad Timer range to 0x0F-0xFF(i.e.15-255 seconds)
-NXP_GUARD_TIMER_VALUE=0x0F
-###############################################################################
-#Enable SWP full power mode when phone is power off
-#NXP_SWP_FULL_PWR_ON=0x00
-
-################################################################################
-#This is used to configure UICC2 at boot time.
-# UICC2              0x03
-NXP_DEFAULT_UICC2_SELECT=0x03
-###############################################################################
-# CE when Screen state is locked
-# This setting is for DEFAULT_AID_ROUTE,
-# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE
-# Disable           0x00
-# Enable            0x01
-NXP_CE_ROUTE_STRICT_DISABLE=0x01
-
-###############################################################################
-#SCR Read Tag Operation Timeout in secs
-NXP_SWP_RD_TAG_OP_TIMEOUT=20
-
-###############################################################################
-#Set the default AID route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_AID_ROUTE=0x01
-
-###############################################################################
-#Set the ISODEP (Mifare Desfire) route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_ISODEP_ROUTE=0x01
-
-###############################################################################
-#Set the Mifare CLT route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_MIFARE_CLT_ROUTE=0x01
-
-###############################################################################
-#Set the Felica CLT route Location :
-#This settings will be used when application does not set this parameter
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_FELICA_CLT_ROUTE=0x01
-
-###############################################################################
-#Set the default AID Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_AID_PWR_STATE=0x39
-###############################################################################
-#Set the Mifare Desfire Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_DESFIRE_PWR_STATE=0x3B
-
-###############################################################################
-#Set the Mifare CLT Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_MIFARE_CLT_PWR_STATE=0x3B
-
-###############################################################################
-#Set the Felica CLT Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_FELICA_CLT_PWR_STATE=0x3B
-
-###############################################################################
-#Set the T4TNfcee AID Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_T4TNFCEE_AID_POWER_STATE=0x3B
-
-###############################################################################
-#Set the default Felica T3T System Code OffHost route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_SYS_CODE_ROUTE=0x00
-###############################################################################
-# AID Matching platform options
-# AID_MATCHING_L 0x01
-# AID_MATCHING_K 0x02
-#AID_MATCHING_PLATFORM=0x01
-
-###############################################################################
-# P61 interface options
-# SPI 0x02
-NXP_P61_LS_DEFAULT_INTERFACE=0x00
-
-###############################################################################
-#CHINA_TIANJIN_RF_SETTING
-#Enable  0x01
-#Disable  0x00
-#NXP_CHINA_TIANJIN_RF_ENABLED=0x01
-
-###############################################################################
-#SWP_SWITCH_TIMEOUT_SETTING
-# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60].
-# Timeout in milliseconds, for example
-# No Timeout  0x00
-# 10 millisecond timeout 0x0A
-#NXP_SWP_SWITCH_TIMEOUT=0x0A
-
-###############################################################################
-# Flashing Options Configurations
-# FLASH_UPPER_VERSION 0x01
-# FLASH_DIFFERENT_VERSION 0x02
-# FLASH_ALWAYS 0x03
-NXP_FLASH_CONFIG=0x02
-
-###############################################################################
-# P61 interface options for JCOP Download
-# SPI 0x02
-NXP_P61_JCOP_DEFAULT_INTERFACE=0x00
-
-###############################################################################
-# Option to perform LS update every boot
-# Enable 0x01
-# Disable    0x00
-NXP_LS_FORCE_UPDATE_REQUIRED=0x00
-
-###############################################################################
-# Option to perform JCOP update every boot
-# Enable 0x01
-# Disable 0x00
-NXP_JCOP_FORCE_UPDATE_REQUIRED=0x00
-
-###############################################################################
-# Bail out mode
-#  If set to 1, NFCC is using bail out mode for either Type A or Type B poll.
-#  Set this parameter value to 1 if Android Beam is enabled, else set to 0.
-NFA_POLL_BAIL_OUT_MODE=0x00
-
-###############################################################################
-# White list of Hosts
-# This values will be the Hosts(NFCEEs) in the HCI Network.
-DEVICE_HOST_WHITE_LIST={C0, 80}
-
-###############################################################################
-# Choose the presence-check algorithm for type-4 tag.  If not defined, the default value is 1.
-# 0  NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
-# 1  NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
-# 2 NFA_RW_PRES_CHK_ISO_DEP_NAK; Type - 4 tag protocol iso-dep nak presence check
-#    command is sent waiting for rsp and ntf.
-PRESENCE_CHECK_ALGORITHM=2
-###############################################################################
-# Options to Fallback to alternative route
-# Disable           0x00
-# DH                0x01
-# ESE               0x02
-NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
-###############################################################################
-# Vendor Specific Proprietary Protocol & Discovery Configuration
-# Set to 0xFF if unsupported
-#  byte[0] NCI_PROTOCOL_18092_ACTIVE
-#  byte[1] NCI_PROTOCOL_B_PRIME
-#  byte[2] NCI_PROTOCOL_DUAL
-#  byte[3] NCI_PROTOCOL_15693
-#  byte[4] NCI_PROTOCOL_KOVIO
-#  byte[5] NCI_PROTOCOL_MIFARE
-#  byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
-#  byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
-#  byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
-NFA_PROPRIETARY_CFG={05, FF, FF, 06, 81, 80, FF, FF, FF}
-
-###############################################################################
-#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE
-#Enable/Disable block number checks for china transit use case
-#Enable  0x01
-#Disable  0x00
-#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01
-
-################################################################################
-#This flags will enable different modes of Lx Debug based on bits of the Byte0
-#Byte 0:
-# |_________Bit Mask_______|   Debug Mode
-#  b7|b6|b5|b4|b3|b2|b1|b0|
-#    |  |x |  |  |  |  |  |    Modulation Detected Notification
-#    |  |  |X |  |  |  |  |    Enable L1 Events (ISO14443-4, ISO18092)
-#    |  |  |  |X |  |  |  |    Enable L2 Reader Events(ROW specific)
-#    |  |  |  |  |X |  |  |    Enable Felica SystemCode
-#    |  |  |  |  |  |X |  |    Enable Felica RF (all Felica CM events)
-#    |  |  |  |  |  |  |X |    Enable L2 Events CE (ISO14443-3, RF Field ON/OFF)
-#Byte 1: RFU, shall always be 0x00
-#                              Byte1    Byte0
-#                                  \__ __/
-# e.g. NXP_CORE_PROP_SYSTEM_DEBUG=0x0031 ==> Modulation detected, L1, L2 CE
-NXP_CORE_PROP_SYSTEM_DEBUG=0x0000
-
-###############################################################################
-#Enable NXP NCI runtime parser library
-#Enable 0x01
-#Disable 0x00
-NXP_NCI_PARSER_LIBRARY=0x00
-
-###############################################################################
-# Timeout value in milliseconds for JCOP OS download to complete
-OS_DOWNLOAD_TIMEOUT_VALUE=60000
-
-###############################################################################
-# Forcing HOST to listen for a selected protocol
-# 0x00 : Disable Host Listen
-# 0x01 : Enable Host to Listen (A)  for ISO-DEP tech A
-# 0x02 : Enable Host to Listen (B)  for ISO-DEP tech B
-# 0x04 : Enable Host to Listen (F)  for T3T Tag Type Protocol tech F
-# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F
-HOST_LISTEN_TECH_MASK=0x07
-
-###############################################################################
-# Enable forward functionality
-# Disable           0x00
-# Enable            0x01 //Any positive value as per below bit configuration
-# HOST power states when type A/B only UICC present
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-FORWARD_FUNCTIONALITY_ENABLE=0x01
-
-###############################################################################
-# Configure the NFC Extras to open and use a static pipe.  If the value is
-# not set or set to 0, then the default is use a dynamic pipe based on a
-# destination gate (see NFA_HCI_DEFAULT_DEST_GATE).  Note there is a value
-# for each EE (ESE/SIM1/SIM2)
-OFF_HOST_ESE_PIPE_ID=0x16
-OFF_HOST_SIM_PIPE_ID=0x0A
-OFF_HOST_SIM2_PIPE_ID=0x23
-
-###############################################################################
-#Set the Felica T3T System Code Power state :
-#This settings will be used when application does not set this parameter
-#Update Power state as per NCI2.0
-DEFAULT_SYS_CODE_PWR_STATE=0x00
-###############################################################################
-#Default Secure Element route id
-DEFAULT_OFFHOST_ROUTE=0x01
-
-###############################################################################
-#Maximum SMB transceive wait for response
-NXP_SMB_TRANSCEIVE_TIMEOUT=2000
-###############################################################################
-# Firmware file type
-#.so file   0x01
-#.bin file  0x02
-NXP_FW_TYPE=0x01
-############################################################################
-# Extended APDU length for ISO_DEP
-ISO_DEP_MAX_TRANSCEIVE=0xFEFF
-#########################################################################
-# Support for Amendment I SEMS specification
-# Support SEMS Amendment I 0x01
-# Support NXP LS client    0x00
-NXP_GP_AMD_I_SEMS_SUPPORTED=0x01
-###############################################################################
-#All eSE terminals shall be match with the  /vendor/etc/vintf/manifest.xml file
-#under android.hardware.secure_element.
-# The terminal name shall start from 1
-# Assign terminal number to each interface based on system config
-NXP_SPI_SE_TERMINAL_NUM="eSE1"
-###############################################################################
-# Assign terminal number to each interface based on system config
-#NXP_VISO_SE_TERMINAL_NUM="eSE3"
-###############################################################################
-# Assign terminal number to each interface based on system config
-NXP_NFC_SE_TERMINAL_NUM="eSE2"
-###############################################################################
-#For static or dynamic dual UICC feature support
-#Enable static dual uicc feature by setting value 0x00
-#Enable dynamic dual uicc feature by setting value 0x01
-NXP_DUAL_UICC_ENABLE=0x01
-###############################################################################
-# Time to wait by DH when NFCC will report eSE Cold Temp Error.
-# The value is as per the UM and in seconds
-NXP_SE_COLD_TEMP_ERROR_DELAY=0x05
-
-###############################################################################
-# Set configuration optimization decision setting
-# Enable    = 0x01
-# Disable   = 0x00
-NXP_SET_CONFIG_ALWAYS=0x00
-
-###############################################################################
-#OffHost ESE route location for MultiSE
-#ESE = 01
-OFFHOST_ROUTE_ESE={01}
-
-###############################################################################
-#OffHost UICC route location for MultiSE
-#UICC1 = 02
-#UICC2 = 03
-OFFHOST_ROUTE_UICC={02:03}
-
-###############################################################################
-#T4T NFCEE ENABLE
-#bit pos 0 = T4T NFCEE Enable
-#bit pos 6 = T4T NFCEE Contactless write enable
-#bit pos 7 = Proprietary file enable
-NXP_T4T_NFCEE_ENABLE=0x01
-
-###############################################################################
-#WLC mode
-#0x00 = if WLC Application running in MW (non-autonomous mode)
-#0x01 = if WLC Application running in FW (autonomous mode)
-NXP_WLC_MODE=0x01
-
-###############################################################################
-#CORE_SET_CONF_CMD to reset Prop Emvco Flag
-NXP_PROP_RESET_EMVCO_CMD={20, 02, 05, 01, A0, 44, 01, 00}
-
-###############################################################################
-#Guard time in ms for the mPOS/SCR module to process the reader start/stop req
-NXP_RDR_REQ_GUARD_TIME=0
-
-###############################################################################
-#MW workaround to enable LPCD when EMVCO polling mode starts and disable
-#while switching back to NFC Forum mode
-# 0 --> Disable MW workaround
-# 1 --> Enable MW workaround
-# 2 --> Use this option only for FW versions below 1.10.52
-NXP_RDR_DISABLE_ENABLE_LPCD=1
-
-###############################################################################
-# Firmware patch format, Only 1 and 5 should be set
-#   0 -> NFC Default
-#   1 -> EMVCO Default
-#   3 -> EMVCO Polling, DISC_IDLE = POWER_OFF, DISC DEACTIVATE =  Removal process
-#   5 -> EMVCO Cert Polling, DISC_IDLE = Removal process  , DISC DEACTIVATE =   POWER_OFF
-#   7 -> EMVCO Polling, DISC_IDLE = POWER_OFF, DISC DEACTIVATE =  POWER_OFF
-NFA_CONFIG_FORMAT=1
-
-################################################################################
-# Enable disconnect tag in screen off
-# Disable           0x00
-# Enable            0x01
-NXP_DISCONNECT_TAG_IN_SCRN_OFF=0x01
-
-#################################################################################
-# Core configuration extensions
-# It includes
-# Wired mode settings A0ED, A0EE
-# Tag Detector A040, A041, A043
-# Low Power mode A007
-# Clock settings A002, A003
-# PbF settings A008
-# Clock timeout settings A004
-# eSE (SVDD) PWR REQ settings A0F2
-# Window size A0D8
-# DWP Speed   A0D5
-# How eSE connected to PN553 A012
-# UICC2 bit rate A0D1
-# SWP1A interface A0D4
-# DWP intf behavior config, SVDD Load activated by default if set to 0x31 A037
-# Low power tag detection LPTD for power reduction A068
-NXP_CORE_CONF_EXTN={20, 02, 3A, 04,
-    A0, EC, 01, 01,
-    A0, ED, 01, 01,
-    A0, 68, 2A, 06, 40, 60, 03, 19, 00, 00, 00, 00, 82, 04, 00, 00, 02, 00, 0F, 00, 02, 00, 0F, A0, 00, A0, 00, 03, FA, 00, 00, 00, 4C, 00, 14, 00, 7D, 00, 05, 7F, 00, 00, 01, 00, 03,
-    A0, 0A, 01, 0A
-}
-#       A0, F2, 01, 01,
-#       A0, 40, 01, 01,
-#       A0, 41, 01, 02,
-#       A0, 43, 01, 04,
-#       A0, 02, 01, 01,
-#       A0, 03, 01, 11,
-#       A0, 07, 01, 03,
-#       A0, 08, 01, 01
-#       }
-
-###############################################################################
-# Core configuration settings
-# Below params are not recommended to add in CONF block.
-# LA_BIT_FRAME_SDD(0x30)
-# LA_PLATFORM_CONFIG(0x31)
-# LA_SEL_INFO(0x32)
-# LB_SENSB_INFO(0x38)
-# LF_PROTOCOL(0x50)
-# NFCC_CONFIG_CONTROL(0x85)
-
-NXP_CORE_CONF={ 20, 02, 37, 11,
-        28, 01, 00,
-        21, 01, 00,
-        30, 01, 08,
-        31, 01, 03,
-        32, 01, 60,
-        38, 01, 01,
-        33, 04, 01, 02, 03, 04,
-        54, 01, 06,
-        50, 01, 02,
-        5B, 01, 00,
-        3E, 01, 00,
-        80, 01, 01,
-        81, 01, 01,
-        82, 01, 0E,
-        18, 01, 01,
-        68, 01, 01,
-        85, 01, 01
-        }
-###############################################################################
-# Enable(0x01) or disable(0x00) non-standard tag reading
-# Disable Non-standard card read         0x00
-# Enable Non-standard card read          0x01
-NXP_SUPPORT_NON_STD_CARD=0x00
-#################################################################################
-# Enable(0x01) or disable(0x00 ) for getting HW Info log over SMB wired
-# Disable getting HW info log            0x00
-# Enable getting HW info log             0x01
-NXP_GET_HW_INFO_LOG=0x00
-#################################################################################
-# Enable(0x01) or disable(0x00) iso dep sak merge
-# Disable SAK merging         0x00
-# Enable SAK merging          0x01
-NXP_ISO_DEP_MERGE_SAK=0x01
-#################################################################################
-# Valid time difference range within for non-standard tag detection from first
-# Activation fail to next discovery
-# Note :- 1. This will take effect only when NXP_SUPPORT_NON_STD_CARD is enabled
-#         2. The number will be multiplied by 100ms by MW.
-# Default:
-# Set to 00 if not supported
-#  byte[0] MIFARE_CLASSIC 100ms
-#  byte[1] ISO_DEP        300ms
-NXP_NON_STD_CARD_TIMEDIFF={01, 03}
-#################################################################################
-# Enable or Disable UICC ETSI support
-# Disable UICC ETSI support         0
-# Enable UICC ETSI support          1
-NXP_UICC_ETSI_SUPPORT=0
-#################################################################################
-# Enable Stop/Start of RF discovery for NFCEE recovery
-# Disable RF Restart for NFCEE recovery   0
-# Enable RF Restart for NFCEE recovery    1
-NXP_RESTART_RF_FOR_NFCEE_RECOVERY=0
-#################################################################################
-#Tag Presence check timeout in millisecond.
-NXP_PRESENCE_CHECK_TIMEOUT = 375
-#################################################################################
-# MAX 20 RF configuration blocks are supported by MW.
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_1={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_2={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_3={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_4={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_5={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_6={
-#}
-
-###############################################################################

proprietary/vendor/etc/libnfc-mtp-SN100.conf

@@ -1,626 +0,0 @@
-#################### This file is used by NXP NFC NCI HAL #####################
-###############################################################################
-# Application options
-# Logging Levels
-# NXPLOG_DEFAULT_LOGLEVEL    0x01
-# ANDROID_LOG_DEBUG          0x03
-# ANDROID_LOG_WARN           0x02
-# ANDROID_LOG_ERROR          0x01
-# ANDROID_LOG_SILENT         0x00
-NXPLOG_EXTNS_LOGLEVEL=0x03
-NXPLOG_NCIHAL_LOGLEVEL=0x03
-NXPLOG_NCIX_LOGLEVEL=0x03
-NXPLOG_NCIR_LOGLEVEL=0x03
-NXPLOG_FWDNLD_LOGLEVEL=0x03
-NXPLOG_TML_LOGLEVEL=0x03
-NFC_DEBUG_ENABLED=1
-
-###############################################################################
-# Nfc Device Node name
-NXP_NFC_DEV_NODE="/dev/nq-nci"
-
-#################################################################################
-#VEN Toggle Config
-#Disable = 0x00
-#Enable  = 0x01
-ENABLE_VEN_TOGGLE=0x00
-
-###############################################################################
-# Extension for Mifare reader enable
-MIFARE_READER_ENABLE=0x01
-
-###############################################################################
-# Mifare Reader implementation
-# 0: General implementation
-# 1: Legacy implementation
-LEGACY_MIFARE_READER=0
-
-###############################################################################
-# System clock source selection configuration
-#define CLK_SRC_XTAL       1
-#define CLK_SRC_PLL        2
-NXP_SYS_CLK_SRC_SEL=0x02
-
-###############################################################################
-# System clock frequency selection configuration
-#define CLK_FREQ_13MHZ         1
-#define CLK_FREQ_19_2MHZ       2
-#define CLK_FREQ_24MHZ         3
-#define CLK_FREQ_26MHZ         4
-#define CLK_FREQ_38_4MHZ       5
-#define CLK_FREQ_52MHZ         6
-NXP_SYS_CLK_FREQ_SEL=0x02
-
-###############################################################################
-# The timeout value to be used for clock request acknowledgment
-# min value = 0x01 to max = 0x06
-#NXP_SYS_CLOCK_TO_CFG=0x06
-
-###############################################################################
-# The delay to try to start PLL/XTAL when using sys clock 256/fc units = ~18.8 us
-# min value = 0x01 to max = 0x1F
-#NXP_CLOCK_REQ_DELAY=0x16
-
-###############################################################################
-# NXP proprietary settings
-NXP_ACT_PROP_EXTN={2F, 02, 00}
-
-###############################################################################
-# NXP TVDD configurations settings
-# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported,
-# out of them only one can be configured at a time.
-NXP_EXT_TVDD_CFG=0x02
-
-###############################################################################
-#config1:SLALM, 3.3V for both RM and CM
-#NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C}
-
-###############################################################################
-#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM,
-#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms
-#NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C}
-NXP_EXT_TVDD_CFG_2={20, 02, 30, 01, A0, 0E, 2C, F0, 00, 3E, 11, E4, E4, E4, 00, 00, 00, 00, 00, A7, 8E, FF, FF, 0F, 0F, 0F, 0F, 0A, 00, 00, 00, 00, 02, 00, 00, 01, 00, 10, 00, 04, 00, 00, 00, 17, 40, 20, 07, 13, 07, 05, 13}
-
-###############################################################################
-# MAX 20 RF configuration blocks are supported by MW.
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_1={
-#}
-
-###############################################################################
-# By default, the LPCD shall be enabled.
-# Please check the platform specific configuration and enable it.
-# NXP_RF_CONF_BLK_1={
-#                    20, 02, 2E, 01,
-#                    A0, 68, 2A, 06, 40, 60, 03, 19, 00, 00, 00, 00,
-#                    83, 04,
-#                    00,
-#                    C0, 00, C0, 00,
-#                    00, 01, 00, 01,
-#                    A0, 00, A0, 00,
-#                    03, FA, 00, 00, 00, 4C, 00, 14, 00, 7D, 00,
-#                    05,
-#                    7F, 00,
-#                    00, 01,00, 03
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_2={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_3={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_4={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_5={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_6={
-#}
-
-###############################################################################
-# Set configuration optimization decision setting
-# Enable    = 0x01
-# Disable   = 0x00
-NXP_SET_CONFIG_ALWAYS=0x01
-
-###############################################################################
-# Core configuration rf field filter settings to enable set to 01 to disable set to 00 last bit
-#NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00}
-
-###############################################################################
-# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set
-# to 0x00
-#NXP_I2C_FRAGMENTATION_ENABLED=0x00
-
-###############################################################################
-# Core configuration extensions
-# It includes
-# Wired mode settings A0ED, A0EE
-# Tag Detector A040, A041, A043
-# Low Power mode A007
-# Clock settings A002, A003
-# PbF settings A008
-# Clock timeout settings A004
-# eSE (SVDD) PWR REQ settings A0F2
-# Window size A0D8
-# DWP Speed   A0D5
-# How eSE connected to PN553 A012
-# UICC2 bit rate A0D1
-# SWP1A interface A0D4
-# DWP intf behavior config, SVDD Load activated by default if set to 0x31 A037
-# Low power tag detection LPTD for power reduction A068
-NXP_CORE_CONF_EXTN={20, 02, 3E, 05,
-    A0, EC, 01, 01,
-    A0, ED, 01, 01,
-    A0, 0A, 01, 0A,
-    A0, 68, 2A, 06, 40, 60, 03, 19, 00, 00, 00, 00, 82, 04, 00, 00, 02, 00, 0F, 00, 02, 00, 0F, A0, 00, A0, 00, 03, FA, 00, 00, 00, 4C, 00, 14, 00, 7D, 00, 05, 7F, 00, 00, 01, 00, 03,
-    A0, 0A, 01, 20
-}
-#       A0, F2, 01, 01,
-#       A0, 40, 01, 01,
-#       A0, 41, 01, 02,
-#       A0, 43, 01, 04,
-#       A0, 02, 01, 01,
-#       A0, 03, 01, 11,
-#       A0, 07, 01, 03,
-#       A0, 08, 01, 01
-#       }
-
-###############################################################################
-# Core configuration settings
-NXP_CORE_CONF={ 20, 02, 37, 11,
-        28, 01, 00,
-        21, 01, 00,
-        30, 01, 08,
-        31, 01, 03,
-        32, 01, 60,
-        38, 01, 01,
-        33, 04, 01, 02, 03, 04,
-        54, 01, 06,
-        50, 01, 02,
-        5B, 01, 00,
-        3E, 01, 00,
-        80, 01, 01,
-        81, 01, 01,
-        82, 01, 0E,
-        18, 01, 01,
-        68, 01, 01,
-        85, 01, 01
-        }
-
-###############################################################################
-#set autonomous mode
-# disable autonomous 0x00
-# enable autonomous  0x01
-NXP_AUTONOMOUS_ENABLE=0x00
-###############################################################################
-#set Guard Timer
-# Gurad Timer range to 0x0F-0xFF(i.e.15-255 seconds)
-NXP_GUARD_TIMER_VALUE=0x0F
-###############################################################################
-#Enable SWP full power mode when phone is power off
-#NXP_SWP_FULL_PWR_ON=0x00
-
-################################################################################
-#This is used to configure UICC2 at boot time.
-# UICC2              0x03
-NXP_DEFAULT_UICC2_SELECT=0x03
-###############################################################################
-# CE when Screen state is locked
-# This setting is for DEFAULT_AID_ROUTE,
-# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE
-# Disable           0x00
-# Enable            0x01
-NXP_CE_ROUTE_STRICT_DISABLE=0x01
-
-###############################################################################
-#SCR Read Tag Operation Timeout in secs
-NXP_SWP_RD_TAG_OP_TIMEOUT=20
-
-###############################################################################
-#Set the default AID route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_AID_ROUTE=0x01
-
-###############################################################################
-#Set the ISODEP (Mifare Desfire) route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_ISODEP_ROUTE=0x01
-
-###############################################################################
-#Set the Mifare CLT route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_MIFARE_CLT_ROUTE=0x01
-
-###############################################################################
-#Set the Felica CLT route Location :
-#This settings will be used when application does not set this parameter
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_FELICA_CLT_ROUTE=0x01
-
-###############################################################################
-#Set the default AID Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_AID_PWR_STATE=0x39
-
-###############################################################################
-#Set the Mifare Desfire Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_DESFIRE_PWR_STATE=0x3B
-
-###############################################################################
-#Set the Mifare CLT Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_MIFARE_CLT_PWR_STATE=0x3B
-
-###############################################################################
-#Set the Felica CLT Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_FELICA_CLT_PWR_STATE=0x3B
-###############################################################################
-#Set the T4TNfcee AID Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_T4TNFCEE_AID_POWER_STATE=0x3B
-
-###############################################################################
-#Set the default Felica T3T System Code OffHost route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_SYS_CODE_ROUTE=0x00
-###############################################################################
-# AID Matching platform options
-# AID_MATCHING_L 0x01
-# AID_MATCHING_K 0x02
-#AID_MATCHING_PLATFORM=0x01
-###############################################################################
-# P61 interface options
-# SPI 0x02
-NXP_P61_LS_DEFAULT_INTERFACE=0x00
-
-###############################################################################
-#CHINA_TIANJIN_RF_SETTING
-#Enable  0x01
-#Disable  0x00
-#NXP_CHINA_TIANJIN_RF_ENABLED=0x01
-###############################################################################
-#SWP_SWITCH_TIMEOUT_SETTING
-# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60].
-# Timeout in milliseconds, for example
-# No Timeout  0x00
-# 10 millisecond timeout 0x0A
-#NXP_SWP_SWITCH_TIMEOUT=0x0A
-###############################################################################
-# Flashing Options Configurations
-# FLASH_UPPER_VERSION 0x01
-# FLASH_DIFFERENT_VERSION 0x02
-# FLASH_ALWAYS 0x03
-NXP_FLASH_CONFIG=0x02
-
-###############################################################################
-# P61 interface options for JCOP Download
-# SPI 0x02
-NXP_P61_JCOP_DEFAULT_INTERFACE=0x00
-
-###############################################################################
-# Option to perform LS update every boot
-# Enable 0x01
-# Disable    0x00
-NXP_LS_FORCE_UPDATE_REQUIRED=0x00
-
-###############################################################################
-# Option to perform JCOP update every boot
-# Enable 0x01
-# Disable 0x00
-NXP_JCOP_FORCE_UPDATE_REQUIRED=0x00
-
-###############################################################################
-# Bail out mode
-#  If set to 1, NFCC is using bail out mode for either Type A or Type B poll.
-#  Set this parameter value to 1 if Android Beam is enabled, else set to 0.
-NFA_POLL_BAIL_OUT_MODE=0x00
-
-###############################################################################
-# White list of Hosts
-# This values will be the Hosts(NFCEEs) in the HCI Network.
-DEVICE_HOST_WHITE_LIST={C0, 80}
-
-###############################################################################
-# Choose the presence-check algorithm for type-4 tag.  If not defined, the default value is 1.
-# 0  NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
-# 1  NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
-# 2 NFA_RW_PRES_CHK_ISO_DEP_NAK; Type - 4 tag protocol iso-dep nak presence check
-#    command is sent waiting for rsp and ntf.
-PRESENCE_CHECK_ALGORITHM=2
-###############################################################################
-# Options to Fallback to alternative route
-# Disable           0x00
-# DH                0x01
-# ESE               0x02
-NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
-###############################################################################
-# Vendor Specific Proprietary Protocol & Discovery Configuration
-# Set to 0xFF if unsupported
-#  byte[0] NCI_PROTOCOL_18092_ACTIVE
-#  byte[1] NCI_PROTOCOL_B_PRIME
-#  byte[2] NCI_PROTOCOL_DUAL
-#  byte[3] NCI_PROTOCOL_15693
-#  byte[4] NCI_PROTOCOL_KOVIO
-#  byte[5] NCI_PROTOCOL_MIFARE
-#  byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
-#  byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
-#  byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
-NFA_PROPRIETARY_CFG={05, FF, FF, 06, 81, 80, FF, FF, FF}
-
-###############################################################################
-#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE
-#Enable/Disable block number checks for china transit use case
-#Enable  0x01
-#Disable  0x00
-#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01
-
-################################################################################
-#This flags will enable different modes of Lx Debug based on bits of the Byte0
-#Byte 0:
-# |_________Bit Mask_______|   Debug Mode
-#  b7|b6|b5|b4|b3|b2|b1|b0|
-#    |  |x |  |  |  |  |  |    Modulation Detected Notification
-#    |  |  |X |  |  |  |  |    Enable L1 Events (ISO14443-4, ISO18092)
-#    |  |  |  |X |  |  |  |    Enable L2 Reader Events(ROW specific)
-#    |  |  |  |  |X |  |  |    Enable Felica SystemCode
-#    |  |  |  |  |  |X |  |    Enable Felica RF (all Felica CM events)
-#    |  |  |  |  |  |  |X |    Enable L2 Events CE (ISO14443-3, RF Field ON/OFF)
-#Byte 1: RFU, shall always be 0x00
-#                              Byte1    Byte0
-#                                  \__ __/
-# e.g. NXP_CORE_PROP_SYSTEM_DEBUG=0x0031 ==> Modulation detected, L1, L2 CE
-NXP_CORE_PROP_SYSTEM_DEBUG=0x0000
-
-###############################################################################
-#Enable NXP NCI runtime parser library
-#Enable 0x01
-#Disable 0x00
-NXP_NCI_PARSER_LIBRARY=0x00
-
-###############################################################################
-# Timeout value in milliseconds for JCOP OS download to complete
-OS_DOWNLOAD_TIMEOUT_VALUE=60000
-
-###############################################################################
-# Forcing HOST to listen for a selected protocol
-# 0x00 : Disable Host Listen
-# 0x01 : Enable Host to Listen (A)  for ISO-DEP tech A
-# 0x02 : Enable Host to Listen (B)  for ISO-DEP tech B
-# 0x04 : Enable Host to Listen (F)  for T3T Tag Type Protocol tech F
-# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F
-HOST_LISTEN_TECH_MASK=0x07
-
-###############################################################################
-# Enable forward functionality
-# Disable           0x00
-# Enable            0x01 //Any positive value as per below bit configuration
-# HOST power states when type A/B only UICC present
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-FORWARD_FUNCTIONALITY_ENABLE=0x01
-
-###############################################################################
-# Configure the NFC Extras to open and use a static pipe.  If the value is
-# not set or set to 0, then the default is use a dynamic pipe based on a
-# destination gate (see NFA_HCI_DEFAULT_DEST_GATE).  Note there is a value
-# for each EE (ESE/SIM1/SIM2)
-OFF_HOST_ESE_PIPE_ID=0x16
-OFF_HOST_SIM_PIPE_ID=0x0A
-OFF_HOST_SIM2_PIPE_ID=0x23
-
-###############################################################################
-#Set the Felica T3T System Code Power state :
-#This settings will be used when application does not set this parameter
-#Update Power state as per NCI2.0
-DEFAULT_SYS_CODE_PWR_STATE=0x00
-###############################################################################
-#Default Secure Element route id
-DEFAULT_OFFHOST_ROUTE=0x01
-
-###############################################################################
-#Maximum SMB transceive wait for response
-NXP_SMB_TRANSCEIVE_TIMEOUT=2000
-###############################################################################
-# Firmware file type
-#.so file   0x01
-#.bin file  0x02
-NXP_FW_TYPE=0x01
-############################################################################
-# Extended APDU length for ISO_DEP
-ISO_DEP_MAX_TRANSCEIVE=0xFEFF
-#########################################################################
-# Support for Amendment I SEMS specification
-# Support SEMS Amendment I 0x01
-# Support NXP LS client    0x00
-NXP_GP_AMD_I_SEMS_SUPPORTED=0x01
-
-###############################################################################
-#All eSE terminals shall be match with the  /vendor/etc/vintf/manifest.xml file
-#under android.hardware.secure_element
-# The terminal name shall start from 1
-# Assign terminal number to each interface based on system config
-NXP_SPI_SE_TERMINAL_NUM="eSE1"
-###############################################################################
-# Assign terminal number to each interface based on system config
-#NXP_VISO_SE_TERMINAL_NUM="eSE3"
-###############################################################################
-# Assign terminal number to each interface based on system config
-NXP_NFC_SE_TERMINAL_NUM="eSE2"
-###############################################################################
-#For static or dynamic dual UICC feature support
-#Enable static dual uicc feature by setting value 0x00
-#Enable dynamic dual uicc feature by setting value 0x01
-NXP_DUAL_UICC_ENABLE=0x01
-###############################################################################
-# Time to wait by DH when NFCC will report eSE Cold Temp Error.
-# The value is as per the UM and in seconds
-NXP_SE_COLD_TEMP_ERROR_DELAY=0x05
-###############################################################################
-#OffHost ESE route location for MultiSE
-#ESE = 01
-OFFHOST_ROUTE_ESE={01}
-###############################################################################
-#OffHost UICC route location for MultiSE
-#UICC1 = 02
-#UICC2 = 03
-OFFHOST_ROUTE_UICC={02:03}
-
-###############################################################################
-#T4T NFCEE ENABLE
-#bit pos 0 = T4T NFCEE Enable
-#bit pos 6 = T4T NFCEE Contactless write enable
-NXP_T4T_NFCEE_ENABLE=0x01
-
-###############################################################################
-#CORE_SET_CONF_CMD to reset Prop Emvco Flag
-NXP_PROP_RESET_EMVCO_CMD={20, 02, 05, 01, A0, 44, 01, 00}
-
-###############################################################################
-#Guard time in ms for the mPOS/SCR module to process the reader start/stop req
-NXP_RDR_REQ_GUARD_TIME=0
-
-###############################################################################
-#MW workaround to enable LPCD when EMVCO polling mode starts and disable
-#while switching back to NFC Forum mode
-# 0 --> Disable MW workaround
-# 1 --> Enable MW workaround
-# 2 --> Use this option only for FW versions below 1.10.52
-NXP_RDR_DISABLE_ENABLE_LPCD=0
-
-###############################################################################
-# Firmware patch format, Only 1 and 5 should be set
-#   0 -> NFC Default
-#   1 -> EMVCO Default
-#   3 -> EMVCO Polling, DISC_IDLE = POWER_OFF, DISC DEACTIVATE =  Removal process
-#   5 -> EMVCO Cert Polling, DISC_IDLE = Removal process  , DISC DEACTIVATE =   POWER_OFF
-#   7 -> EMVCO Polling, DISC_IDLE = POWER_OFF, DISC DEACTIVATE =  POWER_OFF
-NFA_CONFIG_FORMAT=1
-
-#################################################################################
-# Enable disconnect tag in screen off
-# Disable           0x00
-# Enable            0x01
-NXP_DISCONNECT_TAG_IN_SCRN_OFF=0x01
-#################################################################################
-
-###############################################################################
-# Enable(0x01) or disable(0x00) non-standard tag reading
-# Disable Non-standard card read         0x00
-# Enable Non-standard card read          0x01
-NXP_SUPPORT_NON_STD_CARD=0x00
-#################################################################################
-# Enable(0x01) or disable(0x00 ) for getting HW Info log over SMB wired
-# Disable getting HW info log            0x00
-# Enable getting HW info log             0x01
-NXP_GET_HW_INFO_LOG=0x00
-#################################################################################
-# Enable(0x01) or disable(0x00) iso dep sak merge
-# Disable SAK merging         0x00
-# Enable SAK merging          0x01
-NXP_ISO_DEP_MERGE_SAK=0x01
-#################################################################################
-# Valid time difference range within for non-standard tag detection from first
-# Activation fail to next discovery
-# Note :- 1. This will take effect only when NXP_SUPPORT_NON_STD_CARD is enabled
-#         2. The number will be multiplied by 100ms by MW.
-# Default:
-# Set to 00 if not supported
-#  byte[0] MIFARE_CLASSIC 100ms
-#  byte[1] ISO_DEP        300ms
-NXP_NON_STD_CARD_TIMEDIFF={01, 03}
-#################################################################################
-# Enable or Disable UICC ETSI support
-# Disable UICC ETSI support         0
-# Enable UICC ETSI support          1
-NXP_UICC_ETSI_SUPPORT=0
-#################################################################################
-# Minimal FW Version used for recovery
-NXP_MINIMAL_FW_VERSION=0x110DE
-#################################################################################
-# Enable Stop/Start of RF discovery for NFCEE recovery
-# Disable RF Restart for NFCEE recovery   0
-# Enable RF Restart for NFCEE recovery    1
-NXP_RESTART_RF_FOR_NFCEE_RECOVERY=0
-#################################################################################
-#Tag Presence check timeout in millisecond.
-NXP_PRESENCE_CHECK_TIMEOUT = 375
-#################################################################################
-# Enable or Disable the minimal FW recovery support.
-# This logic will get enabled on early NFC hal boot.
-# Disable NFCC RECOVERY support          0x00
-# Enable  NFCC RECOVERY support          0x01
-NXP_NFCC_RECOVERY_SUPPORT=0x01
-#################################################################################

proprietary/vendor/etc/libnfc-mtp-SN100_38_4MHZ.conf

@@ -1,627 +0,0 @@
-#################### This file is used by NXP NFC NCI HAL #####################
-###############################################################################
-# Application options
-# Logging Levels
-# NXPLOG_DEFAULT_LOGLEVEL    0x01
-# ANDROID_LOG_DEBUG          0x03
-# ANDROID_LOG_WARN           0x02
-# ANDROID_LOG_ERROR          0x01
-# ANDROID_LOG_SILENT         0x00
-NXPLOG_EXTNS_LOGLEVEL=0x03
-NXPLOG_NCIHAL_LOGLEVEL=0x03
-NXPLOG_NCIX_LOGLEVEL=0x03
-NXPLOG_NCIR_LOGLEVEL=0x03
-NXPLOG_FWDNLD_LOGLEVEL=0x03
-NXPLOG_TML_LOGLEVEL=0x03
-NFC_DEBUG_ENABLED=1
-
-###############################################################################
-# Nfc Device Node name
-NXP_NFC_DEV_NODE="/dev/nq-nci"
-
-#################################################################################
-#VEN Toggle Config
-#Disable = 0x00
-#Enable  = 0x01
-ENABLE_VEN_TOGGLE=0x00
-
-###############################################################################
-# Extension for Mifare reader enable
-MIFARE_READER_ENABLE=0x01
-
-###############################################################################
-# Mifare Reader implementation
-# 0: General implementation
-# 1: Legacy implementation
-LEGACY_MIFARE_READER=0
-
-###############################################################################
-# System clock source selection configuration
-#define CLK_SRC_XTAL       1
-#define CLK_SRC_PLL        2
-NXP_SYS_CLK_SRC_SEL=0x02
-
-###############################################################################
-# System clock frequency selection configuration
-#define CLK_FREQ_13MHZ         1
-#define CLK_FREQ_19_2MHZ       2
-#define CLK_FREQ_24MHZ         3
-#define CLK_FREQ_26MHZ         4
-#define CLK_FREQ_32MHZ         5
-#define CLK_FREQ_38_4MHZ       6
-#define CLK_FREQ_52MHZ         7
-NXP_SYS_CLK_FREQ_SEL=0x06
-
-###############################################################################
-# The timeout value to be used for clock request acknowledgment
-# min value = 0x01 to max = 0x06
-#NXP_SYS_CLOCK_TO_CFG=0x06
-
-###############################################################################
-# The delay to try to start PLL/XTAL when using sys clock 256/fc units = ~18.8 us
-# min value = 0x01 to max = 0x1F
-#NXP_CLOCK_REQ_DELAY=0x16
-
-###############################################################################
-# NXP proprietary settings
-NXP_ACT_PROP_EXTN={2F, 02, 00}
-
-###############################################################################
-# NXP TVDD configurations settings
-# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported,
-# out of them only one can be configured at a time.
-NXP_EXT_TVDD_CFG=0x02
-
-###############################################################################
-#config1:SLALM, 3.3V for both RM and CM
-#NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C}
-
-###############################################################################
-#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM,
-#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms
-#NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C}
-NXP_EXT_TVDD_CFG_2={20, 02, 30, 01, A0, 0E, 2C, F0, 00, 3E, 11, E4, E4, E4, 00, 00, 00, 00, 00, A7, 8E, FF, FF, 0F, 0F, 0F, 0F, 0A, 00, 00, 00, 00, 02, 00, 00, 01, 00, 10, 00, 04, 00, 00, 00, 17, 40, 20, 07, 13, 07, 05, 13}
-
-###############################################################################
-# MAX 20 RF configuration blocks are supported by MW.
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_1={
-#}
-
-###############################################################################
-# By default, the LPCD shall be enabled.
-# Please check the platform specific configuration and enable it.
-# NXP_RF_CONF_BLK_1={
-#                    20, 02, 2E, 01,
-#                    A0, 68, 2A, 06, 40, 60, 03, 19, 00, 00, 00, 00,
-#                    83, 04,
-#                    00,
-#                    C0, 00, C0, 00,
-#                    00, 01, 00, 01,
-#                    A0, 00, A0, 00,
-#                    03, FA, 00, 00, 00, 4C, 00, 14, 00, 7D, 00,
-#                    05,
-#                    7F, 00,
-#                    00, 01,00, 03
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_2={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_3={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_4={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_5={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_6={
-#}
-
-###############################################################################
-# Set configuration optimization decision setting
-# Enable    = 0x01
-# Disable   = 0x00
-NXP_SET_CONFIG_ALWAYS=0x01
-
-###############################################################################
-# Core configuration rf field filter settings to enable set to 01 to disable set to 00 last bit
-#NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00}
-
-###############################################################################
-# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set
-# to 0x00
-#NXP_I2C_FRAGMENTATION_ENABLED=0x00
-
-###############################################################################
-# Core configuration extensions
-# It includes
-# Wired mode settings A0ED, A0EE
-# Tag Detector A040, A041, A043
-# Low Power mode A007
-# Clock settings A002, A003
-# PbF settings A008
-# Clock timeout settings A004
-# eSE (SVDD) PWR REQ settings A0F2
-# Window size A0D8
-# DWP Speed   A0D5
-# How eSE connected to PN553 A012
-# UICC2 bit rate A0D1
-# SWP1A interface A0D4
-# DWP intf behavior config, SVDD Load activated by default if set to 0x31 A037
-# Low power tag detection LPTD for power reduction A068
-NXP_CORE_CONF_EXTN={20, 02, 3E, 05,
-    A0, EC, 01, 01,
-    A0, ED, 01, 01,
-    A0, 0A, 01, 0A,
-    A0, 68, 2A, 06, 40, 60, 03, 19, 00, 00, 00, 00, 82, 04, 00, 00, 02, 00, 0F, 00, 02, 00, 0F, A0, 00, A0, 00, 03, FA, 00, 00, 00, 4C, 00, 14, 00, 7D, 00, 05, 7F, 00, 00, 01, 00, 03,
-    A0, 0A, 01, 20
-}
-#       A0, F2, 01, 01,
-#       A0, 40, 01, 01,
-#       A0, 41, 01, 02,
-#       A0, 43, 01, 04,
-#       A0, 02, 01, 01,
-#       A0, 03, 01, 11,
-#       A0, 07, 01, 03,
-#       A0, 08, 01, 01
-#       }
-
-###############################################################################
-# Core configuration settings
-NXP_CORE_CONF={ 20, 02, 37, 11,
-        28, 01, 00,
-        21, 01, 00,
-        30, 01, 08,
-        31, 01, 03,
-        32, 01, 60,
-        38, 01, 01,
-        33, 04, 01, 02, 03, 04,
-        54, 01, 06,
-        50, 01, 02,
-        5B, 01, 00,
-        3E, 01, 00,
-        80, 01, 01,
-        81, 01, 01,
-        82, 01, 0E,
-        18, 01, 01,
-        68, 01, 01,
-        85, 01, 01
-        }
-
-###############################################################################
-#set autonomous mode
-# disable autonomous 0x00
-# enable autonomous  0x01
-NXP_AUTONOMOUS_ENABLE=0x00
-###############################################################################
-#set Guard Timer
-# Gurad Timer range to 0x0F-0xFF(i.e.15-255 seconds)
-NXP_GUARD_TIMER_VALUE=0x0F
-###############################################################################
-#Enable SWP full power mode when phone is power off
-#NXP_SWP_FULL_PWR_ON=0x00
-
-################################################################################
-#This is used to configure UICC2 at boot time.
-# UICC2              0x03
-NXP_DEFAULT_UICC2_SELECT=0x03
-###############################################################################
-# CE when Screen state is locked
-# This setting is for DEFAULT_AID_ROUTE,
-# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE
-# Disable           0x00
-# Enable            0x01
-NXP_CE_ROUTE_STRICT_DISABLE=0x01
-
-###############################################################################
-#SCR Read Tag Operation Timeout in secs
-NXP_SWP_RD_TAG_OP_TIMEOUT=20
-
-###############################################################################
-#Set the default AID route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_AID_ROUTE=0x01
-
-###############################################################################
-#Set the ISODEP (Mifare Desfire) route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_ISODEP_ROUTE=0x01
-
-###############################################################################
-#Set the Mifare CLT route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_MIFARE_CLT_ROUTE=0x01
-
-###############################################################################
-#Set the Felica CLT route Location :
-#This settings will be used when application does not set this parameter
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_FELICA_CLT_ROUTE=0x01
-
-###############################################################################
-#Set the default AID Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_AID_PWR_STATE=0x39
-
-###############################################################################
-#Set the Mifare Desfire Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_DESFIRE_PWR_STATE=0x3B
-
-###############################################################################
-#Set the Mifare CLT Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_MIFARE_CLT_PWR_STATE=0x3B
-
-###############################################################################
-#Set the Felica CLT Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_FELICA_CLT_PWR_STATE=0x3B
-###############################################################################
-#Set the T4TNfcee AID Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_T4TNFCEE_AID_POWER_STATE=0x3B
-
-###############################################################################
-#Set the default Felica T3T System Code OffHost route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_SYS_CODE_ROUTE=0x00
-###############################################################################
-# AID Matching platform options
-# AID_MATCHING_L 0x01
-# AID_MATCHING_K 0x02
-#AID_MATCHING_PLATFORM=0x01
-###############################################################################
-# P61 interface options
-# SPI 0x02
-NXP_P61_LS_DEFAULT_INTERFACE=0x00
-
-###############################################################################
-#CHINA_TIANJIN_RF_SETTING
-#Enable  0x01
-#Disable  0x00
-#NXP_CHINA_TIANJIN_RF_ENABLED=0x01
-###############################################################################
-#SWP_SWITCH_TIMEOUT_SETTING
-# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60].
-# Timeout in milliseconds, for example
-# No Timeout  0x00
-# 10 millisecond timeout 0x0A
-#NXP_SWP_SWITCH_TIMEOUT=0x0A
-###############################################################################
-# Flashing Options Configurations
-# FLASH_UPPER_VERSION 0x01
-# FLASH_DIFFERENT_VERSION 0x02
-# FLASH_ALWAYS 0x03
-NXP_FLASH_CONFIG=0x02
-
-###############################################################################
-# P61 interface options for JCOP Download
-# SPI 0x02
-NXP_P61_JCOP_DEFAULT_INTERFACE=0x00
-
-###############################################################################
-# Option to perform LS update every boot
-# Enable 0x01
-# Disable    0x00
-NXP_LS_FORCE_UPDATE_REQUIRED=0x00
-
-###############################################################################
-# Option to perform JCOP update every boot
-# Enable 0x01
-# Disable 0x00
-NXP_JCOP_FORCE_UPDATE_REQUIRED=0x00
-
-###############################################################################
-# Bail out mode
-#  If set to 1, NFCC is using bail out mode for either Type A or Type B poll.
-#  Set this parameter value to 1 if Android Beam is enabled, else set to 0.
-NFA_POLL_BAIL_OUT_MODE=0x00
-
-###############################################################################
-# White list of Hosts
-# This values will be the Hosts(NFCEEs) in the HCI Network.
-DEVICE_HOST_WHITE_LIST={C0, 80}
-
-###############################################################################
-# Choose the presence-check algorithm for type-4 tag.  If not defined, the default value is 1.
-# 0  NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
-# 1  NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
-# 2 NFA_RW_PRES_CHK_ISO_DEP_NAK; Type - 4 tag protocol iso-dep nak presence check
-#    command is sent waiting for rsp and ntf.
-PRESENCE_CHECK_ALGORITHM=2
-###############################################################################
-# Options to Fallback to alternative route
-# Disable           0x00
-# DH                0x01
-# ESE               0x02
-NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
-###############################################################################
-# Vendor Specific Proprietary Protocol & Discovery Configuration
-# Set to 0xFF if unsupported
-#  byte[0] NCI_PROTOCOL_18092_ACTIVE
-#  byte[1] NCI_PROTOCOL_B_PRIME
-#  byte[2] NCI_PROTOCOL_DUAL
-#  byte[3] NCI_PROTOCOL_15693
-#  byte[4] NCI_PROTOCOL_KOVIO
-#  byte[5] NCI_PROTOCOL_MIFARE
-#  byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
-#  byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
-#  byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
-NFA_PROPRIETARY_CFG={05, FF, FF, 06, 81, 80, FF, FF, FF}
-
-###############################################################################
-#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE
-#Enable/Disable block number checks for china transit use case
-#Enable  0x01
-#Disable  0x00
-#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01
-
-################################################################################
-#This flags will enable different modes of Lx Debug based on bits of the Byte0
-#Byte 0:
-# |_________Bit Mask_______|   Debug Mode
-#  b7|b6|b5|b4|b3|b2|b1|b0|
-#    |  |x |  |  |  |  |  |    Modulation Detected Notification
-#    |  |  |X |  |  |  |  |    Enable L1 Events (ISO14443-4, ISO18092)
-#    |  |  |  |X |  |  |  |    Enable L2 Reader Events(ROW specific)
-#    |  |  |  |  |X |  |  |    Enable Felica SystemCode
-#    |  |  |  |  |  |X |  |    Enable Felica RF (all Felica CM events)
-#    |  |  |  |  |  |  |X |    Enable L2 Events CE (ISO14443-3, RF Field ON/OFF)
-#Byte 1: RFU, shall always be 0x00
-#                              Byte1    Byte0
-#                                  \__ __/
-# e.g. NXP_CORE_PROP_SYSTEM_DEBUG=0x0031 ==> Modulation detected, L1, L2 CE
-NXP_CORE_PROP_SYSTEM_DEBUG=0x0000
-
-###############################################################################
-#Enable NXP NCI runtime parser library
-#Enable 0x01
-#Disable 0x00
-NXP_NCI_PARSER_LIBRARY=0x00
-
-###############################################################################
-# Timeout value in milliseconds for JCOP OS download to complete
-OS_DOWNLOAD_TIMEOUT_VALUE=60000
-
-###############################################################################
-# Forcing HOST to listen for a selected protocol
-# 0x00 : Disable Host Listen
-# 0x01 : Enable Host to Listen (A)  for ISO-DEP tech A
-# 0x02 : Enable Host to Listen (B)  for ISO-DEP tech B
-# 0x04 : Enable Host to Listen (F)  for T3T Tag Type Protocol tech F
-# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F
-HOST_LISTEN_TECH_MASK=0x07
-
-###############################################################################
-# Enable forward functionality
-# Disable           0x00
-# Enable            0x01 //Any positive value as per below bit configuration
-# HOST power states when type A/B only UICC present
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-FORWARD_FUNCTIONALITY_ENABLE=0x01
-
-###############################################################################
-# Configure the NFC Extras to open and use a static pipe.  If the value is
-# not set or set to 0, then the default is use a dynamic pipe based on a
-# destination gate (see NFA_HCI_DEFAULT_DEST_GATE).  Note there is a value
-# for each EE (ESE/SIM1/SIM2)
-OFF_HOST_ESE_PIPE_ID=0x16
-OFF_HOST_SIM_PIPE_ID=0x0A
-OFF_HOST_SIM2_PIPE_ID=0x23
-
-###############################################################################
-#Set the Felica T3T System Code Power state :
-#This settings will be used when application does not set this parameter
-#Update Power state as per NCI2.0
-DEFAULT_SYS_CODE_PWR_STATE=0x00
-###############################################################################
-#Default Secure Element route id
-DEFAULT_OFFHOST_ROUTE=0x01
-
-###############################################################################
-#Maximum SMB transceive wait for response
-NXP_SMB_TRANSCEIVE_TIMEOUT=2000
-###############################################################################
-# Firmware file type
-#.so file   0x01
-#.bin file  0x02
-NXP_FW_TYPE=0x01
-############################################################################
-# Extended APDU length for ISO_DEP
-ISO_DEP_MAX_TRANSCEIVE=0xFEFF
-#########################################################################
-# Support for Amendment I SEMS specification
-# Support SEMS Amendment I 0x01
-# Support NXP LS client    0x00
-NXP_GP_AMD_I_SEMS_SUPPORTED=0x01
-
-###############################################################################
-#All eSE terminals shall be match with the  /vendor/etc/vintf/manifest.xml file
-#under android.hardware.secure_element
-# The terminal name shall start from 1
-# Assign terminal number to each interface based on system config
-NXP_SPI_SE_TERMINAL_NUM="eSE1"
-###############################################################################
-# Assign terminal number to each interface based on system config
-#NXP_VISO_SE_TERMINAL_NUM="eSE3"
-###############################################################################
-# Assign terminal number to each interface based on system config
-NXP_NFC_SE_TERMINAL_NUM="eSE2"
-###############################################################################
-#For static or dynamic dual UICC feature support
-#Enable static dual uicc feature by setting value 0x00
-#Enable dynamic dual uicc feature by setting value 0x01
-NXP_DUAL_UICC_ENABLE=0x01
-###############################################################################
-# Time to wait by DH when NFCC will report eSE Cold Temp Error.
-# The value is as per the UM and in seconds
-NXP_SE_COLD_TEMP_ERROR_DELAY=0x05
-###############################################################################
-#OffHost ESE route location for MultiSE
-#ESE = 01
-OFFHOST_ROUTE_ESE={01}
-###############################################################################
-#OffHost UICC route location for MultiSE
-#UICC1 = 02
-#UICC2 = 03
-OFFHOST_ROUTE_UICC={02:03}
-
-###############################################################################
-#T4T NFCEE ENABLE
-#bit pos 0 = T4T NFCEE Enable
-#bit pos 6 = T4T NFCEE Contactless write enable
-NXP_T4T_NFCEE_ENABLE=0x01
-
-###############################################################################
-#CORE_SET_CONF_CMD to reset Prop Emvco Flag
-NXP_PROP_RESET_EMVCO_CMD={20, 02, 05, 01, A0, 44, 01, 00}
-
-###############################################################################
-#Guard time in ms for the mPOS/SCR module to process the reader start/stop req
-NXP_RDR_REQ_GUARD_TIME=0
-
-###############################################################################
-#MW workaround to enable LPCD when EMVCO polling mode starts and disable
-#while switching back to NFC Forum mode
-# 0 --> Disable MW workaround
-# 1 --> Enable MW workaround
-# 2 --> Use this option only for FW versions below 1.10.52
-NXP_RDR_DISABLE_ENABLE_LPCD=0
-
-###############################################################################
-# Firmware patch format, Only 1 and 5 should be set
-#   0 -> NFC Default
-#   1 -> EMVCO Default
-#   3 -> EMVCO Polling, DISC_IDLE = POWER_OFF, DISC DEACTIVATE =  Removal process
-#   5 -> EMVCO Cert Polling, DISC_IDLE = Removal process  , DISC DEACTIVATE =   POWER_OFF
-#   7 -> EMVCO Polling, DISC_IDLE = POWER_OFF, DISC DEACTIVATE =  POWER_OFF
-NFA_CONFIG_FORMAT=1
-
-#################################################################################
-# Enable disconnect tag in screen off
-# Disable           0x00
-# Enable            0x01
-NXP_DISCONNECT_TAG_IN_SCRN_OFF=0x01
-#################################################################################
-
-###############################################################################
-# Enable(0x01) or disable(0x00) non-standard tag reading
-# Disable Non-standard card read         0x00
-# Enable Non-standard card read          0x01
-NXP_SUPPORT_NON_STD_CARD=0x00
-#################################################################################
-# Enable(0x01) or disable(0x00 ) for getting HW Info log over SMB wired
-# Disable getting HW info log            0x00
-# Enable getting HW info log             0x01
-NXP_GET_HW_INFO_LOG=0x00
-#################################################################################
-# Enable(0x01) or disable(0x00) iso dep sak merge
-# Disable SAK merging         0x00
-# Enable SAK merging          0x01
-NXP_ISO_DEP_MERGE_SAK=0x01
-#################################################################################
-# Valid time difference range within for non-standard tag detection from first
-# Activation fail to next discovery
-# Note :- 1. This will take effect only when NXP_SUPPORT_NON_STD_CARD is enabled
-#         2. The number will be multiplied by 100ms by MW.
-# Default:
-# Set to 00 if not supported
-#  byte[0] MIFARE_CLASSIC 100ms
-#  byte[1] ISO_DEP        300ms
-NXP_NON_STD_CARD_TIMEDIFF={01, 03}
-#################################################################################
-# Enable or Disable UICC ETSI support
-# Disable UICC ETSI support         0
-# Enable UICC ETSI support          1
-NXP_UICC_ETSI_SUPPORT=0
-#################################################################################
-# Minimal FW Version used for recovery
-NXP_MINIMAL_FW_VERSION=0x110DE
-#################################################################################
-# Enable Stop/Start of RF discovery for NFCEE recovery
-# Disable RF Restart for NFCEE recovery   0
-# Enable RF Restart for NFCEE recovery    1
-NXP_RESTART_RF_FOR_NFCEE_RECOVERY=0
-#################################################################################
-#Tag Presence check timeout in millisecond.
-NXP_PRESENCE_CHECK_TIMEOUT = 375
-#################################################################################
-# Enable or Disable the minimal FW recovery support.
-# This logic will get enabled on early NFC hal boot.
-# Disable NFCC RECOVERY support          0x00
-# Enable  NFCC RECOVERY support          0x01
-NXP_NFCC_RECOVERY_SUPPORT=0x01
-#################################################################################

proprietary/vendor/etc/libnfc-nci.conf

@@ -1,120 +0,0 @@
-########################## Start of libnfc-nci.conf ###########################
-###############################################################################
-# Application options
-NFC_DEBUG_ENABLED=1
-###############################################################################
-# performance measurement
-# Change this setting to control how often USERIAL log the performance (throughput)
-# data on read/write/poll
-# defailt is to log performance dara for every 100 read or write
-#REPORT_PERFORMANCE_MEASURE=100
-###############################################################################
-# File used for NFA storage
-NFA_STORAGE="/data/nfc"
-###############################################################################
-# Configure the default NfcA/IsoDep techology and protocol route. Can be
-# either a secure element (e.g. 0xF4) or the host (0x00)
-#DEFAULT_ISODEP_ROUTE=0x00
-
-###############################################################################
-## Default poll duration (in ms)
-## The defualt is 500ms if not set
-NFA_DM_DISC_DURATION_POLL=500
-
-###############################################################################
-# Force UICC to only listen to the following technology(s).
-# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
-# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F
-UICC_LISTEN_TECH_MASK=0x07
-
-###############################################################################
-# Force HOST listen feature enable or disable.
-# 0: Disable
-# 1: Enable
-HOST_LISTEN_ENABLE=0x01
-###############################################################################
-# When screen is turned off, specify the desired power state of the controller.
-# 0: power-off-sleep state; DEFAULT
-# 1: full-power state
-# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
-SCREEN_OFF_POWER_STATE=1
-###############################################################################
-# Force tag polling for the following technology(s).
-# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
-# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
-#            NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
-#            NFA_TECHNOLOGY_MASK_B_PRIME |
-#            NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE.
-#
-# Notable bits:
-# NFA_TECHNOLOGY_MASK_A             0x01    /* NFC Technology A             */
-# NFA_TECHNOLOGY_MASK_B             0x02    /* NFC Technology B             */
-# NFA_TECHNOLOGY_MASK_F             0x04    /* NFC Technology F             */
-# NFA_TECHNOLOGY_MASK_ISO15693      0x08    /* Proprietary Technology       */
-# NFA_TECHNOLOGY_MASK_A_ACTIVE      0x40    /* NFC Technology A active mode */
-# NFA_TECHNOLOGY_MASK_F_ACTIVE      0x80    /* NFC Technology F active mode */
-POLLING_TECH_MASK=0x4F
-###############################################################################
-# Force P2P to only listen for the following technology(s).
-# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
-# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
-#            NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE
-#
-# Notable bits:
-# NFA_TECHNOLOGY_MASK_A             0x01    /* NFC Technology A             */
-# NFA_TECHNOLOGY_MASK_F             0x04    /* NFC Technology F             */
-# NFA_TECHNOLOGY_MASK_A_ACTIVE      0x40    /* NFC Technology A active mode */
-# NFA_TECHNOLOGY_MASK_F_ACTIVE      0x80    /* NFC Technology F active mode */
-P2P_LISTEN_TECH_MASK=0x45
-###############################################################################
-PRESERVE_STORAGE=0x01
-###############################################################################
-# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h.
-# The value is set to 3 by default as it assumes we will discover 0xF2,
-# 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced
-# so that the stack will not wait any longer than necessary.
-
-# Maximum EE supported number
-# NXP PN547C2 0x02
-# NXP PN65T 0x03
-# NXP PN548C2 0x02
-# NXP PN66T 0x03
-NFA_MAX_EE_SUPPORTED=0x03
-##############################################################################
-# Deactivate notification wait time out in seconds used in ETSI Reader mode
-# 0 - Infinite wait
-NFA_DM_DISC_NTF_TIMEOUT=0
-
-###############################################################################
-# AID_MATCHING constants
-# AID_MATCHING_EXACT_ONLY 0x00
-# AID_MATCHING_EXACT_OR_PREFIX 0x01
-# AID_MATCHING_PREFIX_ONLY 0x02
-#AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03
-AID_MATCHING_MODE=0x03
-###############################################################################
-# Preferred Secure Element for Technology based routing
-# eSE               0x01
-# UICC              0x02
-
-NXP_PRFD_TECH_SE=0x01
-
-################################################################################
-#Set bit to 1 , black list is enabled
-#Set bit to 0,  to disable balcklist
-NFA_AID_BLOCK_ROUTE=0x01
-
-################################################################################
-# Maximum WTX requests entertained by MW
-NXP_WM_MAX_WTX_COUNT=30
-################################################################################
-#Set the default Felica T3T System Code :
-#This settings will be used when application does not set this parameter
-DEFAULT_SYS_CODE={FE:FE}
-#########################################################################
-#Set NCI credit notification timeout value
-NXP_NCI_CREDIT_NTF_TIMEOUT=2
-#########################################################################
-
-#Set the OffHost AID supported power state:
-OFFHOST_AID_ROUTE_PWR_STATE=0x3B

proprietary/vendor/etc/libnfc-nxp-pnscr.conf

@@ -1,628 +0,0 @@
-## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn547)
-## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn547)
-###############################################################################
-# Application options
-# Logging Levels
-# NXPLOG_DEFAULT_LOGLEVEL    0x01
-# ANDROID_LOG_DEBUG          0x03
-# ANDROID_LOG_WARN           0x02
-# ANDROID_LOG_ERROR          0x01
-# ANDROID_LOG_SILENT         0x00
-NXPLOG_EXTNS_LOGLEVEL=0x03
-NXPLOG_NCIHAL_LOGLEVEL=0x03
-NXPLOG_NCIX_LOGLEVEL=0x03
-NXPLOG_NCIR_LOGLEVEL=0x03
-NXPLOG_FWDNLD_LOGLEVEL=0x03
-NXPLOG_TML_LOGLEVEL=0x03
-NFC_DEBUG_ENABLED=1
-
-###############################################################################
-# Nfc Device Node name
-NXP_NFC_DEV_NODE="/dev/nq-nci"
-
-###############################################################################
-# Extension for Mifare reader enable
-MIFARE_READER_ENABLE=0x01
-
-###############################################################################
-# File name for Firmware
-NXP_FW_NAME="libsn100u_fw.so"
-
-###############################################################################
-# System clock source selection configuration
-#define CLK_SRC_XTAL       1
-#define CLK_SRC_PLL        2
-NXP_SYS_CLK_SRC_SEL=0x02
-
-###############################################################################
-# System clock frequency selection configuration
-#define CLK_FREQ_13MHZ         1
-#define CLK_FREQ_19_2MHZ       2
-#define CLK_FREQ_24MHZ         3
-#define CLK_FREQ_26MHZ         4
-#define CLK_FREQ_38_4MHZ       5
-#define CLK_FREQ_52MHZ         6
-NXP_SYS_CLK_FREQ_SEL=0x02
-
-###############################################################################
-# The timeout value to be used for clock request acknowledgment
-# min value = 0x01 to max = 0x06
-#NXP_SYS_CLOCK_TO_CFG=0x06
-
-###############################################################################
-# The delay to try to start PLL/XTAL when using sys clock 256/fc units = ~18.8 us
-# min value = 0x01 to max = 0x1F
-#NXP_CLOCK_REQ_DELAY=0x16
-
-###############################################################################
-# NXP proprietary settings
-NXP_ACT_PROP_EXTN={2F, 02, 00}
-
-###############################################################################
-# NFC forum profile settings
-NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00}
-
-###############################################################################
-# NXP TVDD configurations settings
-# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported,
-# out of them only one can be configured at a time.
-#NXP_EXT_TVDD_CFG=0x02
-
-###############################################################################
-#config1:SLALM, 3.3V for both RM and CM
-#NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C}
-
-###############################################################################
-#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM,
-#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms
-#NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C}
-
-###############################################################################
-# Core configuration rf field filter settings to enable set to 01 to disable set
-# to 00 last bit
-#NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00 }
-
-###############################################################################
-# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set
-# to 0x00
-#NXP_I2C_FRAGMENTATION_ENABLED=0x00
-
-###############################################################################
-#set autonomous mode
-# disable autonomous 0x00
-# enable autonomous  0x01
-NXP_CORE_SCRN_OFF_AUTONOMOUS_ENABLE=0x00
-
-###############################################################################
-#Enable SWP full power mode when phone is power off
-#NXP_SWP_FULL_PWR_ON=0x00
-
-################################################################################
-#This is used to configure UICC2 or UICC3 at boot time.
-# UICC2              0x04
-# UICC3             0x08
-NXP_DEFAULT_UICC2_SELECT=0x04
-###############################################################################
-# CE when Screen state is locked
-# This setting is for DEFAULT_AID_ROUTE,
-# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE
-# Disable           0x00
-# Enable            0x01
-NXP_CE_ROUTE_STRICT_DISABLE=0x01
-
-###############################################################################
-#Timeout in secs to get NFCEE Discover notification
-NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20
-
-###############################################################################
-NXP_DEFAULT_NFCEE_TIMEOUT=20
-
-###############################################################################
-#Timeout in secs
-NXP_SWP_RD_START_TIMEOUT=0x0A
-
-###############################################################################
-#Timeout in secs
-NXP_SWP_RD_TAG_OP_TIMEOUT=0x01
-
-###############################################################################
-#Set the default AID route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_AID_ROUTE=0x01
-
-###############################################################################
-#Set the Mifare Desfire route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_DESFIRE_ROUTE=0x01
-
-###############################################################################
-#Set the Mifare CLT route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_MIFARE_CLT_ROUTE=0x01
-
-###############################################################################
-#Set the Felica CLT route Location :
-#This settings will be used when application does not set this parameter
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_FELICA_CLT_ROUTE=0x01
-
-###############################################################################
-#Set the default AID Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen On lock
-# bit pos 4 = Screen off unlock
-# bit pos 5 = Screen Off lock
-DEFAULT_AID_PWR_STATE=0x39
-###############################################################################
-#Set the Mifare Desfire Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen On lock
-# bit pos 4 = Screen off unlock
-# bit pos 5 = Screen Off lock
-DEFAULT_DESFIRE_PWR_STATE=0x3B
-
-###############################################################################
-#Set the Mifare CLT Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen On lock
-# bit pos 4 = Screen off unlock
-# bit pos 5 = Screen Off lock
-DEFAULT_MIFARE_CLT_PWR_STATE=0x3B
-
-###############################################################################
-#Set the Felica CLT Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen On lock
-# bit pos 4 = Screen off unlock
-# bit pos 5 = Screen Off lock
-DEFAULT_FELICA_CLT_PWR_STATE=0x3B
-###############################################################################
-#Set the default Felica T3T System Code OffHost route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_SYS_CODE_ROUTE=0xC0
-###############################################################################
-# AID Matching platform options
-# AID_MATCHING_L 0x01
-# AID_MATCHING_K 0x02
-#AID_MATCHING_PLATFORM=0x01
-
-###############################################################################
-# P61 interface options
-# NFC 0x01
-# SPI 0x02
-NXP_P61_LS_DEFAULT_INTERFACE=0x01
-
-###############################################################################
-# P61 LTSM interface options
-# NFC 0x01
-# SPI 0x02
-NXP_P61_LTSM_DEFAULT_INTERFACE=0x01
-
-###############################################################################
-#CHINA_TIANJIN_RF_SETTING
-#Enable  0x01
-#Disable  0x00
-#NXP_CHINA_TIANJIN_RF_ENABLED=0x01
-
-###############################################################################
-#SWP_SWITCH_TIMEOUT_SETTING
-# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60].
-# Timeout in milliseconds, for example
-# No Timeout  0x00
-# 10 millisecond timeout 0x0A
-#NXP_SWP_SWITCH_TIMEOUT=0x0A
-
-###############################################################################
-# Flashing Options Configurations
-# FLASH_UPPER_VERSION 0x01
-# FLASH_DIFFERENT_VERSION 0x02
-# FLASH_ALWAYS 0x03
-NXP_FLASH_CONFIG=0x01
-
-###############################################################################
-# P61 interface options for JCOP Download
-# NFC 0x01
-# SPI 0x02
-NXP_P61_JCOP_DEFAULT_INTERFACE=0x01
-
-###############################################################################
-# Option to perform LS update every boot
-# Enable 0x01
-# Disable    0x00
-NXP_LS_FORCE_UPDATE_REQUIRED=0x00
-
-###############################################################################
-# Option to perform JCOP update every boot
-# Enable 0x01
-# Disable 0x00
-NXP_JCOP_FORCE_UPDATE_REQUIRED=0x00
-
-###############################################################################
-# P61 JCOP OS download  options
-# FRAMEWORK API BY APPLICATION 0x00
-# AT BOOT_TIME 0x01
-NXP_JCOPDL_AT_BOOT_ENABLE=0x00
-
-###############################################################################
-# Loader service version
-# NFC service checks for LS version 2.0 or 2.1
-# LS2.0 0x20
-# LS2.1 0x21
-# LS2.2 0x22
-# AT NFC service intialization
-NXP_LOADER_SERVICE_VERSION=0x22
-
-###############################################################################
-#Timeout value  in milliseconds for NFCC standby mode.The range is between 5000
-#msec to 20000 msec and zero is to disable.
-NXP_NFCC_STANDBY_TIMEOUT=20000
-
-###############################################################################
-#Dynamic RSSI feature enable
-# Disable           0x00
-# Enable            0x01
-NXP_AGC_DEBUG_ENABLE=0x00
-
-###############################################################################
-#Virtual Mode ESE and Wired Mode ongoing delay Wired Mode
-# For Technology routing to ESE Technology Mask = 4
-# For ISO-DEP Protocol routing to ESE Mask      = 2
-# It can also take TECH|PROTO    = 6
-# To ignore the delay set mask to = 0
-#NXP_ESE_WIRED_PRT_MASK=0x00
-
-###############################################################################
-#Virtual Mode UICC and Wired Mode  ongoing delay Wired Mode
-#For Technology routing to UICC Technology Mask = 4
-#For ISO-DEP Protocol routing to UICC set Mask  = 2
-#For Select AID Routing to UICC       set Mask  = 1
-#It can also take values TECH|PROTO|SELECT_AID  = 7 , 6 , 5 ,3 .To ignore delay
-#set mask = 0
-#NXP_UICC_WIRED_PRT_MASK=0x00
-
-################################################################################
-#RF field true delay Wired Mode
-# delay wired mode = 1
-# allow wired mode = 0
-#NXP_WIRED_MODE_RF_FIELD_ENABLE=0x00
-
-###############################################################################
-#Config to allow adding aids
-#NFC on/off is required after this config
-#1 = enabling adding aid  to NFCC routing table.
-#0 = disabling adding aid to NFCC routing table.
-NXP_ENABLE_ADD_AID=0x01
-
-###############################################################################
-# JCOP-3.3 continuous process timeout in msec and value should be in Hexadecimal
-# JCOP CP TIMEOUT
-NXP_CP_TIMEOUT={00, 77}
-###############################################################################
-# Bail out mode
-#  If set to 1, NFCC is using bail out mode for either Type A or Type B poll.
-NFA_POLL_BAIL_OUT_MODE=0x01
-###############################################################################
-# Enable/Disable Block Route feature.
-# Block Route will restrict routing to first matched rule
-# Block Route enable   0x01
-# Block Route disable  0x00
-NFA_BLOCK_ROUTE=0x00
-
-###############################################################################
-# White list of Hosts
-# This values will be the Hosts(NFCEEs) in the HCI Network.
-DEVICE_HOST_WHITE_LIST={C0, 80}
-
-###############################################################################
-# Choose the presence-check algorithm for type-4 tag.  If not defined, the default value is 1.
-# 0  NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
-# 1  NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
-# 2 NFA_RW_PRES_CHK_ISO_DEP_NAK; Type - 4 tag protocol iso-dep nak presence check
-#    command is sent waiting for rsp and ntf.
-PRESENCE_CHECK_ALGORITHM=2
-###############################################################################
-# Enable/Disable checking default proto SE Id
-# Disable           0x00
-# Enable            0x01
-NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
-###############################################################################
-# Vendor Specific Proprietary Protocol & Discovery Configuration
-# Set to 0xFF if unsupported
-#  byte[0] NCI_PROTOCOL_18092_ACTIVE
-#  byte[1] NCI_PROTOCOL_B_PRIME
-#  byte[2] NCI_PROTOCOL_DUAL
-#  byte[3] NCI_PROTOCOL_15693
-#  byte[4] NCI_PROTOCOL_KOVIO
-#  byte[5] NCI_PROTOCOL_MIFARE
-#  byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
-#  byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
-#  byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
-NFA_PROPRIETARY_CFG={05, FF, FF, 06, 81, 80, 70, FF, FF}
-###############################################################################
-# SVDD sync off Delay in ms it can be max 20 ms
-# If out of range timeout used, default delay of 10ms will be set
-#NXP_SVDD_SYNC_OFF_DELAY=10
-
-###############################################################################
-#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE
-#Enable/Disable block number checks for china transit use case
-#Enable  0x01
-#Disable  0x00
-#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01
-
-###############################################################################
-#This config will enable different level of Rf transaction debugs based on the
-#following values provided. Decoded information will be printed in adb logcat
-#Debug Mode         Levels
-#Disable Debug      0x00
-#L1 Debug           0x01
-#L2 Debug           0x02
-#L1 & L2 Debug      0x03
-#L1 & L2 & RSSI     0x04
-#L1 & L2 & Felica   0x05
-NXP_CORE_PROP_SYSTEM_DEBUG=0x00
-
-###############################################################################
-#Enable NXP NCI runtime parser library
-#Enable 0x01
-#Disable 0x00
-NXP_NCI_PARSER_LIBRARY=0x00
-
-###############################################################################
-# Wired mode resume timeout vaule in wired mode resume feature enable
-# DWP resume time out in ms( 4 bytes hex value and LSB first)
-#example 1000 = 0x03E8
-#exmaple 2000 = 0x07D0
-#example 500 = 0x01F4
-#NXP_WIREDMODE_RESUME_TIMEOUT={E8,03,00,00}
-###############################################################################
-# Power to eSE is controlled by DH or PMU depending on following configurations
-#define DH_PWR_CONTROL         1
-#define PMU_PWR_CONTROL        2
-#NXP_ESE_POWER_DH_CONTROL=1
-
-###############################################################################
-# Timeout value in milliseconds for wired mode resume after RF field event timeout
-#NXP_NFCC_RF_FIELD_EVENT_TIMEOUT=3000
-
-###############################################################################
-# NXP PMU Support configuration is sent if PMU_PWR_CONTROL is configured
-# External PMU available in phone ON and phone OFF case if NXP_ESE_POWER_EXT_PMU=1
-# External PMU available only in phone ON case if NXP_ESE_POWER_EXT_PMU=2
-#NXP_ESE_POWER_EXT_PMU=2
-
-###############################################################################
-# Whether to allow wired mode in desfire and mifare CLT
-# Disable           0x00
-# Enable            0x01
-#NXP_ALLOW_WIRED_IN_MIFARE_DESFIRE_CLT=0x00
-
-###############################################################################
-# Send DWP interface reset command as part of SE open
-# Disable           0x00
-# Enable            0x01
-NXP_DWP_INTF_RESET_ENABLE=0x00
-
-###############################################################################
-# Timeout value in milliseconds for JCOP OS download to complete
-OS_DOWNLOAD_TIMEOUT_VALUE=60000
-
-###############################################################################
-# Timeout value in milliseconds to send response for Felica command received
-NXP_HCEF_CMD_RSP_TIMEOUT_VALUE=5000
-
-###############################################################################
-# Forcing HOST to listen for a selected protocol
-# 0x00 : Disable Host Listen
-# 0x01 : Enable Host to Listen (A)  for ISO-DEP tech A
-# 0x02 : Enable Host to Listen (B)  for ISO-DEP tech B
-# 0x04 : Enable Host to Listen (F)  for T3T Tag Type Protocol tech F
-# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F
-HOST_LISTEN_TECH_MASK=0x07
-
-###############################################################################
-# Enable forward functionality
-# Disable           0x00
-# Enable            0x01
-FORWARD_FUNCTIONALITY_ENABLE=0x01
-
-###############################################################################
-# Configure the NFC Extras to open and use a static pipe.  If the value is
-# not set or set to 0, then the default is use a dynamic pipe based on a
-# destination gate (see NFA_HCI_DEFAULT_DEST_GATE).  Note there is a value
-# for each EE (ESE/SIM)
-OFF_HOST_ESE_PIPE_ID=0x19
-OFF_HOST_SIM_PIPE_ID=0x70
-
-###############################################################################
-#Set the Felica T3T System Code Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen On lock
-# bit pos 4 = Screen off unlock
-# bit pos 5 = Screen Off lock
-DEFAULT_SYS_CODE_PWR_STATE=0x39
-###############################################################################
-#Default Secure Element route id
-DEFAULT_OFFHOST_ROUTE=0x02
-
-###############################################################################
-#Maximum SMB transceive wait for response
-NXP_SMB_TRANSCEIVE_TIMEOUT=2000
-###############################################################################
-# Firmware file type
-#.so file   0x01
-#.bin file  0x02
-NXP_FW_TYPE=0x01
-############################################################################
-# Extended APDU length for ISO_DEP
-ISO_DEP_MAX_TRANSCEIVE=0xFEFF
-#########################################################################
-# Support for Amendment I SEMS specification
-# Support SEMS Amendment I 0x01
-# Support NXP LS client    0x00
-NXP_GP_AMD_I_SEMS_SUPPORTED=0x01
-#########################################################################
-# Enable/Disable default route to host in case default se is not active
-# Disable feature   0x00
-# Enable feature    0x01
-NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
-###############################################################################
-# Assign terminal number to each interface based on system config
-NXP_SPI_SE_TERMINAL_NUM="eSE1"
-###############################################################################
-#########################################################################
-# Assign terminal number to each interface based on system config
-NXP_VISO_SE_TERMINAL_NUM="eSE3"
-###############################################################################
-#########################################################################
-# Assign terminal number to each interface based on system config
-NXP_NFC_SE_TERMINAL_NUM="eSE2"
-###############################################################################
-
-
-############################
-## libnfc-nxp_RF.conf
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#PMU_CFG
-NXP_RF_CONF_BLK_1={20, 02, 30, 01,
-    A0, 0E, 2C, F0, 00, 3E, 11, E4, E4, E4, 00, 00, 00, 00, 00, A7, 8E, FF, FF,
-    23, 23, 23, 23, 0A, 00, 00, 00, 00, 02, 00, 00, 01, 00, 10, 00, 04, 00, 00,
-    00, 17, 40, FF, 07, 13, 07, 05, 13
-}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#DPC_SETTINGS
-NXP_RF_CONF_BLK_2={20, 02, B6, 01,
-    A0, 0B, B2, 00, 00, 00, 14, 6A, 2A, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00,
-    00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00,
-    00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00,
-    00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00,
-    00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00,
-    00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00,
-    00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00,
-    00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00,
-    00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00,
-    00, 00, 00, 00, 00, 00, 00, 00, 00, 00
-}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-NXP_RF_CONF_BLK_3={20, 02, 2E, 05,
-    A0, 0D, 06, 10, 84, 30, 00, 00, 00,
-    A0, 0D, 06, 10, 60, 34, C9, 04, 00,
-    A0, 0D, 06, 60, 4E, FF, FF, FF, 01,
-    A0, 0D, 06, 60, 4F, FF, FF, FF, 01,
-    A0, 0D, 06, 60, 50, FF, FF, FF, 3F
-}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_4={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_5={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_6={
-#}
-
-
-NXP_RF_CONF_MAX_NUM=3
-###############################################################################
-# Core configuration extensions
-# It includes
-# Wired mode settings A0ED, A0EE
-# Tag Detector A040, A041, A043
-# Low Power mode A007
-# Clock settings A002, A003
-# PbF settings A008
-# Clock timeout settings A004
-# eSE (SVDD) PWR REQ settings A0F2
-# Window size A0D8
-# DWP Speed   A0D5
-# How eSE connected to PN553 A012
-# UICC2 bit rate A0D1
-# SWP1A interface A0D4
-# DWP intf behavior config, SVDD Load activated by default if set to 0x31 A037
-NXP_CORE_CONF_EXTN={20, 02, 09, 02,
-    A0, EC, 01, 01,
-    A0, ED, 01, 01
-}
-
-# A0, 40, 01, 00
-#       A0, F2, 01, 01,
-#       A0, 41, 01, 02,
-#       A0, 43, 01, 04,
-#       A0, 02, 01, 01,
-#       A0, 03, 01, 11,
-#       A0, 07, 01, 03,
-#       A0, 08, 01, 01
-#       }
-
-###############################################################################
-# Core configuration settings
-NXP_CORE_CONF={ 20, 02, 30, 10,
-        28, 01, 00,
-        21, 01, 00,
-        30, 01, 04,
-        31, 01, 00,
-        32, 01, 60,
-        38, 01, 01,
-        33, 00,
-        54, 01, 06,
-        50, 01, 02,
-        5B, 01, 00,
-        80, 01, 01,
-        81, 01, 01,
-        82, 01, 0E,
-        18, 01, 01,
-        68, 01, 01,
-        85, 01, 01
-        }
-###############################################################################

proprietary/vendor/etc/libnfc-nxp.conf

@@ -1,551 +0,0 @@
-#################### This file is used by NXP NFC NCI HAL #####################
-# Sep.24, 2020 - Merged from MW11.51.F1 by Jian
-###############################################################################
-# Application options
-# Logging Levels
-# NXPLOG_DEFAULT_LOGLEVEL    0x01
-# ANDROID_LOG_DEBUG          0x03
-# ANDROID_LOG_WARN           0x02
-# ANDROID_LOG_ERROR          0x01
-# ANDROID_LOG_SILENT         0x00
-NXPLOG_EXTNS_LOGLEVEL=0x03
-NXPLOG_NCIHAL_LOGLEVEL=0x03
-NXPLOG_NCIX_LOGLEVEL=0x03
-NXPLOG_NCIR_LOGLEVEL=0x03
-NXPLOG_FWDNLD_LOGLEVEL=0x03
-NXPLOG_TML_LOGLEVEL=0x03
-NFC_DEBUG_ENABLED=1
-
-###############################################################################
-# Nfc Device Node name
-NXP_NFC_DEV_NODE="/dev/nq-nci"
-
-#################################################################################
-#VEN Toggle Config
-#Disable = 0x00
-#Enable  = 0x01
-ENABLE_VEN_TOGGLE=0x00
-
-###############################################################################
-# Extension for Mifare reader enable
-MIFARE_READER_ENABLE=0x01
-
-###############################################################################
-# Mifare Reader implementation
-# 0: General implementation
-# 1: Legacy implementation
-LEGACY_MIFARE_READER=0
-
-###############################################################################
-# File name for Firmware
-NXP_FW_NAME="libsn100u_fw.so"
-
-###############################################################################
-# NXP proprietary settings
-NXP_ACT_PROP_EXTN={2F, 02, 00}
-
-###############################################################################
-# NFC forum profile settings
-NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00}
-
-###############################################################################
-# NXP TVDD configurations settings
-# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported,
-# out of them only one can be configured at a time.
-# For PN553 only
-#NXP_EXT_TVDD_CFG=0x02
-
-###############################################################################
-#config1:SLALM, 3.3V for both RM and CM
-#NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C}
-
-###############################################################################
-#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM,
-#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms
-#NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C}
-
-###############################################################################
-# Core configuration rf field filter settings to enable set to 01 to disable set
-# to 00 last bit
-#NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00 }
-
-###############################################################################
-# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set
-# to 0x00
-#NXP_I2C_FRAGMENTATION_ENABLED=0x00
-
-###############################################################################
-#set autonomous mode
-# disable autonomous 0x00
-# enable autonomous  0x01
-NXP_AUTONOMOUS_ENABLE=0x00
-###############################################################################
-#set Guard Timer
-# Gurad Timer range to 0x0F-0xFF(i.e.15-255 seconds)
-NXP_GUARD_TIMER_VALUE=0x0F
-###############################################################################
-#Enable SWP full power mode when phone is power off
-#NXP_SWP_FULL_PWR_ON=0x00
-
-################################################################################
-#This is used to configure UICC2 at boot time.
-# UICC2              0x03
-NXP_DEFAULT_UICC2_SELECT=0x03
-###############################################################################
-# CE when Screen state is locked
-# This setting is for DEFAULT_AID_ROUTE,
-# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE
-# Disable           0x00
-# Enable            0x01
-NXP_CE_ROUTE_STRICT_DISABLE=0x01
-
-###############################################################################
-#Timeout in secs
-NXP_SWP_RD_TAG_OP_TIMEOUT=20
-
-###############################################################################
-#Set the default AID route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_AID_ROUTE=0x01
-
-###############################################################################
-#Set the ISODEP (Mifare Desfire) route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_ISODEP_ROUTE=0x01
-
-###############################################################################
-#Set the Mifare CLT route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_MIFARE_CLT_ROUTE=0x01
-
-###############################################################################
-#Set the Felica CLT route Location :
-#This settings will be used when application does not set this parameter
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_FELICA_CLT_ROUTE=0x01
-
-###############################################################################
-#Set the default AID Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_AID_PWR_STATE=0x3B
-
-###############################################################################
-#Set the Mifare Desfire Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_DESFIRE_PWR_STATE=0x3B
-
-###############################################################################
-#Set the Mifare CLT Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_MIFARE_CLT_PWR_STATE=0x3B
-
-###############################################################################
-#Set the Felica CLT Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_FELICA_CLT_PWR_STATE=0x3B
-
-###############################################################################
-#Set the T4TNfcee AID Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_T4TNFCEE_AID_POWER_STATE=0x3B
-
-###############################################################################
-#Set the default Felica T3T System Code OffHost route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_SYS_CODE_ROUTE=0x00
-###############################################################################
-# AID Matching platform options
-# AID_MATCHING_L 0x01
-# AID_MATCHING_K 0x02
-#AID_MATCHING_PLATFORM=0x01
-
-###############################################################################
-# P61 interface options
-# SPI 0x02
-NXP_P61_LS_DEFAULT_INTERFACE=0x02
-
-###############################################################################
-#CHINA_TIANJIN_RF_SETTING
-#Enable  0x01
-#Disable  0x00
-#NXP_CHINA_TIANJIN_RF_ENABLED=0x01
-
-###############################################################################
-#SWP_SWITCH_TIMEOUT_SETTING
-# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60].
-# Timeout in milliseconds, for example
-# No Timeout  0x00
-# 10 millisecond timeout 0x0A
-#NXP_SWP_SWITCH_TIMEOUT=0x0A
-
-###############################################################################
-# Flashing Options Configurations
-# FLASH_UPPER_VERSION 0x01
-# FLASH_DIFFERENT_VERSION 0x02
-# FLASH_ALWAYS 0x03
-NXP_FLASH_CONFIG=0x02
-
-###############################################################################
-# P61 interface options for JCOP Download
-# SPI 0x02
-NXP_P61_JCOP_DEFAULT_INTERFACE=0x02
-
-###############################################################################
-# Option to perform LS update every boot
-# Enable 0x01
-# Disable    0x00
-NXP_LS_FORCE_UPDATE_REQUIRED=0x00
-
-###############################################################################
-# Option to perform JCOP update every boot
-# Enable 0x01
-# Disable 0x00
-NXP_JCOP_FORCE_UPDATE_REQUIRED=0x00
-
-###############################################################################
-# Bail out mode
-#  If set to 1, NFCC is using bail out mode for either Type A or Type B poll.
-#  Set this parameter value to 1 if Android Beam is enabled, else set to 0.
-NFA_POLL_BAIL_OUT_MODE=0x00
-
-###############################################################################
-# White list of Hosts
-# This values will be the Hosts(NFCEEs) in the HCI Network.
-DEVICE_HOST_WHITE_LIST={C0, 80}
-
-###############################################################################
-# Choose the presence-check algorithm for type-4 tag.  If not defined, the default value is 1.
-# 0  NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
-# 1  NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
-# 2 NFA_RW_PRES_CHK_ISO_DEP_NAK; Type - 4 tag protocol iso-dep nak presence check
-#    command is sent waiting for rsp and ntf.
-PRESENCE_CHECK_ALGORITHM=2
-###############################################################################
-# Options to Fallback to alternative route
-# Disable           0x00
-# DH                0x01
-# ESE               0x02
-NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
-###############################################################################
-# Vendor Specific Proprietary Protocol & Discovery Configuration
-# Set to 0xFF if unsupported
-#  byte[0] NCI_PROTOCOL_18092_ACTIVE
-#  byte[1] NCI_PROTOCOL_B_PRIME
-#  byte[2] NCI_PROTOCOL_DUAL
-#  byte[3] NCI_PROTOCOL_15693
-#  byte[4] NCI_PROTOCOL_KOVIO
-#  byte[5] NCI_PROTOCOL_MIFARE
-#  byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
-#  byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
-#  byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
-NFA_PROPRIETARY_CFG={05, FF, FF, 06, 81, 80, FF, FF, FF}
-
-###############################################################################
-#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE
-#Enable/Disable block number checks for china transit use case
-#Enable  0x01
-#Disable  0x00
-#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01
-
-################################################################################
-#This flags will enable different modes of Lx Debug based on bits of the Byte0
-#Byte 0:
-# |_________Bit Mask_______|   Debug Mode
-#  b7|b6|b5|b4|b3|b2|b1|b0|
-#    |  |x |  |  |  |  |  |    Modulation Detected Notification
-#    |  |  |X |  |  |  |  |    Enable L1 Events (ISO14443-4, ISO18092)
-#    |  |  |  |X |  |  |  |    Enable L2 Reader Events(ROW specific)
-#    |  |  |  |  |X |  |  |    Enable Felica SystemCode
-#    |  |  |  |  |  |X |  |    Enable Felica RF (all Felica CM events)
-#    |  |  |  |  |  |  |X |    Enable L2 Events CE (ISO14443-3, RF Field ON/OFF)
-#Byte 1: RFU, shall always be 0x00
-#                              Byte1    Byte0
-#                                  \__ __/
-# e.g. NXP_CORE_PROP_SYSTEM_DEBUG=0x0031 ==> Modulation detected, L1, L2 CE
-NXP_CORE_PROP_SYSTEM_DEBUG=0x0000
-
-###############################################################################
-#Enable NXP NCI runtime parser library
-#Enable 0x01
-#Disable 0x00
-NXP_NCI_PARSER_LIBRARY=0x00
-
-###############################################################################
-# Timeout value in milliseconds for JCOP OS download to complete
-OS_DOWNLOAD_TIMEOUT_VALUE=60000
-
-###############################################################################
-# Forcing HOST to listen for a selected protocol
-# 0x00 : Disable Host Listen
-# 0x01 : Enable Host to Listen (A)  for ISO-DEP tech A
-# 0x02 : Enable Host to Listen (B)  for ISO-DEP tech B
-# 0x04 : Enable Host to Listen (F)  for T3T Tag Type Protocol tech F
-# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F
-HOST_LISTEN_TECH_MASK=0x07
-
-###############################################################################
-# Enable forward functionality
-# Disable           0x00
-# Enable            0x01
-FORWARD_FUNCTIONALITY_ENABLE=0x01
-
-###############################################################################
-# Configure the NFC Extras to open and use a static pipe.  If the value is
-# not set or set to 0, then the default is use a dynamic pipe based on a
-# destination gate (see NFA_HCI_DEFAULT_DEST_GATE).  Note there is a value
-# for each EE (ESE/SIM1/SIM2)
-OFF_HOST_ESE_PIPE_ID=0x16
-OFF_HOST_SIM_PIPE_ID=0x0A
-OFF_HOST_SIM2_PIPE_ID=0x23
-
-###############################################################################
-#Set the Felica T3T System Code Power state :
-#This settings will be used when application does not set this parameter
-#Update Power state as per NCI2.0
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen On lock
-# bit pos 4 = Screen off unlock
-# bit pos 5 = Screen Off lock
-DEFAULT_SYS_CODE_PWR_STATE=0x00
-###############################################################################
-#Default Secure Element route id
-DEFAULT_OFFHOST_ROUTE=0x02
-
-###############################################################################
-#Maximum SMB transceive wait for response
-NXP_SMB_TRANSCEIVE_TIMEOUT=2000
-###############################################################################
-# Firmware file type
-#.so file   0x01
-#.bin file  0x02
-NXP_FW_TYPE=0x01
-############################################################################
-# Extended APDU length for ISO_DEP
-ISO_DEP_MAX_TRANSCEIVE=0xFEFF
-#########################################################################
-# Support for Amendment I SEMS specification
-# Support SEMS Amendment I 0x01
-# Support NXP LS client    0x00
-NXP_GP_AMD_I_SEMS_SUPPORTED=0x01
-
-###############################################################################
-#All eSE terminals shall be match with the  /vendor/etc/vintf/manifest.xml file
-#under android.hardware.secure_element
-# The terminal name shall start from 1
-# Assign terminal number to each interface based on system config
-NXP_SPI_SE_TERMINAL_NUM="eSE1"
-###############################################################################
-# Assign terminal number to each interface based on system config
-#NXP_VISO_SE_TERMINAL_NUM="eSE3"
-###############################################################################
-# Assign terminal number to each interface based on system config
-NXP_NFC_SE_TERMINAL_NUM="eSE2"
-###############################################################################
-#For static or dynamic dual UICC feature support
-#Enable static dual uicc feature by setting value 0x00
-#Enable dynamic dual uicc feature by setting value 0x01
-NXP_DUAL_UICC_ENABLE=0x01
-###############################################################################
-# Time to wait by DH when NFCC will report eSE Cold Temp Error.
-# The value is as per the UM and in seconds
-NXP_SE_COLD_TEMP_ERROR_DELAY=0x05
-
-###############################################################################
-# Set configuration optimization decision setting
-# Enable    = 0x01
-# Disable   = 0x00
-NXP_SET_CONFIG_ALWAYS=0x01
-
-###############################################################################
-#OffHost ESE route location for MultiSE
-#ESE = 01
-OFFHOST_ROUTE_ESE={01}
-
-###############################################################################
-#OffHost UICC route location for MultiSE
-#UICC1 = 02
-#UICC2 = 03
-OFFHOST_ROUTE_UICC={02:03}
-
-###############################################################################
-#T4T NFCEE ENABLE
-#bit pos 0 = T4T NFCEE Enable
-#bit pos 6 = T4T NFCEE Contactless write enable
-NXP_T4T_NFCEE_ENABLE=0x01
-
-###############################################################################
-#CORE_SET_CONF_CMD to reset Prop Emvco Flag
-NXP_PROP_RESET_EMVCO_CMD={20, 02, 05, 01, A0, 44, 01, 00}
-
-###############################################################################
-#Guard time in ms for the mPOS/SCR module to process the reader start/stop req
-NXP_RDR_REQ_GUARD_TIME=0
-
-###############################################################################
-#MW workaround to enable LPCD when EMVCO polling mode starts and disable
-#while switching back to NFC Forum mode
-# 0 --> Disable MW workaround
-# 1 --> Enable MW workaround
-# 2 --> Use this option only for FW versions below 1.10.52
-NXP_RDR_DISABLE_ENABLE_LPCD=0
-
-###############################################################################
-# Firmware patch format, Only 1 and 5 should be set
-#   0 -> NFC Default
-#   1 -> EMVCO Default
-#   3 -> EMVCO Polling, DISC_IDLE = POWER_OFF, DISC DEACTIVATE =  Removal process
-#   5 -> EMVCO Cert Polling, DISC_IDLE = Removal process  , DISC DEACTIVATE =   POWER_OFF
-#   7 -> EMVCO Polling, DISC_IDLE = POWER_OFF, DISC DEACTIVATE =  POWER_OFF
-NFA_CONFIG_FORMAT=1
-
-################################################################################
-# This will enable power state required for GSMA testing.
-# When this is enabled , then default AID route power state is added with this power state
-# If any aid with power state 0 is added, then this power state is used.
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFUALT_GSMA_PWR_STATE=0x3B
-
-#################################################################################
-# Enable disconnect tag in screen off
-# Disable           0x00
-# Enable            0x01
-NXP_DISCONNECT_TAG_IN_SCRN_OFF=0x01
-#################################################################################
-# Core configuration extensions
-# It includes
-# Wired mode settings A0ED, A0EE
-# Tag Detector A040, A041, A043
-# Low Power mode A007
-# Clock settings A002, A003
-# PbF settings A008
-# Clock timeout settings A004
-# eSE (SVDD) PWR REQ settings A0F2
-# Window size A0D8
-# DWP Speed   A0D5
-# How eSE connected to PN553 A012
-# UICC2 bit rate A0D1
-# SWP1A interface A0D4
-# DWP intf behavior config, SVDD Load activated by default if set to 0x31 A037
-# Delay between EVT_END_OF_OPERATION and SE Deactivation set to 0x32(5ms) A113
-NXP_CORE_CONF_EXTN={20, 02, 21, 07,
-    A0, EC, 01, 01,
-    A0, ED, 01, 01,
-    A1, 13, 01, 32,
-    A0, 07, 01, 01,
-    A0, 0A, 01, 20,
-    A0, 47, 02, 00, 27,
-    A0, 85, 04, 58, 08, A8, AC
-}
-
-#       A0, 40, 01, 00
-#       A0, 41, 01, 02,
-#       A0, 43, 01, 04,
-#       }
-
-###############################################################################
-# Core configuration settings
-NXP_CORE_CONF={ 20, 02, 33, 11,
-        28, 01, 00,
-        21, 01, 00,
-        30, 01, 04,
-        31, 01, 00,
-        32, 01, 60,
-        38, 01, 01,
-        33, 00,
-        54, 01, 06,
-        50, 01, 02,
-        5B, 01, 00,
-        3E, 01, 00,
-        80, 01, 01,
-        81, 01, 01,
-        82, 01, 0E,
-        18, 01, 01,
-        68, 01, 01,
-        85, 01, 01
-        }
-###############################################################################
-# Enable(0x01) or disable(0x00) non-standard tag reading
-# Disable Non-standard card read         0x00
-# Enable Non-standard card read          0x01
-NXP_SUPPORT_NON_STD_CARD=0x01
-#################################################################################
-# Enable(0x01) or disable(0x00) iso dep sak merge
-# Disable SAK merging         0x00
-# Enable SAK merging          0x01
-NXP_ISO_DEP_MERGE_SAK=0x01
-#################################################################################
-# Enable(0x01) or disable(0x00 ) for getting HW Info log over SMB wired
-# Disable getting HW info log            0x00
-# Enable getting HW info log             0x01
-NXP_GET_HW_INFO_LOG=0x00
-#################################################################################
-# Valid time difference range within for non-standard tag detection from first
-# Activation fail to next discovery
-# Note :- This will take effect only when NXP_SUPPORT_NON_STD_CARD is enabled
-# Default         100 ms
-NXP_NON_STD_CARD_TIMEDIFF={01:03}
-#################################################################################
-# TAI Timeout
-NXP_SRD_TIMEOUT={2C:01}
-#################################################################################
-# Enable wait/delay if RF session is active.
-# Disable           0x00
-# Enable            0x01
-NXP_CE_PRIORITY_ENABLED=0x00
-
-#################################################################################

proprietary/vendor/etc/libnfc-nxp_RF.conf

@@ -1,228 +0,0 @@
-##############################################################
-## Sep.24, 2020 - Merged from MW11.51.F1 by Jian   RF tuning by jinzhi Nov.8 2021 #############
-## Nov.8,  2021  RF tuning by jinzhi #############
-## L3 P2.1 libnfc-nxp_RF.conf  FW60 test 30,Aug. 2020#########
-###############################################################################
-# System clock source selection configuration
-#define CLK_SRC_XTAL       1
-#define CLK_SRC_PLL        2
-NXP_SYS_CLK_SRC_SEL=0x02
-
-###############################################################################
-# System clock frequency selection configuration
-#define CLK_FREQ_13MHZ         1
-#define CLK_FREQ_19_2MHZ       2
-#define CLK_FREQ_24MHZ         3
-#define CLK_FREQ_26MHZ         4
-#define CLK_FREQ_38_4MHZ       5
-#define CLK_FREQ_52MHZ         6
-NXP_SYS_CLK_FREQ_SEL=0x02
-
-###############################################################################
-# The timeout value to be used for clock request acknowledgment
-# min value = 0x01 to max = 0x06
-#NXP_SYS_CLOCK_TO_CFG=0x06
-
-###############################################################################
-# The delay to try to start PLL/XTAL when using sys clock 256/fc units = ~18.8 us
-# min value = 0x01 to max = 0x1F
-NXP_CLOCK_REQ_DELAY=0x1E
-
-###############################################################################
-# MAX 20 RF configuration blocks are supported by MW
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#PMU_CFG
-
-NXP_RF_CONF_BLK_1={
-          20, 02, DF, 05,
-          A0, 0E, 2C, F0, 00, 3E, 11, E4, E4, E4, 00, 00, 00, 00, 00, A7, 8E, FF, FF, 23, 23, 23, 23, 0A, 00, 00, 00, 00, 02, 00, 00, 01, 00, 10, 00, 04, 00, 00, 00, 17, 40, FF, 07, 13, 07, 05, 13,
-          A0, A4, 85, 14, 00, 01, 00, 00, 00, 00, 00, 00, 01, 00, 03, 00, 05, 00, 07, 00, 08, 00, 0A, 00, 0C, 00, 0E, 00, 10, 00, 11, 00, 13, 00, 14, 00, 16, 00, 18, 00, 19, 00, 1A, 00, 1C, 00, 1D, 00, 1F, 00, 20, 00, 21, 00, 24, 00, 25, 00, 27, 00, 29, 00, 2A, 00, 2C, 00, 2D, 00, 2F, 00, 31, 00, 32, 00, 34, 00, 35, 00, 37, 00, 39, 00, 3A, 00, 3C, 00, 3D, 00, 3F, 00, 41, 00, 42, 00, 44, 00, 46, 00, 47, 00, 49, 00, 4A, 00, 4C, 00, 4E, 00, 4F, 00, 51, 00, 52, 00, 54, 00, 56, 00, 57, 00, 59, 00, 5A, 00, 5C, 00, 5E, 00, 5F, 00, 61, 00, 62, 00, 64, 00,
-          A0, A5, 0D, 3B, 3B, 3B, 3B, 3B, 3B, FF, 03, 1F, 00, 3B, 00, 00,
-          A0, 6A, 10, B0, 04, B0, 04, B0, 04, B0, 04, 38, 04, 38, 04, 38, 04, 38, 04,
-          A1, 34, 01, 04
-}
-
-NXP_RF_CONF_BLK_2={
-          20, 02, F5, 02,
-          A0,   34,   C8,   23,   04,   3D,   01,   02,   19,   EF,   08,   00,   00,   B9,   0A,   00,   00,   B9,   0A,   00,   00,   4C,   0E,   00,   00,   15,   10,   00,   00,   15,   10,   00,   00,   15,   10,   00,   00,   15,   10,   00,   00,   71,   15,   00,   00,   71,   15,   00,   00,   71,   15,   00,   00,   71,   15,   00,   00,   71,   15,   00,   00,   CE,   1A,   00,   00,   CE,   1A,   00,   00,   CE,   1A,   00,   00,   60,   1E,   00,   00,   2A,   20,   00,   00,   BD,   23,   00,   00,   75,   2E,   00,   00,   08,   32,   00,   00,   9C,   3A,   00,   00,   9C,   3A,   00,   00,   9C,   3A,   00,   00,   06,   19,   93,   03,   00,   00,   93,   03,   00,   00,   93,   03,   00,   00,   93,   03,   00,   00,   26,   07,   00,   00,   26,   07,   00,   00,   26,   07,   00,   00,   DE,   11,   00,   00,   71,   15,   00,   00,   71,   15,   00,   00,   7A,   47,   00,   00,   7A,   47,   00,   00,   7A,   47,   00,   00,   7A,   47,   00,   00,   7A,   47,   00,   00,   7A,   47,   00,   00,   7A,   47,   00,   00,   7A,   47,   00,   00,   7A,   47,   00,   00,   7A,   47,   00,   00,   7A,   47,   00,   00,   7A,   47,   00,   00,   7A,   47,   00,   00,   7A,   47,   00,   00,
-          A0, 28, 26, 03, 00, 00, 03, CB, 3C, 00, 00, 78, 00, 00, C4, FF, 00, 88, FF, 00, 4C, FF, 00, 10, FF, 00, D4, FE, 00, 98, FE, 00, 5C, FE, 00, 20, FE, 00, E4, FD, 00
-}
-
-NXP_RF_CONF_BLK_3={
-		  20, 02, 66, 01,
-	      A1, 0A, 62, 09, 18, 7A, 03, 00, 00, 7A, 03, 00, 00, 7A, 03, 00, 00, 7A, 03, 00, 00, 7A, 03, 00, 00, 78, 05, 00, 00, 08, 07, 00, 00, FC, 08, 00, 00, FC, 08, 00, 00, 92, 09, 00, 00, 92, 09, 00, 00, DC, 0A, 00, 00, DC, 0A, 00, 00, 48, 0D, 00, 00, 30, 11, 00, 00, 30, 11, 00, 00, 8E, 12, 00, 00, 7C, 15, 00, 00, 70, 17, 00, 00, 58, 1B, 00, 00, 40, 1F, 00, 00, 28, 23, 00, 00, 28, 23, 00, 00, 28, 23, 00, 00
-}
-
-NXP_RF_CONF_BLK_4={20, 02, F1, 01, A0, A9, ED, 00, 2A, FF, 01, 24, FF, 02, 1F, FF, 03, 1A, FF, 04, 16, FF, 05, 12, FF, 06, 0F, FF, 07, 0C, FF, 08, 09, FF, 09, 07, FF, 0A, 05, FF, 0B, 03, FF, 0C, 01, FF, 0D, 00, F5, 0E, 00, DC, 0F, 00, C6, 10, 00, B3, 11, 00, A2, 12, 00, 92, 13, 00, 84, 14, 00, 77, 15, 00, 6B, 16, 00, 60, 17, 00, 57, 18, 00, 4E, 19, 00, 46, 1A, 00, 3F, 1B, 00, 39, 1C, 00, 33, 1D, 00, 2E, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A, 1E, 00, 2A}
-
-
-NXP_RF_CONF_BLK_5={
-		  20, 02, C5, 02,
-	      A0, 0B, BB, 00, 1D, 01, 14, 6A, 2A, E8, 03, E8, 03, 06, 10, 0E, 2C, 01, 78, 13, 00, 00, 78, 13, 00, 00, 78, 13, 00, 00, 78, 13, 00, 00, 78, 13, 00, 00, 78, 13, 00, 00, 78, 13, 00, 00, 78, 0A, 00, 00, 78, 0A, 00, 00, 78, 0A, 00, 00, 78, 0A, 00, 00, 78, 0A, 00, 00, 78, 0A, 00, 00, 78, 0A, 00, 00, 78, 0A, 00, 00, 78, 0A, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 78, 00, 00, 00, 3C, 00, 00, 00, 3C, 00, 00, 00, 3C, 00, 00, 00, 00, 00, 00, 00,
-	      A0, A6, 03, C0, 08, 08
-}
-
-NXP_RF_CONF_BLK_6={
-		  20, 02, E9, 05,
-	      A0, AB, 82, 27, 1B, 33, 04, 42, 04, 55, 04, 75, 04, 9E, 04, C7, 04, F0, 04, 20, 05, 4F, 05, 7F, 05, B8, 05, F2, 05, 2B, 06, 72, 06, BA, 06, 02, 07, 49, 07, 91, 07, F0, 07, 50, 08, AF, 08, 0F, 09, 6E, 09, E1, 09, 54, 0A, C6, 0A, 56, 0B, E5, 0B, 74, 0C, 04, 0D, 93, 0D, 52, 0E, 11, 0F, D0, 0F, 8F, 10, 4F, 11, 0E, 12, 2C, 13, 4B, 14, 6A, 15, 88, 16, A7, 17, C6, 18, 44, 1A, C2, 1B, 41, 1D, BF, 1E, 9D, 20, 7B, 22, 58, 24, 96, 26, D3, 28, 11, 2B, 4E, 2D, 4B, 30, 47, 33, 44, 36, 40, 39, 3D, 3C, A2, 3F, 07, 43, 6C, 46, E6, 4A, 61, 4F,
-	      A0, A7, 0B, 00, 02, 77, 17, 1F, 1F, 1F, 0A, FF, 19, 05,
-	      A0, A8, 38, 00, 33, 33, 10, 00, 33, 23, 10, 00, 33, 24, 10, 4B, 23, 44, 10, CF, 22, 43, 10, CF, 22, 43, 10, CF, 22, 43, 10, CE, 22, 43, 10, CF, 22, 43, 10, CE, 22, 43, 10, 00, 33, 22, 10, C0, 22, 23, 10, 00, 33, 22, 10, C0, 22, 23, 10,
-	      A0, 98, 08, 2F, 97, 1C, 80, 23, 2F, 2F, 2F,
-	      A0, 9E, 0C, 0B, 97, 1C, 96, 00, 96, 00, 2B, 52, 03, 00, 00
-}
-
-NXP_RF_CONF_BLK_7={
-		  20, 02, FB, 14,
-	      A0, C6, 5B, 00, 00, 04, 00, 00, 00, 3C, 00, 00, 00, 20, 80, FF, 01, 00, 00, 64, 00, 00, C0, 00, 00, 00, C0, 00, 00, 00, 01, 01, 01, 20, 01, 03, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00,
-	      A0, 0D, 06, 10, C9, 30, 00, 40, 00,
-	      A0, 0D, 03, 24, 29, 07,
-	      A0, 0D, 03, 24, 30, 07,
-	      A0, 0D, 03, 25, 29, 01,
-	      A0, 0D, 03, 25, 30, 01,
-	      A0, 0D, 06, 40, 42, F0, C1, 37, CC,
-	      A0, 0D, 06, 41, 45, 31, 12, 00, 00,
-	      A0, 0D, 03, 42, 7C, 54,
-	      A0, 0D, 06, 42, 8D, 00, A0, A4, 64,
-	      A0, 0D, 06, 42, 8B, 00, A2, 23, 00,
-	      A0, 0D, 06, 42, 89, 7F, 12, BD, 01,
-	      A0, 0D, 06, 42, 44, 00, B0, 66, 01,
-	      A0, 0D, 06, 42, 43, 24, 24, 4D, ED,
-	      A0, 0D, 06, 42, 41, FD, FF, 5F, F0,
-	      A0, 0D, 06, 42, 40, 20, 77, 33, 3A,
-	      A0, 0D, 06, 42, 4A, 00, 00, 00, 00,
-	      A0, 0D, 06, 42, 49, 00, 00, 00, 00,
-	      A0, 0D, 06, 51, 40, 32, 77, 33, 3A,
-	      A0, 0D, 06, 43, 44, 00, 34, 52, 01
-}
-
-NXP_RF_CONF_BLK_8={
-		  20, 02, FD, 1C,
-	      A0, 0D, 06, 43, 43, A5, 64, 4C, AD,
-	      A0, 0D, 06, 43, 40, 05, 77, 33, 3D,
-	      A0, 0D, 06, 43, 4A, 00, 00, 00, 00,
-	      A0, 0D, 06, 43, 49, 00, 00, 00, 00,
-	      A0, 0D, 06, 44, 44, 00, 34, 52, 01,
-	      A0, 0D, 06, 44, 43, A5, 64, 4C, AD,
-	      A0, 0D, 06, 44, 40, 05, 77, 33, 3D,
-	      A0, 0D, 06, 44, 4A, 00, 00, 00, 00,
-	      A0, 0D, 06, 44, 49, 00, 00, 00, 00,
-	      A0, 0D, 06, 45, 44, 00, 34, 52, 01,
-	      A0, 0D, 06, 45, 43, A5, 64, 4C, AD,
-	      A0, 0D, 06, 45, 40, 05, 77, 33, 3D,
-	      A0, 0D, 06, 45, 4A, 00, 00, 00, 00,
-	      A0, 0D, 06, 45, 49, 00, 00, 00, 00,
-	      A0, 0D, 06, 46, 45, 39, 12, 00, 00,
-	      A0, 0D, 06, 46, 44, 00, 34, 52, 01,
-	      A0, 0D, 06, 47, 43, A5, 64, 4C, ED,
-	      A0, 0D, 06, 47, 40, 05, 77, 33, 3D,
-	      A0, 0D, 06, 47, 4A, 20, AA, 0B, 81,
-	      A0, 0D, 06, 47, 49, B5, 44, 22, 00,
-	      A0, 0D, 06, 48, 43, A5, 64, 4C, AD,
-	      A0, 0D, 06, 48, 40, 05, 77, 33, 3D,
-	      A0, 0D, 06, 48, 4A, 00, 00, 00, 00,
-	      A0, 0D, 06, 48, 49, 00, 00, 00, 00,
-	      A0, 0D, 06, 49, 43, A5, 64, 4C, AD,
-	      A0, 0D, 06, 49, 40, 05, 77, 33, 3D,
-	      A0, 0D, 06, 49, 4A, 00, 00, 00, 00,
-	      A0, 0D, 06, 49, 49, 00, 00, 00, 00
-}
-
-NXP_RF_CONF_BLK_9={
-		  20, 02, FA, 1C,
-	      A0, 0D, 06, 4A, 8B, 48, 02, F0, 80,
-	      A0, 0D, 06, 4A, 43, A5, 64, 4C, AD,
-	      A0, 0D, 06, 4A, 40, 05, 77, 33, 3D,
-	      A0, 0D, 06, 4A, 4A, 00, 00, 00, 00,
-	      A0, 0D, 06, 4A, 49, 00, 00, 00, 00,
-	      A0, 0D, 06, 4B, 43, A5, 64, 4C, 6D,
-	      A0, 0D, 06, 4C, 44, 00, 34, 52, 01,
-	      A0, 0D, 06, 4C, 4A, 00, 00, 00, 00,
-	      A0, 0D, 06, 4C, 49, 00, 00, 00, 00,
-	      A0, 0D, 06, 4C, 40, 85, 51, 33, 3D,
-	      A0, 0D, 06, 4D, 44, 00, 34, 52, 01,
-	      A0, 0D, 06, 4D, 4A, 00, 00, 00, 00,
-	      A0, 0D, 06, 4D, 49, 00, 00, 00, 00,
-	      A0, 0D, 06, 4D, 40, 85, 51, 33, 3D,
-	      A0, 0D, 06, 4E, 45, 31, 12, 00, 00,
-	      A0, 0D, 03, 4E, 7C, 50,
-	      A0, 0D, 06, 4E, 8D, 00, 00, 00, 06,
-	      A0, 0D, 06, 4E, 8B, 00, A2, 24, 00,
-	      A0, 0D, 06, 4E, 89, 7D, 84, 05, 08,
-	      A0, 0D, 06, 4E, 44, 00, B0, 66, 01,
-	      A0, 0D, 06, 4E, 43, A5, 64, 5C, AD,
-	      A0, 0D, 06, 4E, 41, FD, FF, 5F, F0,
-	      A0, 0D, 06, 4E, 40, 07, 77, 33, 3D,
-	      A0, 0D, 06, 4F, 4A, 2A, 8E, 8D, 2A,
-	      A0, 0D, 06, 4F, 49, 5D, 27, 27, 00,
-	      A0, 0D, 06, 60, 4E, FF, FF, FF, 01,
-	      A0, 0D, 06, 60, 4F, FF, FF, FF, 01,
-	      A0, 0D, 06, 60, 50, FF, FF, FF, 3F
-}
-
-NXP_RF_CONF_BLK_10={
-		  20, 02, FD, 1C,
-	      A0, 0D, 06, 80, 7D, A0, 00, 96, BF,
-	      A0, 0D, 06, 80, 80, 42, 00, 04, 00,
-	      A0, 0D, 06, 80, C9, 30, 00, 00, 00,
-	      A0, 0D, 06, 8C, 80, 41, 00, 04, 00,
-	      A0, 0D, 06, 90, 4F, FF, FF, F0, 01,
-	      A0, 0D, 06, 90, 4E, FF, FF, F0, 01,
-	      A0, 0D, 06, 90, 39, 3F, 00, 00, 61,
-	      A0, 0D, 06, 9B, A9, 84, 00, 00, 00,
-	      A0, 0D, 06, 9B, A1, 7F, 7F, 7F, 7F,
-	      A0, 0D, 06, 9B, 99, 7F, 7F, 7F, 7F,
-	      A0, 0D, 06, 9B, 95, FF, 00, 0F, 00,
-	      A0, 0D, 06, 9B, A5, 7F, 7F, 7F, 7F,
-	      A0, 0D, 06, 9B, 9D, 7F, 7F, 7F, 7F,
-	      A0, 0D, 06, 9B, 97, FF, 00, 0F, 00,
-	      A0, 0D, 06, 9B, 4F, FF, FF, FF, 01,
-	      A0, 0D, 06, 9B, 4E, FF, FF, FF, 01,
-	      A0, 0D, 06, 91, D4, F8, 84, EF, 03,
-	      A0, 0D, 06, 91, D2, 4A, 4A, 4B, 38,
-	      A0, 0D, 06, 9C, A9, 84, 00, 00, 00,
-	      A0, 0D, 06, 9C, A1, 7F, 22, 5F, 00,
-	      A0, 0D, 06, 9C, 99, 7F, 22, 7F, 7F,
-	      A0, 0D, 06, 9C, 95, FF, 00, 0F, 00,
-	      A0, 0D, 06, 9C, A5, 7F, 22, 5F, 00,
-	      A0, 0D, 06, 9C, 9D, 7F, 22, 7F, 7F,
-	      A0, 0D, 06, 9C, 97, FF, 00, 0F, 00,
-	      A0, 0D, 06, 9C, 4F, 9F, 88, FF, 01,
-	      A0, 0D, 06, 9C, 4E, 9F, 88, FF, 01,
-	      A0, 0D, 06, 95, D4, F8, 84, 75, 00
-}
-
-NXP_RF_CONF_BLK_11={
-		  20, 02, EC, 12,
-	      A0, 0D, 06, 95, D2, 4A, 4B, 4B, 58,
-	      A0, 0D, 06, 9D, A9, 84, 00, 00, 00,
-	      A0, 0D, 06, 9D, A1, 7F, 7F, 7F, 7F,
-	      A0, 0D, 06, 9D, 99, 7F, 7F, 7F, 7F,
-	      A0, 0D, 06, 9D, 95, FF, 00, 0F, 00,
-	      A0, 0D, 06, 9D, A5, 7F, 7F, 7F, 7F,
-	      A0, 0D, 06, 9D, 9D, 7F, 7F, 7F, 7F,
-	      A0, 0D, 06, 9D, 97, FF, 00, 0F, 00,
-	      A0, 0D, 06, 9D, 4F, FF, FF, FF, 01,
-	      A0, 0D, 06, 9D, 4E, FF, FF, FF, 01,
-	      A0, 0D, 06, 99, D4, F8, 04, E4, 01,
-	      A0, 0D, 06, 99, D2, 4A, 4B, 4B, 48,
-	      A0, AF, 09, 11, 2F, 00, 23, 11, 2F, 00, 23, 00,
-	      A0, 92, 28, 37, 00, 1B, 00, FC, 81, 0F, 00, 22, 80, 0F, 00, 14, 00, 20, 70, EA, 01, 43, 18, 32, 16, 78, 30, 0D, 00, 03, 55, EA, 05, 01, 04, 68, 02, 3F, 92, 04, 00, 0C, 13,
-	      A0, 1F, 06, 63, 00, 42, 00, 14, 00,
-	      A0, 9A, 02, 00, 00,
-	      A0, 99, 0A, 03, 00, 80, 00, 00, 80, 00, 00, 00, 00,
-	      A0, 68, 2A, 06, 40, 60, 03, 19, 00, 00, 00, 00, 82, 04, 00, C0, 05, C0, 00, 00, 01, 00, 01, A0, 00, A0, 00, 03, FA, 00, 00, 00, 4C, 00, 14, 00, 7D, 00, 05, 7F, 00, 00, 01, 00, 03
-}
-
-NXP_RF_CONF_BLK_12={
-		  20, 02, 46, 08,
-	      A0, 0D, 03, 61, 09, 81,
-          A0, 0D, 06, 60, AB, FF, FF, 00, 00,
-          A0, 0D, 06, 60, 95, FF, FF, 0F, 00,
-          A0, 0D, 06, 60, 97, FF, FF, 0F, 00,
-	      A0, 0D, 06, 82, 82, 49, 80, 00, 00,
-	      A0, 0D, 06, 80, 82, 49, 80, 00, 00,
-	      A0, 0D, 06, 62, 32, AE, 00, 7F, 00,
-	      A0, 0D, 06, 67, 32, AE, 00, 1F, 00
-}
-NXP_RF_CONF_MAX_NUM=12

proprietary/vendor/etc/libnfc-qrd-SN100.conf

@@ -1,626 +0,0 @@
-#################### This file is used by NXP NFC NCI HAL #####################
-###############################################################################
-# Application options
-# Logging Levels
-# NXPLOG_DEFAULT_LOGLEVEL    0x01
-# ANDROID_LOG_DEBUG          0x03
-# ANDROID_LOG_WARN           0x02
-# ANDROID_LOG_ERROR          0x01
-# ANDROID_LOG_SILENT         0x00
-NXPLOG_EXTNS_LOGLEVEL=0x03
-NXPLOG_NCIHAL_LOGLEVEL=0x03
-NXPLOG_NCIX_LOGLEVEL=0x03
-NXPLOG_NCIR_LOGLEVEL=0x03
-NXPLOG_FWDNLD_LOGLEVEL=0x03
-NXPLOG_TML_LOGLEVEL=0x03
-NFC_DEBUG_ENABLED=1
-
-###############################################################################
-# Nfc Device Node name
-NXP_NFC_DEV_NODE="/dev/nq-nci"
-
-#################################################################################
-#VEN Toggle Config
-#Disable = 0x00
-#Enable  = 0x01
-ENABLE_VEN_TOGGLE=0x00
-
-###############################################################################
-# Extension for Mifare reader enable
-MIFARE_READER_ENABLE=0x01
-
-###############################################################################
-# Mifare Reader implementation
-# 0: General implementation
-# 1: Legacy implementation
-LEGACY_MIFARE_READER=0
-
-###############################################################################
-# System clock source selection configuration
-#define CLK_SRC_XTAL       1
-#define CLK_SRC_PLL        2
-NXP_SYS_CLK_SRC_SEL=0x02
-
-###############################################################################
-# System clock frequency selection configuration
-#define CLK_FREQ_13MHZ         1
-#define CLK_FREQ_19_2MHZ       2
-#define CLK_FREQ_24MHZ         3
-#define CLK_FREQ_26MHZ         4
-#define CLK_FREQ_38_4MHZ       5
-#define CLK_FREQ_52MHZ         6
-NXP_SYS_CLK_FREQ_SEL=0x02
-
-###############################################################################
-# The timeout value to be used for clock request acknowledgment
-# min value = 0x01 to max = 0x06
-#NXP_SYS_CLOCK_TO_CFG=0x06
-
-###############################################################################
-# The delay to try to start PLL/XTAL when using sys clock 256/fc units = ~18.8 us
-# min value = 0x01 to max = 0x1F
-#NXP_CLOCK_REQ_DELAY=0x16
-
-###############################################################################
-# NXP proprietary settings
-NXP_ACT_PROP_EXTN={2F, 02, 00}
-
-###############################################################################
-# NXP TVDD configurations settings
-# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported,
-# out of them only one can be configured at a time.
-NXP_EXT_TVDD_CFG=0x02
-
-###############################################################################
-#config1:SLALM, 3.3V for both RM and CM
-#NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C}
-
-###############################################################################
-#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM,
-#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms
-#NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C}
-NXP_EXT_TVDD_CFG_2={20, 02, 30, 01, A0, 0E, 2C, F0, 00, 3E, 11, E4, E4, E4, 00, 00, 00, 00, 00, A7, 8E, FF, FF, 0F, 0F, 0F, 0F, 0A, 00, 00, 00, 00, 02, 00, 00, 01, 00, 10, 00, 04, 00, 00, 00, 17, 40, 20, 07, 13, 07, 05, 13}
-
-###############################################################################
-# MAX 20 RF configuration blocks are supported by MW.
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_1={
-#}
-
-###############################################################################
-# By default, the LPCD shall be enabled.
-# Please check the platform specific configuration and enable it.
-# NXP_RF_CONF_BLK_1={
-#                    20, 02, 2E, 01,
-#                    A0, 68, 2A, 06, 40, 60, 03, 19, 00, 00, 00, 00,
-#                    83, 04,
-#                    00,
-#                    C0, 00, C0, 00,
-#                    00, 01, 00, 01,
-#                    A0, 00, A0, 00,
-#                    03, FA, 00, 00, 00, 4C, 00, 14, 00, 7D, 00,
-#                    05,
-#                    7F, 00,
-#                    00, 01,00, 03
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_2={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_3={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_4={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_5={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_6={
-#}
-
-###############################################################################
-# Set configuration optimization decision setting
-# Enable    = 0x01
-# Disable   = 0x00
-NXP_SET_CONFIG_ALWAYS=0x01
-
-###############################################################################
-# Core configuration rf field filter settings to enable set to 01 to disable set to 00 last bit
-#NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00}
-
-###############################################################################
-# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set
-# to 0x00
-#NXP_I2C_FRAGMENTATION_ENABLED=0x00
-
-###############################################################################
-# Core configuration extensions
-# It includes
-# Wired mode settings A0ED, A0EE
-# Tag Detector A040, A041, A043
-# Low Power mode A007
-# Clock settings A002, A003
-# PbF settings A008
-# Clock timeout settings A004
-# eSE (SVDD) PWR REQ settings A0F2
-# Window size A0D8
-# DWP Speed   A0D5
-# How eSE connected to PN553 A012
-# UICC2 bit rate A0D1
-# SWP1A interface A0D4
-# DWP intf behavior config, SVDD Load activated by default if set to 0x31 A037
-# Low power tag detection LPTD for power reduction A068
-NXP_CORE_CONF_EXTN={20, 02, 3E, 05,
-    A0, EC, 01, 01,
-    A0, ED, 01, 01,
-    A0, 0A, 01, 0A,
-    A0, 68, 2A, 06, 40, 60, 03, 19, 00, 00, 00, 00, 82, 04, 00, 00, 02, 00, 0F, 00, 02, 00, 0F, A0, 00, A0, 00, 03, FA, 00, 00, 00, 4C, 00, 14, 00, 7D, 00, 05, 7F, 00, 00, 01, 00, 03,
-    A0, 0A, 01, 20
-}
-#       A0, F2, 01, 01,
-#       A0, 40, 01, 01,
-#       A0, 41, 01, 02,
-#       A0, 43, 01, 04,
-#       A0, 02, 01, 01,
-#       A0, 03, 01, 11,
-#       A0, 07, 01, 03,
-#       A0, 08, 01, 01
-#       }
-
-###############################################################################
-# Core configuration settings
-NXP_CORE_CONF={ 20, 02, 37, 11,
-        28, 01, 00,
-        21, 01, 00,
-        30, 01, 08,
-        31, 01, 03,
-        32, 01, 60,
-        38, 01, 01,
-        33, 04, 01, 02, 03, 04,
-        54, 01, 06,
-        50, 01, 02,
-        5B, 01, 00,
-        3E, 01, 00,
-        80, 01, 01,
-        81, 01, 01,
-        82, 01, 0E,
-        18, 01, 01,
-        68, 01, 01,
-        85, 01, 01
-        }
-
-###############################################################################
-#set autonomous mode
-# disable autonomous 0x00
-# enable autonomous  0x01
-NXP_AUTONOMOUS_ENABLE=0x00
-###############################################################################
-#set Guard Timer
-# Gurad Timer range to 0x0F-0xFF(i.e.15-255 seconds)
-NXP_GUARD_TIMER_VALUE=0x0F
-###############################################################################
-#Enable SWP full power mode when phone is power off
-#NXP_SWP_FULL_PWR_ON=0x00
-
-################################################################################
-#This is used to configure UICC2 at boot time.
-# UICC2              0x03
-NXP_DEFAULT_UICC2_SELECT=0x03
-###############################################################################
-# CE when Screen state is locked
-# This setting is for DEFAULT_AID_ROUTE,
-# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE
-# Disable           0x00
-# Enable            0x01
-NXP_CE_ROUTE_STRICT_DISABLE=0x01
-
-###############################################################################
-#SCR Read Tag Operation Timeout in secs
-NXP_SWP_RD_TAG_OP_TIMEOUT=20
-
-###############################################################################
-#Set the default AID route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_AID_ROUTE=0x01
-
-###############################################################################
-#Set the ISODEP (Mifare Desfire) route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_ISODEP_ROUTE=0x01
-
-###############################################################################
-#Set the Mifare CLT route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_MIFARE_CLT_ROUTE=0x01
-
-###############################################################################
-#Set the Felica CLT route Location :
-#This settings will be used when application does not set this parameter
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_FELICA_CLT_ROUTE=0x01
-
-###############################################################################
-#Set the default AID Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_AID_PWR_STATE=0x39
-
-###############################################################################
-#Set the Mifare Desfire Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_DESFIRE_PWR_STATE=0x3B
-
-###############################################################################
-#Set the Mifare CLT Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_MIFARE_CLT_PWR_STATE=0x3B
-
-###############################################################################
-#Set the Felica CLT Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_FELICA_CLT_PWR_STATE=0x3B
-###############################################################################
-#Set the T4TNfcee AID Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_T4TNFCEE_AID_POWER_STATE=0x3B
-
-###############################################################################
-#Set the default Felica T3T System Code OffHost route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_SYS_CODE_ROUTE=0x00
-###############################################################################
-# AID Matching platform options
-# AID_MATCHING_L 0x01
-# AID_MATCHING_K 0x02
-#AID_MATCHING_PLATFORM=0x01
-###############################################################################
-# P61 interface options
-# SPI 0x02
-NXP_P61_LS_DEFAULT_INTERFACE=0x00
-
-###############################################################################
-#CHINA_TIANJIN_RF_SETTING
-#Enable  0x01
-#Disable  0x00
-#NXP_CHINA_TIANJIN_RF_ENABLED=0x01
-###############################################################################
-#SWP_SWITCH_TIMEOUT_SETTING
-# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60].
-# Timeout in milliseconds, for example
-# No Timeout  0x00
-# 10 millisecond timeout 0x0A
-#NXP_SWP_SWITCH_TIMEOUT=0x0A
-###############################################################################
-# Flashing Options Configurations
-# FLASH_UPPER_VERSION 0x01
-# FLASH_DIFFERENT_VERSION 0x02
-# FLASH_ALWAYS 0x03
-NXP_FLASH_CONFIG=0x02
-
-###############################################################################
-# P61 interface options for JCOP Download
-# SPI 0x02
-NXP_P61_JCOP_DEFAULT_INTERFACE=0x00
-
-###############################################################################
-# Option to perform LS update every boot
-# Enable 0x01
-# Disable    0x00
-NXP_LS_FORCE_UPDATE_REQUIRED=0x00
-
-###############################################################################
-# Option to perform JCOP update every boot
-# Enable 0x01
-# Disable 0x00
-NXP_JCOP_FORCE_UPDATE_REQUIRED=0x00
-
-###############################################################################
-# Bail out mode
-#  If set to 1, NFCC is using bail out mode for either Type A or Type B poll.
-#  Set this parameter value to 1 if Android Beam is enabled, else set to 0.
-NFA_POLL_BAIL_OUT_MODE=0x00
-
-###############################################################################
-# White list of Hosts
-# This values will be the Hosts(NFCEEs) in the HCI Network.
-DEVICE_HOST_WHITE_LIST={C0, 80}
-
-###############################################################################
-# Choose the presence-check algorithm for type-4 tag.  If not defined, the default value is 1.
-# 0  NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
-# 1  NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
-# 2 NFA_RW_PRES_CHK_ISO_DEP_NAK; Type - 4 tag protocol iso-dep nak presence check
-#    command is sent waiting for rsp and ntf.
-PRESENCE_CHECK_ALGORITHM=2
-###############################################################################
-# Options to Fallback to alternative route
-# Disable           0x00
-# DH                0x01
-# ESE               0x02
-NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
-###############################################################################
-# Vendor Specific Proprietary Protocol & Discovery Configuration
-# Set to 0xFF if unsupported
-#  byte[0] NCI_PROTOCOL_18092_ACTIVE
-#  byte[1] NCI_PROTOCOL_B_PRIME
-#  byte[2] NCI_PROTOCOL_DUAL
-#  byte[3] NCI_PROTOCOL_15693
-#  byte[4] NCI_PROTOCOL_KOVIO
-#  byte[5] NCI_PROTOCOL_MIFARE
-#  byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
-#  byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
-#  byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
-NFA_PROPRIETARY_CFG={05, FF, FF, 06, 81, 80, FF, FF, FF}
-
-###############################################################################
-#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE
-#Enable/Disable block number checks for china transit use case
-#Enable  0x01
-#Disable  0x00
-#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01
-
-################################################################################
-#This flags will enable different modes of Lx Debug based on bits of the Byte0
-#Byte 0:
-# |_________Bit Mask_______|   Debug Mode
-#  b7|b6|b5|b4|b3|b2|b1|b0|
-#    |  |x |  |  |  |  |  |    Modulation Detected Notification
-#    |  |  |X |  |  |  |  |    Enable L1 Events (ISO14443-4, ISO18092)
-#    |  |  |  |X |  |  |  |    Enable L2 Reader Events(ROW specific)
-#    |  |  |  |  |X |  |  |    Enable Felica SystemCode
-#    |  |  |  |  |  |X |  |    Enable Felica RF (all Felica CM events)
-#    |  |  |  |  |  |  |X |    Enable L2 Events CE (ISO14443-3, RF Field ON/OFF)
-#Byte 1: RFU, shall always be 0x00
-#                              Byte1    Byte0
-#                                  \__ __/
-# e.g. NXP_CORE_PROP_SYSTEM_DEBUG=0x0031 ==> Modulation detected, L1, L2 CE
-NXP_CORE_PROP_SYSTEM_DEBUG=0x0000
-
-###############################################################################
-#Enable NXP NCI runtime parser library
-#Enable 0x01
-#Disable 0x00
-NXP_NCI_PARSER_LIBRARY=0x00
-
-###############################################################################
-# Timeout value in milliseconds for JCOP OS download to complete
-OS_DOWNLOAD_TIMEOUT_VALUE=60000
-
-###############################################################################
-# Forcing HOST to listen for a selected protocol
-# 0x00 : Disable Host Listen
-# 0x01 : Enable Host to Listen (A)  for ISO-DEP tech A
-# 0x02 : Enable Host to Listen (B)  for ISO-DEP tech B
-# 0x04 : Enable Host to Listen (F)  for T3T Tag Type Protocol tech F
-# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F
-HOST_LISTEN_TECH_MASK=0x07
-
-###############################################################################
-# Enable forward functionality
-# Disable           0x00
-# Enable            0x01 //Any positive value as per below bit configuration
-# HOST power states when type A/B only UICC present
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-FORWARD_FUNCTIONALITY_ENABLE=0x01
-
-###############################################################################
-# Configure the NFC Extras to open and use a static pipe.  If the value is
-# not set or set to 0, then the default is use a dynamic pipe based on a
-# destination gate (see NFA_HCI_DEFAULT_DEST_GATE).  Note there is a value
-# for each EE (ESE/SIM1/SIM2)
-OFF_HOST_ESE_PIPE_ID=0x16
-OFF_HOST_SIM_PIPE_ID=0x0A
-OFF_HOST_SIM2_PIPE_ID=0x23
-
-###############################################################################
-#Set the Felica T3T System Code Power state :
-#This settings will be used when application does not set this parameter
-#Update Power state as per NCI2.0
-DEFAULT_SYS_CODE_PWR_STATE=0x00
-###############################################################################
-#Default Secure Element route id
-DEFAULT_OFFHOST_ROUTE=0x01
-
-###############################################################################
-#Maximum SMB transceive wait for response
-NXP_SMB_TRANSCEIVE_TIMEOUT=2000
-###############################################################################
-# Firmware file type
-#.so file   0x01
-#.bin file  0x02
-NXP_FW_TYPE=0x01
-############################################################################
-# Extended APDU length for ISO_DEP
-ISO_DEP_MAX_TRANSCEIVE=0xFEFF
-#########################################################################
-# Support for Amendment I SEMS specification
-# Support SEMS Amendment I 0x01
-# Support NXP LS client    0x00
-NXP_GP_AMD_I_SEMS_SUPPORTED=0x01
-
-###############################################################################
-#All eSE terminals shall be match with the  /vendor/etc/vintf/manifest.xml file
-#under android.hardware.secure_element
-# The terminal name shall start from 1
-# Assign terminal number to each interface based on system config
-NXP_SPI_SE_TERMINAL_NUM="eSE1"
-###############################################################################
-# Assign terminal number to each interface based on system config
-#NXP_VISO_SE_TERMINAL_NUM="eSE3"
-###############################################################################
-# Assign terminal number to each interface based on system config
-NXP_NFC_SE_TERMINAL_NUM="eSE2"
-###############################################################################
-#For static or dynamic dual UICC feature support
-#Enable static dual uicc feature by setting value 0x00
-#Enable dynamic dual uicc feature by setting value 0x01
-NXP_DUAL_UICC_ENABLE=0x01
-###############################################################################
-# Time to wait by DH when NFCC will report eSE Cold Temp Error.
-# The value is as per the UM and in seconds
-NXP_SE_COLD_TEMP_ERROR_DELAY=0x05
-###############################################################################
-#OffHost ESE route location for MultiSE
-#ESE = 01
-OFFHOST_ROUTE_ESE={01}
-###############################################################################
-#OffHost UICC route location for MultiSE
-#UICC1 = 02
-#UICC2 = 03
-OFFHOST_ROUTE_UICC={02:03}
-
-###############################################################################
-#T4T NFCEE ENABLE
-#bit pos 0 = T4T NFCEE Enable
-#bit pos 6 = T4T NFCEE Contactless write enable
-NXP_T4T_NFCEE_ENABLE=0x01
-
-###############################################################################
-#CORE_SET_CONF_CMD to reset Prop Emvco Flag
-NXP_PROP_RESET_EMVCO_CMD={20, 02, 05, 01, A0, 44, 01, 00}
-
-###############################################################################
-#Guard time in ms for the mPOS/SCR module to process the reader start/stop req
-NXP_RDR_REQ_GUARD_TIME=0
-
-###############################################################################
-#MW workaround to enable LPCD when EMVCO polling mode starts and disable
-#while switching back to NFC Forum mode
-# 0 --> Disable MW workaround
-# 1 --> Enable MW workaround
-# 2 --> Use this option only for FW versions below 1.10.52
-NXP_RDR_DISABLE_ENABLE_LPCD=0
-
-###############################################################################
-# Firmware patch format, Only 1 and 5 should be set
-#   0 -> NFC Default
-#   1 -> EMVCO Default
-#   3 -> EMVCO Polling, DISC_IDLE = POWER_OFF, DISC DEACTIVATE =  Removal process
-#   5 -> EMVCO Cert Polling, DISC_IDLE = Removal process  , DISC DEACTIVATE =   POWER_OFF
-#   7 -> EMVCO Polling, DISC_IDLE = POWER_OFF, DISC DEACTIVATE =  POWER_OFF
-NFA_CONFIG_FORMAT=1
-
-#################################################################################
-# Enable disconnect tag in screen off
-# Disable           0x00
-# Enable            0x01
-NXP_DISCONNECT_TAG_IN_SCRN_OFF=0x01
-#################################################################################
-
-###############################################################################
-# Enable(0x01) or disable(0x00) non-standard tag reading
-# Disable Non-standard card read         0x00
-# Enable Non-standard card read          0x01
-NXP_SUPPORT_NON_STD_CARD=0x00
-#################################################################################
-# Enable(0x01) or disable(0x00 ) for getting HW Info log over SMB wired
-# Disable getting HW info log            0x00
-# Enable getting HW info log             0x01
-NXP_GET_HW_INFO_LOG=0x00
-#################################################################################
-# Enable(0x01) or disable(0x00) iso dep sak merge
-# Disable SAK merging         0x00
-# Enable SAK merging          0x01
-NXP_ISO_DEP_MERGE_SAK=0x01
-#################################################################################
-# Valid time difference range within for non-standard tag detection from first
-# Activation fail to next discovery
-# Note :- 1. This will take effect only when NXP_SUPPORT_NON_STD_CARD is enabled
-#         2. The number will be multiplied by 100ms by MW.
-# Default:
-# Set to 00 if not supported
-#  byte[0] MIFARE_CLASSIC 100ms
-#  byte[1] ISO_DEP        300ms
-NXP_NON_STD_CARD_TIMEDIFF={01, 03}
-#################################################################################
-# Enable or Disable UICC ETSI support
-# Disable UICC ETSI support         0
-# Enable UICC ETSI support          1
-NXP_UICC_ETSI_SUPPORT=0
-#################################################################################
-# Minimal FW Version used for recovery
-NXP_MINIMAL_FW_VERSION=0x110DE
-#################################################################################
-# Enable Stop/Start of RF discovery for NFCEE recovery
-# Disable RF Restart for NFCEE recovery   0
-# Enable RF Restart for NFCEE recovery    1
-NXP_RESTART_RF_FOR_NFCEE_RECOVERY=0
-#################################################################################
-#Tag Presence check timeout in millisecond.
-NXP_PRESENCE_CHECK_TIMEOUT = 375
-#################################################################################
-# Enable or Disable the minimal FW recovery support.
-# This logic will get enabled on early NFC hal boot.
-# Disable NFCC RECOVERY support          0x00
-# Enable  NFCC RECOVERY support          0x01
-NXP_NFCC_RECOVERY_SUPPORT=0x01
-#################################################################################

proprietary/vendor/etc/libnfc-qrd-SN100_38_4MHZ.conf

@@ -1,627 +0,0 @@
-#################### This file is used by NXP NFC NCI HAL #####################
-###############################################################################
-# Application options
-# Logging Levels
-# NXPLOG_DEFAULT_LOGLEVEL    0x01
-# ANDROID_LOG_DEBUG          0x03
-# ANDROID_LOG_WARN           0x02
-# ANDROID_LOG_ERROR          0x01
-# ANDROID_LOG_SILENT         0x00
-NXPLOG_EXTNS_LOGLEVEL=0x03
-NXPLOG_NCIHAL_LOGLEVEL=0x03
-NXPLOG_NCIX_LOGLEVEL=0x03
-NXPLOG_NCIR_LOGLEVEL=0x03
-NXPLOG_FWDNLD_LOGLEVEL=0x03
-NXPLOG_TML_LOGLEVEL=0x03
-NFC_DEBUG_ENABLED=1
-
-###############################################################################
-# Nfc Device Node name
-NXP_NFC_DEV_NODE="/dev/nq-nci"
-
-#################################################################################
-#VEN Toggle Config
-#Disable = 0x00
-#Enable  = 0x01
-ENABLE_VEN_TOGGLE=0x00
-
-###############################################################################
-# Extension for Mifare reader enable
-MIFARE_READER_ENABLE=0x01
-
-###############################################################################
-# Mifare Reader implementation
-# 0: General implementation
-# 1: Legacy implementation
-LEGACY_MIFARE_READER=0
-
-###############################################################################
-# System clock source selection configuration
-#define CLK_SRC_XTAL       1
-#define CLK_SRC_PLL        2
-NXP_SYS_CLK_SRC_SEL=0x02
-
-###############################################################################
-# System clock frequency selection configuration
-#define CLK_FREQ_13MHZ         1
-#define CLK_FREQ_19_2MHZ       2
-#define CLK_FREQ_24MHZ         3
-#define CLK_FREQ_26MHZ         4
-#define CLK_FREQ_32MHZ         5
-#define CLK_FREQ_38_4MHZ       6
-#define CLK_FREQ_52MHZ         7
-NXP_SYS_CLK_FREQ_SEL=0x06
-
-###############################################################################
-# The timeout value to be used for clock request acknowledgment
-# min value = 0x01 to max = 0x06
-#NXP_SYS_CLOCK_TO_CFG=0x06
-
-###############################################################################
-# The delay to try to start PLL/XTAL when using sys clock 256/fc units = ~18.8 us
-# min value = 0x01 to max = 0x1F
-#NXP_CLOCK_REQ_DELAY=0x16
-
-###############################################################################
-# NXP proprietary settings
-NXP_ACT_PROP_EXTN={2F, 02, 00}
-
-###############################################################################
-# NXP TVDD configurations settings
-# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported,
-# out of them only one can be configured at a time.
-NXP_EXT_TVDD_CFG=0x02
-
-###############################################################################
-#config1:SLALM, 3.3V for both RM and CM
-#NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C}
-
-###############################################################################
-#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM,
-#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms
-#NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C}
-NXP_EXT_TVDD_CFG_2={20, 02, 30, 01, A0, 0E, 2C, F0, 00, 3E, 11, E4, E4, E4, 00, 00, 00, 00, 00, A7, 8E, FF, FF, 0F, 0F, 0F, 0F, 0A, 00, 00, 00, 00, 02, 00, 00, 01, 00, 10, 00, 04, 00, 00, 00, 17, 40, 20, 07, 13, 07, 05, 13}
-
-###############################################################################
-# MAX 20 RF configuration blocks are supported by MW.
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_1={
-#}
-
-###############################################################################
-# By default, the LPCD shall be enabled.
-# Please check the platform specific configuration and enable it.
-# NXP_RF_CONF_BLK_1={
-#                    20, 02, 2E, 01,
-#                    A0, 68, 2A, 06, 40, 60, 03, 19, 00, 00, 00, 00,
-#                    83, 04,
-#                    00,
-#                    C0, 00, C0, 00,
-#                    00, 01, 00, 01,
-#                    A0, 00, A0, 00,
-#                    03, FA, 00, 00, 00, 4C, 00, 14, 00, 7D, 00,
-#                    05,
-#                    7F, 00,
-#                    00, 01,00, 03
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_2={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_3={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_4={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_5={
-#}
-
-###############################################################################
-# NXP RF configuration ALM/PLM settings
-# This section needs to be updated with the correct values based on the platform
-#NXP_RF_CONF_BLK_6={
-#}
-
-###############################################################################
-# Set configuration optimization decision setting
-# Enable    = 0x01
-# Disable   = 0x00
-NXP_SET_CONFIG_ALWAYS=0x01
-
-###############################################################################
-# Core configuration rf field filter settings to enable set to 01 to disable set to 00 last bit
-#NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00}
-
-###############################################################################
-# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set
-# to 0x00
-#NXP_I2C_FRAGMENTATION_ENABLED=0x00
-
-###############################################################################
-# Core configuration extensions
-# It includes
-# Wired mode settings A0ED, A0EE
-# Tag Detector A040, A041, A043
-# Low Power mode A007
-# Clock settings A002, A003
-# PbF settings A008
-# Clock timeout settings A004
-# eSE (SVDD) PWR REQ settings A0F2
-# Window size A0D8
-# DWP Speed   A0D5
-# How eSE connected to PN553 A012
-# UICC2 bit rate A0D1
-# SWP1A interface A0D4
-# DWP intf behavior config, SVDD Load activated by default if set to 0x31 A037
-# Low power tag detection LPTD for power reduction A068
-NXP_CORE_CONF_EXTN={20, 02, 3E, 05,
-    A0, EC, 01, 01,
-    A0, ED, 01, 01,
-    A0, 0A, 01, 0A,
-    A0, 68, 2A, 06, 40, 60, 03, 19, 00, 00, 00, 00, 82, 04, 00, 00, 02, 00, 0F, 00, 02, 00, 0F, A0, 00, A0, 00, 03, FA, 00, 00, 00, 4C, 00, 14, 00, 7D, 00, 05, 7F, 00, 00, 01, 00, 03,
-    A0, 0A, 01, 20
-}
-#       A0, F2, 01, 01,
-#       A0, 40, 01, 01,
-#       A0, 41, 01, 02,
-#       A0, 43, 01, 04,
-#       A0, 02, 01, 01,
-#       A0, 03, 01, 11,
-#       A0, 07, 01, 03,
-#       A0, 08, 01, 01
-#       }
-
-###############################################################################
-# Core configuration settings
-NXP_CORE_CONF={ 20, 02, 37, 11,
-        28, 01, 00,
-        21, 01, 00,
-        30, 01, 08,
-        31, 01, 03,
-        32, 01, 60,
-        38, 01, 01,
-        33, 04, 01, 02, 03, 04,
-        54, 01, 06,
-        50, 01, 02,
-        5B, 01, 00,
-        3E, 01, 00,
-        80, 01, 01,
-        81, 01, 01,
-        82, 01, 0E,
-        18, 01, 01,
-        68, 01, 01,
-        85, 01, 01
-        }
-
-###############################################################################
-#set autonomous mode
-# disable autonomous 0x00
-# enable autonomous  0x01
-NXP_AUTONOMOUS_ENABLE=0x00
-###############################################################################
-#set Guard Timer
-# Gurad Timer range to 0x0F-0xFF(i.e.15-255 seconds)
-NXP_GUARD_TIMER_VALUE=0x0F
-###############################################################################
-#Enable SWP full power mode when phone is power off
-#NXP_SWP_FULL_PWR_ON=0x00
-
-################################################################################
-#This is used to configure UICC2 at boot time.
-# UICC2              0x03
-NXP_DEFAULT_UICC2_SELECT=0x03
-###############################################################################
-# CE when Screen state is locked
-# This setting is for DEFAULT_AID_ROUTE,
-# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE
-# Disable           0x00
-# Enable            0x01
-NXP_CE_ROUTE_STRICT_DISABLE=0x01
-
-###############################################################################
-#SCR Read Tag Operation Timeout in secs
-NXP_SWP_RD_TAG_OP_TIMEOUT=20
-
-###############################################################################
-#Set the default AID route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_AID_ROUTE=0x01
-
-###############################################################################
-#Set the ISODEP (Mifare Desfire) route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_ISODEP_ROUTE=0x01
-
-###############################################################################
-#Set the Mifare CLT route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_MIFARE_CLT_ROUTE=0x01
-
-###############################################################################
-#Set the Felica CLT route Location :
-#This settings will be used when application does not set this parameter
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_FELICA_CLT_ROUTE=0x01
-
-###############################################################################
-#Set the default AID Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_AID_PWR_STATE=0x39
-
-###############################################################################
-#Set the Mifare Desfire Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_DESFIRE_PWR_STATE=0x3B
-
-###############################################################################
-#Set the Mifare CLT Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_MIFARE_CLT_PWR_STATE=0x3B
-
-###############################################################################
-#Set the Felica CLT Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_FELICA_CLT_PWR_STATE=0x3B
-###############################################################################
-#Set the T4TNfcee AID Power state :
-#This settings will be used when application does not set this parameter
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-DEFAULT_T4TNFCEE_AID_POWER_STATE=0x3B
-
-###############################################################################
-#Set the default Felica T3T System Code OffHost route Location :
-#This settings will be used when application does not set this parameter
-# host  0x00
-# eSE   0x01
-# UICC  0x02
-# UICC2 0x03
-DEFAULT_SYS_CODE_ROUTE=0x00
-###############################################################################
-# AID Matching platform options
-# AID_MATCHING_L 0x01
-# AID_MATCHING_K 0x02
-#AID_MATCHING_PLATFORM=0x01
-###############################################################################
-# P61 interface options
-# SPI 0x02
-NXP_P61_LS_DEFAULT_INTERFACE=0x00
-
-###############################################################################
-#CHINA_TIANJIN_RF_SETTING
-#Enable  0x01
-#Disable  0x00
-#NXP_CHINA_TIANJIN_RF_ENABLED=0x01
-###############################################################################
-#SWP_SWITCH_TIMEOUT_SETTING
-# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60].
-# Timeout in milliseconds, for example
-# No Timeout  0x00
-# 10 millisecond timeout 0x0A
-#NXP_SWP_SWITCH_TIMEOUT=0x0A
-###############################################################################
-# Flashing Options Configurations
-# FLASH_UPPER_VERSION 0x01
-# FLASH_DIFFERENT_VERSION 0x02
-# FLASH_ALWAYS 0x03
-NXP_FLASH_CONFIG=0x02
-
-###############################################################################
-# P61 interface options for JCOP Download
-# SPI 0x02
-NXP_P61_JCOP_DEFAULT_INTERFACE=0x00
-
-###############################################################################
-# Option to perform LS update every boot
-# Enable 0x01
-# Disable    0x00
-NXP_LS_FORCE_UPDATE_REQUIRED=0x00
-
-###############################################################################
-# Option to perform JCOP update every boot
-# Enable 0x01
-# Disable 0x00
-NXP_JCOP_FORCE_UPDATE_REQUIRED=0x00
-
-###############################################################################
-# Bail out mode
-#  If set to 1, NFCC is using bail out mode for either Type A or Type B poll.
-#  Set this parameter value to 1 if Android Beam is enabled, else set to 0.
-NFA_POLL_BAIL_OUT_MODE=0x00
-
-###############################################################################
-# White list of Hosts
-# This values will be the Hosts(NFCEEs) in the HCI Network.
-DEVICE_HOST_WHITE_LIST={C0, 80}
-
-###############################################################################
-# Choose the presence-check algorithm for type-4 tag.  If not defined, the default value is 1.
-# 0  NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
-# 1  NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
-# 2 NFA_RW_PRES_CHK_ISO_DEP_NAK; Type - 4 tag protocol iso-dep nak presence check
-#    command is sent waiting for rsp and ntf.
-PRESENCE_CHECK_ALGORITHM=2
-###############################################################################
-# Options to Fallback to alternative route
-# Disable           0x00
-# DH                0x01
-# ESE               0x02
-NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
-###############################################################################
-# Vendor Specific Proprietary Protocol & Discovery Configuration
-# Set to 0xFF if unsupported
-#  byte[0] NCI_PROTOCOL_18092_ACTIVE
-#  byte[1] NCI_PROTOCOL_B_PRIME
-#  byte[2] NCI_PROTOCOL_DUAL
-#  byte[3] NCI_PROTOCOL_15693
-#  byte[4] NCI_PROTOCOL_KOVIO
-#  byte[5] NCI_PROTOCOL_MIFARE
-#  byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
-#  byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
-#  byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
-NFA_PROPRIETARY_CFG={05, FF, FF, 06, 81, 80, FF, FF, FF}
-
-###############################################################################
-#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE
-#Enable/Disable block number checks for china transit use case
-#Enable  0x01
-#Disable  0x00
-#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01
-
-################################################################################
-#This flags will enable different modes of Lx Debug based on bits of the Byte0
-#Byte 0:
-# |_________Bit Mask_______|   Debug Mode
-#  b7|b6|b5|b4|b3|b2|b1|b0|
-#    |  |x |  |  |  |  |  |    Modulation Detected Notification
-#    |  |  |X |  |  |  |  |    Enable L1 Events (ISO14443-4, ISO18092)
-#    |  |  |  |X |  |  |  |    Enable L2 Reader Events(ROW specific)
-#    |  |  |  |  |X |  |  |    Enable Felica SystemCode
-#    |  |  |  |  |  |X |  |    Enable Felica RF (all Felica CM events)
-#    |  |  |  |  |  |  |X |    Enable L2 Events CE (ISO14443-3, RF Field ON/OFF)
-#Byte 1: RFU, shall always be 0x00
-#                              Byte1    Byte0
-#                                  \__ __/
-# e.g. NXP_CORE_PROP_SYSTEM_DEBUG=0x0031 ==> Modulation detected, L1, L2 CE
-NXP_CORE_PROP_SYSTEM_DEBUG=0x0000
-
-###############################################################################
-#Enable NXP NCI runtime parser library
-#Enable 0x01
-#Disable 0x00
-NXP_NCI_PARSER_LIBRARY=0x00
-
-###############################################################################
-# Timeout value in milliseconds for JCOP OS download to complete
-OS_DOWNLOAD_TIMEOUT_VALUE=60000
-
-###############################################################################
-# Forcing HOST to listen for a selected protocol
-# 0x00 : Disable Host Listen
-# 0x01 : Enable Host to Listen (A)  for ISO-DEP tech A
-# 0x02 : Enable Host to Listen (B)  for ISO-DEP tech B
-# 0x04 : Enable Host to Listen (F)  for T3T Tag Type Protocol tech F
-# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F
-HOST_LISTEN_TECH_MASK=0x07
-
-###############################################################################
-# Enable forward functionality
-# Disable           0x00
-# Enable            0x01 //Any positive value as per below bit configuration
-# HOST power states when type A/B only UICC present
-# bit pos 0 = Switch On
-# bit pos 1 = Switch Off
-# bit pos 2 = Battery Off
-# bit pos 3 = Screen off unlock
-# bit pos 4 = Screen On lock
-# bit pos 5 = Screen Off lock
-FORWARD_FUNCTIONALITY_ENABLE=0x01
-
-###############################################################################
-# Configure the NFC Extras to open and use a static pipe.  If the value is
-# not set or set to 0, then the default is use a dynamic pipe based on a
-# destination gate (see NFA_HCI_DEFAULT_DEST_GATE).  Note there is a value
-# for each EE (ESE/SIM1/SIM2)
-OFF_HOST_ESE_PIPE_ID=0x16
-OFF_HOST_SIM_PIPE_ID=0x0A
-OFF_HOST_SIM2_PIPE_ID=0x23
-
-###############################################################################
-#Set the Felica T3T System Code Power state :
-#This settings will be used when application does not set this parameter
-#Update Power state as per NCI2.0
-DEFAULT_SYS_CODE_PWR_STATE=0x00
-###############################################################################
-#Default Secure Element route id
-DEFAULT_OFFHOST_ROUTE=0x01
-
-###############################################################################
-#Maximum SMB transceive wait for response
-NXP_SMB_TRANSCEIVE_TIMEOUT=2000
-###############################################################################
-# Firmware file type
-#.so file   0x01
-#.bin file  0x02
-NXP_FW_TYPE=0x01
-############################################################################
-# Extended APDU length for ISO_DEP
-ISO_DEP_MAX_TRANSCEIVE=0xFEFF
-#########################################################################
-# Support for Amendment I SEMS specification
-# Support SEMS Amendment I 0x01
-# Support NXP LS client    0x00
-NXP_GP_AMD_I_SEMS_SUPPORTED=0x01
-
-###############################################################################
-#All eSE terminals shall be match with the  /vendor/etc/vintf/manifest.xml file
-#under android.hardware.secure_element
-# The terminal name shall start from 1
-# Assign terminal number to each interface based on system config
-NXP_SPI_SE_TERMINAL_NUM="eSE1"
-###############################################################################
-# Assign terminal number to each interface based on system config
-#NXP_VISO_SE_TERMINAL_NUM="eSE3"
-###############################################################################
-# Assign terminal number to each interface based on system config
-NXP_NFC_SE_TERMINAL_NUM="eSE2"
-###############################################################################
-#For static or dynamic dual UICC feature support
-#Enable static dual uicc feature by setting value 0x00
-#Enable dynamic dual uicc feature by setting value 0x01
-NXP_DUAL_UICC_ENABLE=0x01
-###############################################################################
-# Time to wait by DH when NFCC will report eSE Cold Temp Error.
-# The value is as per the UM and in seconds
-NXP_SE_COLD_TEMP_ERROR_DELAY=0x05
-###############################################################################
-#OffHost ESE route location for MultiSE
-#ESE = 01
-OFFHOST_ROUTE_ESE={01}
-###############################################################################
-#OffHost UICC route location for MultiSE
-#UICC1 = 02
-#UICC2 = 03
-OFFHOST_ROUTE_UICC={02:03}
-
-###############################################################################
-#T4T NFCEE ENABLE
-#bit pos 0 = T4T NFCEE Enable
-#bit pos 6 = T4T NFCEE Contactless write enable
-NXP_T4T_NFCEE_ENABLE=0x01
-
-###############################################################################
-#CORE_SET_CONF_CMD to reset Prop Emvco Flag
-NXP_PROP_RESET_EMVCO_CMD={20, 02, 05, 01, A0, 44, 01, 00}
-
-###############################################################################
-#Guard time in ms for the mPOS/SCR module to process the reader start/stop req
-NXP_RDR_REQ_GUARD_TIME=0
-
-###############################################################################
-#MW workaround to enable LPCD when EMVCO polling mode starts and disable
-#while switching back to NFC Forum mode
-# 0 --> Disable MW workaround
-# 1 --> Enable MW workaround
-# 2 --> Use this option only for FW versions below 1.10.52
-NXP_RDR_DISABLE_ENABLE_LPCD=0
-
-###############################################################################
-# Firmware patch format, Only 1 and 5 should be set
-#   0 -> NFC Default
-#   1 -> EMVCO Default
-#   3 -> EMVCO Polling, DISC_IDLE = POWER_OFF, DISC DEACTIVATE =  Removal process
-#   5 -> EMVCO Cert Polling, DISC_IDLE = Removal process  , DISC DEACTIVATE =   POWER_OFF
-#   7 -> EMVCO Polling, DISC_IDLE = POWER_OFF, DISC DEACTIVATE =  POWER_OFF
-NFA_CONFIG_FORMAT=1
-
-#################################################################################
-# Enable disconnect tag in screen off
-# Disable           0x00
-# Enable            0x01
-NXP_DISCONNECT_TAG_IN_SCRN_OFF=0x01
-#################################################################################
-
-###############################################################################
-# Enable(0x01) or disable(0x00) non-standard tag reading
-# Disable Non-standard card read         0x00
-# Enable Non-standard card read          0x01
-NXP_SUPPORT_NON_STD_CARD=0x00
-#################################################################################
-# Enable(0x01) or disable(0x00 ) for getting HW Info log over SMB wired
-# Disable getting HW info log            0x00
-# Enable getting HW info log             0x01
-NXP_GET_HW_INFO_LOG=0x00
-#################################################################################
-# Enable(0x01) or disable(0x00) iso dep sak merge
-# Disable SAK merging         0x00
-# Enable SAK merging          0x01
-NXP_ISO_DEP_MERGE_SAK=0x01
-#################################################################################
-# Valid time difference range within for non-standard tag detection from first
-# Activation fail to next discovery
-# Note :- 1. This will take effect only when NXP_SUPPORT_NON_STD_CARD is enabled
-#         2. The number will be multiplied by 100ms by MW.
-# Default:
-# Set to 00 if not supported
-#  byte[0] MIFARE_CLASSIC 100ms
-#  byte[1] ISO_DEP        300ms
-NXP_NON_STD_CARD_TIMEDIFF={01, 03}
-#################################################################################
-# Enable or Disable UICC ETSI support
-# Disable UICC ETSI support         0
-# Enable UICC ETSI support          1
-NXP_UICC_ETSI_SUPPORT=0
-#################################################################################
-# Minimal FW Version used for recovery
-NXP_MINIMAL_FW_VERSION=0x110DE
-#################################################################################
-# Enable Stop/Start of RF discovery for NFCEE recovery
-# Disable RF Restart for NFCEE recovery   0
-# Enable RF Restart for NFCEE recovery    1
-NXP_RESTART_RF_FOR_NFCEE_RECOVERY=0
-#################################################################################
-#Tag Presence check timeout in millisecond.
-NXP_PRESENCE_CHECK_TIMEOUT = 375
-#################################################################################
-# Enable or Disable the minimal FW recovery support.
-# This logic will get enabled on early NFC hal boot.
-# Disable NFCC RECOVERY support          0x00
-# Enable  NFCC RECOVERY support          0x01
-NXP_NFCC_RECOVERY_SUPPORT=0x01
-#################################################################################

proprietary/vendor/etc/sn100u_bootup.pnscr

@@ -1,153 +0,0 @@
-reset 1
-interval 50
-
-#flushing i2c buffer
-send  20000100^M
-send  20000100^M 
-send  20000100^M
-
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100   
-# 60000A020020040500A4011007
-# <<CORE_RESET_NTF>> CORE_RESET_CMD received
-# NCI RF Configuration has been kept   NCI 2.0   Model ID:00 HW ID:A4 FW:01.10.07
-send 2001020000
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400   
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100^M
-# 60000A020020040500A4011007^M<<CORE_RESET_NTF>> CORE_RESET_CMD received
-#  NCI RF Configuration has been kept^MNCI 2.0^MModel ID:00 HW ID:A4 FW:01.10.07
-send 2001020000^M
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400^M
-send 2F0200^M
-# -=(NCI_PROPRIETARY_ACT_CMD)=-
-# 4F02050000010AE3
-send 2F000101^M
-# -=(CORE_SET_POWER_MODE_CMD)=- Standby Mode enabled
-# 4F000100
-
-send 220000^M
-# -=(NFCEE_DISCOVER_CMD)=-
-# 4200020003^M3 NFCEE found
-# 6200088001000103010200^M<<NFCEE_DISCOVER_NTF>> 80 disabled
-#  Host ID:02
-#  NFCC has no control of the NFCEE power supply
-# 6200088101000103018100^M<<NFCEE_DISCOVER_NTF>> 81 disabled
-#  Host ID:81
-#  NFCC has no control of the NFCEE power supply
-# 620008C00100010301C001^M<<NFCEE_DISCOVER_NTF>> C0 disabled
-#  Host ID:C0
-#  NFCC has control of the NFCEE power supply
-send 010003810201[1;35m HCI admin: get session id
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000A818046F7656673F76566[1;35m HCI admin: any ok
-# 010007810103028182C0[1;35m HCI admin: set whitelist
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100028180[1;35m HCI admin: any ok
-send 2201028001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 80
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 2201028101^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 81
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 610A06010003C08004^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Apl-IsoDep
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-send 010003810204 
-# HCI admin: get host list
-# 610A06010003C08104^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Bpl-IsoDep
-# 010004818000C0 HCI admin: any ok
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 610A06010003C08203^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Fpl-T3T
-
-send 21012400075202C0394103C03B04010300010301030001050003C03B000003C03B010003C03B02^M
-# -=(RF_SET_LISTEN_MODE_ROUTING_CMD)=-
-#  Power state: RFU | RFU | Sub3 | Sub2 | Sub1 | BatOff | SwOff | SwOn
-#  Sub1: No Screen Unlocked, Sub2: Screen Locked, Sub3: No Screen Locked
-#  AID {Blocked, Prefix} [Route:C0, Power:39, AID:*]
-#  Proto {Blocked} [Route:C0, Power:3B, Proto:IsoDep]
-#  Proto [Route:00, Power:01, Proto:T3T]
-#  Proto [Route:00, Power:01, Proto:NfcDep]
-#  Techo [Route:C0, Power:3B, Techno:A]
-#  Techo [Route:C0, Power:3B, Techno:B]
-#  Techo [Route:C0, Power:3B, Techno:F]
-# 41010100
-
-send 21030703800181018201^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  Apl Bpl Fpl
-# 41030100
-send 20090100^M
-# -=(CORE_SET_POWER_SUB_STATE_CMD)=- Screen On Unlocked
-# 40090100
-send 2103150A0001010102010301800181018201830106017001^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  App Bpp Fpp Aap Apl Bpl Fpl Aal 15693pp Koviopp
-# 41030100
-
-
-
-
-# use dwp
-send 220302C003^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply and link always On
-# 42030100
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-interval 100
-send 01000799500070000001 
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0070000001
-# 	MANAGE CHANNEL
-
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100059950019000 HCI SMX wired APDU: data exchange
-
-
-# send 010010995001A4040009A00000015141434C00^M
-# HCI SMX wired APDU: data exchange
-# 	APDU: 01A4040009A00000015141434C00
-# 	SELECT ARA-M
-
-# select ISD
-send 01000F995000A4040008A000000151000000
-# get CPLC
-send 010007995080CA9F7F00
-
-
-interval 50
-send 01000799500170800100^M
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0170800100
-# 	MANAGE CHANNEL
-
-#  600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000499509000 HCI SMX wired APDU: data exchange
-#	APDU: 9000
-#	I - Command successfully executed (OK).
-
-send 220302C001^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply always On
-# 42030100
-# 0100029961 HCI SMX wired APDU: end of APDU transfer
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-
-sleep 100000

proprietary/vendor/etc/sn100u_ese_disableIso.pnscr

@@ -1,155 +0,0 @@
-reset 1
-interval 50
-
-#flushing i2c buffer
-send  20000100^M
-send  20000100^M 
-send  20000100^M
-
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100   
-# 60000A020020040500A4011007
-# <<CORE_RESET_NTF>> CORE_RESET_CMD received
-# NCI RF Configuration has been kept   NCI 2.0   Model ID:00 HW ID:A4 FW:01.10.07
-send 2001020000
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400   
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100^M
-# 60000A020020040500A4011007^M<<CORE_RESET_NTF>> CORE_RESET_CMD received
-#  NCI RF Configuration has been kept^MNCI 2.0^MModel ID:00 HW ID:A4 FW:01.10.07
-send 2001020000^M
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400^M
-send 2F0200^M
-# -=(NCI_PROPRIETARY_ACT_CMD)=-
-# 4F02050000010AE3
-send 2F000101^M
-# -=(CORE_SET_POWER_MODE_CMD)=- Standby Mode enabled
-# 4F000100
-
-send 220000^M
-# -=(NFCEE_DISCOVER_CMD)=-
-# 4200020003^M3 NFCEE found
-# 6200088001000103010200^M<<NFCEE_DISCOVER_NTF>> 80 disabled
-#  Host ID:02
-#  NFCC has no control of the NFCEE power supply
-# 6200088101000103018100^M<<NFCEE_DISCOVER_NTF>> 81 disabled
-#  Host ID:81
-#  NFCC has no control of the NFCEE power supply
-# 620008C00100010301C001^M<<NFCEE_DISCOVER_NTF>> C0 disabled
-#  Host ID:C0
-#  NFCC has control of the NFCEE power supply
-send 010003810201[1;35m HCI admin: get session id
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000A818046F7656673F76566[1;35m HCI admin: any ok
-# 010007810103028182C0[1;35m HCI admin: set whitelist
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100028180[1;35m HCI admin: any ok
-send 2201028001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 80
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 2201028101^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 81
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 610A06010003C08004^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Apl-IsoDep
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-send 010003810204 
-# HCI admin: get host list
-# 610A06010003C08104^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Bpl-IsoDep
-# 010004818000C0 HCI admin: any ok
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 610A06010003C08203^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Fpl-T3T
-
-send 21012400075202C0394103C03B04010300010301030001050003C03B000003C03B010003C03B02^M
-# -=(RF_SET_LISTEN_MODE_ROUTING_CMD)=-
-#  Power state: RFU | RFU | Sub3 | Sub2 | Sub1 | BatOff | SwOff | SwOn
-#  Sub1: No Screen Unlocked, Sub2: Screen Locked, Sub3: No Screen Locked
-#  AID {Blocked, Prefix} [Route:C0, Power:39, AID:*]
-#  Proto {Blocked} [Route:C0, Power:3B, Proto:IsoDep]
-#  Proto [Route:00, Power:01, Proto:T3T]
-#  Proto [Route:00, Power:01, Proto:NfcDep]
-#  Techo [Route:C0, Power:3B, Techno:A]
-#  Techo [Route:C0, Power:3B, Techno:B]
-#  Techo [Route:C0, Power:3B, Techno:F]
-# 41010100
-
-send 21030703800181018201^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  Apl Bpl Fpl
-# 41030100
-send 20090100^M
-# -=(CORE_SET_POWER_SUB_STATE_CMD)=- Screen On Unlocked
-# 40090100
-send 2103150A0001010102010301800181018201830106017001^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  App Bpp Fpp Aap Apl Bpl Fpl Aal 15693pp Koviopp
-# 41030100
-
-
-
-
-# use dwp
-send 220302C003^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply and link always On
-# 42030100
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-interval 100
-send 01000799500070000001 
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0070000001
-# 	MANAGE CHANNEL
-
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100059950019000 HCI SMX wired APDU: data exchange
-
-
-# send 010010995001A4040009A00000015141434C00^M
-# HCI SMX wired APDU: data exchange
-# 	APDU: 01A4040009A00000015141434C00
-# 	SELECT ARA-M
-
-# disable ISO 
-send 010015995000A404000EA000000396545400000001400101
-send 010090995000D6000089408704FFFFFFFF81806B96AA7A3A5AA33B83C38E0150FFB8A296B1D359FD900D78A7C071CA9A53A045F9C85E0354293B383AEEBDD0EE1E9E13600459579A367079FB82E8FD3DA2847905ACB71CCEFD1804EB87FCBA60926A2B8C1CF3064AF36EE9F78CD592F627BFFCED6CAF74A35AE17535D78B9609960C42E5B853B209A47DA05634AA3D07FF998D
-send 010090995000D6000089408A04FFFFFFFF818008B6931CDF8AC56A9E6F4C46522A1B93913465AA1C933D41F11BBF98A2DCE6091DD0262C8D94FC2CD7497690F3C7ADA1A2E5CFA25760A1F0A7489366C4D9AC79BABC11D4F8BE05B3AD3AB90AC5199EEE43B03C09549A3B6BC6AFC907DAE9D8946600EEF7414219A42DD9224EC3BD353F3F407182987F3F180993CDA590F9219D
-send 010090995000D6000089400B0400000FF881807FD6CC0072CBECA0E9460F1976C1FD6F77B099DF60195FC793D69D5AE7E59AFA7D27B214FB2DCF9F6E9F036D61B8FD82F13A2F673724BB11B09BFDE1B206BE1340E0F02024E2F28C92EA69B867570809B0520260E069B55A9D49981728E640B29772A7FBF615705055D547B3FC72DCFDC28A7078BD5FF403F24138BD019D08C0
-send 010090995000D6000089400C04000000188180324FD7D93ADEC6C0661E10126A94627C868DB5F95B872FD3C0749F563CBEDA027F87164ADEC4EB4886E034FF5DBF49C35149C7DC8EA7A95CFBB18B67FE18287DDF96D7203DFD6097F93201790D014A83E2901D78F1DAFBFB6D782DF71FBF1A4E4048A68E2FB83DD14D22BE01E30019A074CC7D5C72502AB05FE260F2718A127F
-send 01008E995000D6000087404A026020818041B6E3BB9D98B4F2081B90282F6FA3F75EABEEA2AEE49E834277811F5DF4ADE53DADC8963AA24811F695579D3658D4C8E42F15634A92A0D4B5751565CBDBF8E5A045E72BDC28312D46C71A98039C0C070D4923F7C1706E002918693B9C3F01478D921E3A602838EFB79D4D1E72697E27A5671A668C806A5EA24B501192A7C3E9
-
-interval 50
-send 01000799500170800100^M
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0170800100
-# 	MANAGE CHANNEL
-
-#  600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000499509000 HCI SMX wired APDU: data exchange
-#	APDU: 9000
-#	I - Command successfully executed (OK).
-
-send 220302C001^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply always On
-# 42030100
-# 0100029961 HCI SMX wired APDU: end of APDU transfer
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-
-

proprietary/vendor/etc/sn100u_ese_disableIsoRead.pnscr

@@ -1,180 +0,0 @@
-reset 1
-interval 50
-
-#flushing i2c buffer
-send  20000100^M
-send  20000100^M 
-send  20000100^M
-
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100   
-# 60000A020020040500A4011007
-# <<CORE_RESET_NTF>> CORE_RESET_CMD received
-# NCI RF Configuration has been kept   NCI 2.0   Model ID:00 HW ID:A4 FW:01.10.07
-send 2001020000
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400   
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100^M
-# 60000A020020040500A4011007^M<<CORE_RESET_NTF>> CORE_RESET_CMD received
-#  NCI RF Configuration has been kept^MNCI 2.0^MModel ID:00 HW ID:A4 FW:01.10.07
-send 2001020000^M
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400^M
-send 2F0200^M
-# -=(NCI_PROPRIETARY_ACT_CMD)=-
-# 4F02050000010AE3
-send 2F000101^M
-# -=(CORE_SET_POWER_MODE_CMD)=- Standby Mode enabled
-# 4F000100
-
-send 220000^M
-# -=(NFCEE_DISCOVER_CMD)=-
-# 4200020003^M3 NFCEE found
-# 6200088001000103010200^M<<NFCEE_DISCOVER_NTF>> 80 disabled
-#  Host ID:02
-#  NFCC has no control of the NFCEE power supply
-# 6200088101000103018100^M<<NFCEE_DISCOVER_NTF>> 81 disabled
-#  Host ID:81
-#  NFCC has no control of the NFCEE power supply
-# 620008C00100010301C001^M<<NFCEE_DISCOVER_NTF>> C0 disabled
-#  Host ID:C0
-#  NFCC has control of the NFCEE power supply
-send 010003810201[1;35m HCI admin: get session id
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000A818046F7656673F76566[1;35m HCI admin: any ok
-# 010007810103028182C0[1;35m HCI admin: set whitelist
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100028180[1;35m HCI admin: any ok
-send 2201028001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 80
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 2201028101^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 81
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 610A06010003C08004^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Apl-IsoDep
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-send 010003810204 
-# HCI admin: get host list
-# 610A06010003C08104^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Bpl-IsoDep
-# 010004818000C0 HCI admin: any ok
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 610A06010003C08203^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Fpl-T3T
-
-send 21012400075202C0394103C03B04010300010301030001050003C03B000003C03B010003C03B02^M
-# -=(RF_SET_LISTEN_MODE_ROUTING_CMD)=-
-#  Power state: RFU | RFU | Sub3 | Sub2 | Sub1 | BatOff | SwOff | SwOn
-#  Sub1: No Screen Unlocked, Sub2: Screen Locked, Sub3: No Screen Locked
-#  AID {Blocked, Prefix} [Route:C0, Power:39, AID:*]
-#  Proto {Blocked} [Route:C0, Power:3B, Proto:IsoDep]
-#  Proto [Route:00, Power:01, Proto:T3T]
-#  Proto [Route:00, Power:01, Proto:NfcDep]
-#  Techo [Route:C0, Power:3B, Techno:A]
-#  Techo [Route:C0, Power:3B, Techno:B]
-#  Techo [Route:C0, Power:3B, Techno:F]
-# 41010100
-
-send 21030703800181018201^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  Apl Bpl Fpl
-# 41030100
-send 20090100^M
-# -=(CORE_SET_POWER_SUB_STATE_CMD)=- Screen On Unlocked
-# 40090100
-send 2103150A0001010102010301800181018201830106017001^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  App Bpp Fpp Aap Apl Bpl Fpl Aal 15693pp Koviopp
-# 41030100
-
-
-
-
-# use dwp
-send 220302C003^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply and link always On
-# 42030100
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-interval 100
-send 01000799500070000001 
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0070000001
-# 	MANAGE CHANNEL
-
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100059950019000 HCI SMX wired APDU: data exchange
-
-
-# send 010010995001A4040009A00000015141434C00^M
-# HCI SMX wired APDU: data exchange
-# 	APDU: 01A4040009A00000015141434C00
-# 	SELECT ARA-M
-
-# disable ISO 
-#send 010015995000A404000EA000000396545400000001400101
-#send 010090995000D6000089408704FFFFFFFF81806B96AA7A3A5AA33B83C38E0150FFB8A296B1D359FD900D78A7C071CA9A53A045F9C85E0354293B383AEEBDD0EE1E9E13600459579A367079FB82E8FD3DA2847905ACB71CCEFD1804EB87FCBA60926A2B8C1CF3064AF36EE9F78CD592F627BFFCED6CAF74A35AE17535D78B9609960C42E5B853B209A47DA05634AA3D07FF998D
-#send 010090995000D6000089408A04FFFFFFFF818008B6931CDF8AC56A9E6F4C46522A1B93913465AA1C933D41F11BBF98A2DCE6091DD0262C8D94FC2CD7497690F3C7ADA1A2E5CFA25760A1F0A7489366C4D9AC79BABC11D4F8BE05B3AD3AB90AC5199EEE43B03C09549A3B6BC6AFC907DAE9D8946600EEF7414219A42DD9224EC3BD353F3F407182987F3F180993CDA590F9219D
-#send 010090995000D6000089400B0400000FF881807FD6CC0072CBECA0E9460F1976C1FD6F77B099DF60195FC793D69D5AE7E59AFA7D27B214FB2DCF9F6E9F036D61B8FD82F13A2F673724BB11B09BFDE1B206BE1340E0F02024E2F28C92EA69B867570809B0520260E069B55A9D49981728E640B29772A7FBF615705055D547B3FC72DCFDC28A7078BD5FF403F24138BD019D08C0
-#send 010090995000D6000089400C04000000188180324FD7D93ADEC6C0661E10126A94627C868DB5F95B872FD3C0749F563CBEDA027F87164ADEC4EB4886E034FF5DBF49C35149C7DC8EA7A95CFBB18B67FE18287DDF96D7203DFD6097F93201790D014A83E2901D78F1DAFBFB6D782DF71FBF1A4E4048A68E2FB83DD14D22BE01E30019A074CC7D5C72502AB05FE260F2718A127F
-#send 01008E995000D6000087404A026020818041B6E3BB9D98B4F2081B90282F6FA3F75EABEEA2AEE49E834277811F5DF4ADE53DADC8963AA24811F695579D3658D4C8E42F15634A92A0D4B5751565CBDBF8E5A045E72BDC28312D46C71A98039C0C070D4923F7C1706E002918693B9C3F01478D921E3A602838EFB79D4D1E72697E27A5671A668C806A5EA24B501192A7C3E9
-
-#Read disabled ISO 
-send 010015995000A404000EA000000396545400000001400101
-#######expected value:
-#4087 - FFFFFFFF
-#408A - FFFFFFFF
-#400B - 0FF8	
-#400C - 0018
-#404A - 6020
-trigger 0100169950408704FFFFFFFF
-trigger 600603010101
-send 01008B995000B00000844087818002C4CDC258612EF4C92823A424179F9412ACBF6B58DD18FD7610B61895EDCFD1343A92472D78572F2B3145EB7CFC6612A0136C8663E80B0D891F903ACBCE5E682692A3EF7CCE5E80076569B7B87C132EFB30171FF1871FD53DCF9FF9BE9282EB6DEFCE04FEC56C4D989164916B4CB73DB4148B00B78AEF6AF86DC34082C18021
-trigger 0100169950408A04FFFFFFFF
-trigger 600603010101
-send 01008B995000B0000084408A818015D8FC35ACA5B64572AA34CBCD08470FDB36FFC34BE84647D56655BC8406FAA981B132A5380A371EC0B3DA4E843A3390C9B051F8EC80D211A8DE29C069FB54C8DEEB17A6FE503B1011B99A65BE0D42819AD204A0E216171DA5737BF30C9D4B6881BC7515507F1942A8E6EC4278368B5CDF30E6E44B577367CAB821A14527DEFC
-trigger 0100169950400B0400000FF8
-trigger 600603010101
-send 01008B995000B0000084400B81801D5343205BCAD78B0BB7437F513670DC16A36E194DD249123B14106D97B9E1E4D1FFA86FB8F9EDA919BA0BE5266E34C866B38CE75D9FB6178A52B164928A678AF686EC296B258B757303BB9E46ACA49770649B054F4F05D77C325F1168F41792570E9D6FAEE2DB5F889D8DE3CC7BFC496C6BE5E5D950C6AEBD3B3F4A427AF1FA
-trigger 0100169950400C0400000018
-trigger 600603010101
-send 01008B995000B0000084400C81807027A9702C0EB040E872180290AA2797AD6076B2D884ED92C8D0C82F339EFC3A39AA0680EAFCEE0DF155AC7070E44DEF605818C40636038E3F14D8B2E45503447C5781A9F0E2C70E8D4E1E163959721D3800A0F71CC2D87FCB2D33EFABCE28AFF1BA9914DCA02551407499C464807620A08B1CEBB678675955054F918AB03DE5
-trigger 0100149950404A026020
-trigger 600603010101
-send 01008B995000B0000084404A81804569D04AADD34CC5675FDBCF0E16A32FDA496384C80F8FD1BDEEE759C96086BBE65214B1C78CE6ED418C8A76031EDD7EC5ADE9A8EB9E7BB341E06CE9BF513C500E77497B813464883B193536B87EEDE5675548323B3DC0AB829CB5C7C420B1A2F5574B0500ADD05A9B3EB8DB2333A7154A57BE81E3247E5F032A5A0514A63DCC
-
-
-interval 50
-send 01000799500170800100^M
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0170800100
-# 	MANAGE CHANNEL
-
-#  600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000499509000 HCI SMX wired APDU: data exchange
-#	APDU: 9000
-#	I - Command successfully executed (OK).
-
-send 220302C001^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply always On
-# 42030100
-# 0100029961 HCI SMX wired APDU: end of APDU transfer
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-
-

proprietary/vendor/etc/sn100u_nfcon.pnscr

@@ -1,124 +0,0 @@
-reset 1
-interval 50
-
-#flushing i2c buffer
-send  20000100^M
-send  20000100^M 
-send  20000100^M
-
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100   
-# 60000A020020040500A4011007
-# <<CORE_RESET_NTF>> CORE_RESET_CMD received
-# NCI RF Configuration has been kept   NCI 2.0   Model ID:00 HW ID:A4 FW:01.10.07
-send 2001020000
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400   
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100^M
-# 60000A020020040500A4011007^M<<CORE_RESET_NTF>> CORE_RESET_CMD received
-#  NCI RF Configuration has been kept^MNCI 2.0^MModel ID:00 HW ID:A4 FW:01.10.07
-send 2001020000^M
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400^M
-send 2F0200^M
-# -=(NCI_PROPRIETARY_ACT_CMD)=-
-# 4F02050000010AE3
-send 2F000101^M
-# -=(CORE_SET_POWER_MODE_CMD)=- Standby Mode enabled
-# 4F000100
-
-send 220000^M
-# -=(NFCEE_DISCOVER_CMD)=-
-# 4200020003^M3 NFCEE found
-# 6200088001000103010200^M<<NFCEE_DISCOVER_NTF>> 80 disabled
-#  Host ID:02
-#  NFCC has no control of the NFCEE power supply
-# 6200088101000103018100^M<<NFCEE_DISCOVER_NTF>> 81 disabled
-#  Host ID:81
-#  NFCC has no control of the NFCEE power supply
-# 620008C00100010301C001^M<<NFCEE_DISCOVER_NTF>> C0 disabled
-#  Host ID:C0
-#  NFCC has control of the NFCEE power supply
-send 010003810201[1;35m HCI admin: get session id
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000A818046F7656673F76566[1;35m HCI admin: any ok
-# 010007810103028182C0[1;35m HCI admin: set whitelist
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100028180[1;35m HCI admin: any ok
-send 2201028001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 80
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 2201028101^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 81
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 610A06010003C08004^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Apl-IsoDep
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-send 010003810204 
-# HCI admin: get host list
-# 610A06010003C08104^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Bpl-IsoDep
-# 010004818000C0 HCI admin: any ok
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 610A06010003C08203^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Fpl-T3T
-
-send 21012400075202C0394103C03B04010300010301030001050003C03B000003C03B010003C03B02^M
-# -=(RF_SET_LISTEN_MODE_ROUTING_CMD)=-
-#  Power state: RFU | RFU | Sub3 | Sub2 | Sub1 | BatOff | SwOff | SwOn
-#  Sub1: No Screen Unlocked, Sub2: Screen Locked, Sub3: No Screen Locked
-#  AID {Blocked, Prefix} [Route:C0, Power:39, AID:*]
-#  Proto {Blocked} [Route:C0, Power:3B, Proto:IsoDep]
-#  Proto [Route:00, Power:01, Proto:T3T]
-#  Proto [Route:00, Power:01, Proto:NfcDep]
-#  Techo [Route:C0, Power:3B, Techno:A]
-#  Techo [Route:C0, Power:3B, Techno:B]
-#  Techo [Route:C0, Power:3B, Techno:F]
-# 41010100
-
-send 21030703800181018201^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  Apl Bpl Fpl
-# 41030100
-send 20090100^M
-# -=(CORE_SET_POWER_SUB_STATE_CMD)=- Screen On Unlocked
-# 40090100
-send 2103150A0001010102010301800181018201830106017001^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  App Bpp Fpp Aap Apl Bpl Fpl Aal 15693pp Koviopp
-# 41030100
-
-
-
-
-# use dwp
-send 220302C003^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply and link always On
-# 42030100
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-interval 100
-
-
-
-
-#send 220302C000^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply always On
-# 42030100
-# 0100029961 HCI SMX wired APDU: end of APDU transfer
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>

proprietary/vendor/etc/sn100u_pnx_chr.pnscr

@@ -1,10 +0,0 @@
-reset 0
-reset 1
-interval 50
-
-# core_reset_ntf
-trigger 60000A020120040501A40110
-# core_reset_rsp
-trigger 40000100
-# core reset
-send 20000101

proprietary/vendor/etc/sn100u_pnx_cui.pnscr

@@ -1,28 +0,0 @@
-reset 0
-reset 1
-interval 50
-
-# core reset
-send 20000101
-
-# core_init
-send 2001020000
-send 2F0200
-
-# RF_DISCOVER_MAP_CMD
-send 21000D04040302050303030201800180
-
-# start polling
-# App Bpp Fpp Aap Apl Bpl Fpl Aal 15693pp Koviopp
-trigger 6105
-trigger 41030100
-#send 2103150A0001010102010301800181018201830106017001
-# APP
-send 210303010001
-
-# sleep 10 seconds
-sleep 10000
-
-# deactivate_cmd(idle)
-send 21060100
-

proprietary/vendor/etc/sn100u_pnx_ese_3.pnscr

@@ -1,106 +0,0 @@
-reset 1
-interval 50
-
-#flushing i2c buffer
-send  20000100^M
-send  20000100^M 
-send  20000100^M
-
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100   
-# 60000A020020040500A4011007
-# <<CORE_RESET_NTF>> CORE_RESET_CMD received
-# NCI RF Configuration has been kept   NCI 2.0   Model ID:00 HW ID:A4 FW:01.10.07
-send 2001020000
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400   
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100^M
-# 60000A020020040500A4011007^M<<CORE_RESET_NTF>> CORE_RESET_CMD received
-#  NCI RF Configuration has been kept^MNCI 2.0^MModel ID:00 HW ID:A4 FW:01.10.07
-send 2001020000^M
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400^M
-send 2F0200^M
-# -=(NCI_PROPRIETARY_ACT_CMD)=-
-# 4F02050000010AE3
-send 2F000101^M
-# -=(CORE_SET_POWER_MODE_CMD)=- Standby Mode enabled
-# 4F000100
-
-send 220000^M
-# -=(NFCEE_DISCOVER_CMD)=-
-# 4200020003^M3 NFCEE found
-# 6200088001000103010200^M<<NFCEE_DISCOVER_NTF>> 80 disabled
-#  Host ID:02
-#  NFCC has no control of the NFCEE power supply
-# 6200088101000103018100^M<<NFCEE_DISCOVER_NTF>> 81 disabled
-#  Host ID:81
-#  NFCC has no control of the NFCEE power supply
-# 620008C00100010301C001^M<<NFCEE_DISCOVER_NTF>> C0 disabled
-#  Host ID:C0
-#  NFCC has control of the NFCEE power supply
-send 010003810201 
-# HCI admin: get session id
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000A818046F7656673F76566
-# HCI admin: any ok
-# 010007810103028182C0
-# HCI admin: set whitelist
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100028180
-# HCI admin: any ok
-#send 2201028001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 80
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-#send 2201028101^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 81
-# 42010100
-# 62010103^MOUPS! status failed
-#send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-
-send 220102C001^M
-sleep 500
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 610A06010003C08004^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Apl-IsoDep
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-send 010003810204 
-# HCI admin: get host list
-# 610A06010003C08104^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Bpl-IsoDep
-# 010004818000C0 HCI admin: any ok
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 610A06010003C08203^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Fpl-T3T
-
-send 21012400075202C0394103C03B04010300010301030001050003C03B000003C03B010003C03B02^M
-# -=(RF_SET_LISTEN_MODE_ROUTING_CMD)=-
-#  Power state: RFU | RFU | Sub3 | Sub2 | Sub1 | BatOff | SwOff | SwOn
-#  Sub1: No Screen Unlocked, Sub2: Screen Locked, Sub3: No Screen Locked
-#  AID {Blocked, Prefix} [Route:C0, Power:39, AID:*]
-#  Proto {Blocked} [Route:C0, Power:3B, Proto:IsoDep]
-#  Proto [Route:00, Power:01, Proto:T3T]
-#  Proto [Route:00, Power:01, Proto:NfcDep]
-#  Techo [Route:C0, Power:3B, Techno:A]
-#  Techo [Route:C0, Power:3B, Techno:B]
-#  Techo [Route:C0, Power:3B, Techno:F]
-# 41010100
-
-trigger 6105
-trigger 41030100
-send 210303018001
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  Apl
-# 41030100
-
-# sleep 10 seconds
-sleep 10000

proprietary/vendor/etc/sn100u_pnx_ese_aclog.pnscr

@@ -1,218 +0,0 @@
-reset 1
-interval 50
-
-#flushing i2c buffer
-send  20000100^M
-send  20000100^M 
-send  20000100^M
-
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100   
-# 60000A020020040500A4011007
-# <<CORE_RESET_NTF>> CORE_RESET_CMD received
-# NCI RF Configuration has been kept   NCI 2.0   Model ID:00 HW ID:A4 FW:01.10.07
-send 2001020000
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400   
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100^M
-# 60000A020020040500A4011007^M<<CORE_RESET_NTF>> CORE_RESET_CMD received
-#  NCI RF Configuration has been kept^MNCI 2.0^MModel ID:00 HW ID:A4 FW:01.10.07
-send 2001020000^M
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400^M
-send 2F0200^M
-# -=(NCI_PROPRIETARY_ACT_CMD)=-
-# 4F02050000010AE3
-send 2F000101^M
-# -=(CORE_SET_POWER_MODE_CMD)=- Standby Mode enabled
-# 4F000100
-
-send 220000^M
-# -=(NFCEE_DISCOVER_CMD)=-
-# 4200020003^M3 NFCEE found
-# 6200088001000103010200^M<<NFCEE_DISCOVER_NTF>> 80 disabled
-#  Host ID:02
-#  NFCC has no control of the NFCEE power supply
-# 6200088101000103018100^M<<NFCEE_DISCOVER_NTF>> 81 disabled
-#  Host ID:81
-#  NFCC has no control of the NFCEE power supply
-# 620008C00100010301C001^M<<NFCEE_DISCOVER_NTF>> C0 disabled
-#  Host ID:C0
-#  NFCC has control of the NFCEE power supply
-send 010003810201[1;35m HCI admin: get session id
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000A818046F7656673F76566[1;35m HCI admin: any ok
-# 010007810103028182C0[1;35m HCI admin: set whitelist
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100028180[1;35m HCI admin: any ok
-send 2201028001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 80
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 2201028101^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 81
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 610A06010003C08004^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Apl-IsoDep
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-send 010003810204 
-# HCI admin: get host list
-# 610A06010003C08104^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Bpl-IsoDep
-# 010004818000C0 HCI admin: any ok
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 610A06010003C08203^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Fpl-T3T
-
-send 21012400075202C0394103C03B04010300010301030001050003C03B000003C03B010003C03B02^M
-# -=(RF_SET_LISTEN_MODE_ROUTING_CMD)=-
-#  Power state: RFU | RFU | Sub3 | Sub2 | Sub1 | BatOff | SwOff | SwOn
-#  Sub1: No Screen Unlocked, Sub2: Screen Locked, Sub3: No Screen Locked
-#  AID {Blocked, Prefix} [Route:C0, Power:39, AID:*]
-#  Proto {Blocked} [Route:C0, Power:3B, Proto:IsoDep]
-#  Proto [Route:00, Power:01, Proto:T3T]
-#  Proto [Route:00, Power:01, Proto:NfcDep]
-#  Techo [Route:C0, Power:3B, Techno:A]
-#  Techo [Route:C0, Power:3B, Techno:B]
-#  Techo [Route:C0, Power:3B, Techno:F]
-# 41010100
-
-send 21030703800181018201^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  Apl Bpl Fpl
-# 41030100
-send 20090100^M
-# -=(CORE_SET_POWER_SUB_STATE_CMD)=- Screen On Unlocked
-# 40090100
-send 2103150A0001010102010301800181018201830106017001^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  App Bpp Fpp Aap Apl Bpl Fpl Aal 15693pp Koviopp
-# 41030100
-
-
-
-
-# use dwp
-send 220302C003^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply and link always On
-# 42030100
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-interval 100
-send 01000799500070000001 
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0070000001
-# 	MANAGE CHANNEL
-
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100059950019000 HCI SMX wired APDU: data exchange
-
-
-# send 010010995001A4040009A00000015141434C00^M
-# HCI SMX wired APDU: data exchange
-# 	APDU: 01A4040009A00000015141434C00
-# 	SELECT ARA-M
-
-# ESE Attributes
-# select ISD
-send 01000F995000A4040008A000000151000000
-
-# get CPLC
-# send 010007995080CA9F7F00
-
-# get Free
-# send 01000A995080CA00FE02DF2500
-
-# get Keyset
-# send 010007995080CA00E000
-
-# get Fabkey
-# send 01000A995080CA00FE02DF2300
-
-# get SN
-# send 01000A995080CA00FE02DF2100
-
-# get AC counter
-trigger 01000A9950FE04DF3C01
-trigger 600603010101
-send 01000A995080CA00FE02DF3C00
-interval 100
-
-# get AC log
-trigger 0100
-trigger 600603010101
-send 01000A995080CA00FE02DF2600
-interval 100
-
-trigger 0100
-trigger 0100
-trigger 600603010101
-send 01000A995080CA00FE02DF2600
-interval 100
-
-trigger 0100
-trigger 0100
-trigger 600603010101
-send 01000A995080CA00FE02DF2600
-interval 100
-
-trigger 0100
-trigger 0100
-trigger 600603010101
-send 01000A995080CA00FE02DF2600
-interval 100
-
-trigger 0100
-trigger 0100
-trigger 600603010101
-send 01000A995080CA00FE02DF2600
-interval 100
-
-trigger 0100
-trigger 0100
-trigger 600603010101
-send 01000A995080CA00FE02DF2600
-interval 100
-
-trigger 0100
-trigger 0100
-trigger 600603010101
-send 01000A995080CA00FE02DF2600
-interval 100
-
-trigger 0100
-trigger 600603010101
-send 01000A995080CA00FE02DF2600
-interval 100
-
-
-interval 50
-send 01000799500170800100^M
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0170800100
-# 	MANAGE CHANNEL
-
-#  600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000499509000 HCI SMX wired APDU: data exchange
-#	APDU: 9000
-#	I - Command successfully executed (OK).
-
-send 220302C001^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply always On
-# 42030100
-# 0100029961 HCI SMX wired APDU: end of APDU transfer
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>

proprietary/vendor/etc/sn100u_pnx_ese_cplc.pnscr

@@ -1,152 +0,0 @@
-reset 1
-interval 50
-
-#flushing i2c buffer
-send  20000100^M
-send  20000100^M 
-send  20000100^M
-
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100   
-# 60000A020020040500A4011007
-# <<CORE_RESET_NTF>> CORE_RESET_CMD received
-# NCI RF Configuration has been kept   NCI 2.0   Model ID:00 HW ID:A4 FW:01.10.07
-send 2001020000
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400   
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100^M
-# 60000A020020040500A4011007^M<<CORE_RESET_NTF>> CORE_RESET_CMD received
-#  NCI RF Configuration has been kept^MNCI 2.0^MModel ID:00 HW ID:A4 FW:01.10.07
-send 2001020000^M
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400^M
-send 2F0200^M
-# -=(NCI_PROPRIETARY_ACT_CMD)=-
-# 4F02050000010AE3
-send 2F000101^M
-# -=(CORE_SET_POWER_MODE_CMD)=- Standby Mode enabled
-# 4F000100
-
-send 220000^M
-# -=(NFCEE_DISCOVER_CMD)=-
-# 4200020003^M3 NFCEE found
-# 6200088001000103010200^M<<NFCEE_DISCOVER_NTF>> 80 disabled
-#  Host ID:02
-#  NFCC has no control of the NFCEE power supply
-# 6200088101000103018100^M<<NFCEE_DISCOVER_NTF>> 81 disabled
-#  Host ID:81
-#  NFCC has no control of the NFCEE power supply
-# 620008C00100010301C001^M<<NFCEE_DISCOVER_NTF>> C0 disabled
-#  Host ID:C0
-#  NFCC has control of the NFCEE power supply
-send 010003810201
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000A818046F7656673F76566[1;35m HCI admin: any ok
-# 010007810103028182C0[1;35m HCI admin: set whitelist
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100028180[1;35m HCI admin: any ok
-send 2201028001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 80
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 2201028101^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 81
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 610A06010003C08004^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Apl-IsoDep
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-send 010003810204 
-# HCI admin: get host list
-# 610A06010003C08104^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Bpl-IsoDep
-# 010004818000C0 HCI admin: any ok
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 610A06010003C08203^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Fpl-T3T
-
-send 21012400075202C0394103C03B04010300010301030001050003C03B000003C03B010003C03B02^M
-# -=(RF_SET_LISTEN_MODE_ROUTING_CMD)=-
-#  Power state: RFU | RFU | Sub3 | Sub2 | Sub1 | BatOff | SwOff | SwOn
-#  Sub1: No Screen Unlocked, Sub2: Screen Locked, Sub3: No Screen Locked
-#  AID {Blocked, Prefix} [Route:C0, Power:39, AID:*]
-#  Proto {Blocked} [Route:C0, Power:3B, Proto:IsoDep]
-#  Proto [Route:00, Power:01, Proto:T3T]
-#  Proto [Route:00, Power:01, Proto:NfcDep]
-#  Techo [Route:C0, Power:3B, Techno:A]
-#  Techo [Route:C0, Power:3B, Techno:B]
-#  Techo [Route:C0, Power:3B, Techno:F]
-# 41010100
-
-send 21030703800181018201^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  Apl Bpl Fpl
-# 41030100
-send 20090100^M
-# -=(CORE_SET_POWER_SUB_STATE_CMD)=- Screen On Unlocked
-# 40090100
-send 2103150A0001010102010301800181018201830106017001^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  App Bpp Fpp Aap Apl Bpl Fpl Aal 15693pp Koviopp
-# 41030100
-
-
-
-
-# use dwp
-send 220302C003^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply and link always On
-# 42030100
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-interval 100
-send 01000799500070000001 
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0070000001
-# 	MANAGE CHANNEL
-
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100059950019000 HCI SMX wired APDU: data exchange
-
-
-# send 010010995001A4040009A00000015141434C00^M
-# HCI SMX wired APDU: data exchange
-# 	APDU: 01A4040009A00000015141434C00
-# 	SELECT ARA-M
-
-# select ISD
-send 01000F995000A4040008A000000151000000
-# get CPLC
-trigger 01003199509F7F2A
-send 010007995080CA9F7F00
-
-
-interval 50
-send 01000799500170800100^M
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0170800100
-# 	MANAGE CHANNEL
-
-#  600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000499509000 HCI SMX wired APDU: data exchange
-#	APDU: 9000
-#	I - Command successfully executed (OK).
-
-send 220302C001^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply always On
-# 42030100
-# 0100029961 HCI SMX wired APDU: end of APDU transfer
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>

proprietary/vendor/etc/sn100u_pnx_ese_fabkey.pnscr

@@ -1,161 +0,0 @@
-reset 1
-interval 50
-
-#flushing i2c buffer
-send  20000100^M
-send  20000100^M 
-send  20000100^M
-
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100   
-# 60000A020020040500A4011007
-# <<CORE_RESET_NTF>> CORE_RESET_CMD received
-# NCI RF Configuration has been kept   NCI 2.0   Model ID:00 HW ID:A4 FW:01.10.07
-send 2001020000
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400   
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100^M
-# 60000A020020040500A4011007^M<<CORE_RESET_NTF>> CORE_RESET_CMD received
-#  NCI RF Configuration has been kept^MNCI 2.0^MModel ID:00 HW ID:A4 FW:01.10.07
-send 2001020000^M
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400^M
-send 2F0200^M
-# -=(NCI_PROPRIETARY_ACT_CMD)=-
-# 4F02050000010AE3
-send 2F000101^M
-# -=(CORE_SET_POWER_MODE_CMD)=- Standby Mode enabled
-# 4F000100
-
-send 220000^M
-# -=(NFCEE_DISCOVER_CMD)=-
-# 4200020003^M3 NFCEE found
-# 6200088001000103010200^M<<NFCEE_DISCOVER_NTF>> 80 disabled
-#  Host ID:02
-#  NFCC has no control of the NFCEE power supply
-# 6200088101000103018100^M<<NFCEE_DISCOVER_NTF>> 81 disabled
-#  Host ID:81
-#  NFCC has no control of the NFCEE power supply
-# 620008C00100010301C001^M<<NFCEE_DISCOVER_NTF>> C0 disabled
-#  Host ID:C0
-#  NFCC has control of the NFCEE power supply
-send 010003810201[1;35m HCI admin: get session id
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000A818046F7656673F76566[1;35m HCI admin: any ok
-# 010007810103028182C0[1;35m HCI admin: set whitelist
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100028180[1;35m HCI admin: any ok
-send 2201028001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 80
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 2201028101^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 81
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 610A06010003C08004^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Apl-IsoDep
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-send 010003810204 
-# HCI admin: get host list
-# 610A06010003C08104^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Bpl-IsoDep
-# 010004818000C0 HCI admin: any ok
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 610A06010003C08203^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Fpl-T3T
-
-send 21012400075202C0394103C03B04010300010301030001050003C03B000003C03B010003C03B02^M
-# -=(RF_SET_LISTEN_MODE_ROUTING_CMD)=-
-#  Power state: RFU | RFU | Sub3 | Sub2 | Sub1 | BatOff | SwOff | SwOn
-#  Sub1: No Screen Unlocked, Sub2: Screen Locked, Sub3: No Screen Locked
-#  AID {Blocked, Prefix} [Route:C0, Power:39, AID:*]
-#  Proto {Blocked} [Route:C0, Power:3B, Proto:IsoDep]
-#  Proto [Route:00, Power:01, Proto:T3T]
-#  Proto [Route:00, Power:01, Proto:NfcDep]
-#  Techo [Route:C0, Power:3B, Techno:A]
-#  Techo [Route:C0, Power:3B, Techno:B]
-#  Techo [Route:C0, Power:3B, Techno:F]
-# 41010100
-
-send 21030703800181018201^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  Apl Bpl Fpl
-# 41030100
-send 20090100^M
-# -=(CORE_SET_POWER_SUB_STATE_CMD)=- Screen On Unlocked
-# 40090100
-send 2103150A0001010102010301800181018201830106017001^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  App Bpp Fpp Aap Apl Bpl Fpl Aal 15693pp Koviopp
-# 41030100
-
-
-
-
-# use dwp
-send 220302C003^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply and link always On
-# 42030100
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-interval 100
-send 01000799500070000001 
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0070000001
-# 	MANAGE CHANNEL
-
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100059950019000 HCI SMX wired APDU: data exchange
-
-
-# send 010010995001A4040009A00000015141434C00^M
-# HCI SMX wired APDU: data exchange
-# 	APDU: 01A4040009A00000015141434C00
-# 	SELECT ARA-M
-
-# ESE Attributes
-# select ISD
-send 01000F995000A4040008A000000151000000
-
-# get CPLC
-# send 010007995080CA9F7F00
-# get Free
-# send 01000A995080CA00FE02DF2500
-# get Keyset
-# send 010007995080CA00E000
-# get Fabkey
-trigger 01000D9950FE07DF23
-trigger 600603010101
-send 01000A995080CA00FE02DF2300
-
-
-interval 50
-send 01000799500170800100^M
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0170800100
-# 	MANAGE CHANNEL
-
-#  600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000499509000 HCI SMX wired APDU: data exchange
-#	APDU: 9000
-#	I - Command successfully executed (OK).
-
-send 220302C001^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply always On
-# 42030100
-# 0100029961 HCI SMX wired APDU: end of APDU transfer
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>

proprietary/vendor/etc/sn100u_pnx_ese_free.pnscr

@@ -1,156 +0,0 @@
-reset 1
-interval 50
-
-#flushing i2c buffer
-send  20000100^M
-send  20000100^M 
-send  20000100^M
-
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100   
-# 60000A020020040500A4011007
-# <<CORE_RESET_NTF>> CORE_RESET_CMD received
-# NCI RF Configuration has been kept   NCI 2.0   Model ID:00 HW ID:A4 FW:01.10.07
-send 2001020000
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400   
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100^M
-# 60000A020020040500A4011007^M<<CORE_RESET_NTF>> CORE_RESET_CMD received
-#  NCI RF Configuration has been kept^MNCI 2.0^MModel ID:00 HW ID:A4 FW:01.10.07
-send 2001020000^M
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400^M
-send 2F0200^M
-# -=(NCI_PROPRIETARY_ACT_CMD)=-
-# 4F02050000010AE3
-send 2F000101^M
-# -=(CORE_SET_POWER_MODE_CMD)=- Standby Mode enabled
-# 4F000100
-
-send 220000^M
-# -=(NFCEE_DISCOVER_CMD)=-
-# 4200020003^M3 NFCEE found
-# 6200088001000103010200^M<<NFCEE_DISCOVER_NTF>> 80 disabled
-#  Host ID:02
-#  NFCC has no control of the NFCEE power supply
-# 6200088101000103018100^M<<NFCEE_DISCOVER_NTF>> 81 disabled
-#  Host ID:81
-#  NFCC has no control of the NFCEE power supply
-# 620008C00100010301C001^M<<NFCEE_DISCOVER_NTF>> C0 disabled
-#  Host ID:C0
-#  NFCC has control of the NFCEE power supply
-send 010003810201[1;35m HCI admin: get session id
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000A818046F7656673F76566[1;35m HCI admin: any ok
-# 010007810103028182C0[1;35m HCI admin: set whitelist
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100028180[1;35m HCI admin: any ok
-send 2201028001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 80
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 2201028101^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 81
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 610A06010003C08004^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Apl-IsoDep
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-send 010003810204 
-# HCI admin: get host list
-# 610A06010003C08104^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Bpl-IsoDep
-# 010004818000C0 HCI admin: any ok
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 610A06010003C08203^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Fpl-T3T
-
-send 21012400075202C0394103C03B04010300010301030001050003C03B000003C03B010003C03B02^M
-# -=(RF_SET_LISTEN_MODE_ROUTING_CMD)=-
-#  Power state: RFU | RFU | Sub3 | Sub2 | Sub1 | BatOff | SwOff | SwOn
-#  Sub1: No Screen Unlocked, Sub2: Screen Locked, Sub3: No Screen Locked
-#  AID {Blocked, Prefix} [Route:C0, Power:39, AID:*]
-#  Proto {Blocked} [Route:C0, Power:3B, Proto:IsoDep]
-#  Proto [Route:00, Power:01, Proto:T3T]
-#  Proto [Route:00, Power:01, Proto:NfcDep]
-#  Techo [Route:C0, Power:3B, Techno:A]
-#  Techo [Route:C0, Power:3B, Techno:B]
-#  Techo [Route:C0, Power:3B, Techno:F]
-# 41010100
-
-send 21030703800181018201^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  Apl Bpl Fpl
-# 41030100
-send 20090100^M
-# -=(CORE_SET_POWER_SUB_STATE_CMD)=- Screen On Unlocked
-# 40090100
-send 2103150A0001010102010301800181018201830106017001^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  App Bpp Fpp Aap Apl Bpl Fpl Aal 15693pp Koviopp
-# 41030100
-
-
-
-
-# use dwp
-send 220302C003^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply and link always On
-# 42030100
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-interval 100
-send 01000799500070000001 
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0070000001
-# 	MANAGE CHANNEL
-
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100059950019000 HCI SMX wired APDU: data exchange
-
-
-# send 010010995001A4040009A00000015141434C00^M
-# HCI SMX wired APDU: data exchange
-# 	APDU: 01A4040009A00000015141434C00
-# 	SELECT ARA-M
-
-# ESE Attributes
-# select ISD
-send 01000F995000A4040008A000000151000000
-# get CPLC
-# send 010007995080CA9F7F00
-# get Free
-trigger 0100279950FE21DF251E
-trigger 600603010101
-send 01000A995080CA00FE02DF2500
-
-
-interval 50
-send 01000799500170800100^M
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0170800100
-# 	MANAGE CHANNEL
-
-#  600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000499509000 HCI SMX wired APDU: data exchange
-#	APDU: 9000
-#	I - Command successfully executed (OK).
-
-send 220302C001^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply always On
-# 42030100
-# 0100029961 HCI SMX wired APDU: end of APDU transfer
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>

proprietary/vendor/etc/sn100u_pnx_ese_keyset.pnscr

@@ -1,159 +0,0 @@
-reset 1
-interval 50
-
-#flushing i2c buffer
-send  20000100^M
-send  20000100^M 
-send  20000100^M
-
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100   
-# 60000A020020040500A4011007
-# <<CORE_RESET_NTF>> CORE_RESET_CMD received
-# NCI RF Configuration has been kept   NCI 2.0   Model ID:00 HW ID:A4 FW:01.10.07
-send 2001020000
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400   
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100^M
-# 60000A020020040500A4011007^M<<CORE_RESET_NTF>> CORE_RESET_CMD received
-#  NCI RF Configuration has been kept^MNCI 2.0^MModel ID:00 HW ID:A4 FW:01.10.07
-send 2001020000^M
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400^M
-send 2F0200^M
-# -=(NCI_PROPRIETARY_ACT_CMD)=-
-# 4F02050000010AE3
-send 2F000101^M
-# -=(CORE_SET_POWER_MODE_CMD)=- Standby Mode enabled
-# 4F000100
-
-send 220000^M
-# -=(NFCEE_DISCOVER_CMD)=-
-# 4200020003^M3 NFCEE found
-# 6200088001000103010200^M<<NFCEE_DISCOVER_NTF>> 80 disabled
-#  Host ID:02
-#  NFCC has no control of the NFCEE power supply
-# 6200088101000103018100^M<<NFCEE_DISCOVER_NTF>> 81 disabled
-#  Host ID:81
-#  NFCC has no control of the NFCEE power supply
-# 620008C00100010301C001^M<<NFCEE_DISCOVER_NTF>> C0 disabled
-#  Host ID:C0
-#  NFCC has control of the NFCEE power supply
-send 010003810201[1;35m HCI admin: get session id
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000A818046F7656673F76566[1;35m HCI admin: any ok
-# 010007810103028182C0[1;35m HCI admin: set whitelist
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100028180[1;35m HCI admin: any ok
-send 2201028001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 80
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 2201028101^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 81
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 610A06010003C08004^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Apl-IsoDep
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-send 010003810204 
-# HCI admin: get host list
-# 610A06010003C08104^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Bpl-IsoDep
-# 010004818000C0 HCI admin: any ok
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 610A06010003C08203^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Fpl-T3T
-
-send 21012400075202C0394103C03B04010300010301030001050003C03B000003C03B010003C03B02^M
-# -=(RF_SET_LISTEN_MODE_ROUTING_CMD)=-
-#  Power state: RFU | RFU | Sub3 | Sub2 | Sub1 | BatOff | SwOff | SwOn
-#  Sub1: No Screen Unlocked, Sub2: Screen Locked, Sub3: No Screen Locked
-#  AID {Blocked, Prefix} [Route:C0, Power:39, AID:*]
-#  Proto {Blocked} [Route:C0, Power:3B, Proto:IsoDep]
-#  Proto [Route:00, Power:01, Proto:T3T]
-#  Proto [Route:00, Power:01, Proto:NfcDep]
-#  Techo [Route:C0, Power:3B, Techno:A]
-#  Techo [Route:C0, Power:3B, Techno:B]
-#  Techo [Route:C0, Power:3B, Techno:F]
-# 41010100
-
-send 21030703800181018201^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  Apl Bpl Fpl
-# 41030100
-send 20090100^M
-# -=(CORE_SET_POWER_SUB_STATE_CMD)=- Screen On Unlocked
-# 40090100
-send 2103150A0001010102010301800181018201830106017001^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  App Bpp Fpp Aap Apl Bpl Fpl Aal 15693pp Koviopp
-# 41030100
-
-
-
-
-# use dwp
-send 220302C003^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply and link always On
-# 42030100
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-interval 100
-send 01000799500070000001 
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0070000001
-# 	MANAGE CHANNEL
-
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100059950019000 HCI SMX wired APDU: data exchange
-
-
-# send 010010995001A4040009A00000015141434C00^M
-# HCI SMX wired APDU: data exchange
-# 	APDU: 01A4040009A00000015141434C00
-# 	SELECT ARA-M
-
-# ESE Attributes
-# select ISD
-send 01000F995000A4040008A000000151000000
-
-# get CPLC
-# send 010007995080CA9F7F00
-# get Free
-# send 01000A995080CA00FE02DF2500
-# get Keyset
-# 01002A9950E024C00401308810C00402308810C00403308810C00401208010C00402208010C004032080109000
-trigger 01002A9950E024
-trigger 600603010101
-send 010007995080CA00E000
-
-interval 50
-send 01000799500170800100^M
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0170800100
-# 	MANAGE CHANNEL
-
-#  600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000499509000 HCI SMX wired APDU: data exchange
-#	APDU: 9000
-#	I - Command successfully executed (OK).
-
-send 220302C001^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply always On
-# 42030100
-# 0100029961 HCI SMX wired APDU: end of APDU transfer
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>

proprietary/vendor/etc/sn100u_pnx_ese_sei2c_disable.pnscr

@@ -1,138 +0,0 @@
-reset 1
-interval 50
-
-#flushing i2c buffer
-send  20000100^M
-send  20000100^M
-send  20000100^M
-
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100
-# 60000A020020040500A4011007
-# <<CORE_RESET_NTF>> CORE_RESET_CMD received
-# NCI RF Configuration has been kept   NCI 2.0   Model ID:00 HW ID:A4 FW:01.10.07
-send 2001020000
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100^M
-# 60000A020020040500A4011007^M<<CORE_RESET_NTF>> CORE_RESET_CMD received
-#  NCI RF Configuration has been kept^MNCI 2.0^MModel ID:00 HW ID:A4 FW:01.10.07
-send 2001020000^M
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400^M
-send 2F0200^M
-# -=(NCI_PROPRIETARY_ACT_CMD)=-
-# 4F02050000010AE3
-send 2F000101^M
-# -=(CORE_SET_POWER_MODE_CMD)=- Standby Mode enabled
-# 4F000100
-
-send 220000^M
-# -=(NFCEE_DISCOVER_CMD)=-
-# 4200020003^M3 NFCEE found
-# 6200088001000103010200^M<<NFCEE_DISCOVER_NTF>> 80 disabled
-#  Host ID:02
-#  NFCC has no control of the NFCEE power supply
-# 6200088101000103018100^M<<NFCEE_DISCOVER_NTF>> 81 disabled
-#  Host ID:81
-#  NFCC has no control of the NFCEE power supply
-# 620008C00100010301C001^M<<NFCEE_DISCOVER_NTF>> C0 disabled
-#  Host ID:C0
-#  NFCC has control of the NFCEE power supply
-send 010003810201
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000A818046F7656673F76566[1;35m HCI admin: any ok
-# 010007810103028182C0[1;35m HCI admin: set whitelist
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100028180[1;35m HCI admin: any ok
-send 2201028001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 80
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 2201028101^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 81
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 610A06010003C08004^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Apl-IsoDep
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-send 010003810204
-# HCI admin: get host list
-# 610A06010003C08104^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Bpl-IsoDep
-# 010004818000C0 HCI admin: any ok
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 610A06010003C08203^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Fpl-T3T
-
-send 21012400075202C0394103C03B04010300010301030001050003C03B000003C03B010003C03B02^M
-# -=(RF_SET_LISTEN_MODE_ROUTING_CMD)=-
-#  Power state: RFU | RFU | Sub3 | Sub2 | Sub1 | BatOff | SwOff | SwOn
-#  Sub1: No Screen Unlocked, Sub2: Screen Locked, Sub3: No Screen Locked
-#  AID {Blocked, Prefix} [Route:C0, Power:39, AID:*]
-#  Proto {Blocked} [Route:C0, Power:3B, Proto:IsoDep]
-#  Proto [Route:00, Power:01, Proto:T3T]
-#  Proto [Route:00, Power:01, Proto:NfcDep]
-#  Techo [Route:C0, Power:3B, Techno:A]
-#  Techo [Route:C0, Power:3B, Techno:B]
-#  Techo [Route:C0, Power:3B, Techno:F]
-# 41010100
-
-send 21030703800181018201^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  Apl Bpl Fpl
-# 41030100
-send 20090100^M
-# -=(CORE_SET_POWER_SUB_STATE_CMD)=- Screen On Unlocked
-# 40090100
-send 2103150A0001010102010301800181018201830106017001^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  App Bpp Fpp Aap Apl Bpl Fpl Aal 15693pp Koviopp
-# 41030100
-
-# use dwp
-send 220302C003^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply and link always On
-# 42030100
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-interval 100
-send 010016995000A404000EA00000039654540000000140010100
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0070000001
-# 	MANAGE CHANNEL
-
-interval 100
-
-#01000F9950002608E56461747C13709F9000
-trigger 01000F995000
-send 010090995000D6000089400B0400000FF881803ED7447EAD8DFBE0D6847323766622E08F0181C29007943FE2CBE783605A516E4C041E93480F6FAA6EE79214CE864A6274AC25BDD76AC6411827426F17984F30811BC69642FA1D734F581ACC9B705B74E638036191D081ECE4B7F826ED89B3FB90536414586E097192EC11A1BDE3711A0B38B16D4F9210BD3DAA62B0121C4B86
-# HCI eSE wired APDU: data exchange
-
-# HCI eSE wired APDU: data exchange
-
-#01000F99500027082747A0121EDABB639000
-interval 100
-trigger 01000F995000
-send 01008E995000D6000087404A0260208180C438A987E3DF3D040B1BA5C7A3D352C4397E614FB271DBE957333B4B3C14FB7F0DBAEFD47F49DFDC222EBDEAA8F3D7944EA56FD99BE463D37893C3948140509ECAB9A7B5F908CEC7436A67CD936DE7A67BF0EC684FE6DF691702C113C818E354607E3E1C956A443EF3C584A2E7EF59B54981E79FC2A53DE923BD186421C00FC3
-
-interval 100
-
-send 220302C001^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply always On
-# 42030100
-# 0100029961 HCI SMX wired APDU: end of APDU transfer
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>

proprietary/vendor/etc/sn100u_pnx_ese_sei2c_enable.pnscr

@@ -1,136 +0,0 @@
-reset 1
-interval 50
-
-#flushing i2c buffer
-send  20000100^M
-send  20000100^M
-send  20000100^M
-
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100
-# 60000A020020040500A4011007
-# <<CORE_RESET_NTF>> CORE_RESET_CMD received
-# NCI RF Configuration has been kept   NCI 2.0   Model ID:00 HW ID:A4 FW:01.10.07
-send 2001020000
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100^M
-# 60000A020020040500A4011007^M<<CORE_RESET_NTF>> CORE_RESET_CMD received
-#  NCI RF Configuration has been kept^MNCI 2.0^MModel ID:00 HW ID:A4 FW:01.10.07
-send 2001020000^M
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400^M
-send 2F0200^M
-# -=(NCI_PROPRIETARY_ACT_CMD)=-
-# 4F02050000010AE3
-send 2F000101^M
-# -=(CORE_SET_POWER_MODE_CMD)=- Standby Mode enabled
-# 4F000100
-
-send 220000^M
-# -=(NFCEE_DISCOVER_CMD)=-
-# 4200020003^M3 NFCEE found
-# 6200088001000103010200^M<<NFCEE_DISCOVER_NTF>> 80 disabled
-#  Host ID:02
-#  NFCC has no control of the NFCEE power supply
-# 6200088101000103018100^M<<NFCEE_DISCOVER_NTF>> 81 disabled
-#  Host ID:81
-#  NFCC has no control of the NFCEE power supply
-# 620008C00100010301C001^M<<NFCEE_DISCOVER_NTF>> C0 disabled
-#  Host ID:C0
-#  NFCC has control of the NFCEE power supply
-send 010003810201
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000A818046F7656673F76566[1;35m HCI admin: any ok
-# 010007810103028182C0[1;35m HCI admin: set whitelist
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100028180[1;35m HCI admin: any ok
-send 2201028001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 80
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 2201028101^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 81
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 610A06010003C08004^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Apl-IsoDep
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-send 010003810204
-# HCI admin: get host list
-# 610A06010003C08104^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Bpl-IsoDep
-# 010004818000C0 HCI admin: any ok
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 610A06010003C08203^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Fpl-T3T
-
-send 21012400075202C0394103C03B04010300010301030001050003C03B000003C03B010003C03B02^M
-# -=(RF_SET_LISTEN_MODE_ROUTING_CMD)=-
-#  Power state: RFU | RFU | Sub3 | Sub2 | Sub1 | BatOff | SwOff | SwOn
-#  Sub1: No Screen Unlocked, Sub2: Screen Locked, Sub3: No Screen Locked
-#  AID {Blocked, Prefix} [Route:C0, Power:39, AID:*]
-#  Proto {Blocked} [Route:C0, Power:3B, Proto:IsoDep]
-#  Proto [Route:00, Power:01, Proto:T3T]
-#  Proto [Route:00, Power:01, Proto:NfcDep]
-#  Techo [Route:C0, Power:3B, Techno:A]
-#  Techo [Route:C0, Power:3B, Techno:B]
-#  Techo [Route:C0, Power:3B, Techno:F]
-# 41010100
-
-send 21030703800181018201^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  Apl Bpl Fpl
-# 41030100
-send 20090100^M
-# -=(CORE_SET_POWER_SUB_STATE_CMD)=- Screen On Unlocked
-# 40090100
-send 2103150A0001010102010301800181018201830106017001^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  App Bpp Fpp Aap Apl Bpl Fpl Aal 15693pp Koviopp
-# 41030100
-
-# use dwp
-send 220302C003^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply and link always On
-# 42030100
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-interval 100
-send 010016995000A404000EA00000039654540000000140010100
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0070000001
-# 	MANAGE CHANNEL
-
-interval 100
-
-trigger 01000F995000
-send 010090995000D6000089400B0400000FFC8180204B06DBC1E82A12C441223D5AB17BA3EC6EF62AF4A626A3BFC388C7F6F1EE47BFC86F625DA2FC36AE76FA93AC0806ECC6AF404B48A17D881FD82694BACF27BC8AD840077ECC79778989085B41CA755632D800039E2DC74A50CA5A42519F81708EEE565FB4FEC605C17D280CAF77FB414C82D378E4482AC43670533B4B37E63F
-# HCI eSE wired APDU: data exchange
-
-# HCI eSE wired APDU: data exchange
-
-interval 100
-trigger 01000F995000
-send 01008E995000D6000087404A02602281802D9D8679E8EF140FA3318D3669B0207427DD4071F38CAB94F61655F3759C515A10FE480831289999CB140335202039FE9E5C630EAE8661DD76CE232D19E161AAD41F4707A3C34151B65E7C0084E322EC056A7CD679C8EC116AB6AC27D86EFA4AD49F6E22A4696CD3FCF08D31A36C1C30BC955E829B5CCCD5023F9D9DB97E85B5
-
-interval 100
-
-send 220302C001^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply always On
-# 42030100
-# 0100029961 HCI SMX wired APDU: end of APDU transfer
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>

proprietary/vendor/etc/sn100u_pnx_ese_sei2c_read.pnscr

@@ -1,144 +0,0 @@
-reset 1
-interval 50
-
-#flushing i2c buffer
-send  20000100^M
-send  20000100^M
-send  20000100^M
-
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100
-# 60000A020020040500A4011007
-# <<CORE_RESET_NTF>> CORE_RESET_CMD received
-# NCI RF Configuration has been kept   NCI 2.0   Model ID:00 HW ID:A4 FW:01.10.07
-send 2001020000
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100^M
-# 60000A020020040500A4011007^M<<CORE_RESET_NTF>> CORE_RESET_CMD received
-#  NCI RF Configuration has been kept^MNCI 2.0^MModel ID:00 HW ID:A4 FW:01.10.07
-send 2001020000^M
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400^M
-send 2F0200^M
-# -=(NCI_PROPRIETARY_ACT_CMD)=-
-# 4F02050000010AE3
-send 2F000101^M
-# -=(CORE_SET_POWER_MODE_CMD)=- Standby Mode enabled
-# 4F000100
-
-send 220000^M
-# -=(NFCEE_DISCOVER_CMD)=-
-# 4200020003^M3 NFCEE found
-# 6200088001000103010200^M<<NFCEE_DISCOVER_NTF>> 80 disabled
-#  Host ID:02
-#  NFCC has no control of the NFCEE power supply
-# 6200088101000103018100^M<<NFCEE_DISCOVER_NTF>> 81 disabled
-#  Host ID:81
-#  NFCC has no control of the NFCEE power supply
-# 620008C00100010301C001^M<<NFCEE_DISCOVER_NTF>> C0 disabled
-#  Host ID:C0
-#  NFCC has control of the NFCEE power supply
-send 010003810201
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000A818046F7656673F76566[1;35m HCI admin: any ok
-# 010007810103028182C0[1;35m HCI admin: set whitelist
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100028180[1;35m HCI admin: any ok
-send 2201028001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 80
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 2201028101^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 81
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 610A06010003C08004^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Apl-IsoDep
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-send 010003810204
-# HCI admin: get host list
-# 610A06010003C08104^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Bpl-IsoDep
-# 010004818000C0 HCI admin: any ok
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 610A06010003C08203^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Fpl-T3T
-
-send 21012400075202C0394103C03B04010300010301030001050003C03B000003C03B010003C03B02^M
-# -=(RF_SET_LISTEN_MODE_ROUTING_CMD)=-
-#  Power state: RFU | RFU | Sub3 | Sub2 | Sub1 | BatOff | SwOff | SwOn
-#  Sub1: No Screen Unlocked, Sub2: Screen Locked, Sub3: No Screen Locked
-#  AID {Blocked, Prefix} [Route:C0, Power:39, AID:*]
-#  Proto {Blocked} [Route:C0, Power:3B, Proto:IsoDep]
-#  Proto [Route:00, Power:01, Proto:T3T]
-#  Proto [Route:00, Power:01, Proto:NfcDep]
-#  Techo [Route:C0, Power:3B, Techno:A]
-#  Techo [Route:C0, Power:3B, Techno:B]
-#  Techo [Route:C0, Power:3B, Techno:F]
-# 41010100
-
-send 21030703800181018201^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  Apl Bpl Fpl
-# 41030100
-send 20090100^M
-# -=(CORE_SET_POWER_SUB_STATE_CMD)=- Screen On Unlocked
-# 40090100
-send 2103150A0001010102010301800181018201830106017001^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  App Bpp Fpp Aap Apl Bpl Fpl Aal 15693pp Koviopp
-# 41030100
-
-
-
-
-# use dwp
-send 220302C003^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply and link always On
-# 42030100
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-interval 100
-send 010016995000A404000EA00000039654540000000140010100
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0070000001
-# 	MANAGE CHANNEL
-
-
-
-interval 100
-
-trigger 0100169950400B0400000F
-send 01008B995000B0000084400B81805E2E32BC07F38EAD7A5A82B7789C35783720E72C1891DF86295A91394A55876580E5E5DF657EDD5B1D5432D36D950DA2D3382F8FCAC9F509E71B1988BDBBDD0159B28564ED195CC5B277726B7A3541A9FB0CD1586BFB8FDE4EC23BAD7D7F075ADCEE3D7DF47B2BFB27EE69E77ADFA59DEB323DD1EE0EAB832B606161F6850E18
-# HCI eSE wired APDU: data exchange
-
-
-# HCI eSE wired APDU: data exchange
-
-interval 100
-trigger 0100149950404A0260
-send 01008B995000B0000084404A81806E2897ACBB501B87787148679712BAF3CF9E7929E701A474A8B076F5351D3580DA969BEB772E92DD795BD8ACA805192680C99D1DE4B02CA75E2064AF91F5D5146BDC99EA766FA25D7D30E1416840A6F287A569430B7146BF485A4CEFC3EE28EA4021987D7B4EC4645646EFE22359A3354E211FF8A26E4AF21425BB6C8B4134C9
-
-
-
-interval 100
-
-send 220302C001^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply always On
-# 42030100
-# 0100029961 HCI SMX wired APDU: end of APDU transfer
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>

proprietary/vendor/etc/sn100u_pnx_ese_sn.pnscr

@@ -1,166 +0,0 @@
-reset 1
-interval 50
-
-#flushing i2c buffer
-send  20000100^M
-send  20000100^M 
-send  20000100^M
-
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100   
-# 60000A020020040500A4011007
-# <<CORE_RESET_NTF>> CORE_RESET_CMD received
-# NCI RF Configuration has been kept   NCI 2.0   Model ID:00 HW ID:A4 FW:01.10.07
-send 2001020000
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400   
-send 20000100^M
-# -=(CORE_RESET_CMD)=- Keep Configuration
-# 40000100^M
-# 60000A020020040500A4011007^M<<CORE_RESET_NTF>> CORE_RESET_CMD received
-#  NCI RF Configuration has been kept^MNCI 2.0^MModel ID:00 HW ID:A4 FW:01.10.07
-send 2001020000^M
-# -=(CORE_INIT_CMD)=- NCI2.0
-# 400120001A3E0600010604FFFF01FF0008000001010002000301018000820083008400^M
-send 2F0200^M
-# -=(NCI_PROPRIETARY_ACT_CMD)=-
-# 4F02050000010AE3
-send 2F000101^M
-# -=(CORE_SET_POWER_MODE_CMD)=- Standby Mode enabled
-# 4F000100
-
-send 220000^M
-# -=(NFCEE_DISCOVER_CMD)=-
-# 4200020003^M3 NFCEE found
-# 6200088001000103010200^M<<NFCEE_DISCOVER_NTF>> 80 disabled
-#  Host ID:02
-#  NFCC has no control of the NFCEE power supply
-# 6200088101000103018100^M<<NFCEE_DISCOVER_NTF>> 81 disabled
-#  Host ID:81
-#  NFCC has no control of the NFCEE power supply
-# 620008C00100010301C001^M<<NFCEE_DISCOVER_NTF>> C0 disabled
-#  Host ID:C0
-#  NFCC has control of the NFCEE power supply
-send 010003810201[1;35m HCI admin: get session id
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000A818046F7656673F76566[1;35m HCI admin: any ok
-# 010007810103028182C0[1;35m HCI admin: set whitelist
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100028180[1;35m HCI admin: any ok
-send 2201028001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 80
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 2201028101^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled 81
-# 42010100
-# 62010103^MOUPS! status failed
-send 010003810204 
-# HCI admin: get host list
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 010003818000 HCI admin: any ok
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 610A06010003C08004^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Apl-IsoDep
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-send 010003810204 
-# HCI admin: get host list
-# 610A06010003C08104^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Bpl-IsoDep
-# 010004818000C0 HCI admin: any ok
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 610A06010003C08203^M<<RF_NFCEE_DISCOVERY_REQ_NTF>> add:C0-Fpl-T3T
-
-send 21012400075202C0394103C03B04010300010301030001050003C03B000003C03B010003C03B02^M
-# -=(RF_SET_LISTEN_MODE_ROUTING_CMD)=-
-#  Power state: RFU | RFU | Sub3 | Sub2 | Sub1 | BatOff | SwOff | SwOn
-#  Sub1: No Screen Unlocked, Sub2: Screen Locked, Sub3: No Screen Locked
-#  AID {Blocked, Prefix} [Route:C0, Power:39, AID:*]
-#  Proto {Blocked} [Route:C0, Power:3B, Proto:IsoDep]
-#  Proto [Route:00, Power:01, Proto:T3T]
-#  Proto [Route:00, Power:01, Proto:NfcDep]
-#  Techo [Route:C0, Power:3B, Techno:A]
-#  Techo [Route:C0, Power:3B, Techno:B]
-#  Techo [Route:C0, Power:3B, Techno:F]
-# 41010100
-
-send 21030703800181018201^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  Apl Bpl Fpl
-# 41030100
-send 20090100^M
-# -=(CORE_SET_POWER_SUB_STATE_CMD)=- Screen On Unlocked
-# 40090100
-send 2103150A0001010102010301800181018201830106017001^M
-# -=([1;32mRF_DISCOVER_CMD)=-
-#  App Bpp Fpp Aap Apl Bpl Fpl Aal 15693pp Koviopp
-# 41030100
-
-
-
-
-# use dwp
-send 220302C003^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply and link always On
-# 42030100
-send 220102C001^M
-# -=(NFCEE_MODE_SET_CMD)=- enabled C0
-# 42010100
-# 62010100^M<<NFCEE_MODE_SET_NTF>>
-interval 100
-send 01000799500070000001 
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0070000001
-# 	MANAGE CHANNEL
-
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 0100059950019000 HCI SMX wired APDU: data exchange
-
-
-# send 010010995001A4040009A00000015141434C00^M
-# HCI SMX wired APDU: data exchange
-# 	APDU: 01A4040009A00000015141434C00
-# 	SELECT ARA-M
-
-# ESE Attributes
-# select ISD
-send 01000F995000A4040008A000000151000000
-
-# get CPLC
-# send 010007995080CA9F7F00
-
-# get Free
-# send 01000A995080CA00FE02DF2500
-
-# get Keyset
-# send 010007995080CA00E000
-
-# get Fabkey
-# send 01000A995080CA00FE02DF2300
-
-# get SN
-trigger 0100219950FE1BDF2118
-trigger 600603010101
-send 01000A995080CA00FE02DF2100
-
-interval 50
-send 01000799500170800100^M
-# HCI SMX wired APDU: data exchange
-# 	APDU: 0170800100
-# 	MANAGE CHANNEL
-
-#  600603010101^M<<CORE_CONN_CREDITS_NTF>>
-# 01000499509000 HCI SMX wired APDU: data exchange
-#	APDU: 9000
-#	I - Command successfully executed (OK).
-
-send 220302C001^M
-# -=(NFCEE_POWER_AND_LINK_CNTRL_CMD)=- C0 NFCEE Power supply always On
-# 42030100
-# 0100029961 HCI SMX wired APDU: end of APDU transfer
-# 600603010101^M<<CORE_CONN_CREDITS_NTF>>

proprietary/vendor/etc/sn100u_pnx_ndi.pnscr

@@ -1,16 +0,0 @@
-reset 0
-reset 1
-interval 50
-
-#flushing i2c buffer
-# core reset
-send 20000101
-# core init
-send 2001020000
-# enable standby mode
-send 2F000101
-# read die-id
-trigger 4003150001A00110
-send 20030301A001
-
-reset 0

proprietary/vendor/etc/sn100u_pnx_pcv.pnscr

@@ -1,10 +0,0 @@
-reset 0
-reset 1
-interval 50
-
-# core_reset_ntf
-trigger 6000
-# core_reset_rsp
-trigger 40000100
-# core reset
-send 20000101

proprietary/vendor/etc/sn100u_pnx_sst.pnscr

@@ -1,24 +0,0 @@
-reset 0
-reset 1
-interval 50
-
-#flushing i2c buffer
-# core reset
-send 20000101
-# core init
-send 2001020000
-send 2F0200
-
-trigger 6F3E02
-trigger 4F3E01
-send 2F3E0100
-
-trigger 6F3E02
-trigger 4F3E01
-send 2F3E0101
-
-trigger 6F3E02
-trigger 4F3E01
-send 2F3E0102
-
-reset 0

sm8450-common-vendor.mk

@@ -356,15 +356,6 @@ PRODUCT_COPY_FILES += \
     vendor/xiaomi/sm8450-common/proprietary/vendor/etc/init/vmmgr.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vmmgr.rc \
     vendor/xiaomi/sm8450-common/proprietary/vendor/etc/init/vppservice.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vppservice.rc \
     vendor/xiaomi/sm8450-common/proprietary/vendor/etc/init/wfdvndservice.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/wfdvndservice.rc \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/libnfc-SN220.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-SN220.conf \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/libnfc-mtp-SN100.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-mtp-SN100.conf \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/libnfc-mtp-SN100_38_4MHZ.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-mtp-SN100_38_4MHZ.conf \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/libnfc-nci.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nci.conf \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/libnfc-nxp-pnscr.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nxp-pnscr.conf \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/libnfc-nxp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nxp.conf \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/libnfc-nxp_RF.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nxp_RF.conf \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/libnfc-qrd-SN100.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-qrd-SN100.conf \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/libnfc-qrd-SN100_38_4MHZ.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-qrd-SN100_38_4MHZ.conf \
     vendor/xiaomi/sm8450-common/proprietary/vendor/etc/lm/AdaptLaunchFeature.xml:$(TARGET_COPY_OUT_VENDOR)/etc/lm/AdaptLaunchFeature.xml \
     vendor/xiaomi/sm8450-common/proprietary/vendor/etc/lm/AppClassifierFeature.xml:$(TARGET_COPY_OUT_VENDOR)/etc/lm/AppClassifierFeature.xml \
     vendor/xiaomi/sm8450-common/proprietary/vendor/etc/lm/LightningLaunchesFeature.xml:$(TARGET_COPY_OUT_VENDOR)/etc/lm/LightningLaunchesFeature.xml \
@@ -490,25 +481,6 @@ PRODUCT_COPY_FILES += \
     vendor/xiaomi/sm8450-common/proprietary/vendor/etc/seccomp_policy/wfdhdcphalservice.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/wfdhdcphalservice.policy \
     vendor/xiaomi/sm8450-common/proprietary/vendor/etc/seccomp_policy/wfdvndservice.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/wfdvndservice.policy \
     vendor/xiaomi/sm8450-common/proprietary/vendor/etc/seccomp_policy/wifidisplayhalservice.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/wifidisplayhalservice.policy \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_bootup.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_bootup.pnscr \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_ese_disableIso.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_ese_disableIso.pnscr \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_ese_disableIsoRead.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_ese_disableIsoRead.pnscr \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_nfcon.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_nfcon.pnscr \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_pnx_chr.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_pnx_chr.pnscr \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_pnx_cui.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_pnx_cui.pnscr \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_pnx_ese_3.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_pnx_ese_3.pnscr \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_pnx_ese_aclog.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_pnx_ese_aclog.pnscr \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_pnx_ese_cplc.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_pnx_ese_cplc.pnscr \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_pnx_ese_fabkey.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_pnx_ese_fabkey.pnscr \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_pnx_ese_free.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_pnx_ese_free.pnscr \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_pnx_ese_keyset.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_pnx_ese_keyset.pnscr \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_pnx_ese_sei2c_disable.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_pnx_ese_sei2c_disable.pnscr \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_pnx_ese_sei2c_enable.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_pnx_ese_sei2c_enable.pnscr \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_pnx_ese_sei2c_read.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_pnx_ese_sei2c_read.pnscr \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_pnx_ese_sn.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_pnx_ese_sn.pnscr \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_pnx_ndi.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_pnx_ndi.pnscr \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_pnx_pcv.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_pnx_pcv.pnscr \
-    vendor/xiaomi/sm8450-common/proprietary/vendor/etc/sn100u_pnx_sst.pnscr:$(TARGET_COPY_OUT_VENDOR)/etc/sn100u_pnx_sst.pnscr \
     vendor/xiaomi/sm8450-common/proprietary/vendor/etc/ssg/ta_config.json:$(TARGET_COPY_OUT_VENDOR)/etc/ssg/ta_config.json \
     vendor/xiaomi/sm8450-common/proprietary/vendor/etc/ssg/tz_whitelist.json:$(TARGET_COPY_OUT_VENDOR)/etc/ssg/tz_whitelist.json \
     vendor/xiaomi/sm8450-common/proprietary/vendor/etc/telephony_packages.xml:$(TARGET_COPY_OUT_VENDOR)/etc/telephony_packages.xml \